AEG L725500, L705500 User Manual

LAVAMAT 705500 - 725500

User manual Washing machine

2

Dear Customer

Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional

design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best

performance and control - indeed we are setting the highest standards of
excellence.

In addition to this you find environmental and energy saving aspects as an
integral part of our products.

To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we
recommend you to keep it in a safe place. And please pass it to any future owner
of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this manual:

Important information concerning your personal safety and information on how to
avoid damaging the appliance

General information and tips

Environmental information

Contents

Contents

Instructions for the user 6

Safety information 6

Product description 9

Detergent dispenser drawer 9

Control panel 10

Display 11
Indicator pilot lights 12

First use 13

Personalization 13

Acoustic signals 13
Child safety lock 13

3

Daily use 14

Load the laundry 14
Measure out the detergent and the fabric softener 14
Select the required programme by means of programme selector dial 15
Select the spin speed reduction or the RINSE HOLD option 15
Programme option button 16
Select the PREWASH option 16
Select the STAIN option 16
Select the SENSITIVE option 16
Select the TIME option 16
Select the START/PAUSE 17
Select the DELAY START 17
Select an additional rinse 18
Altering an option or a running programme 18
Interrupting a programme 18
Cancelling a programme 18

Contents

4

Opening the door after the programme has started 19
At the end of the programme 19

Washing programmes 20

Programme information 22

Preparing the wash cycle 23

Sorting out the laundry 23
Before loading the laundry 23
Maximum loads 23
Laundry weights 23
Removing stains 24
Detergents and additives 25
Quantity of detergent to be used 25
Degrees of water hardness 26

Care and cleaning 27

Descaling 27
After each wash 27
Maintenance wash 27
External cleaning 27
Detergent dispenser drawer 27
Washing drum 28
Door seal 28
Drain pump 29
Water inlet filter 30
Emergency emptying out 30
Frost precautions 31

What to do if... 32

Technical data 35

Consumption value 36

Contents

Installation 37

Unpacking 37
Positioning and levelling 39
Water inlet 39
Water-stop device 40
Water drainage 40
Electrical connection 41
Permanent connection 41

Environmental concerns 42

Packaging materials 42
Old machine 42
Ecological hints 42

5

Safety information

6

Instructions for the user

Safety information

Prior to using for the first time

● The safety of AEG/ELECTROLUX appliances complies with the industry

standards and with legal requirements on the safety of appliances. However,
as manufacturers, we feel it is our duty to provide the following safety notes.
You MUST read them carefully before installing or using the appliance.

● It is most important that this instruction book should be retained with the

appliance for future reference. Should the appliance be sold or transferred to
another owner, or should you move house and leave the appliance, always
ensure that the book is supplied with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant
warnings.

● You MUST read them carefully before installing or using the appliance.

● Before first starting up, check the machine for any damage incurred during

transport. Never connect up a damaged machine. If parts are damaged,
contact your supplier.

● If the appliance is delivered in the winter months when there are minus

temperatures: Store the washing machine at room temperature for 24 hours
before using for the first time.

General safety

● It is dangerous to alter the specifications or attempt to modify this product in

any way.

● During high temperature wash programmes the door glass may get hot. Do

not touch it!

● Make sure that small pets do not climb into the drum. To avoid this, please

check inside the drum before using.

● Any objects such as coins, safety pins, nails, screws, stones or any other hard,

sharp material can cause extensive damage and must not be placed into the
machine.

● Only use the advised quantities of fabric softener and detergent. Damage to

the fabric can ensue if you over-fill. Refer to the manufacturer’s
recommendations of quantities.

● Wash small items such as socks, laces, washable belts etc in a washing bag or

pillow case as it is possible for such items to slip down between the tub and
the inner drum.

● Do not use your washing machine to wash articles with whalebones, material

without hems or torn material.

● Always unplug the appliance and turn off the water supply after use,

cleaning and maintenance.

● Under no circumstances should you attempt to repair the machine yourself.

Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Centre. Always insist on genuine
spare parts.

Installation

● When unpacking the appliance, check that it is not damaged. If in doubt, do

not use it and contact the Service Centre.

● All packing and transit bolts must be removed before use. Serious damage can

occur to the product and to property if this is not adhered to. See relevant
section in the user manual.

● After having installed the appliance, check that it is not pressing or standing on

its electrical supply cable, inlet hose and drain hose.

● If the machine is situated on a carpeted floor, please adjust the feet in order to

allow air to circulate freely under the appliance.

● Always be sure, that there is no water leakage from hoses and their connections

after the installation.

● If the appliance is installed in a location subject to frost, please read the

«dangers of freezing» chapter.

● Any plumbing work required to install this appliance should be carried out by a

qualified plumber or competent person.

● Any electrical work required to install this appliance should be carried out by a

qualified electrician or competent person.

Safety information

7

Use

● This appliance is designed for domestic use. It must not be used for purposes

other than those for which it was designed.

● Only wash fabrics which are designed to be machine washed. Follow the

instructions on each garment label.

