AEG L60805 User Manual

Download

Page 1

FÁCIL

PRELAVADO

MANCHAS

START/ PAUSA

ACLARADO

ACLARADO +

CENTRIFUGAR

FIN

PUERTA

PRELAVADO/ LAVADO

SOBRE DOSIF.

90E

60E

40E 40 30 FRIO

RESISTENTES

COLOR

SINT.MEZCLA

DELICADO

FRIO

ACLARADOS DELICADOS

SUAVIZANTES

DESAGUAR

CENTRIFUGAR

CENTRIF. DELICADO

LANA

FRIO

OFF

STOP ACLARAD.

1000 900 700 500

PRE-

SELECCI

DELICADOS

TIEMPO

PROGR. CORTO

INTENSIVO

LAVAMAT L 60805

La lavadora ecológica

The environmentally friendly washing machine

Instrucciones para el uso

Instruction booklet

PERFEKT IN FORM UND FUNKTION

Page 2

Dear customer,

Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.

The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance.

This symbol guides you, step by step, in the operation of the appliance.

The information marked with this symbol provides additional instructions and practical tips on the use of the appliance.

Tips and information about economical and ecological use of the machine are marked with the clover symbol.

Should any problems arise, this booklet provides instructions on how to solve them by yourself; see section “Something not working?”.

If this information is not sufficient, please contact our nearest SERVICE CENTRE.

Printed on recycled paper.

People who think ecologically, act accordingly…

Page 3

Contents

Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44-47

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Tips for environmental protection

Main features of your washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Programme selector dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

START/PAUSE (START/PAUSA) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

DELAY START (PRESELECCIÓN) button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Programme Option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

PREWASH (PRELAVADO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

STAIN (MANCHAS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

SENSITIVE (DELICADOS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

INTENSIVE (INTENSIVO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

QUICK WASH (PROGR. CORTO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

SPIN SPEED (CENTRIFUGADO) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

RINSE HOLD (STOP ACLARAD.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Programme progress display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Cancelling a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Altering a programme which is running. . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Opening the door after the programme has started. . . . . . . . . . . . . . . . . 56

Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Before the first wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Preparing the wash cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Sorting out and preparing the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Weight of laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Types of fabric and care labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59

Detergents and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Which detergent and additive? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

How much detergent?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Liquid detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Adding a water softener (descaling product) . . . . . . . . . . . . . . . . . . . . . . . . . 60

Information on water hardness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Page 4

Contents

How to wash

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Load the laundry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Add detergent and additives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Select the desired wash programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Select the desired options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Select the SPIN SPEED or RINSE HOLD (STOP ACLARAD.) option . . . . . . . . . 62

Select the EXTRA RINSE (ACLARADO +) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Select the DELAY START (PRESELECCIÓN) option . . . . . . . . . . . . . . . . . . . . . . 63

Starting the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Programme progress display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

At the end of the programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Programme charts: wash and special programmes . . . . . . . . . . . . . . . 66-68

Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

After each wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Periodical cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Door seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Drain pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Emergency emptying out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Frost precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Something not working? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73-75

Unsatisfactory washing results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Instructions for installation and electrical connection. . . . . . . . . . . . . . . 79

Safety instructions for the installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Water drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Permanent connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Page 5

Safety instructions

The safety of AEG/ELECTROLUX appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.

General safety

• Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local AEG/ELECTROLUX Service Force Centre.

• Never start the machine if the electrical supply cable is damaged or the control panel or worktop are so damaged that inner components can be reached.

• Unplug the appliance before carrying out any cleaning or maintenance operations.

• Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.

• Never spray the machine with a jet of water. Danger of electric shock!

• During high temperature wash programmes the door glass may get hot. Do not touch it!

• Let the water cool down before carrying out emergency emptying or before opening the door in an emergency.

• Small animals can gnaw electric wires and water hoses causing electrocution hazard and damage due to water leaks.

Positioning, connection, starting up

• Follow the instructions for positioning and connection.

• Carry out a first wash without laundry (COTTONS 90, with half the amount of detergent) in order to remove any manufacturing residue from the tub and the drum.

• Should the machine be purchased in winter, when temperatures can be below 0°, leave the appliance for 24 hours at ambient temperature before starting it.

Page 6

Safety instructions

Child safety

• Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance - there is a risk that they could become trapped inside.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not climb into the drum.

• When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing.

Proper use

• This appliance is designed for domestic use only. If the machine is used for any other purposes or is not used correctly, the manufacturer accepts no responsibility for any damage that might occur.

• For safety reasons, the appliance must not be modified.

• Use only detergents suitable for washing machines and follow the manufacturer’s instructions.

• Garments which have been in contact with flammable solvents should not be machine washed.

• Do not use your machine for dry cleaning.

• Dyes and bleaching agents may only be used if specifically permitted by the manufacturer of these products. We cannot be held responsible for any damage.

