AEG L6TDR642G User guide

L6TDR642G

USER
MANUAL

EN User Manual

Washing Machine

www.aeg.com2

CONTENTS

1. SAFETY INFORMATION......................................................................................3

2. SAFETY INSTRUCTIONS.................................................................................... 5

3. PRODUCT DESCRIPTION...................................................................................6

4. TECHNICAL DATA............................................................................................... 8

5. INSTALLATION.....................................................................................................8

6. CONTROL PANEL..............................................................................................11

7. PROGRAMME CHART.......................................................................................13

8. OPTIONS............................................................................................................17

9. SETTINGS.......................................................................................................... 19

10. BEFORE FIRST USE........................................................................................20

11. DAILY USE....................................................................................................... 20

12. HINTS AND TIPS..............................................................................................25

13. CARE AND CLEANING.................................................................................... 26

14. TROUBLESHOOTING......................................................................................29

15. CONSUMPTION VALUES................................................................................32

16. QUICK GUIDE.................................................................................................. 34

17. ENVIRONMENTAL CONCERNS......................................................................35

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.

Warning / Caution-Safety information
General information and tips
Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before beginning the installation and use of this
appliance, carefully read the supplied instructions.
The manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.

• Children of less than 3 years of age should be kept

away from the appliance unless continuously
supervised.

• Children should be supervised to ensure that they do

not play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

ENGLISH 3

www.aeg.com4

1.2 General Safety

• This appliance is for washing domestic-type, machine-

washable laundry only.

• This appliance is designed for single household

domestic use in an indoor environment.

• This appliance may be used in, offices, hotel guest

rooms, bed & breakfast guest rooms, farm guest
houses and other similar accommodation where such
use does not exceed (average) domestic usage levels.

• Do not change the specification of this appliance.

• The appliance maximum load is 6 kg. Do not exceed

the maximum load of each programme (refer to the
“Programmes” chapter).

• The operating water pressure at the water entry point

from the outlet connection must be between 0.5 bar
(0.05 MPa) and 10 bar (1.0 MPa).

• The ventilation opening in the base must not be

covered by a carpet, mat, or any floor covering.

• The appliance must be connected to the water mains

using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.

• Old hose sets must not be reused.

• If the mains power supply cable is damaged, it must

be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the
socket.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• Clean the appliance with a moist cloth. Use only

neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.

2. SAFETY INSTRUCTIONS

ENGLISH 5

2.1 Installation

The installation must comply
with relevant national
regulations.

• Remove all the packaging and the

transit bolts including rubber bush
with plastic spacer.

• Keep the transit bolts in a safe place.

If the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.

• Always take care when moving the

appliance as it is heavy. Always use
safety gloves and enclosed footwear.

• Follow the installation instructions

supplied with the appliance.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature can be less
than 0°C or where it is exposed to the
weather.

• The floor area on which the appliance

is to be installed must be flat, stable,
heat resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

• When the appliance is in its

permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.

• Do not install the appliance directly

above a floor drain.

• Do not spray water on the appliance

and do not expose it to excessive
humidity.

• Do not install the appliance where the

appliance lid cannot be fully opened.

• Do not put a closed container to

collect possible water leakage under
the appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.

2.2 Electrical connection

WARNING!

Risk of fire and electric
shock.

• WARNING: This appliance is
designed to be installed / connected
to a grounding connection in the
building.

• Always use a correctly installed
shockproof socket.

• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.

• Do not use multi-plug adapters and
extension cables.

• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need to
be replaced, this must be carried out
by our Authorised Service Centre.

• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.

• Do not touch the mains cable or the
mains plug with wet hands.

• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.

2.3 Water connection

• The inlet water shall not exceed
25 °C.

• Do not cause damage to the water
hoses.

• Before connection to new pipes, pipes
not used for a long time, where repair
work has been carried out or new
devices fitted (water meters, etc.), let
the water flow until it is clean and
clear.

• Ensure that there are no visible water
leaks during and after the first use of
the appliance.

• Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.

• When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.

• You can extend the drain hose to
maximum 400 cm. Contact the

www.aeg.com6

Authorised Service Centre for the
other drain hose and the extension.

• Make sure that there is access to the
tap after the installation.

2.4 Use

WARNING!

Risk of injury, electric shock,
fire, burns or damage to the
appliance.

• Follow the safety instructions on the
detergent packaging.

• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.

• Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.

• Make sure that all metal objects are
removed from the laundry.

2.5 Service

• To repair the appliance contact the
Authorised Service Centre. Use
original spare parts only.

• Please note that self-repair or non­professional repair can have safety
consequences and might void the
guarantee.

• The following spare parts will be
available for 10 years after the model
has been discontinued: motor and
motor brushes, transmission between
motor and drum, pumps, shock
absorbers and springs, washing drum,
drum spider and related ball bearings,
heaters and heating elements,
including heat pumps, piping and

related equipment including hoses,
valves, filters and aquastops, printed
circuit boards, electronic displays,
pressure switches, thermostats and
sensors, software and firmware
including reset software, door, door
hinge and seals, other seals, door
locking assembly, plastic peripherals
such as detergent dispensers. Please
note that some of these spare parts
are only available to professional
repairers, and that not all spare parts
are relevant for all models.

• Concerning the lamp(s) inside this
product and spare part lamps sold
separately: These lamps are intended
to withstand extreme physical
conditions in household appliances,
such as temperature, vibration,
humidity, or are intended to signal
information about the operational
status of the appliance. They are not
intended to be used in other
applications and are not suitable for
household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the
mains electrical and water supplies.

• Cut off the mains electrical cable
close to the appliance and dispose of
it.

• Remove the door catch to prevent
children or pets from becoming
trapped in the drum.

• Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).

3. PRODUCT DESCRIPTION

3.1 Special features

Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
proper care of fabric.