● Do not overload the appliance. See the relevant section in the user manual.

● Before washing, ensure that all pockets are empty and buttons and zips are

fastened. Avoid washing frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras must NOT be machine
washed.

Safety information

8

● Garments which have been in contact with volatile petroleum products should

not be machine washed. If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the garment before placing in
the machine.

● Never pull the power supply cable to remove the plug from the socket; always

take hold of the plug itself.

● Never use the washing machine if the power supply cable, the control panel,

the working surface or the base are damaged so that the inside of the washing
machine is accessible.

Child Safety

● This appliance is not intended for use by person (including children) with

reduced physical sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

● Young children should be supervised to ensure that they do not play with the

appliance.

● The packaging components (e.g. plastic film, polystyrene) can be dangerous to

children - danger of suffocation! Keep them out of children’s reach.

● Keep all detergents in a safe place out of children’s reach.

● Make sure that children or pets do not

climb into the drum. To prevent children
or pets becoming trapped inside the
drum the machine incorporates special
feature. To activate this device, rotate
the button (without pressing it) inside
the door clockwise until the groove is
horizontal. If necessary use a coin. To

disable this device and restore the
possibility of closing the door, rotate the
button anti-clockwise until the groove is
vertical.

Product description

Product description

Your new appliance meets all modern requirements for effective treatment of
laundry with low water, energy and detergent consumption.

EECCOO vvaallvvee

The
consumption therefore saving energy.

system allows total use of detergent and reduces water

9

Detergent dispenser drawer

1

Control panel

2

Door opening handle

3

Detergent dispenser drawer

Compartment for detergent used for prewash. The prewash detergent is
added at the beginning of the wash programme.

Compartment for powder or liquid detergent used for main wash.
Compartment for liquid additives (fabric softener, starch).
Compartment for stain remover used for main wash with STAIN-option.

Rating plate

4

Drain pump

5

Adjustable feet

6

Control panel

10

Control panel

Below is a picture of the programme selector dial, the buttons and the display will
be indicated with the numbers given in this table.

1 2 3 4 5 6 7 8 9 10

Programme selector dial

1

SPIN button (RPM)

2

PREWASH button (PRELAVADO)

3

STAIN button (MANCHAS)

4

SENSITIVE button (SENSIBLE)

5

TIME button (TIEMPO)

6

Display

7

START/PAUSE button (START/PAUSA)

8

DELAY START button (INICIO DIFERIDO)

9

Indicator pilot lights

10

Symbols:

= Rinse Hold, = Cold wash, = Handwash,

= Child safety lock

Control panel

Display (7)

7.1 7.2

7.3

7.5

7.4

7.1

Child safety lock - symbol

7.2

Duration of selected programme

After selecting a programme, the duration is displayed in hours and minutes (for
example
maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for
example

End of programme

When the programme has finished a flashing zero 0 is displayed, the symbol 7.5
disappears from the display, the pilot light of button 8 goes out and the door
can be opened.

Incorrect option selection

If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for about 2 seconds and the yellow pilot light of
button

Delay Start

The selected delay (20 hours max) set by means of the relevant button appears
on the display for about 3 seconds, then the duration of the previously selected
programme is displayed.

The symbol
unit every hour. When only 1 hour remains, the time decreases every minute.

7.3

Delay Start - symbol

2.05). The duration is calculated automatically on the basis of the

E20 (see chapter «What to do if...»).

8 light starts flashing.

7.3 will appear on the display. The delay time value decreases by one

11

Control panel

12

7.4

Programme progress display

The display shows the different washing programme phases.
After the appliance starts operating, the display show the relevant symbol of the

washing phase which is running:

SPINNING.

7.5

Door symbol

This symbol indicates if the door can be opened:

● symbol on: the door cannot be opened. The appliance is running.

● symbol off: the door can be opened. The washing programme is finished.

WASHING, RINSING, DRAINING,

Indicator pilot lights (10)

If the OVERDOSAGE pilot light 10.1 goes on at the end of
the programme, it indicates that too much detergent has been
used.

10.1

When the appliance is performing additional rinses, the
EXTRA RINSE pilot light
rinse, please see chapter «Select an additional rinse».

If your laundry is not removed during 10 minutes after the programme is finished,
the backlight of the display switches off and the energy saving system will be
enabled.

Only the button
switched off.

By pressing any button the appliance will come out from the energy saving status
and you could set another washing programme or switch off the appliance.

8 pilot light flashes to indicate that the appliance has to be

10.2 comes on. To add an additional

10.2

First Use

Ensure that the electrical and water connections comply with the installation
instructions.

Remove the polystyrene block and any material from the drum.

Pour 2 litres of water into the main wash compartment of the detergent drawer
in order to activate the ECO valve. Then run a cotton cycle at 90° or 95°C, without
any laundry in the machine, to remove any manufacturing residue from the drum
and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the
machine.