• Always unplug the appliance and turn off the water tap after use.

Page 7

Disposal

Packaging materials

The materials marked with the symbol are recyclable.

>PE<=polyethylene >PS<=polystyrene >PP<=polypropylene

This means that they can be recycled by disposing of them properly in appropriate collection containers.

Machine

Use authorised disposal sites for your old appliance. Help to keep your country tidy!

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Tips for environmental protection

To save water, energy and to help protect the environment, we recommend that you follow these tips:

• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

• Use the energy saving programmes when washing normally soiled garments.

• The machine works more economically if it is fully loaded.

• When small loads are washed, use only half to two thirds of the recommended amount of detergent.

• With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

Page 8

• If the water has a medium or high degree of hardness (starting from hardness degree II, see “Detergents and additives”) water softeners must be added. The amount of detergent can then be adjusted to hardness degree I (= soft).

Main features of your washing machine

• Programme and temperature setting using the programme selector.

• Stain option for effectively treating stained washing.

• Intensive option for heavy soiled laundry.

• Energy saving programmes (90E), (60E), (40E) for normally soiled cotton items.

• Speed for the final spin can be reduced to 900, 700 or 500 rpm.

• RINSE HOLD: the laundry is left immersed in the final rinse water to prevent creasing.

• Delay Start: programme start can be delayed up to 23 hours (e.g. to times with a more economical power rate).

• Programme progress display showing the programme steps selected and the programme phase which is running.

• Because of its gentle washing action, the special wool cycle washes your garments with extreme care.

• 4-compartment drawer for detergent, fabric softener and bleaching agent.

• Balance control device: to prevent vibration during spinning.

• The ECO valve allows total use of detergent and reduces water con- sumption so saving energy.

Page 9

Drain pump

Door

Control panel

Detergent drawer

Adjustable feet

FÁCIL

PRELAVADO

MANCHAS

START/ PAUSA

ACLARADO

ACLARADO +

CENTRIFUGAR

FIN

PUERTA

PRELAVADO/ LAVADO

SOBRE DOSIF.

90E

60E

40E

40 30

FRIO

RESISTENTES

COLOR

SINT.MEZCLA

DELICADO

FRIO

ACLARADOS DELICADOS

SUAVIZANTES

DESAGUAR

CENTRIFUGAR

CENTRIF. DELICADO

LANA

FRIO

OFF

STOP ACLARAD.

1000 900 700 500

PRE-

SELECCI

DELICADOS

TIEMPO

PROGR. CORTO

INTENSIVO

Description of the appliance

Front view

Page 10

A B C H I L

F G

FÁCIL

PRELAVADO

MANCHAS

START/ PAUSA

ACLARADO

ACLARADO +

CENTRIFUGAR

FIN

PUERTA

PRELAVADO/ LAVADO

SOBRE DOSIF.

90E

60E

40E

40 30

FRIO

RESISTENTES

COLOR

SINT.MEZCLA

DELICADO

FRIO

ACLARADOS DELICADOS

SUAVIZANTES

DESAGUAR

CENTRIFUGAR

CENTRIF. DELICADO

LANA

FRIO

OFF

STOP ACLARAD.

1000

900 700 500

PRE-

SELECCI

DELICADOS

TIEMPO

PROGR. CORTO

INTENSIVO

Description of the appliance

FÁCIL

90E

60E

40E

40 30

FRIO

RESISTENTES

COLOR

SINT.

MEZCLA

DELICADO

FRIO

ACLARADOS DELICADOS

SUAVIZANTES

DESAGUAR

CENTRIFUGAR

CENTRIF. DELICADO

LANA

FRIO

OFF

Control panel

A = PREWASH button B = STAIN button C = SENSITIVE button D = SPIN SPEED button E = INTENSIVE button F = QUICK WASH button G = DELAY START button H = START/PAUSE button I = Display L = Programme progress display M = Programme selector dial

Programme selector dial

The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.

The selector dial is divided into 5 sections:

• Cottons (RESISTENTES COLOR)

• Synthetics (SINT. - MEZCLA)

• Delicates (DELICADO)

• Woollens (LANA) (hand washing)

• Special programmes

• Reset programme O/OFF

The selector dial can be turned either clockwise or anticlockwise.

Page 11

Description of the appliance

Position 90E, 60E and 40E (economy) corresponds to the ENERGY SAVING programme for normally soiled laundry, extended washing time. They cannot be combined with QUICK WASH and INTENSIVE options (PROGR. CORTO y INTENSIVO).

Position FÁCIL =EASY TO IRON at 40°C

In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. This programme is not available with SENSITIVE option.

Position FRÍO = cold wash

START/PAUSE button

This button has two functions: a) Start

After having selected the required programme, press this button to start the machine. If you have selected the DELAY START option (PRESELECCIÓN), the machine starts its hourly countdown.

b) Pause To interrupt a programme which is running, press the START/PAUSE

button: the relevant light starts to flash. To restart the programme from the point at which it was interrupted,

press the START/PAUSE button again.