• The ProSense System adjusts
automatically the programme duration
to the laundry in the drum to achieve
perfect washing results in the
minimum possible time.

• Thanks to the Douceur Plus option,
the fabric softener is uniformly spread
out in the laundry and deeply

penetrates the fabric fibres favouring

8

9

12

6

7

10

11

2

3

1

5

4

6

a perfect softness.

3.2 Appliance overview

ENGLISH 7

Control panel

1

Lid

2

Lid handle

3

Drain pump filter

4

Lever to move the appliance

5

Feet for levelling the appliance

6

Inlet hose

7

Drain hose

8

Mains cable

9

Transit bolts

10

Hose support

11

Rating plate

12

00000000

00A

Mod.

xxxxxxxxx

000V ~ 00Hz 0000 W

910000000

00

A
B
C

Prod.No.

D

A
B

C

www.aeg.com8

Information for register product.

The rating plate reports the model name

(A) , product number (B), electrical
ratings (C) and serial number (D).

4. TECHNICAL DATA

Dimension Width/ Height/ Total depth 39,7 cm /90,3 cm /59,9 cm

Electrical connection Voltage

Level of protection against ingress of solid particles and
moisture ensured by the protective cover, except where
the low voltage equipment has no protection against mois‐
ture

Water supply pressure Minimum

Water supply

Maximum Load Cotton 6 kg

Spin Speed Maximum spin speed 1351 rpm

1)
Connect the water inlet hose to a water tap with a 3/4'' thread.

1)

Overall power
Fuse
Frequency

Maximum

The info label reports the model name (A),

product number (B ) and serial number (C).

230 V
2200 W
10 A
50 Hz

IPX4

0.5 bar (0.05 MPa)
10 bar (1.0 MPa)

Cold water

5. INSTALLATION

WARNING!

Refer to Safety chapters.

5.1 Unpacking and positioning

2

1

1

2

1

2

ENGLISH 9

1.

3. 4.

2.

We recommend that you keep the packaging and the transit bolts
for any transport of the appliance.

Adjust the appliance correctly to prevent vibration, noise and movement of the appliance
when it operates.

WARNING!
Do not put cardboard, wood or equivalent materials below the
appliance feet to adjust the level.

90O90

O

3/4”

3/4”

1/2”

3/4”

0.3-10 bar

FI

DK

SE
NO

min.600 mm
max.1000 mm

www.aeg.com10

5.2 The inlet hose

5.3 Water drainage

Accessories delivered with the appliance
may vary depending on the model.

Make sure there is no
damage to hoses and there
are no leaks from the
couplings. Do not use an
extension hose if the inlet
hose is too short. Contact
the service centre for a
replacement inlet hose.

The drain hose should stay at a height of no less than 600 mm and not more than 1000 mm.
You can extend the drain hose to maximum 4000 mm. Contact the authorised service
centre for the other drain hose and the extension.

5.4 Water-stop device

The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing.

The red sector in the window «A» shows
this fault.

A

If this occurs, close the water tap and

9

81012 11

1

2 3 4

5

7

6

contact the authorized service centre to
replace the hose.

ENGLISH 11

required, also taking into account any
other appliances in use.

Connect the appliance to an earthed
socket.

5.5 Electrical connection

At the end of installation you can connect
the mains plug to the mains socket.

The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are
compatible with the mains power supply.

Check that your domestic electrical
installation can take the maximum load

6. CONTROL PANEL

6.1 Control panel description

The power supply cable must be easily
accessible after installing the appliance.

For any electrical work required to install
this appliance, contact our Authorised
Service Centre.

The manufacturer does not accept any
responsibility for damage or injury
through failure to comply with the above
safety precaution.

1

Marche/Arrêt push button
Programme dial

2

Display

3
4

Départ Différé touch button

5

Gain de Temps touch button

6

Rinçage skipping touch button

• Rinçage Plus option

• Rinçage option

7

Départ/Pause touch button
Taches/Prélavage skipping touch

8

button

MIX

www.aeg.com12

• Taches option

• Prélavage option

9

Anti-Allergie touch button

10

Lessive Liquide touch button

6.2 Display

The indicator flashes during the laundry load estimation.

Maximum laundry indicator. It flashes when the laundry load exceeds
the maximum declared load of the selected programme.

Lid locked indicator.

Delay start indicator.

11

T/min. reduction touch button

12

Temp. touch button

The digital indicator can show:

• Programme duration (e. g.

• Delay time (e. g.

• Cycle end (

• Alarm code (

• Indication of total operating hours of the appliance. Refer to the "Op‐
erating hours counter" section in the "Settings" paragraph for more
details.

Washing phase indicator. It flashes during prewash and wash phase.

Rinsing phase indicator. It flashes during rinse phase.

Soft Plus option. The indicator appears above the when option
is set .

Spinning and draining phase indicator. It flashes during spin and drain
phase.

Child safety lock indicator.

or ).

).

).

).

Temperature indicator. The indicator appears when a cold wash is
set.

Spin speed indicator.

No spin speed indicator. Spin phase is off, the appliance performs only
the draining phase.

Rinse hold indicator.

Extra silent indicator.

Time saving indicator.

7. PROGRAMME CHART

Washing programmes

Programme Default

tempera‐
ture
Tempera‐
ture range

Eco 40-60

Coton

Synthétiques

Délicats

Laine/Soie

20 min. - 3 kg

40 °C

40 °C
95 °C ­Cold

40 °C
60 °C ­Cold

30 °C
40 °C ­Cold

40 °C
40 °C ­Cold

30 °C
40 °C ­30 °C

1)

Reference
spin speed
Spin speed
range

1400 rpm
1400-400
rpm

1400 rpm
1400 - 400
rpm

1200 rpm
1200- 400
rpm

1200 rpm
1200 - 400
rpm

1200 rpm
1200- 400
rpm

1200 rpm
1200 ­400rpm

Maxi‐
mum
load

6 kg

6 kg

3 kg

2 kg

1,5 kg

3 kg

ENGLISH 13

Programme description

White cotton and fast-coloured
cotton. Normally soiled items. The

energy consumption decreases and
the time of the washing programme
is extended, ensuring good washing
results.

