AEG Z4709A, Z4707AZ, Z4705BZ, Z4708AZ, Z4705AZ User Manual

...
2 4
IMPORTANT INFORMATION
Upright Vacuum Clean er Owner’s Guide
Household Type
Z4700 Series
4
5
5 8
9 10
11
11
11
12
12
GUARANTEE
QUICK REFERENCE
HOW TO ASSEMBLE
HOW TO USE
ROUTINE MAINTENANCE
Empty Dust Cup
Clean Dust Cup Filter
PERIODIC MAINTENANCE
Brushroll
12
13 15
13
IMPORTANT
Please read these
instructions for
advice on the
your cleaner.
FILTER REPLACEMENT CODE: EF86b
13
14
Brushroll Belt
PROBLEM SOLVING
Clear Hose
Thermal Cut Off
Mini Turbo Nozzle
www.electrolux.co.uk
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should always be followed, in clud ing the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
WARNING
IMPORTANT INFORMATION
To reduce the risk of fi re, electric shock, or injury:
Do not use outdoors or on wet surfaces.
Do not leave vacuum cleaner whilst plugged in. Turn off the switch and unplug the electrical cord when not in
use and before servicing.
DO NOT PLACE CLEANER ON FURNITURE OR STAIRS AS THE BRUSHROLL MAY CAUSE DAMAGE.
Place cleaner on fl oor with the handle in the storage position while using attachments.
Do not allow to be used as a toy. Close attention is necessary when used by or near children.
Use only as described in this manual. Use only manufacturer’s recommended attachments.
Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, dam aged,
left outdoors, or dropped into water, return it to a service centre before using.
Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.
Do not run vacuum cleaner over cord. Keep cord away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that
may reduce airfl ow.
This vacuum cleaner creates suction and contains a revolving brushroll. Keep hair, loose clothing, fi ngers, and all parts
of body away from openings and moving parts.
Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
Do not use without the dust cup or fi lter(s) in place.
Belt pulleys can become hot during normal use. To prevent burns, avoid touching the belt pulley when servicing the drive belt.
Use extra care when cleaning on stairs.
Do not use to pick up fl ammable or combustible liquids such as gasoline, or use in areas where they may be present.
Store your cleaner indoors in a cool, dry area.
Keep your work area well lighted.
Unplug electrical appliances before vacuuming them.
PLEASE SAVE THESE INSTRUCTIONS
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city offi ce, your household waste disposal service or the shop where you purchased the product.
2
BEFORE YOU START
CHECK THE VOLTAGE
Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELEC TRIC I TY SUPPLY
Permanently connected to the clean er is a mains supply (2-core) cable fi tted with a non-rewirable plug incorporating a 13A fuse. In the event of the fuse requiring replacement the fuse cover should be re moved using a small screw driv er. The old fuse MUST
be re placed by a 13A ASTA ap proved BS1362 fuse or a BSI approved fuse. The cover must be re placed before the plug is used again. In the event of loss of the fuse cover, re place ments can be obtained from your Electrolux Retailers and must be of the same colour as indicated by the col oured insert on the base of the plug.
If diffi culty is ex pe ri enced in ob tain ing a replacement, con tact Electrolux Customer Services on 08706 055 055.
In no circumstances must the plug be used without a correct fuse cover fi tted.
If the plug that is fi tted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fi tted. Remove the fuse from the cut off plug. The cut off plug should then be dis posed of to prevent the hazard of shocks in case it should be plugged into a 13 amp socket
in another part of your home. The wires in the mains cable of this appliance are coloured in ac cord ance with the following code: Blue: Neu tral. Brown: Live. As the colours of the wires in the mains cable of this appliance may not correspond with the col oured markings iden ti fy ing the
terminals in your plug, proceed as follows: The wire which is coloured blue must be con nect ed to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be con nect ed to the terminal which is marked with the letter L or coloured red. If using a three-pin plug, do not make any con nec tion to the terminal marked with the letter E or by the earth symbol or col oured
green or green-and-yellow. This cleaner is dou ble in su lat ed and no earth con nec tion is nec es sary. It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, consult a qualifi ed elec tri cian,
as Electrolux cannot regard the repair of faults on the plug connection as a service that can be given free of charge under the terms of the guarantee.
Fuse
13 Amp Fuse
Cover
IMPORTANT INFORMATION
13 Amp
Fuse
Blue
Brown
Cord Clamp
WARNING
The brush in the cleaning head rotates at high speed and can cause damage to the mains supply cable if the cleaner passes over it during cleaning operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains supply cable the following action should be taken:
1. Switch off and remove the plug from the socket outlet.
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).
3. If the supply cord is damaged it must be replaced by a Electrolux Service Agent or similar qualifi ed person in order to avoid a
hazard.
4. NEVER use the machine with a damaged mains supply cable. Proprietary carpet conditioning and air freshening ma te ri als
After using proprietary carpet conditioning powders, it is recommended that the fi lters be changed. Some of these preparations contain sub stanc es which, if left in the vacuum cleaner for extended periods, could damage the plastic mouldings which form the structure of the cleaner. Many air fresheners, household deodorants, sprays and polishes contain a highly fl am ma ble gas propellant. Because of this, it is particularly important that these products are used strictly in ac cord ance with the relevant manufacturer’s instructions. It is essential that none of the above products are sprayed directly into the vacuum cleaner or any of its fi lters, hose assembly, dustbag chamber or dust cup.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner switches off, push the switch pedal once and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full dust cup, a blocked hose or clogged fi lter. If these conditions are found, fi x them and wait at least 60 minutes before attempting to use the cleaner. After the 60 minute period, plug the cleaner back in and push the on/off switch On (I). If the cleaner still does not run, please call Electrolux Customer Care.