DELAY START button (PRESELECCIÓN)

The wash programme can be delayed from 30 min – 60 min – 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours by means of this button.

Selecting the delayed start

• Select the programme and the required options.

• Select the delay start.

• Depress START/PAUSE button: the machine starts its hourly count down.

The programme will start after the selected delay has expired.

Cancelling the delayed start

• Depress START/PAUSE button.

• Depress DELAY START button until the the symbol 0’ is displayed.

• Depress START/PAUSE button again to restart the machine

. • To modify the delay time, after the programme has already started,

set the programme again and select the new desired delay time.

Page 12

Description of the appliance

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

PREWASH (PRELAVADO)

The machine performs a prewash cycle before the main wash. The prewash cycle ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates.

This option is not available with the wool programme and cannot be used with SOAK.

To be used for heavily soiled laundry.

STAIN (MANCHAS)

To treat heavily soiled or stained laundry with stain remover (extended main wash with time optimised stain action phase, not selectable for wool, handwash or programmes with temperatures lower than 40°C). This function cannot be used with PREWASH.

SENSITIVE (DELICADOS)

If you depress this button, the washing machine adds one rinse in COTTONS and SYNTHETIC programmes and reduces the spinning of the drum and the washing intensity. To be uses for delicate color or lightly soiled cottons.

This option connot be selected with the EASY IRON programme.

INTENSIVE (INTENSIVO)

To be used for heavy soiled laundry. If you depress this button the washing intensity will be increased and the washing time will be prolonged by few minutes depending on the selected type of fabric. This option with all cotton and synthetic programmes. This option connot be selected with economy programmes and QUICK WASH option.

Important: By depressing at the same time buttons SPIN SPEED and INTENSIVE, the acoustic signal is suppressed when selecting the programmes, in case of incorrect option selection and at the end of the cycle.

Page 13

STOP ACLARAD.

1000

900 700 500

Description of the appliance

QUICK WASH (PROGR. CORTO)

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry. This option is not available with programme wool, handwash and economy programmes. Important: By depressing at the same time buttons SPIN SPEED and QUICK WASH the machine will perform an extra rinse (see page 63).

SPIN SPEED (CENTRIFUGADO)

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select option RINSE HOLD. The maximum spin speed for all fabrics is 1000 rpm.

RINSE HOLD (STOP ACLARAD.)

By selecting this option, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the START/PAUSE button goes off, the END pilot light (FIN) on the programme progress display illuminates, the DOOR light (PUERTA) is red and the display shows a static zero to indicate that the water must be emptied out.

To empty out water there are two possibilities:

• Select programme DESAGUAR (draining): The water is emptied out without spinning.

• Select programme CENTRIFUGAR (SPIN) or CENTRIF. DELICADO (DELICATE SPIN). Select the spin speed by means of the relevant button and then depress the START/PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed.

Warning! The programme selector dial must be turned first to RESET O/OFF and then to the DRAIN programme DESAGUAR or CENTRIFUGAR (SPIN) or CENTRIF. DELICADO (DELICATE SPIN).

Display

(TIEMPO)

The display shows the following information:

• Duration of the selected programme (in minutes), calculated automatically on the basis of the maximum recommended load for each type of fabric.

• When the programme has finished, a steadily lit zero is displayed.

• Delay start, (23 hours max.) programmed using the button PRESE- LECCIÓN. The countdown is updated every hour du-

Page 14

Description of the appliance

ACLARADO

ACLARADO +

CENTRIFUGAR

FIN

PUERTA

PRELAVADO/ LAVADO

SOBRE DOSIF.

RINSES

EXTRA

RINSE

SPIN

END

DOOR

PREWASH/

WASH

OVER-

DOSAGE

ring the first two hours and then every thirty minutes.

• Alarm code indicating a fault in the machine operation (see page 73).

Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on.

After the machine has started, only the running phase pilot light stays on. When the programme has finished, the FIN (End) pilot light comes on.

When the programme has finished, if the SOBRE DOSIF. light (Overdosage) comes on, it indicates that too much detergent has been used.

Cancelling a programme

To cancel a programme which is running, turn the programme selector dial to the RESET O/OFF position.

Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O/OFF and then to the programme DESAGUAR, CENTRIFUGAR or CENTRIF. DELICADO.

Altering an option or a programme which is running

To alter an option, first set the machine to PAUSE by pressing the START/PAUSE button.

Any option can be modified before the machine starts it. After selecting the new option press the START/PAUSE button again to re-start the selected programme.

To modify the selected programme turn the programme selector dial to O/OFF and then choose a new programme.

The water is not emptied out and after pressing the START/PAUSE button again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE button. The door can be opened if:

• the machine is not already heating;

• the water level is not above the bottom edge of the door;

• the drum is not turning.