White and coloured cotton heavily
and normally soiled cotton items.

Synthetic items or mixed fabric
items. Normally soiled items.

Delicate fabrics such as acrylics,
viscose and mixed fabrics requir‐
ing gentler washing. Normally and

lightly soiled items.

Machine washable wool, hand
washable wool and other fabrics

with «hand washing» care symbol2).

Cotton and synthetic items lightly
soiled or once worn.

www.aeg.com14

Programme Default

tempera‐
ture
Tempera‐
ture range

30 °C

Outdoor

40 °C ­Cold

40 °C

Duvet

60 °C ­Cold

40 °C
Repassage
Facile

60 °C -

Cold

Reference
spin speed
Spin speed
range

1200 rpm
1200 -400
rpm

800 rpm
800 - 400
rpm

800 rpm
800 rpm ­400 rpm

Maxi‐
mum
load

2 kg

1 kg

2 kg

3 kg

Programme description

Do not us fabric soft‐
ener and make sure
there is no softener
residue in the deter‐
gent dispenser.

Outdoor clothing, technical, sport
fabrics, waterproof and breatha‐
ble jackets, shell jackets with a re‐
movable fleece or inner insula‐
tion.The recommended laundry load

is 2 kg. This programme can also be
used as water-repellent restoring cy‐
cle, specifically tailored for treating
clothes with a hydrophobic coating.

3)

To perform the water-repellent re‐

4)

storing cycle, proceed as follows:

• Pour the washing detergent in

the compartment

• Pour a special water-repellent re‐
storer for fabric in the drawer
compartment for fabric softener

.

• Reduce the laundry load to 1 kg.

To further improve the water repel‐
lency restoring action, dry the laun‐
dry in a tumble dryer by setting the
Outdoor drying programme (if avail‐
able and if the garment care label
permits tumble drying).

Single synthetic blanket, padded
clothes, duvets, down jackets and

similar items.

Synthetic items requiring a gentle
wash. Normally and lightly soiled

5)

items.

.

ENGLISH 15

Programme Default

tempera‐
ture
Tempera‐

Reference
spin speed
Spin speed
range

Maxi‐
mum
load

Programme description

ture range

All fabrics, except woollens and
delicate fabrics. To spin the laun‐

6 kg

dry and to drain the water in the
drum.

Vidange/
Essorage

1)
According to Commission Regulation EU 2019/2023, this programme at 40 °C is able to clean normal‐

ly soiled cotton laundry declared to be washable at 40 °C or 60 °C, together in the same cycle.

For the reached temperature in the laundry, the programme duration and other data,
please refer to 'Consumption Values' chapter.
The most efficient programmes in terms of energy consumption are generally those that
perform at lower temperatures and longer duration.

2)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't

rotate or doesn't rotate properly, but this is normal for this programme.

3)
Washing programme.

4)
Washing programme and waterproofing phase.

5)
To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin

phase. The appliance adds some rinses.

-

1400 rpm
1400 rpm ­400 rpm

Programme options compatibility

OPTIONS

T/min.

Rinse Hold

Extra Silent

Taches

1)

Prélavage

Rinçage Plus

Duvet

Outdoor

PROGRAMME

Coton

Eco 40-60

Délicats

Synthétiques

20 min. - 3 kg

Laine/Soie

■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■

■ ■ ■ ■ ■ ■

Repassage Facile

Vidange/Essorage

www.aeg.com16

Duvet

Outdoor

PROGRAMME

Coton

Eco 40-60

Délicats

Synthétiques

20 min. - 3 kg

Laine/Soie

OPTIONS

Rinçage

Anti-Allergie

Gain de Temps 2)

Départ Différé

Lessive Liquide

Douceur Plus

1)
This option is not available with temperature lower than 40 °C.

2)
If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully

load the appliance, however the washing results can be less satisfactory.

■ ■ ■ ■ ■ ■ ■ ■ ■

■

■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■ ■ ■ ■

■ ■ ■ ■ ■ ■

Suitable detergents for washing programmes

Programme

Universal

powder

1)

Liquid Uni‐

versal

Liquid for

coloureds

Delicates
woollens

Special

Eco 40-60 ▲ ▲ ▲ -- --

Coton

Synthétiques

▲ ▲ ▲ -- --

▲ ▲ ▲ -- --

Repassage Facile

Vidange/Essorage

Délicats

Laine/Soie

20 min. - 3 kg

Outdoor

Duvet

Repassage Facile

1)
At temperature higher than 60 °C the use of powder detergent is recommended.

-- -- -- ▲ ▲

-- -- -- ▲ ▲

-- ▲ ▲ -- --

-- -- -- ▲ ▲

-- -- -- ▲ ▲

▲ ▲ ▲ -- --

▲ = Recommended -- = Not recommended

7.1 Woolmark Wool Care - Blue

8. OPTIONS

ENGLISH 17

The wool wash cycle of this machine has
been approved by The Woolmark Company
for the washing of wool garments labelled as
«hand wash» provided that the products are
washed according to the instructions on the
garment label and those issued by the manu‐
facturer of this washing machine. M1145
The Woolmark symbol is a Certification mark
in many countries.

8.1 Introduction

The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.

8.2 Marche/Arrêt

Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.

As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.

For more details, refer to Stand-by
paragraph in Daily Use chapter.

8.3 Temp.

When you select a washing programme,
the appliance automatically proposes a
default temperature.

Set this option to change the default
temperature.