Personalization

Acoustic signals

The machine is provided with an acoustic device, which sounds in the following
cases:

● at the end of the cycle

● in the event of operating problems

By pressing the
acoustic signal is deactivated (except for the events of operating problems). By
pressing these 2 buttons again, the acoustic signal is reactivated.

3 and 4 buttons simultaneously for about 6 seconds, the

Use

13

Child safety lock (7.1)

This device permits you to leave the appliance unsupervised without having the
worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washing machine is not working.
There are two different ways to set this option:

● before pressing the button 8: it will be impossible to start the machine.

● after pressing the button 8 it will be impossible to change any other

programme or option.

To enable (disable) this option press simultaneously for about 6 seconds
buttons until the symbol 7.1 appears (disappears) on the display.

4 and 5

Use

14

Daily Use

Load the laundry

1. Open the door by carefully pulling the door

handle outwards. Place the laundry in the drum,
one item at a time, shaking them out as much
as possible.

2. Close the door firmly. You must hear a click

during closing.
Attention! Do not embed the laundry between the door and the rubber

joint.

Measure out the detergent and the
fabric softener

Your new appliance was designed to reduce
water, energy and detergent consumption.

1. Pull out the dispenser drawer until it

stops. Measure out the amount of
detergent required, pour it into the main
wash compartment . If you wish to
carry out the prewash phase, pour the
detergent into the compartment marked

. If you wish to perform the stain

function, pour the stain remover into the
compartment marked with blue arrow .

2. If required, pour fabric softener into the

compartment marked (the amount
used must not exceed the MAX mark in
the drawer). Close the drawer gently.

Use

Select the required programme by means of programme selector
dial (1)

You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.

The pilot light of button
the selected programme.

The selector dial can be turned either clockwise or anticlockwise. Turn to position
O/OFF to Reset programme/Switch OFF the machine.

At the end of the programme the selector dial must be turned to position
O/OFF, to switch the machine off.

For the description of each washing programmes of the selector dial, consult the
chapter «Washing programmes».

Attention!

If you turn the programme selector dial to another programme when the machine

is working, the yellow pilot light of button
Err is displayed on the display to indicate a wrong selection. The machine will not
perform the new selected programme.

8 starts flashing and the display shows the duration of

8 will flash 3 times and the message

15

Select the SPIN speed or the RINSE HOLD option (Button 2)

When the required programme has been selected, your appliance automatically
proposes the maximum spin speed provided for that programme.

Press the button
to be spun at a speed different from the one proposed by the washing machine.

The relevant light will light up.
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out

to prevent the fabrics from creasing.
When the programme has finished the display shows a flashing

appears on the display, the pilot light of button 8 is off and the door is locked to
indicate that the water must be emptied out.

To empty the water out please read chapter «At the end of the
programme».

2 repeatedly to change the spin speed, if you want your laundry

0, the symbo

l

7.5

Use

16

Programme option buttons

Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before depressing the
button

When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.

If an incorrect option is selected, the in yellow pilot light of the button
3 times and the Err message appears on the display for some seconds.

For the compatibility among the washing programmes and the options see
chapter «Washing Programmes».

8.

Select the PREWASH option (Button 3)

Select this option if you wish your laundry to be prewashed at 30°C before the
main wash. The prewash ends with a short spin in programmes for cotton and
synthetic fabrics, whereas in the programmes for delicate fabrics the water is
only drained.

The relevant light will light up.

Select the STAIN option (Button 4)

Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase). The relevant light
will light up.

This option is not available with a temperature lower than 40°C.
Attention! If you wish to perform a programme with the stain option, pour

stain remover into compartment .

8 flashes

Select the SENSITIVE option (Button 5)

By depressing this button the washing intensity will be reduced. The appliance
adds one rinse in the programmes for COTTONS and SYNTHETICS.

This option is recommended for non fast coloureds items and for frequently
washed items.

Select the TIME option (Button 6)

This option allows you to modify the washing time, automatically proposed by
the appliance.
DAILY: by pressing this button once, the relative pilot light comes on and the
washing duration will be reduced to wash daily soiled laundry.

SUPER QUICK: by pressing this button twice, the relative pilot light remains lit,
the washing duration will be reduced to wash lightly soiled laundry or items that
have been used or worn for a short time. The display will show the decreased
washing time.

Select the START/PAUSE (Button 8)

To start the selected programme, press the button 8, the corresponding red pilot
light stops flashing.

The WASHING symbol
appliance starts operating.

The symbol
To interrupt a programme which is running, press the button

red pilot light starts flashing.
To restart the programme from the point at which it was interrupted, press the

button
will begin the countdown. If an incorrect option is selected, the yellow pilot light
of the button
seconds.

7.5 appears on the display to indicate the door is locked.

8 again. If you have chosen a delayed start with button 9, the machine

8 flashes for 3 times the message Err is displayed for about 2

7.4 appears on the display to indicate that the

8: the corresponding

Select the DELAY START (Button 9)

Before you start the programme, if you wish to delay the start, press the
button

The selected delay time value (up to 20 hours) will appear on the display for
about 3 seconds, then the duration of the programme will appear again.