Page 15

Description of the appliance

The PUERTA light (Door) on the control panel indicates if the door can be opened:

• green light: the door can be opened;

• red light: the door cannot be opened;

Detergent dispenser drawer

Compartment for prewash detergent and stain remover. The prewash detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash.

Compartment for powder or liquid detergent used for main wash. It is emptied at the beginning of the wash cycle.

Compartment for liquid additives (fabric softener, starch). It is emptied at the last rinse.

The quantity of additives must not exceed the “MAX” mark in the drawer.

Compartment for bleaching agent. It is emptied at the first rinse.

The quantity must not exceed the “MAX” mark in the drawer.

Page 16

Before the first wash

Before your first wash, we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve.

Then, run a cotton cycle at 90°, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.

Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.

Preparing the wash cycle

Sorting out and preparing the laundry

• Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”).

• Empty pockets.

• Remove any metal parts (safety pins, clips, etc.).

• To prevent the laundry from getting damaged and forming bundles, it is advisable to close zips, button up pillowcases and quilt covers and tie up loose straps such as those of aprons.

• Turn double faced items inside out (sleeping bags, anoraks, etc.)

• Turn coloured knitted fabrics, woollens and fabrics with trim inside out.

• Wash small and delicate items (baby socks, tights) inside a laundry net or in a pillow case closed with a zip, or in larger socks.

• Treat curtains with special care. Remove all metal or plastic hooks or put them in a net or a bag. We take no responsibility for any damage.

• Whites and coloureds must be washed separately: white items can loose their whiteness.

• New coloured fabrics often have excess dyes; it is advisable to wash them separately for the first time.

• Wash small and large items together; this improves the washing result and the laundry is better distributed during spinning.

• Shake out garments before putting them into the machine.

• Insert each garment separately.

Page 17

Preparing the wash cycle

Weight of laundry

Sort of laundry

Approximate

dry weights

1200 gBathrobes 300-600 gWork shirts 700 gQuilt covers 500 gSheets 100 gBlouses 200 gHand towels 100 gTea towels 200 gShirts 200 gPillowcases 200-250 gNight-gowns/Pyjamas 200-300 gTablecloths 250 gUnderwear

Types of fabric and care labels

The labels on garments help you to select the most suitable wash programme. The laundry should be sorted out according to the type of fabric and the instructions indicated on care labels.

Temperatures indicated on labels are always maximum temperatures.

Cotton

Linen and cottons marked with this symbol can be washed at high temperatures.

Cotton

Linen and cottons marked with this symbol are colourfast and can be washed at 60°C.

Cotton

Garments marked with these symbols have delicate colours, therefore the washing temperature must not exceed these values.

Synthetics

Mixed and synthetic fabrics marked with these symbols require a gentle wash programme and they must therefore be washed using the specific programme.

Page 18

Preparing the wash cycle

Delicates

Microfibres, synthetics or curtains marked with these symbols require a very gentle treatment. The DELICATES programme is suitable for this type of fabric.

Woollens and particularly delicate items

Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing. The WOOL programme is suitable for this type of fabric.

If the label has the symbol (do not wash), the garments must not be machine washed! The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M9604.

Page 19

Preparing the wash cycle

Detergents and additives

Which detergent and additive?

Use only detergents and additives for washing machines. Follow the manufacturer’s instructions.

How much detergent?

The quantity depends on:

• the load: if the manufacturer does not provide any indications on the amount of detergent for small loads, use about one third less than the suggested amount for half loads and half the amount for very small loads;

• the degree of soil: use a small amount of detergent for lightly soiled garments. Judge the amount according to the detergent manufacturer’s instructions and size of the load;

• the water hardness: the harder the water, the more detergent required. Instructions according to water hardness are given on the detergent pack.

Liquid detergent

Liquid detergent can be poured directly into the main wash compartment of the dispenser drawer immediately before starting the programme, or a special dispenser can be used that is placed directly in the drum. Measure the detergent according to the manufacturer’s instructions.

Adding a water softener (descaling product)

A water softener must be added when water has a medium-high degree of hardness (from degree of hardness II). Follow the manufacturer’s instructions. The quantity of detergent can then always be adjusted to degree of hardness I (= soft). Information on water hardness can be obtained from your local water supply authority.

Information on water hardness

Degree of hardness French degrees °TH

German degrees °dH

0-7I=Soft

0-15 16-257-14II=Medium 26-3715-21III=Hard

more than 37more than 21IV=Very hard

Page 20

Preparing the wash cycle

How to wash

Load the laundry

Open the door. Place the laundry in the drum, one item at a time. Distribute laundry as

evenly as possible. Close the door.

Add detergent and additives

Pull the drawer out till it stops. Pour the main

wash detergent into compartment

If you wish to perform a PREWASH, or a STAIN-Action programme, pour detergent or stain remover into compartment .

Important! Do not use normal detergent for the STAIN-Action programme, always use a STAIN remover.