The indicator
temperature comes on (the appliance
does not heat the water).

= cold water of the set

8.4 T/min.

When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only
the spin speeds available
for the set programme.

• Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum.

The display shows the indicator
The lid stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the lid.

If you touch the Départ/Pause
button, the appliance performs the
spinning phase and drains the water.

The appliance empties
the water out
automatically after 18
hours approximately.

• Activate the Extra Silent option.

.

www.aeg.com18

The intermediate and the final
spinning phases are suppressed and
the programme ends with water in the
drum. This helps to reduce creasing.

The display shows the indicator
The lid stays locked. The drum turns
regularly to reduce creasing. You
must drain the water to unlock the lid.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are
available. In some programmes the
rinses are performed with more water.

If you touch the Départ/Pause
button, the appliance performs the
only draining phase.

The appliance empties
the water out
automatically after 18
hours approximately.

8.5 Taches/Prélavage

Press this button repeatedly to activate
one of the two options.

• Taches
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into

compartment
will be added in the appropriate phase
of the washing programme.

This option can increase
the programme duration
and is not available with a
temperature lower than
40 °C.

• Prélavage
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.

This option can increase
the programme duration.

The corresponding indicator above
the touch button illuminates.

. The stain remover

8.6 Rinçage

With this button you can select one of the
following options:

.

• Option Rinçage Plus
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.

This option increases
slightly the programme
duration.

• Skipping wash phase - Rinçage
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.

The related indicator comes on.

8.7 Gain de Temps

With this option you can decrease the
programme duration.

• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.

• In case of smaller load, touch this
button twice to set an extra quick
programme.

The display shows the indicator

8.8 Anti-Allergie

Set this option with white Coton items
programme. When the option is selected,
neither the temperature or the cycle time
can be changed. Option Gain de Temps

and Extra silent are not available.

The corresponding indicator above the
touch button illuminates.

This option removes micro-organisms
thanks to a washing phase with the
temperature maintained above 60°C for
several minutes. This helps in removing
germs, bacteria, micro-organism and
particles. The addition of vapour together
with an additional rinsing phase ensures
a proper removal of detergent residues
and pollens/allergenic items, making it
suitable for delicate and sensitive skins.

.

ENGLISH 19

8.9 Lessive Liquide

Press this button to adapt the cycle if you
use a liquid detergent.

The related indicator comes on.

CAUTION!

Make sure that the liquid/
powder switch on the
detergent compartment to
the correct position. Refer to
'Liquid or powder detergent'
chapter.

8.10 Départ Différé

With this option you can delay the start of
a programme in a more convenient time.

9. SETTINGS

9.1 Acoustic signals

To deactivate the acoustic signals when
the programme is completed touch the
Anti-Allergie and the Taches/Prélavage
buttons simultaneously for about 3
seconds.

The acoustic signals, they
continue operate when the
appliance has a malfunction.

9.2 Child Lock

With this option you can prevent that the
children play with the control panel.

• To activate/deactivate this option,
touch the T/min. and the Taches/
Prélavage buttons simultaneously

until the indicator
off on the display.

You can activate this option:

• After you touch the Départ/Pause
button: all the buttons and the
programme dial are deactivated
(except Marche/Arrêt button ).

• Before you touch the Départ/Pause
button: the appliance cannot start.

The appliance keeps the selection of this
option after you switch it off.

comes on/goes

Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.

After touching the Départ/Pause
button, the display shows the indicator

and the selected delay time and the

appliance begins the countdown.

8.11 Départ/Pause

Touch the Départ/Pause button to start,
pause the appliance or interrupt a
running programme.

9.3 Douceur Plus

Set the Douceur Plus option to optimise
the fabric softener distribution and
improve the fabric softness.

It is suggested when you use the fabric
softener.

This option increases slightly
the programme duration.

To activate/deactivate this option touch
the Temp. button and the T/min. button

simultaneously until the

comes on/goes off above the
indicator.

indicator

9.4 Permanent Extra Rinse

With this option you can permanently
have an extra rinse when you set a new
programme.

• To activate/deactivate this option
touch the Taches/Prélavage button
and the Rinçage . The corresponding
indicator next the touch button
illuminates.

9.5 Operating Hours Counter

It is possible to visualise the total
operating time of the appliance in hours,
starting from the first switching on. This
value will count operating time of the

www.aeg.com20

cycles (does not include pauses, delayed
start time). To visualise this value,
proceed as follows:

1. Switch the appliance on by pressing
Marche/Arrêt button.

2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).

3. Press and hold the Anti-Allergie and
Taches/Prélavage buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).

4. After 3 seconds the total hours
operated by the appliance are shown
in the display: e.g. 1276 hours, the
display shows the text Hr for 2
seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens
and units).

If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.

10. BEFORE FIRST USE

9.6 Factory Reset

This function allows to restore the factory
default options. To activate this option
follow steps below:

1. Switch the appliance on by pressing
Marche/Arrêt button.

2. Turn the programme knob to the
Synthétiques programme (3rd
position clockwise).

3. Press and hold the Anti-Allergie and
Taches/Prélavage buttons for some
seconds (within 10 seconds after the
switching on. After these 10 seconds,
the key combination activates and
deactivates the acoustic signals).

4. The display will show
about 5 seconds.

If the procedure does not
work (due to timeout, wrong
programme dial position or
wrong keys combination),
switch the appliance off and
repeat sequence from the
beginning.

for

During installation or before
first use you may observe
some water in the appliance.
This is residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.

1. Connect the mains plug to the mains
socket.

11. DAILY USE

11.1 Activating the appliance

1. Connect the mains plug to the mains
socket.

2. Open the water tap.

3. Press button Marche/Arrêt to activate
the appliance.

2. Open the water tap.

3. Put 2 litre of water in the detergent
compartment for washing phase.

This activates the drain system.