You must select this option after you have set the programme and before you
press the button

The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of 20 hours by means of this button.

If you wish to add laundry in the machine during the delay time you will press
button
button

Selecting the delayed start.

9 repeatedly, to select the desired delay.

8.

8 to put the machine in pause. Add the laundry, close the door and press
8 again.

● Select the programme and the required options.

● Select the delay start.

● Press button 8: the machine starts its hourly countdown. The programme will

start after the selected delay has expired.

Use

17

Use

18

Cancelling the delayed start

● set the washing machine to PAUSE by pressing the button 8;

● press button 9 once until the symbol 0’ is displayed;

● press the button 8 again to start the programme.

Important!

● The selected delay can be changed only after selecting the washing programme

again.

● The door will be locked throughout the delay time. If you need to open the

door, you must first set the washing machine to PAUSE by pressing the button

8. After you have closed the door, press the button 8 again.

The button

9 can not be selected with DRAIN programme.

Select an additional rinse

This appliance is designed for saving water. However, for people with a very

delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).

Press simultaneously the buttons

10.2 comes on.

This function stays permanently on. To disable it press the same buttons again
until the pilot light

10.2 goes off.

2 and 3 for some seconds: the pilot light

Altering an option or a running programme

It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button

8. Changing a running programme is possible only by resetting it. Turn

the programme selector dial to O/OFF and then to the new programme
position. Start the new programme by depressing the button

8 again. The

washing water in the tub will not be emptied out.

Interrupting a programme

Depress the button 8 to interrupt a programme which is running, the
corresponding light starts flashing. Depress the button again to restart the
programme.

Cancelling a programme

Turn the selector dial to O/OFF to cancel a programme which is running. Now
you can select a new programme.

Opening the door after the programme has started

First set the machine to pause by pressing the button 8. After some minutes the
door can be opened.

If the DOOR remains locked, this means that the machine is already heating and
that the water level is too high. In this case the door can not be opened. If you
cannot open the door but you need to open it, you have to switch the machine
off by turning the selector dial to O/OFF. After some minutes the door can be
opened (pay attention to the water level and temperature!).

After closing the door, it is necessary to select the programme and options again
and to press button

8.

At the end of the programme

The machine stops automatically, the pilot light of button 8 and the symbol 7.5
goes off and a flashing 0 will appear on the display.

If a programme or an option that ends with water still in the tub has been
selected, the symbol
pilot light of button
water must be emptied out before opening the door.

Follow the below instructions to empty out the water:

● turn the programme selector dial to O/OFF

● select the DRAINING or SPINNING programme

● reduce the spin speed if needed, by means of the relevant button

● press button 8

● when the programme has finished the display shows a flashing 0. The symbol

7.5 disappears and the door can be opened.

Turn the programme selector dial to O/OFF to switch the machine off. Remove
the laundry from the drum and carefully check that the drum is empty. If you do
not intend to carry out another wash, close the water tap. Leave the door open
to prevent the formation of mildew and unpleasant smells.

7.5 remains on, a flashing 0 will appear on the display, the

8 goes off and the door remains locked to indicate that the

Use

19

Washing programmes

20

Washing programmes

PPrrooggrraammmmee//
TTeemmppeerraattuurree

COTTONS
(ALGODÓN)

95°-30°

40-60 MIX

40°

SYNTHETICS

(SINTÉTICOS)

60°-30°

EASY IRON PLUS
(PLANCHA FÁCIL
PLUS)

40°

TTyyppee ooff llaauunnddrryy OOppttiioonnss

White and coloured
cotton

items)

(normally soiled

SPIN, RINSE HOLD,
PREWASH, STAIN*,

SENSITIVE, TIME**,

EXTRA RINSE

Coloured cotton:
work garments, sheets,
household linen,
underwear, towels

Synthetic or mixed
fabrics: underwear,

coloured garments,
non-shrink shirts,
blouses

Synthetics to be gently
washed and spun

SPIN, RINSE HOLD,

PREWASH, STAIN,
SENSITIVE, EXTRA

SPIN, RINSE HOLD,
PREWASH, STAIN*,

SENSITIVE, TIME**,

EXTRA RINSE

SPIN, RINSE HOLD,

PREWASH, EXTRA

RINSE

RINSE

DDeessccrriippttiioonn ooff

pprrooggrraammmmee

Main wash
Rinses
Long spin at maximum
spin speed
Max. load kg 7

** Red. load kg 3,5

Main wash
Rinses
Long spin at maximum
spin speed

Max. load kg 7

Main wash
Rinses
Short spin

Max. load kg 3,5
** Red. load kg 1,5

Main wash
Rinses
Short spin

Max. load kg 1,5

Main wash

DELICATES

(DELICADOS)

40°-30°

WOOL PLUS
HANDWASH
(LANA PLUS)

30°-COLD

Delicate fabrics: for
example curtains

Special programme for
hand washing fabrics
and special programme
for wool garments
bearing the «Pure new
wool, non-shrink,
machine washable» label

SPIN, RINSE HOLD,
PREWASH, STAIN*,

TIME**, EXTRA RINSE

SPIN, RINSE HOLD

Rinses
Short spin

Max. load kg 3,5
** Red. load kg 1,5

Main wash
Rinses
Short spin

Max. load kg 2

* STAIN option can be selected only at the temperature of 40°C or higher.
** If you select the SUPER QUICK option by means of TIME button, we recommend
that you reduce the maximum load as indicated. (Red. load = reduced load). Full loading
is possible however with somewhat reduced cleaning results.