3
IMPORTANT INFORMATION
SERVICE
Should you require service on your Electrolux cleaner, please telephone Electrolux Customer Services on 08706 055 055. Before requesting service, please check whether your problem is covered under Service Checklist (see below).
New fi lter pads, brushrollers and drive belts can be obtained from Electrolux Retailers. If diffi culty is experienced in obtaining spares, please contact Electrolux on 08706 055 055.
SERVICE CHECKLIST
If your cleaner will not operate, check the plug connection, plug fuse and mains fuse.
Never allow the dust cup to become so full that it impedes the airfl ow, thus reducing the cleaning effi ciency of the machine. The character of household dust and its effect on the airfl ow through the machine may vary considerably. Fluffy dust allows air to pass through readily whereas fi ne powdery dust or proprietary cleaning powders, pack tightly in the dust cup, offering greater resistance to air fl ow and will reduce cleaning effi ciency if the cup becomes overloaded.
Always store your cleaner and spare dust fi lters in a dry place.
Renew the fi lter pads three or four times a year. This is essential to ensure continued high fi ltration of dust particles.
Sucking up such items as stockings, clippings of cloth, sizeable pieces of paper, wrappings from cigarette packets or sweets etc., may block the hose. Electrolux regrets that the clearing of blocked hoses cannot be regarded as service that can be given free of charge, under the guarantee. Should a blockage occur, fi rst disconnect the cleaner from the electricity supply, refer to section headed “Block ag es.” If these op er a tions are not suc cess ful, contact Electrolux on 08706 055 055.
Never pick up hot cinders or lighted cigarette ends.
Make certain that your cleaner does not come into contact with water or any other liquid. It is not designed as a
wet pick up cleaner, and must never be used on damp carpets or wet fl oors.
Important - If the supply cord is damaged it must be replaced by a Electrolux Service Agent or similar qualifi ed person in order to avoid a hazard.
Spares
New fi lters, brushrollers and drive belts can be obtained from Authorised Electrolux Dealers and electrical retailers. If diffi culty is experienced in obtaining spares please call us on 08706 055 055 or visit our website at www.shop.electrolux.co.uk
GUARANTEE
This guarantee is in addition to your statutory and other legal rights.
This product is for household use only.
Electrolux products are carefully designed, manufactured, tested and inspected and, in consequence, we undertake to replace or repair any part found to be defective in materials or workmanship, within one year of delivery to the original purchaser, free of charge. You may be required to take the product to your nearest service provider if the product requires attention during the fi rst year.
There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in accordance with the Company’s instructions under normal
domestic conditions within the United Kingdom or the Republic of Ireland.
b. Service at all times must be carried out by an Electrolux Service Representative or authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modifi cation of the appliance.
d. You may be charged by Electrolux if you call for an engineer to resolve a problem that we believe is covered in the instruction booklet.
(example: blocked/dirty fi lters)
Electrolux does not accept liability for all defects arising from neglect, misuse or accident. This guarantee excludes such normal wearing parts as drive belts, brushes and fi lters as the life of these depends upon the amount and nature of use.
Proof of purchase will be required before service under guarantee is provided. Please call 08706 055 055 for assistance.
IMPORTANT: For future reference we suggest you record the following details here, and keep the receipt with the handbook as proof of purchase. Purchased from ____________________________________________________ Date purchased __________________Model no __________________________
GUARANTEE
101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
Features of the Electrolux vacuum cleaner and ac ces so ries supplied with it are pro tect ed in Great Britain and abroad by Patents or Registered Designs.
This appliance conforms with the requirements of the amend ed E.E.C. directive No. 89/336/EEC re lat ing to elec tro mag net ic compatibility (EMC) CE.
Electrolux may introduce modifi cations to their product from time to time, and con se quent ly the details given in this booklet are subject to alteration without notice.
4
Quick Reference
A
B
A Wand
B Crevice Tool
C Dusting Brush
D Hose
E Base
F Dust Cup with Lid and Filter
G Handle ( G1 Turbo Handle)
C
D
H
J
E
I
F
G
K
Stair Brush (some models only)
G1
QUICK REFERENCE HOW TO ASSEMBLE
H Tool Caddy
I Rear Housing
J Hose Retainer
K Stair Brush
How To Assemble
CAUTION: Assemble the cleaner completely before using.
NOTE: All screws must be installed to properly secure the
parts of the vacuum.
CAUTION: Moving parts, make sure the on/off switch is in
the off position and stay clear of the brushroll when plugging in.
NOTE: Features may vary by model yet all parts assemble
the same.
Remove all components from the carton and check that all of the parts are available from the parts list above.
(NOT provided in the package)
L1
L2
Have a Phillips screwdriver available (one is NOT provided in the package).
5
Loading...
+ 11 hidden pages