4. Put a small quantity of detergent in
the compartment for washing phase.

5. Set and start a programme for cotton
at the highest temperature without
laundry.

This removes all possible dirt from the
drum and the tub.

A short tune sounds.

11.2 Loading the laundry

1. Open the appliance lid.

A

M

ENGLISH 21

2. Push the button A.

The drum opens automatically.

3. Put the laundry in the drum, one item
at a time.

4. Shake the items before you put them
in the appliance.

Make sure not to put too much laundry in
the drum.

5. Close the drum and the lid.

CAUTION!

Before you close the lid of
your appliance, make sure
that you close the drum
correctly.

11.3 Detergent compartments. Using detergent and additives

1. Measure out specified detergents for
washing machine the detergent and the
fabric conditioner.

2. Put the detergent and the fabric
conditioner into the proper
compartments.

Always obey the instructions
that you find on the
packaging of the detergent
products.

Detergent compartment for pre‐
wash phase.
The marks MAX are the maxi‐
mum levels of the quantity of
detergent (powder or liquid).
When you set a programme
with a stain, add detergent
(powder or liquid).

Detergent compartment for
washing phase.
The marks MAX are the maxi‐
mum levels of the quantity of
detergent (powder or liquid).

Compartment for liquid additives
(fabric conditioner, starch).

The mark
level for the quantity liquid addi‐
tives.

Flap for powder or liquid deter‐
gent.

is the maximum

1 2

3 4

CLICK

A

CLICK

B

www.aeg.com22

11.4 Liquid or powder detergent

• Position A for powder detergent
(factory setting).

• Position B for liquid detergent.

When you use the liquid
detergent:

• Do not use gelatinous or
thick liquid detergents.

• Do not put more liquid
then the maximum level.

• Do not set the delay start
function.

11.5 Setting a programme

1. Turn the programme knob and set
the programme:

• The related programme indicator

comes on.

• The indicator of Départ/Pause

flashes.

• The display shows: the default

temperature, the spin speed, the
indicators of the programme
phases and the programme
duration.

2. If necessary, change the
temperature, the spin speed, the
cycle duration, or add available
options. When you activate an
option, the indicator of the set option
comes on.

In case a selection is not
possible , no indicator
comes on and an acoustic
signal sounds.

11.6 Starting a programme without the delay start

Press button Départ/Pause to start the
programme.

The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase
is operation starts to flash.
The programme starts, the lid is locked.

The display show the indicator

The drain pump can operate
for a short time when the
appliance fills water.

.

ENGLISH 23

11.7 Cycle time recalculation

After approximately 15
minutes from the start of the
programme:

• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.

• The display shows the
new time value.

11.8 Starting a programme with the delay start

1. Press button Départ Différé again
and again until the display shows the
number of minutes or hours of delay.

The related indicator comes on.

2. Press button Départ/Pause.

The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.

Before you press button
Départ/Pause to start the
appliance, you can cancel or
change the set of the delay
start.

11.9 Cancelling the delay

start

To cancel the delay start:

1. Press button Départ/Pause to set the
appliance to pause.

The related indicator flashes.

2. Press button Départ Différé

repeatedly until the display shows

3. Press button Départ/Pause again to
start the programme immediately.

11.10 Interrupting a

programme and changing a
option

You can change only some options
before they operate.

1. Press button Départ/Pause.

The related indicator flashes.

2. Change the option set.

3. Press the button Départ/Pause
again.

The programme continues.

11.11 Cancelling a running

programme

1. Press button Marche/Arrêt to cancel
the programme and to deactivate the
appliance.

2. Press button Marche/Arrêt again to
activate the appliance.

Now, you can set a new washing
programme.

Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.

11.12 The ProSense System

load detection

After touching the Départ/Pause
button:

1. The ProSense System starts the
laundry load detection to calculate
the real programme duration. The

indicator

2. After about 15 minutes the display
shows the new programme duration:

the indicator
dots

The appliance adjusts automatically
the programme duration to the load
to achieve perfect washing results in
the minimum possible time. The
programme duration could increase
or decrease.

.

and the time dots flash.

goes off and the time

stops flashing.

The ProSense System
detection is carried out with
complete washing
programmes only (no
skipping phase selected).

www.aeg.com24

The ProSense System is not
available with all
programmes such as :Laine/
Soie, Rinçage,
EssorageVidange, and
programmes with short
cycles.

11.13 Opening the Lid when the programme operates

CAUTION!

If the temperature and level
of the water in the drum are
too high, the lid lock

indicator
you cannot open the lid.

To open the lid proceed as follows:

1. Press the button Marche/Arrêt for
some seconds to deactivate the
appliance.

2. Wait for some minutes and then open
carefully the lid.

3. Close the lid.

4. Activate the appliance and set the
programme again.

stays on and

11.14 Opening the Lid when

the delay start is active

While the delay start operates, the
appliance lid is locked.

To open the appliance lid:

1. Press button Départ/Pause .

The lid lock indicator goes off.

2. Open the appliance lid.

3. Close the lid and press button
Départ/Pause .

The delay start continues.

11.15 End of cycle

When the programme has finished, the
appliance stops automatically. The
acoustic signal operates (if it is active).

The indicator of Départ/Pause button
goes off.

1. Press button Marche/Arrêt to
deactivate the appliance.

After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.

When you activate the
appliance again, the display
show the end of the last set
programme. Turn the
programme knob to set a
new cycle.

2. Remove the laundry from the
appliance.

3. Make sure that the drum is empty.

4. Keep the door ajar, to prevent mildew
and odours

11.16 Draining water out after

end of cycle

The washing programme is
completed, but there is water in the
drum:

The drum turns regularly to prevent the
creases in the laundry.

The lid lock indicator
stays locked.