Washing programmes

Washing programmes

21

PPrrooggrraammmmee//
TTeemmppeerraattuurree

DELICATE
RINSES

(ACLARADO
DELICADOS)

DRAIN
(DESCARGA)

SPIN
(CENTRIFUG.)

BLANKET/DUVET
(MANTAS/
EDREDONES)

40°

20 MIN.-3 KG

30°

QUICK
INTENSIVE
(EXPRESS
INTENSIVO)

60°

ECONOMY
(ALGODÓN ECO)

60°

TTyyppee ooff llaauunnddrryy OOppttiioonnss

Separate rinse cycle for
hand washed items

For emptying out the last
rinse water in
programmes with the
Rinse Hold option

Separate spin for cotton
fabric

Short cycle for a single
washable blanket or
duvet

Quick wash for sport
items, or cotton and
synthetics items lightly
soiled or worn once

For slightly soiled
cotton items or worn
once

White and coloured
cotton economy,

lightly-heavily soiled
items, shirts, underwear

SPIN, RINSE HOLD,

EXTRA RINSE

SPIN, RINSE HOLD,

EXTRA RINSE

SPIN, RINSE HOLD,

PREWASH, STAIN,
SENSITIVE, EXTRA

SPIN

SPIN

SPIN

RINSE

DDeessccrriippttiioonn ooff

pprrooggrraammmmee

Rinses
Short spin

Max. load kg 7

Draining of water
Max. load kg 7

Drain and long spin at
maximum spin speed
Max. load kg 7

Main wash
Rinses
Short spin

Max. load kg 2,5

Main wash
Rinses
Short spin

Max. load kg 3

Main wash
Rinses
Long spin

Max. load kg 5

Main wash
Rinses
Long spin at maximum
spin speed

Max. load kg 7

O/OFF

For cancelling the pro­gramme which is run­ning or to switch the
machine off

Programme information

22

Programme information

Selecting this programme the laundry is gently washed and

EASY IRON PLUS

spun to avoid any creasing. In this way ironing is easier.
Furthermore the machine will perform additional rinses.

WOOL PLUS
HANDWASH

DELICATE RINSES

DRAIN

SPIN

BLANKET/DUVET

20 MIN.-30 KG

Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics with
the “hand washing” care symbol .

With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final short spin

The spin speed can be reduced by pressing the button 2.

For emptying out the water of the last rinse in programmes
with the RINSE HOLD option.
Firstly, turn the programme selector dial to O/OFF, then

select programme DRAIN and press the button 8.

Separate spin for hand washed cotton garments and after
programmes with RINSE HOLD option. Before selecting this
programme the selector dial must be turned to O/OFF. You
can choose the speed by means of the relevant button to
adapt it to the fabrics to be spun.

Washing programme for a single synthetic blanket, bed­spread etc. The washing temperature is 40°C.

This programme can be selected with the following
options: Spin Speed Reduction and DELAY START.
This programme must be used for slightly soiled cotton or
synthetic items. Programme duration: 20 minutes.

QUICK INTENSIVE

ECONOMY

O/OFF

Quick washing programme, to be used for lightly soiled­white/fast coloured cottons.

This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and the
washing time will be extended. This allows you to obtain a
good washing efficiency by saving energy.

To reset a programme and to switch off the machine turn
the selector dial to O/OFF. Now can a new programme be
selected.

Preparing the wash cycle

Preparing the wash cycle

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s
washing instructions. Sort the laundry as follows: whites, coloureds, synthetics,
delicates, woollens.

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their “whiteness” in
the wash.

New coloured items may run in the first wash; they should therefore be washed
separately the first time.

Make sure that no metal objects are left in the laundry (e.g. hair clips,
safety pins, pins).

Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or
long tapes.

Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the washing programme charts.

23

Laundry weights

The following weights are indicative:

bathrobe

man’s work shirt

1200 g

100 gnapkin, tea cloth, ladies’ briefs, blouse, men’s underpants
700 gquilt cover
500 gsheet, man’s pyjamas
200 gpillow case, towelling towel, night dress, man’s shirt
250 gtablecloth
600 g

Preparing the wash cycle

24

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore
advisable to treat them prior to washing.

Blood: treat fresh stains with cold water. For dried stains, soak overnight in
water with a special detergent then rub in the soap and water.