Pour the fabric softener into compartment and the bleaching agent into compartment without exceeding the “MAX” mark.

Close the drawer gently, pushing it fully in.

Page 21

How to wash

FÁCIL

ACLARADO

ACLARADO +

CENTRIFUGAR

FIN

PUERTA

PRELAVADO/ LAVADO

SOBRE DOSIF.

90E

60E

40E

40 30

FRIO

RESISTENTES

COLOR

SINTÉTICOS

/MEZCLA

DELICADO

FRIO

ACLARADOS DELICADOS

SUAVIZANTES

DESAGUAR

CENTRIFUGAR

CENTRIF. DELICADO

LANA

FRIO

OFF

PRELAVADO

MANCHAS

DELICADOS

PROGR.

CORTO

INTENSIVO

STOP ACLARAD.

1000

900 700 500

Select the desired wash programme

Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. The display shows the duration of the programme.

Select the desired options

depending on the degree of soil of the laundry. The corresponding light comes on.

Select the spin speed or RINSE HOLD option

It is possible to select a lower spin speed by means of the relevant button; the light corresponding to the selected speed comes on.

Selecting the option RINSE HOLD the laundry is left immersed in the final rinse water.

If the spin speed is not reduced, the final spin speed will be as follows:

- cottons 1000 r.p.m.

- synthetics 1000 r.p.m.

- delicates 1000 r.p.m.

- wool (hand washing) 1000 r.p.m.

Page 22

EXTRA RINSE (ACLARADO +)

This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse).

The extra rinse is available only with the cotton, synthetics or delicate programme and with programme ACLARADOS DELICADOS (RINSES).

Selection of the EXTRA RINSE option

Press simultaneously the buttons CENTRIFUGADO (SPIN SPEED) and PROGR. CORTO (QUICK WASH) for about 3 seconds: the light ACLARADO + comes on in the programme progress display.

This function stays permanently on. To remove it press the buttons CENTRIFUGADO (SPIN SPEED) and PROGR. CORTO (QUICK WASH) again until the light ACLARADO + comes off.

Select the DELAY START option

To delay starting of a programme, press the PRESELECCIÓN (DELAY START) button before starting the machine. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display.

When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown.

How to wash

Page 23

ACLARADO

ACLARADO +

CENTRIFUGAR

FIN

PUERTA

PRELAVADO/ LAVADO

SOBRE DOSIF.

RINSES

EXTRA

RINSE

SPIN

END

DOOR

PREWASH/

WASH

OVER-

DOSAGE

How to wash

Starting the programme

1. Check that the water tap is open.

2. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the countdown. If on the display appears the alarm code E40 at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours for the first two hours and then every 30 minutes, which will appear on the display. During this period it is possible to load other laundry, or to cancel the delay time.

• Load other laundry: press the START/PAUSE button. Open the door.

Load the laundry. Close the door and press the START/PAUSE button again.

• Cancel the delay time: press the START/PAUSE button. Press the

DELAY START button until the symbol 0’ appears on the display. Press the START/ PAUSE button again if you wish to restart the programme.

Programme progress display

By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on.

Display

The time to the end of the programme decreases minute by minute and appears on the display.

Page 24

At the end of the programme

The machine stops automatically. A steadly zero appears on the display. The FIN (END) light comes on in the programme progress display.

If the RINSE HOLD option has been selected, the START/PAUSE button goes off, the pilot light END on the programme progress display illuminates, the light PUERTA is red and the display shows a static zero to indicate that the water must be emptied out.

To empty out water there are two possibilities:

• Select programme DESAGUAR (draining): The water is emptied out without spinning.

• Select programme CENTRIFUGAR (spin) or CENTRIF. DELICADO (delicate spin). Select the spin speed by means of the relevant button and then depress the START/PAUSE button. The water is emptied out and the laundry is spun at the selected spin speed.

Warning! The programme selector dial must be turned first to RESET O/OFF and then to the DRAIN programme DESAGUAR, CENTRIFUGAR (spin) or CENTRIF. DELICADO (delicate spin).

Turn the selector dial to O/OFF to switch the machine off. Remove the laundry from the drum. Check that the drum is empty so as to avoid any forgotten items

being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

Close the water tap. Leave the door open to prevent the formation of mildew and unpleas-

ant smells.

How to wash

Page 25

Programme chart

Wash programmes for cottons

Wash

programme

White

Cottons

and Linens

90E

Whites

ECONOMY

60E

Cottons

ECONOMY

40E

Coloured

cottons

ECONOMY

Coloured

cottons

Temp.

90°

90E

(●)60E

40E Non fast-coloureds.

40°-30°

FRIO

(Cold)

Fabrics

Cotton and linen, for example normally soiled work garments, sheets, household linen, underwear, towels.

White cotton and linen, for example normally to lightly soiled sheets and household linen.

Whites and fastcoloureds.