You must drain the water to open the lid:

1. If necessary, decrease the spin
speed.

2. Press the Départ/Pause button.

The appliance drains the water and
spins.

3. When the programme is completed

and the door lock indicator
off, you can open the door .

4. Press Marche/Arrêt some seconds to
deactivate the appliance.

The appliance drains and
spins automatically after
approximately18 hours.

is on. The lid

goes

In the display

locked indicator

comes on and the lid

goes off.

12. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

12.1 The laundry load

• Divide the laundry into: white,
coloured, synthetics, delicates and
wool.

• Follow the washing instructions on the
laundry care labels.

• Do not wash white and coloured items
together.

• Some coloured items can discolour
with the first wash. We recommend
that you wash them separately for the
first couple of times.

• Turn multilayered fabrics, wool and
items with printed illustrations inside
out.

• Pre-treat stubborn stains.

• Wash stubborn stains with a special
detergent.

• Be careful with curtains. Remove the
hooks and put the curtains in a
washing bag or pillowcase.

• A very small load can cause balance
problems with the spin phase leading
to excessive vibration. If this occurs:

a. interrupt the programme and

open the door (refer to "Daily
Use" chapter);

b. manually redistribute the load so

that the items are spaced evenly
around the tub;

c. press the Départ/Pause button.

The spin phase continues.

• Button up pillowcases, close zippers,
hooks and poppers. Tie up belts,
cords, shoelaces, ribbons and any
other loose elements.

• Do not wash laundry without hems or
with cuts. Use a washing bag to wash
small and/or delicate items (e.g.
underwired bras, belts, tights,
shoelaces, ribbons, etc. ).

ENGLISH 25

• Empty pockets and unfold the items.

12.2 Stubborn stains

For some stains, water and detergent is
not sufficient.

We recommend that you pre-treat these
stains before you put the items in the
appliance.

Special stain removers are available.
Use the special stain remover that is
applicable to the type of stain and fabric.

12.3 Detergent type and quantity

The choice of detergent and use of
correct quantities not only affects your
wash performance, but also helps to
avoid waste and protect the environment:

• Use only detergents and other
treatments specially made for
washing machines. First, follow these
generic rules:

– powder detergents for all types of

fabric, excluding delicate. Prefer
powder detergents containing
bleach for whites and laundry
sanitization,

– liquid detergents, preferably for

low temperature wash
programmes (60 °C max) for all
types of fabric, or special ones for
woollens only.

www.aeg.com26

• The choice and quantity of detergent
will depend on: type of fabric
(delicates, woollens, cottons, etc), the
colour of clothes, size of the load,
degree of soiling, wash temperature
and hardness of the water used.

• Follow the instructions that you find
on packaging of the detergents or
other treatments without exceeding

the indicated maximum level (

• Do not mix different types of
detergents.

• Use less detergent if:

– you are washing a small load,
– the laundry is lightly soiled,
– there is large amounts of foam

during washing.

• When using detergent tabs or pods,
always put them inside the drum, not
in the detergent dispenser.

Insufficient detergent may cause:

• unsatisfactory washing results,

• the wash load to turn grey,

• greasy clothes,

• mould in the appliance.

Excessive detergent may cause:

• sudsing,

• reduced washing effect,

• inadequate rinsing,

• a greater impact for the environment.

12.4 Ecological hints

To save water, energy and to help
protect the environment, we recommend
that you follow these tips:

• Normally soiled laundry may be
washed without prewash in order to

save detergent, water and time (the
environment is protected too!).

• Loading the appliance to the

maximum capacity indicated for
each programmes helps to reduce
energy and water consumption.

• With adequate pre-treatment, stains
and limited soiling can be removed;
the laundry can then be washed at a

).

lower temperature.

• To use the correct quantity of
detergent, refer to the quantity
suggested by the detergent producer
and check the water hardness of you
domestic system. Refer to 'Water
hardness'.

• Set the maximum possible spin
speed for the selected washing
programme before drying your
laundry in a tumble dryer. This will
save energy during drying!

12.5 Water hardness

If the water hardness in your area is high
or moderate, we recommend that you
use a water softener for washing
machines. In areas where the water
hardness is soft it is not necessary to use
a water softener.

To find out the water hardness in your
area, contact your local water authority.

Use the correct quantity of water
softener. Follow the instructions that you
find on the packaging of the product.

13. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

13.1 Periodic cleaning schedule

Periodic cleaning helps to extend the
life of your appliance.

After each cycle, keep the door and the
detergent dispenser slightly ajar to get air
circulation and dry the humidity inside

the appliance: this will prevent mildew
and odours.

If the appliance is not used for a long
time: close the water tap and unplug the
appliance.

Indicative periodic cleaning schedule:

Descaling Twice a year

Maintenance wash Once a month

Clean lid seal Every two months

ENGLISH 27

Clean drum Every two months

Clean detergent dis‐
penser

Clean drain pump
filter

Clean the inlet hose
and the valve filter

The following paragraphs explain how
you should clean each part.

Every two months

Twice a year

Twice a year

13.2 Removing foreign objects

Make sure that pockets are
empty and all loose
elements are tied up before
running your cycle. Refer to
"The laundry load" in "Hints
and tips".

Remove any foreign objects (such as
metal clip, buttons, coins, etc) that you
may find in the filters and the drum. Refer
to "Cleaning the drum", "Cleaning the
drain pump" and "Cleaning the inlet hose
and the valve filter" paragraphs. If
necessary, please contact the Authorised
Service Centre.

13.3 External cleaning

Clean the appliance with mild soap and
warm water only. Fully dry all the
surfaces. Do not use a scouring pads or
any scratching material.

CAUTION!

Do not use alcohol, solvents
or chemical products.

CAUTION!

Do not clean the metal
surfaces with chlorine-based
detergent.

13.4 Descaling

If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.