Oil based paint::moisten with benzine stain remover, lay the garment on a soft

cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft

surface and dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be

careful with rust stains which are not recent since the cellulose structure will
have already been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft

cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated

spirits. Treat any residual marks with bleach.
Red wine: soak in water and detergent, rinse and treat with acetic or citric acid,

then rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone (*), then

with acetic acid; treat any residual marks on white fabrics with bleach and then
rinse thoroughly.

Tar stains: first treat with stain remover, methylated spirits or benzine, then rub
with detergent paste.

(*) do not use acetone on artificial silk.

Preparing the wash cycle

Detergents and additives

Good washing results also depend on the choice of detergent and use of the
correct quantities to avoid waste and protect the environment.

Although biodegradable, detergents contain substances which, in large
quantities, can upset the delicate balance of nature.

The choice of detergent will depend on the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing temperature and degree of soiling.

All commonly available washing machine detergents may be used in this
appliance:

● powder detergents for all types of fabric,

● powder detergents for delicate fabrics (60°C max) and woollens,

● liquid detergents, preferably for low temperature wash programmes (60°C

max) for all types of fabric, or special for woollens only.

The detergent and any additives must be placed in the appropriate
compartments of the dispenser drawer before starting the wash programme.

If using concentrated powder or liquid detergents, a programme without

prewash must be selected.
Pour liquid detergent into the dispenser drawer compartment marked just

before starting the programme.
Any fabric softener or starching additives must be poured into the compartment

marked before starting the wash programme.
Follow the product manufacturer’s recommendations on quantities to use and do

not exceed the «MAX» mark in the detergent dispenser drawer.

25

Quantity of detergent to be used

The type and quantity of detergent will depend on the type of fabric, load size,
degree of soiling and hardness of the water used.

Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:

• you are washing a small load,

• the laundry is lightly soiled,

• large amounts of foam form during washing.

Preparing the wash cycle

26

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on
hardness of the water in your area can be obtained from the relevant water
supply company, or from your local authority.

Note: A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s instructions.
The quantity of detergent can then always be adjusted to degree of hardness I (=
soft).

DDeeggrreeeess ooff wwaatteerr hhaarrddnneessss

Level

1
2 medium 8-14 16-25
3 hard 15-21 26-37
4 very hard > 21 > 37

Characteristic

soft

GGeerrmmaann

°°ddHH

0-7 0-15

FFrreenncchh

°°TT..HH..

Care and cleaning

Care and cleaning

You must DISCONNECT the appliance from the electricity supply, before you can
carry out any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea to periodically use a
water softening powder in the machine. Do this separately from any laundry
washing, and according to the softening powder manufacturer's instructions.

This will help to prevent the formation of lime deposits.

After each wash

Leave the door open for a while. This helps to prevent mould and stagnant smells
forming inside the appliance. Keeping the door open after a wash will also help
to preserve the door seal.

Maintenance wash

With the use of low temperature washes it is possible to get a build up of
residues inside the drum.

We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be a powder with biological
properties

.

27

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then
dry thoroughly.
Important: do not use methylated spirits, solvents or similar products to clean
the cabinet.

Detergent dispenser drawer

The detergent dispenser drawer should be
cleaned regularly.

1. Remove the detergent dispenser drawer

by pulling it firmly.

Care and cleaning

28

2. Remove the conditioner insert from the middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it will go, so that it is firmly in place.

5. Clean all parts of the washing ma-

chine, especially the nozzles in the top
of the washing-in chamber, with a
brush.

6. Insert the detergent dispenser drawer

in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless

steel.

2. Run a washing cycle without any washing to clean off any cleaning agent

residues. Programme: COTTONS/LINEN 90° or 95°C, press the button
approx. 1/4 measuring cup of detergent.

6, add

Door seal

Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in the
fold.

Drain pump

The pump should be inspected regularly and particularly if

• the machine does not empty and/or spin

• the machine makes an unusual noise during draining due to objects such as
safety pins, coins etc. blocking the pump.

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has

cooled down.

3. Open the pump door.

4. Place a container close to the pump to

collect any spillage.

Care and cleaning

29

5. Release the emergency emptying hose,

place it in the container and remove its
cap.

6. When no more water comes out,

unscrew the pump and remove it.
Always keep a rag nearby to dry up
spillage of water when removing the
pump.

7. Remove any objects from the pump

impeller by rotating it.

Care and cleaning

30

8. Put the cap back on the emergency

emptying hose and place the latter
back in its seat.

9. Screw the pump fully in.

10. Close the pump door.
Warning!

When the appliance is in use and
depending on the programme selected
there can be hot water in the pump. Never
remove the pump cover during a wash
cycle, always wait until the appliance has
finished the cycle, and is empty. When
replacing the cover, ensure it is securely retightened so as to stop leaks and
young children being able to remove it.

Water inlet filter

If you notice that the machine is taking
longer to fill, check that the filter in the
water inlet hose is not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff

brush.

4. Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has cooled down;

4. open the pump door;

5. place a bowl on the floor and place the end of the emergency emptying hose

into the bowl. Remove its cap. The water should drain by gravity into the
bowl. When the bowl is full, put the cap back on the hose. Empty the bowl.
Repeat the procedure until water stops flowing out;

6. clean the pump if necessary as previously described;

Care and cleaning

7. replace the emergency emptying hose in its seat after having plugged it;

8. screw the pump again and close the door.

Frost precautions

If the machine is installed in a place where the temperature could drop below
0°C, proceed as follows:

1. Close the water tap and unscrew the water inlet hose from the tap.

2. Place the end of the emergency emptying hose and that of the inlet hose in a

bowl placed on the floor and let water drain out.

3. Screw the water inlet hose back on and reposition the emergency emptying

hose after having put the cap on again

By doing this, any water remaining in the machine is removed, avoiding ice
forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is
above 0°C.

Important! Every time you drain the water through the emergency emptying
hose you must pour 2 litres of water into the main wash compartment of the
detergent drawer and then run the drain programme. This will activate the ECO
VALVE device.

.

31

What to do if...

32

What to do if...

Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service Centre,
please carry out the checks listed below.

During machine operation it is possible that the
of the following alarm codes appears on the display and at the same time some acoustic
signals sound every 20 seconds to indicate that the machine is not working:

• E10 : problem with the water supply

• E20 : problem with the water draining

• E40 : door open.

Once the problem has been eliminated, press the button
after all checks, the problem persists, contact your local Service Centre.

Problem Possible cause/Solution

The door has not been closed. E40

• Close the door firmly.
The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.
There is no power at the socket.

• Please check your domestic electrical installation.
The main fuse has blown.

The washing machine does not
start:

• Replace the fuse.
The selector dial is not correctly positioned and the

button

• Please turn the selector dial and press the button 8

again.

The delay start has been selected.

• If the laundry is to be washed immediately, cancel

the delay start.

The CHILD SAFETY LOCK has been activated.

• Deactivate this device.

yyeellllooww

pilot light of button 8 flashes, one

8 to restart the programme. If

8 has not been pressed.

The machine does not fill:

The water tap is closed. E10

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose is blocked.

• Clean the water inlet hose filter.

The door is not properly closed.

• Close the door firmly.

E40

E10

E10

Problem Possible cause/Solution

The machine fills then empties
immediately:

The machine does not empty
and/or does not spin:

There is water on the floor:

What to do if...

The end of the drain hose is too low.

• Refer to relevant paragraph in «water drainage»

section.

The drain hose is squashed or kinked. E20

• Check the drain hose connection.

The drain filter is clogged.

• Clean the drain filter.

An option or a programme that ends with the water
still in the tub or a that eliminates all the spinning
phases has been selected.

• Select the draining or the spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Too much detergent or unsuitable detergent (creates
too much foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.

• Check the water inlet hose connection.

The drain or inlet hose is damaged.

• Replace it with a new one.

The cap on the emergency emptying hose has not
been replaced or the filter has not been properly
screwed in after cleaning action.

• Refit the cap on the hose or screw the filter fully in.

E20

33

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has been
used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to
washing.

• Use commercial products to treat the stubborn

stains

.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

What to do if...

34

Problem Cause possible/Solution

The door will not open:

The machine vibrates or is noisy:

Spinning starts late or the machine
does not spin:

The programme is still running.

• Wait until the end of washing cycle.

The door lock has not been released.

• Wait until the DOOR symbol

There is water in the drum.

• Select drain or spin programme to empty out the

water.

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted.

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

May be there is very little laundry in the drum.

• Load more laundry.

The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after some minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin.

• Redistribute the laundry.

7.5 disappears.

No water is visible in the drum:

Machines based on modern technology operate very
economically using very little water without affecting
performance.

If you are unable to identify or solve the problem,

Mod. ..........

Prod. No. ...........

Ser. No. .........

M

o
d
. ..

..

......

P
r
o
d
. N

o
.
..
.
..
...

...

S
e
r

. N
o
.
.
.

..

.....

P0042 BD

contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.

Technical Data

Technical data

35

Width

Dimensions

Height
Depth
(door included)

Power supply

Electrical connection

Voltage/frequency
Total power absorbed

220-230 V/50 Hz

Minimum fuse protection

Water supply pressure

Minimum
Maximum

Maximum Load Cotton 7 kg

Spin Speed Maximum

1000 rpm (L 705500)

1200 rpm (L 725500)

60 cm
85 cm
63 cm

2200 W

10 A

0,05 MPa
0,80 MPa

Consumption value

36

Consumption value

Programme

White Cottons 95° 65 2,1
Cottons 60° 60 1,4
(*)Cotton ECONOMY 60° 49 1,19
Cottons 40° 60 0,77
Synthetics 60° 65 0,45
Delicates 40° 63 0,6
Wool/ Handwash 30° 55 0,25

Water consumption

(lltres)

Energy consumption

(KWh)

Programme duration

The consumption data shown on this chart is to be considered purely indicative, as
it may vary depending on the quantity and type of laundry, on the inlet water
temperature and on the ambient temperature.

(*) «Cottons Economy» at 60°C with a load of 7 kg is the reference programme for
the data entered in the energy label, in compliance with EEC 92/75 standards.

(Minutes)

control panel.

to the display on the

For the duration of the

programmes, please refer

Installation

HEC0008

HEC0030

Unpacking

All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the

machine ever has to be transported again.

1. After removing all the packaging, carefully lay

machine on it’s back to remove the
polystyrene base from the bottom.

2. Remove the power supply cable and the

draining hose from the hose holders on the rear of the
appliance.

Installation

37

3. Unscrew the three bolts with the supplied

spanner.

Installation

HEC0010

HEC0005

38

4. Slide out the relevant plastic spacers.

5. Open the porthole, take out the inlet hose from the

drum and remove the polystyrene block fitted on the
door seal.

6. Fill the smaller upper hole and the two large ones with

the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.

7. Connect the water inlet hose as described under the

paragraph «Water inlet».

All the different plug caps are supplied with the appliance in
the plastic bag containing the instruction booklet.

Positioning and levelling

HEC007S

HEC0006

Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by carpets,

rugs etc.
Before placing it on small tiles, apply a rubber coating.
Never try to correct any unevenness in the floor by putting pieces of wood,

cardboard or similar materials under the machine.
If it is impossible to avoid positioning the machine

next to a gas cooker or coal-burning stove, an
insulating panel covered with aluminium foil on the
side facing the cooker or stove, must be inserted
between the two appliances.

The machine must not be installed in rooms where
the temperature can drop below 0.

The water inlet hose and the drain hose must not be kinked.
Please ensure that when the appliance is installed, it is easily accessible for the

engineer in the event of a breakdown.
Carefully level by screwing the adjustable feet in or out.

Installation

39

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

Do not use the hose from your old machine to connect to the water
supply.

This appliance must be connected to a cold
water supply.

1. Open the porthole and extract the inlet hose.

2. Connect the hose with the angled connection to

the machine.

Do not place the inlet hose downwards. Angle
the hose to the left or right depending on the
position of your water tap.

Installation

A

352

40

3. Set the hose correctly by loosening the ring nut. After positioning the inlet

hose, be sure to tighten the ring nut again to prevent leaks.

4. Connect the hose to a tap with a 3/4” thread.

Always use the hose supplied with the appliance.

Installation should comply with local water authority
and building regulations requirements. Check the
minimum water pressure required for safe operation of
the appliance in the chapter “Technical Data”.

If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system. There should be a minimum verti­cal distance of 16.5 feet between the appliance’s inlet and the bottom of the water
storage tank.

Water-stop device

The inlet hose is provided with a water stop device,
which protects against damage caused by water leaks
in the hose which could develop due to natural ageing
of the hose. This fault is shown by a red sector in the
window “A”. Should this occur, turn the water tap off
and refer to your Service Centre to replace the hose.

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose guide supplied
with the machine.

In this case, make sure the end cannot come
unhooked when the machine is emptying.

This could be done by tying it to the tap with a piece
of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm above
the ground.

Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.

The end of the drain hose must always be ventilated, i.e. the inside diameter of
the drain pipe must be larger than the outside diameter of the drain hose.

The drain hose must not be kinked.

Installation

P1118

Important!

The drain hose may be extended to a maximum of 4 metres. An additional drain
hose and joining piece is available from your local Service Centre.

Electrical connection

Information on the electrical connection is given on the rating plate on the inner
edge of the appliance door and in the chapter «Technical Data».

Check that your domestic electrical installation can take the maximum load
required, also taking into account any other appliances in use.

Connect the machine to an earthed socket.

41

The manufacturer does not accept any responsibility for damage or
injury through failure to comply with the above safety precaution.

The power supply cable must be easily accessible after installing the
machine.

Should the appliance power supply cable need to be replaced, this must
be carried out by a Service Centre.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole
switch between the appliance and the electricity supply (mains), with a minimum
gap of 3 mm between the switch contacts and of a type suitable for the required
load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.
This operation must be performed by a qualified electrician.

Environmental concerns

42

Environmental concerns

Packaging materials

The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in

appropriate collection containers.

Old machine

Use authorised disposal sites for your old appliance. Help to keep your country tidy!

The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead it should be taken to the appropriate
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local council, your
household waste disposal service or the shop where you purchased the product.

Ecological hints

To save water, energy and to help protect the environment, we recommend that
you follow these tips:

• Normally soiled laundry may be washed without prewashing in order to save

detergent, water and time (the environment is protected too!).

•

The machine works more economically if it is fully loaded.

•

With adequate pre-treatment, stains and limited soiling can be removed; the

laundry can then be washed at a lower temperature.

• Measure out detergent according to the water hardness, the degree of soiling

and the quantity of laundry being washed.

Notes

43

www.electrolux.com

www.aeg-electrolux.es

132 961 431-00-432008 Subject to change without notice