Coloured cotton or linen fabric, shirts, underwear, towels.

Additional

functions

PREWASH STAIN SENSITIVE INTENSIVE QUICK WASH EXTRA RINSE RINSE HOLD SPIN SPEED

PREWASH STAIN SENSITIVE EXTRA RINSE RINSE HOLD SPIN SPEED

PREWASH STAIN** SENSITIVE INTENSIVE QUICK WASH EXTRA RINSE RINSE HOLD SPIN SPEED

Max.

load

6 kg

Consumption*

Energy

kWh

2.3

1.55

1.02

1.14

0.6

Water lt.

(●)

In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the “60E” wash programme for cotton.

* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme.

** Only at 40°.

For the duration of the programmes, please refer to the display on the control panel

Page 26

Programme chart

Special programmes

Wash

programme

Synthetics

Temp.

60°-50°

40°

FRIO

(Cold)

40°

Fabrics

Synthetic fabrics, underwear, coloured garments, non-shrink shirts, blouses.

Synthetics, easy iron.

Additional

functions

PREWASH STAIN** SENSITIVE INTENSIVE QUICK WASH EXTRA RINSE RINSE HOLD SPIN SPEED

PREWASH STAIN QUICK WASH EXTRA RINSE RINSE HOLD SPIN SPEED INTENSIVE

Max.

load

3 kg

1.5 kg

Consumption*

Energy

kWh

0.95

0.4

Water lt.

PREWASH QUICK WASH EXTRA RINSE RINSE HOLD SPIN SPEED

RINSE HOLD SPIN SPEED

3 kg

2 kg

0.55

0.35

Delicates

Wool

Hand wash

40°-30°

FRIO

(Cold)

40°-30°

FRIO

(Cold)

Delicate fabrics, for example curtains.

Wool, wool mixtures, silk.

For the duration of the programmes, please refer to the display on the control panel

Page 27

Programme chart

Wash programmes for synthetics, delicates and wool

Consumption*

Energy

kWh

0.05

Water

lt.

Duration

min.

Programme

ACLARA-

DOS DELI-

CADOS

(Gentle

rinses)

SUAVIZAN-

TES

(Softeners)

DESA-

GUAR

(Drain)

CENTRIFU-

GAR

(Spin)

CENTRIF.

DELICADO

Short spin

ANULACION/

PARADA

O/OFF

(Reset/Off)

Descrip-

tion

This programme can be used for rinsing hand washed garments.

Hand washed garments to be starched or softened.

For emptying out the last rinse water in programmes with the RINSE HOLD option

Separate spin for cottons.

Separate spin for synthetics, delicate fabrics and wool.

Programme phases

3 rinses with liquid additive. Short spin.

1 rinse with liquid additive. Long spin.

The water is emptied out.

Long spin.

Short spin.

For cancelling the programme which is running or to switch the machine off.

Additional

functions

EXTRA RINSE SENSITIVE RINSE HOLD SPIN SPEED

RINSE HOLD SPIN SPEED

SPIN SPEED

Max.

load

6 kg

3 kg

* The consumption data shown on this chart is to be considered purely indica tive, as it may vary depending on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme.

** Not with the position FRIO (Cold).

For the duration of the programmes, please refer to the display on the control panel

Page 28

Cleaning and maintenance

After each wash

At the end of the wash programme, pull the dispenser drawer out a little to let it dry.

Leave the door ajar to allow air to circulate.

If the machine is not used for a prolonged period:

Close the water tap and unplug the appliance.

Periodical cleaning

Exterior

Clean the outside of the cabinet with soap and water only. Rinse with clean water and dry.

Important: do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

After a while, detergents and fabric softeners leave deposits in the drawer.

Clean the drawer, from time to time, by rinsing it under a running tap. To remove the drawer from the machine, press the button in the rear left-hand corner.

To facilitate cleaning, the top part of the additive compartments can be removed.

Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush.

Refit the drawer after cleaning.

Page 29

Cleaning and maintenance

Door seal

Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.

Drain pump

The pump should be inspected regularly and particularly if the machine does not empty and/or spin

the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.

Proceed as follows: Disconnect the appliance. If necessary wait until the water has cooled down. Open the pump door.

Place a container close to the pump to collect any spillage.

Release the emergency emptying hose, place it in the container and remove its cap.

When no more water comes out, unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.

Page 30

Remove any objects from the pump impeller by rotating it.

Put the cap back on the emergency emptying hose and place the latter back in its seat.

Screw the pump fully in. Close the pump door.

Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked.

Turn off the water tap. Unscrew the hose from the tap. Clean the filter in the hose with a stiff brush. Screw the hose back onto the tap.

Cleaning and maintenance

Page 31

Cleaning and maintenance

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

pull out the plug from the power socket; close the water tap; if necessary, wait until the water has cooled down; open the the pump door; place a bowl on the floor and place the end of the emergency emptying hose

into the bowl. Remove its cap. The water should drain by gravity into the bowl. Whe the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out;

clean the pump if necessary as previously described; replace the emergency emptying hose in its seat after having plugged it; screw the pump again and close the door.