Regularly examine the drum to check for
limescale.

Regular detergents already contain water
softening agents, but we recommend to
run a cycle with an empty drum and a
descaling product occasionally.

Always follow the
instructions that you find on
the packaging of the
product.

13.5 Maintenance wash

With the low temperature programmes it
is possible that some detergent stays in
the drum. Perform a maintenance wash
regularly. To do this:

• Remove all laundry from the drum.

• Select the cotton programme with the
highest temperature with a small
quantity of detergent.

13.6 Lid seal

Regularly examine the seal and remove
all objects from the inner part. Clean it
when needed, using ammonia cream
cleanser agent without scratching the
seal surface.

Always obey the instructions
that you find on the
packaging of the product.

13.7 Cleaning the drum

Regularly examine the drum to prevent
rust particles.

For a complete cleaning:

1. Clean the drum with special products

for stainless steel.

Always follow the
instructions that you find on
the packaging of the
product.

1 2 3

1 2 3

4 5

www.aeg.com28

2. Run a short cotton programme at
high temperature or use if is available
programme Nettoyage Tambour. Add

a small quantity of powder detergent
into empty drum, in order to rinse out
any left residues.

13.8 Cleaning the detergent dispenser

13.9 Cleaning the drain filter

Regularly check the drain pump filter and
make sure that it is clean.

Clean the drain pump if:

• The appliance does not drain the

water.

• The drum does not turn.

• The appliance makes an unusual

noise because of the blockage of the
drain pump.

• The display shows the alarm code

Always keep a rag nearby to dry up any
water spillages when removing the filter.

WARNING!

• Disconnect the mains
plug from the mains
socket.

• Do not remove the filter
while the appliance
operates.

• Do not clean the pump if
the water in the appliance
is hot. Wait until the water
cools down .

Proceed as follows to clean the pump:

13.10 Cleaning the inlet hose and the valve filter

1

2

3

21

3

4

1

90O90

O

ENGLISH 29

13.11 Emergency drain

If the appliance cannot drain the water,
carry out the same procedure, described
in 'Cleaning the drain pump' paragraph. If
necessary, clean the pump.

When you drain the water with the
emergency drain procedure, you must
activate the drain system again:

1. Put 2 litres of water in the main wash
compartment of the detergent
dispenser.

2. Start the programme to drain the
water.

13.12 Frost precautions

If the appliance is installed in an area
where the temperature can reach values
around 0° C or drop below, remove the
remaining water from the inlet hose and
the drain pump.

14. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

1. Disconnect the mains plug from the
mains socket.

2. Close the water tap.

3. Put the two ends of the inlet hose in
a container and let the water flow out
of the hose.

4. Empty the drain pump. Refer to the
emergency drain procedure.

5. When the drain pump is empty,
install the inlet hose again.

WARNING!

Make sure that the
temperature is higher than
0 °C before you use the
appliance again.
The manufacturer is not
responsible for damages
caused by low temperatures.

www.aeg.com30

14.1 Alarm Codes and Possible failures

The appliance does not start or it stops during operation. First try to find a solution to the
problem (refer to the tables).

WARNING!

Deactivate the appliance before carrying out any check.

With some problems, the display shows an alarm code and the

Départ/Pause button may flash continuously:

Problem Possible solution

• Make sure that the water tap is open.

The appliance does
not fill with water prop‐
erly.

The appliance does
not drain the water.

No communication be‐
tween electronic ele‐
ments of the appli‐
ance.

The mains supply is
unstable.

The anti-flood device
is on.

• Make sure that the pressure of the water supply is not too low.
For this information, contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the inlet hose has no kinks, damages or
bends.

• Make sure that the connection of the water inlet hose is cor‐
rect.

• Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to 'Care and cleaning'.

• Make sure that the sink spigot is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Make sure that the drain filter is not clogged. Clean the filter, if
necessary. Refer to "Care and cleaning".

• Make sure that the connection of the drain hose is correct.

• Set the drain programme if you set a programme without drain
phase.

• Set the drain programme if you set an option which ends with
water in the tub.

• The programme was not finished properly or the appliance
stopped too early. Switch the appliance off and on again.

• If the alarm code appears again, contact the Authorised Serv‐
ice Centre.

• Wait until mains supply is stable.

• Disconnect the appliance and close the water tap. Contact the
Authorised Service Centre.

If the display shows other alarm codes, deactivate and activate the
appliance. If the problem continues, contact the Authorised Service
Centre.
In case of different problem with the washing machine check the
table below for possible solutions.

Problem Possible solution

• Make sure that the mains plug is connected to the mains
socket.

• Make sure that the appliance lid and drum door are closed.

The programme does

not start.

• Make sure that there is no damaged fuse in the fuse box.

• Make sure that the Départ/Pause has been touched.

• If the delay start is set, cancel the setting or wait for the end of
countdown.

• Deactivate the Child Lock function if it is on.

• Check the position of the knob on the selected programme.

The appliance fills with
water and drains im‐
mediately.

The spin phase does
not operate or the
washing cycle lasts
longer than usual.

• Make sure that the drain hose is in the correct position. The
hose may be positioned too low. Refer to "Installation instruc‐
tion".

• Set the spin programme.

• Make sure that the drain filter is not clogged. Clean the filter, if
necessary. Refer to "Care and cleaning".

• Adjust manually the items in the tub and start the spin phase
again. This problem may be caused by balance problems.

• Make sure that the couplings of the water hoses are tight and
there is not water leakages.

There is water on the
floor.

• Make sure that the water inlet hose and the drain hose have
no damages.

• Make sure you use the correct detergent and the correct
quantity of it.

• Make sure that a washing programme that ends with water in
tub, has not been selected.

• Make sure that the washing programme is finished.

You cannot open the
appliance lid.

• Set the drain or the spin programme if there is water in the
drum.

