AEG Z7291 User Manual
A range of complementary cleaning
kits specially designed and
distributed by Electrolux.
To purchase any of these kits please
contact Electrolux Customer
Services on 08706 055 055.
The Animal Kit The Car Kit
Electrolux Group Floorcare Helpline
Telephone: 08706 055 055
www.electrolux.co.uk
72xx 02 01 01
Our advice
To get top performance from your vacuum
cleaner, use only Electrolux accessories.
Z7210, Z7290, Z7291
Thank you for choosing an Electrolux Cyclone Power vacuum cleaner.
These operating instructions cover all Cyclone Power models. This means
that with your specific model, some accessories may not be included.
Accessories and safety precautions 3
Before starting 4
Getting the best results 4
Removing the contents of the dust container 5
Cleaning the cartridge filter 5
Cleaning the motor filters and the micro exhaust filter 6
Cleaning the hose and nozzle 7
Troubleshooting and customer information 8
Electrical supply instructions 9
WARNING instructions 10
Guarantee 11
2
ACCESSORIES AND SAFETY PRECAUTIONS
Accessories
1. Cartridge filter
2. Plastic extension tube (Z7210)
3. Metal extension tubes (Z7290)
4. Metal telescopic tube (Z7291)
5. Hose
6. Hose handle with suction control
7. Dual purpose floor nozzle
8. Upholstery nozzle
1
2
3
4
9. Crevice nozzle (Z7290, Z7291)
10. Turbo nozzle (Z7291)
Safety precautions
The Cyclone Power should only be used by adults for normal vacuuming
in a domestic environment. The vacuum cleaner features double insula-
5
6
tion and does not need to be earthed.
Never vacuum:
• In wet areas
• Close to flammable gas, etc.
• Without filters (this may damage the cleaner). A safety device is fitted
which prevents the dust container closing without a cartridge filter in
place. Do not attempt to force the dust container shut.
Never vacuum:
7
8
9
• Sharp objects
• Fluids (this can cause serious damage to the machine)
• Hot or cold cinders, lit cigarette butts, etc.
• Fine dust from plaster, concrete, flour or ash, for example.
The above can cause serious damage to the motor - damage which is not
covered by the warranty.
Electrical cable precautions:
• A damaged cable must be replaced by an authorised Electrolux service
engineer. Damage to the cleaner cable will not be covered by the war-
10
ranty.
• Never pull or lift the vacuum cleaner by the cable.
• Disconnect the plug from the mains before cleaning or maintenance of
the vacuum cleaner.
• Regularly check that the cable is not damaged. Never use the vacuum
cleaner if the cable is damaged.
All service and repairs must be carried out by an authorised Electrolux service engineer. Always keep the vacuum cleaner in a dry place.
3
BEFORE STARTING
1. Always operate the cleaner with the dust container installed.
2. Always operate the cleaner with the filter set property installed.
3. Insert the hose until the catch clicks to engage (press the catch to
engage hose).
4. Attach the plastic tube (Z7210) or metal tubes (Z7290) or telescopic
tube (Z7291) to the hose handle and the floor nozzle.
1
2
3
5. Pull out the cable and plug it in.
6. Press the foot pedal to rewind the cable (take hold of the plug to pre-
vent it striking you).
7. Press the On/Off button to start the vacuum cleaner. Adjust the suction
power by using the linear suction control or the suction control on the
hose handle.
4
5
6
GETTING THE BEST RESULTS
Hard floors: Use the dual purpose floor nozzle with the left pedal in posi-
tion (8.)
Carpets: Use the dual purpose floor nozzle with the left pedal in
position (9.)
Reduce suction power for rugs and fabrics.
Upholstered furniture: Use the upholstery nozzle.
Skirting boards, crevices, corners, etc.: Use the crevice nozzle.
7
For the perfect care of your carpets: use the turbo nozzle. The rotary
motion of its brush gently loosens short-pile carpets where the dirt has
been trodden in. It removes stubborn fluff and pet hairs.
8
9
4
Loading...