AEG-Electrolux 2050D-M User Manual
Specifications and Main Features
- Model: 2050 D
- Height: 130 mm
- Width: 900 mm
- Depth: 500 mm
- Weight: 25 kg
- Total connected load: 221 W
- Fan motor: 1 x 185 W
- Lighting: 2 x 18 W
- Length of mains cable: 150 cm
- Fan outputs (levels):
- Level 1 Exhaust air: 200 m³/h
- Level 2 Exhaust air: 300 m³/h
- Level 3 Exhaust air: 410 m³/h
- Intensive Exhaust air: 585 m³/h
- Level 1 Return air: 186 m³/h
- Level 2 Return air: 270 m³/h
- Level 3 Return air: 370 m³/h
- Intensive Return air: 480 m³/h
- Exhaust air system diameter: 125 mm
Frequently Asked Questions
Q: Can the fume extractor hood operate in return air mode?
A: The appliance can be used as a return air unit after inserting an active carbon filter, thus ‘yes’ can be the right answer to this question.
Q: What is the required distance from the hob to the fume extractor hood?
A: In both electric and gas cookers this distance should never be less than 650 mm.
Q: What should I do if the filter saturation indicator lights up?
A: For the operation of two humidifier models, the fat filter requires replacement after 30 hours of usage, and for the other model the active carbon filter after 120 hours.
Q: How do I reset the filter saturation indicator?
A: Approximately four seconds following a filter exchange, push the filter reset button, this will reset the operating hours required on the counter.
Q: Is the active carbon filter washable?
A: It is needless to say, the active carbon filter is not verging on washability and it cannot be regenerated either.
Q: How can I clean the metal fat filter?
A: You can wash it in hot soapy water or use a dishwasher with the maximum wash program.
Q: What do I do if the appliance doesn't turn on?
A: Confirm that electricity supply has been ensured to the appliance and inspect the fuses.
Q: Can the appliance's lighting be changed easily?
A: Removing the fluorescent lamp is explained in the user’s manual, and it can be removed quite easily.
User Manual
Loading...