• Make sure that the appliance receives electrical power.

• This problem may be caused by a failure of the appliance.
Contact the Authorised Service Centre.

• Make sure the levelling of the appliance is correct. Refer to

The appliance makes
an unusual noise and
vibrates.

"Installation instruction".

• Make sure that the packaging and/or the transit bolts are re‐
moved. Refer to "Installation instruction".

• Add more laundry in the drum. The load may be too small.

The programme dura‐
tion increases or de‐
creases during pro‐

• The ProSense System is able to adjust the programme dura‐
tion according to the type and the laundry load size. Refer to
"The ProSense System load detection" in "Daily Use" chapter.

gramme execution.

• Increase the detergent quantity or use a different detergent.

The washing results
are not satisfactory.

• Use special products to remove the stubborn stains before
you wash the laundry.

• Make sure that you set the correct temperature.

• Decrease the laundry load.

ENGLISH 31

www.aeg.com32

Problem Possible solution

Too much foam in the
drum during the wash‐
ing cycle.

After the washing cy‐
cle, there are some
detergent residues in
the dispenser drawer.

After the check, activate the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.

• Reduce the quantity of detergent.

• Make sure that the flap is in the correct position.

• Make sure you have used the detergent dispenser according
the indications given in this user manual.

15. CONSUMPTION VALUES

15.1 Introduction

See the web link www.theenergylabel.eu for
detailed information about Energy Label.

The QR code on the energy label supplied with the
appliance provides a web link to the information
related to the performance of the appliance in the
EU EPREL database. Keep the energy label for
reference together with the user manual and all
other documents provided with this appliance.
It is also possible to find the same information in
EPREL using the link https://eprel.ec.europa.eu
and the model name and product number that you
find on the rating plate of the appliance. Refer to
'Product description' chapter for the position of the
rating plate.

15.2 Legend

kg Laundry load. hh:mm Programme duration.

kWh Energy consumption. °C Temperature in the laundry.

Litres Water consumption. rpm Spin speed.

% Remaining moisture at the end of spinning phase. The higher is the spin speed,

the higher is the noise and the lower is the remaining moisture.

Values and programme duration may differ depending on different
conditions (e.g. room temperature, water temperature and pressure, load
size and type of laundry, supply voltage) and also if you change the
default setting of a programme.

15.3 According to Commission Regulation Eu 2019/2023

ENGLISH 33

Eco 40-60 pro‐
gramme

Full load 6 0.940 47 3:17 53 47 1351

Half load 3 0.518 37 2:35 53 39 1351

Quarter load 1,5 0.260 29 2:35 54 25 1351

1)
Maximum spin speed.

kg kWh Litres hh:mm % °C

rpm

Power consumption in different modes

Off (W) Stand-by (W) Delay start (W)

0.50 0.50 4.00

Time to Off/Standby mode is 15 minutes maximum.

15.4 Common programmes

These values are indicative only.

Programme

2)

Coton
95°C

Coton
60°C

kg kWh Litres hh:mm % °C

6 2.35 85 4:05 52 85 1400

6 1.75 80 3:50 52 55 1400

rpm

1)

1)

Coton 20°
20°C

Synthétiques
40°C

Délicats
30°C

3)

4)

6 0.30 80 2:50 52 20 1400

3 0.60 50 2:10 35 40 1200

2 0.30 50 1:00 35 30 1200

1

2

1

2

3

1 32

www.aeg.com34

Programme

Laine/Soie
30°C

1)
Reference indicator of the spin speed.

2)
Suitable for washing heavily soiled textiles.

3)
Suitable for washing lightly soiled cottons, synthetic and mixed fabrics.

4)
It also performs as quick washing cycle for lightly soiled laundry.

16. QUICK GUIDE

16.1 Daily use

Connect the mains plug to the mains
socket.

Open the water tap.

Load the laundry.

Pour the detergent and other treatment
in the proper compartment of the
detergent dispenser.

1. Push the Marche/Arrêt button to

turn the appliance on. Turn the
programme dial to set the desired
programme.

kg kWh Litres hh:mm % °C

1,5 0.20 45 1:05 30 30 1200

rpm

2. Set the desired options (1) by means
of the corresponding touch buttons.
To start the programme, touch the

Départ/Pause (2) button.

3. The appliance starts.

At the end of the programme, remove the
laundry.

Push the Marche/Arrêt button to turn
the appliance off.

1)

16.2 Cleaning the drain pump filter

Clean the filter regularly and, especially,

if the alarm code

appears on the

display.

16.3 Programmes

Programmes Load Product description

Eco 40-60 6 kg

White and coloured cottons. Normally soiled
garments.

ENGLISH 35

Coton

Synthétiques

Délicats

Laine/Soie

20 min. - 3 kg

Outdoor

Duvet

Repassage Facile

6 kg White cotton and coloured cotton.

3 kg Synthetic items or mixed fabric items.

2 kg

1,5 kg

3 kg

2 kg

1 kg

2 kg

3 kg

Delicate fabrics such as acrylics, viscose, poly‐
ester items.

Machine washable wool, hand washable wool
and delicates.

Cotton and synthetic lightly soiled items or once
worn items.

1)

Modern outdoor sporting garments.

2)

Synthetic or feather and down filled blankets,
padded clothes, duvets.

Synthetic items requiring a gentle wash. Nor‐

mally and lightly soiled items.

3)

All fabrics, except woollens and very delicate

Vidange/Essorage

6 kg

fabrics. Programme for spinning and draining
the water.

1)
Washing programme.

2)
Washing programme and waterproofing phase.

3)
To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin

phase. The appliance adds some rinses.

17. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of

appliances marked with the symbol

.

with the household waste. Return the
product to your local recycling facility or
contact your municipal office.

*

www.aeg.com/shop

135997912-A-312022