Frost precautions

If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows:

Close the water tap and unscrew the water inlet hose from the tap. Place the end of the emergency emptying hose and that of the inlet hose in

a bowl placed on the floor and let water drain out. Screw the water inlet hose back on and reposition the emergency emptying

hose after having put the cap on again By doing this, any water remaining in the machine is removed, avoiding ice forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is above 0°C.

Important

Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO valve avoiding that part of the detergent remains unused at next washing.

Page 32

Something not working?

If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by traditional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation it is possible that an acoustic warning signal sounds, the FIN (END) light blinks and the following alarm codes may be displayed:

- E10: problem with the water supply

- E20: problem with water draining

- E40: door open

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local AEG/ELECTROLUX Service Force Centre.

Problem

The machine does not work

Possible cause

The main electrical fuse Replace the fuse. has blown.

The door is not properly Close the door; the click closed (E40). of the lock should be heard.

The plug is not connected. Insert the plug. The START button has not Press the button.

been pressed. The DELAY START Check the selected delay on

option has been selected. the display.

Solution

Page 33

Something not working?

Problem

The machine does not fill

The machine fills then empties immediately

The machine does not empty and/or does not spin

There is water on the floor

Possible cause

The water tap is closed (E10). Open the water tap. The water inlet hose is Check the whole length of the

squashed or kinked (E10). hose and remove the kink. The small filter of the water Clean the filter.

inlet hose is clogged (E10). The door is not properly Close the door.

closed (E40).

The end of the drain hose Place the hose at the right is too low. height (see Installation

section).

The drain hose is Check the whole length of squashed or kinked (E20). the hose and remove the

kink.

The drain pump or the Clean the pump or check drain hose are clogged (E20). the hose.

The RINSE HOLD option Empty out the water by (stop with water in drum) selecting the DRAIN has been selected. programme.

The laundry is not evenly Redistribute the laundry distributed inside the drum. manually in the drum.

Too much detergent has Measure detergent been used. according to the

manufacturer’s instructions.

An unsuitable detergent Use a suitable washing has been used that machine detergent. creates too much foam.

One of the connectors on Check that the hose is the water inlet hose is firmly screwed on at both leaking. ends.

The drain pump has not Fully screw the pump into been properly screwed on place. after cleaning.

The cap on the emergency Replace the cap on the emptying hose has not been emergency emptying hose replaced after cleaning the after cleaning the pump. pump.

Solution

Page 34

Something not working?

Problem

The machine vibrates or is noisy

The door will not open

Spinning starts late or the machine does not spin

Possible cause

The transit bolts have Check that the machine not been removed. has been unpacked as

described in the Installation section.

The feet have not been Carefully level the machine. adjusted.

There is little laundry in Correct operation of the the drum. machine is not affected.

The programme is still Wait until the end of the running and the drum programme before opening is turning. the door.

The water level is above the Before opening the door, bottom edge of the door. the water must be emptied

out.

The machine is heating the Wait until the end of the water. heating phase.

The unbalance detection If the laundry is not evenly device that prevents distributed inside the drum excessive vibration during at the beginning of the spinning has cut in. spin cycle, the machine

detects this and tries to redistribute it more evenly by means of a few drum rotations. Only when the laundry is more evenly distributed will the spin cycle be performed, at a lower speed, if the laundry is not evenly distributed. If, after about 10 minutes, the laundry is still tangled, the machine will not spin. Therefore, if the laundry is still wet at the end of the cycle, it is advisable to redistribute it manually inside the drum and to select the spin programme.

Solution

Page 35

Something not working?

Unsatisfactory washing results

If the laundry looks grey and lime scale is found in the drum

• Too little detergent has been used.

• An unsuitable detergent has been used.

• Stubborn stains have not been treated prior to washing.

• The programme/temperature has not been correctly selected.

If grey stains remain on the laundry

• Laundry stained with ointments, grease or oil has been washed with an insufficient amount of detergent.

• The temperature selected for the wash programme was too low.

• Fabric softener - especially the concentrated type - has come into direct contact with the laundry. Wash these stains immediately and pour fabric softener carefully.

Foam is still visible even after the last rinse

• Modern detergents often produce foam, even in the last rinse. However the laundry has been completely rinsed.

White residue is left on the laundry

• This is due to insoluble components in modern detergents and is therefore not the result of insufficient rinsing. Shake or brush the laundry. In future, it may be better to turn garments inside out before washing them. Check the choice of detergent; try using liquid detergents.

Page 36

Technical data

Height x Width x Depth 85x60x63 cm Depth with door opened 101.5 cm Height adjustment ± 10 mm approx. Load (depending on programme) 6 kg max. Use domestic Drum speed during washing max. 55 rpm Drum speed during spinning 1000/900/700/500 rpm Water pressure 0.05 - 0.8 MPa

This appliance complies with the following EC directives:

- 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive 93 / 68 / EEC

- 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.

Page 37

Service

Made in EEC

Mod. L74900 Type P6968538 Prod.No. 914526308 00 220-230V~50Hz 2200 W 10 A

Ser.No.

IPX4

ELECTROLUX ELECTRODOMESTICOS C.I.F. A-08145872 ESPAÑA,S.A.

In the section “Something not working?” some problems that can be solved by yourself are listed. Read this section in the event of problems. If you are not able to find a solution, contact the Service centre.

In all cases, explain your problem carefully, in order to facilitate troubleshooting: the engineer will be able to decide whether a service call is necessary.

Take note of the serial number (Ser.No.) and the product number (Prod. No.) indicated on the rating plate.

Ser. No. . . . . . . . . . . . . . . . . . . . . . . .

Prod. No. . . . . . . . . . . . . . . . . . . . . . .

Furthermore, try to specify, as precisely as possible:

- The symptoms of the fault

- When the fault occurs

- The alarm code displayed

When can a service visit be charged during the guarantee period?

- when it should have been possible to solve the problem by yourself, with the help of the troubleshooting chart (see section “Something not working?”)

- when the engineer has to come out several times because he has not been given all the relevant information he needs and so, for example, has to fetch spare parts. Repeated trips can be avoided if you prepare your call to the Service centre as described above.

Page 38

Instructions for installation and electrical connection

Safety instructions for the installer

• This appliance is heavy, care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer.

• All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.

• Any electrical work required to install this appliance must be carried out by a qualified electrician.

• Any plumbing work required to install this appliance must be carried out by a qualified plumber.

• After having installed the machine, check that it is not standing on its electrical supply cable.

• If the appliance is placed on a carpeted floor, ensure that air can circulate freely between the adjustable feet and the floor.

• The installation should comply with local water authority and building regulations requirements.

• Should the appliance power supply cable need to be replaced, this should be carried out by our Service Force Centre.

Page 39

nstallation

HEC0008

HEC0002S

HEC0001

HEC0011S

HEC0003S

HEC0014

Unpacking

All transit bolts and packing must be removed before using the appliance.

After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.

Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.

With a suitable spanner, supplied with the machine unscrew and remove the central rear bolt A. Slide out the relevant plastic spacer.

Unscrew and remove the two large rear bolts B and the six smaller bolts C.

Remove the bracket D. Tighten up the six smaller bolts C.

Page 40

Open the porthole,

HEC0005

HEC0010

P0002

take out the inlet hose from the drum and remove the polystyrene block fitted with the adhesive tape on the door seal.

Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.

Important!

All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet.

Connect the water inlet hose as described under the paragraph “Water inlet”.

Positioning

Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by

carpets, rugs etc.

• Before placing it on small tiles, apply a rubber coating.

• Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.

• If it is impossible to avoid positioning the machine next to a gas cooker or coal-burning stove, an insulating panel (85x57 cm) covered with aluminium foil on the side facing the cooker or stove, must be inserted between the two appliances;

• The machine must not be installed in rooms where the temperature can drop below 0.

• The water inlet hose and the drain hose must not be kinked.

• Please ensure that when the appliance is installed, it is easily accessible for the engineer in the event of a breakdown.

Installation

Page 41

Installation

HEC0006

P1088

Levelling

Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.

Water inlet

Attention!

• An inlet hose is supplied and can be found inside the machine drum.

• Do not use the hose from your previous machine to connect to

the water supply.

• This appliance must be connected to a cold water supply.

1. Open the porthole and extract the inlet hose.

2. Connect the hose with the angled connection to the machine.

Important! Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap.

3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.

4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance.

Installation should comply with local water authority and building regulations’ requirements. A minimum water pressure of 0.05 MPa (0.5 bar) is required for safe operation of the appliance.

If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum distance of 5.02m (16.5 ft) between theappliance’s inlet and the bottom of the water storage tank.

Page 42

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end

cannot come unhooked when the machine is emptying.

This could be done by tying it to the tap with a piece of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground.

Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm.

The end of the drain hose must always be venti- lated, i.e. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose.

The drain hose must not be kinked.

For a correct functioning of the machine the drain hose must remain hooked on the proper support piece situated on the top part of the back side of the appliance.

Installation

Important!

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Centre.

Page 43

Electrical connection

This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply.

Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use.

Connect the machine to an earthed socket. The manufacturer does not accept any responsibility for damage or

injury through failure to comply with the above safety precaution.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

This operation must be performed by a qualified electrician. Important: The power supply cable must be easily accessible after

installing the machine.

Page 44

AEG/Electrolux Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg

Subject to change without notice

From the Electrolux Group. The world’s No. 1 choice.

The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.

AEG L60805 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual