AEG KO-LAMAVAT 76730 User Manual

ÖKO-LAVAMAT 76730 update

The environmentally friendly washing machine

User information

Dear Customer,

Please read this user information carefully.
Pay particular attention to the section "Safety" on the first Info pages.
Please keep this user information in a safe place for later reference.
Pass it on to any future owners of the unit.

The warning triangle and /or signal words (Warning!, Caution!, Impor-

1

tant!) emphasise information which is important for your safety or for
the unit's functional reliability. It is imperative that this information is
observed.

0 1. This symbol guides you step by step through the operation of the appli-

ance.

2. ...

Next to this symbol you will find additional information and practical

3

tips on using the appliance.
Tips and information on economical and environmentally responsible

2

use of the unit are identified with the clover leaf.

For any faults which occur, this user information contains information
on how to remedy these faults yourself. See the section "What to do
if ..."

Printed on recycled paper.
Thinking ecologically means acting ecologically.

2

Contents

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Environmental tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Unit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Drawer for detergent and care agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Program Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Additional Program Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Consumption Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

What does "UPDATE“ mean? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Water Protection Aqua Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Before the First Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Prepare washing cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Sort washing and prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Washing Types and Care Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Washing Detergents and Care Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Which washing detergent and care agent? . . . . . . . . . . . . . . . . . . . . . . 17

How much washing detergent and care agent? . . . . . . . . . . . . . . . . . . . 17

Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Run a Washing Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Brief Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Setting the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Changing the spin speed/Selecting the rinse hold function . . . . . . . . . . . . 20

Set the Delay Timer/Soaking Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Opening and Closing the Filling Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Add the washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Add Washing Detergent/Care Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Start the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Completion of the Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Changing a Washing Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Washing Cycle Ended/Remove Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

3

Program Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Separate Conditioning/Starching/Impregnating . . . . . . . . . . . . . . . . . . . . 29

Separate Rinse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Separate Spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Detergent Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Washing Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Main door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Remedying Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

If the washing results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Carrying out emergency drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Drain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Additional Rinse (RINSE+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Child Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Installation and connection instructions . . . . . . . . . . . . . . . . 41

Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Installation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Remove transport packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Prepare the installation place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Installation on a concrete base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Installation on vibrating floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Compensate for floor unevenness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4

Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Water inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Delivery heads over 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Warranty conditions / Customer service centres . . . . . . . 50

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

5

Operating Instructions

Operating Instructions

1 Safety

The safety aspects of AEG electrical appliances comply with accepted
technical standards and the German Appliance Safety Law. However, as
manufacturers we regard it as our responsibility to inform you about
the following safety instructions.

Before Using for the First Time

• Refer to the "Installation and Connection Instructions" further on in

this user information.

• If units are delivered in the winter months at minus temperatures:

Store the washing machine at room temperature for a few hours be­fore putting it into operation.

Correct Use

• The washing machine is only intended for washing normal domestic

washing. If the appliance is used for a wrong purpose or wrongly op­erated, the manufacturer cannot assume any liability for any dam­ages.

• Additions or modifications to the washing machine are strictly for-

bidden due to safety reasons.

• Use only detergent which is suitable for washing machines. Refer to

the detergent manufacturer's instructions.

• The washing must not contain any flammable solvents. Also bear this

in mind when washing pre-cleaned washing.

• Do not use the washing machine for dry-cleaning.

• Dyes /dye-removing agents may only be used in the washing machine

if the manufacturer expressly permits use of these products. We can­not accept liability for any damage.

• Use only water from the water mains. Use rain water or service water

only if it meets the requirements defined in DIN 1986 and DIN 1988.

• Frost damage is not covered by the warranty! If the washing machine

is in a room subject to possible frost hazards, emergency emptying
must be carried out if there is a risk of frost (see the Section "Carry­ing out emergency emptying“).

6

Operating Instructions

Safety of Children and Infirm Persons

• Packaging materials (e.g. films, polystyrene) can be dangerous for

children. Risk of suffocation! Keep packaging away from children.

• The appliance is not intendet for use by young children or infirm per-

sons without supervision.

• Children frequently cannot recognise hazards involved in handling

electrical appliances. Therefore, ensure that they are properly super­vised during operation and never allow children to play with the
washing machine -there is arisk that they can lockthemselves inside it.

• Ensure that children or small animals do not climb into the washing

machine's drum.

• When disposing of washing machines pull out the mains plug, destroy

the door lock, cut off the electrical supply lead and dispose of the
plug and remaining cable. This means that playing children cannot
shut themselves in and cannot encounter a potentially lethal hazard.

General Safety

• Repairs to the washing machine may only be carried out by qualified

specialists. Incorrect repairs may result in significant risk to the user.
If repairs are necessary, consult our customer service or your special­ist dealer.

• Never use the washing machine if the mains cable is damaged or the

conrol panel, work surface or base panel area are so badly damaged
that the interior of the unit is openly accessible.

• Switch off the washing machine before carrying out cleaning, care

and maintenance work. Also pull the mains plug out of the socket or,
– if it is permanently connected, – switch off the circuit breaker at
the household power distribution box or completely remove the
screw-in fuse.

• If operation is stopped, disconnect the appliance from the mains sup-

ply and shut off the tap.

• Never pull the cable to remove the plug from the socket. Always

pull the plug itself.

• Multiple connectors, couplings and extension cables must not be

used. There is a risk of fire with overheating!

• Do not spray down the washing machine with a water jet. Risk of

electric shock!

7

Operating Instructions

• The glass in the door becomes hot in the case of wash programmes

with high temperatures. Do not touch!

• Allow the washing solution to cool before carrying out an emergency

emptying operation or cleaning the drain pump.

• Small animals can chew the power cables and water hoses. Risk of

electric shock and danger of water damage! Keep small animals away
from the washing machine.

2 Disposal

Disposing of the Packaging Material!

Dispose of the packaging of your washing machine correctly. All pakka­ging materials used are environmentally-compatible and recyclable.

• Plastic parts are identified with internationally standardised abbrevi-

ations:

>PE< for polyethylene, e.g. packing films.
>PS< for polystyrene, e.g. cushion parts (always CFC-free)
>POM< for polyoxymethylene, e.g. plastic clips.

• Cardboard packaging is manufactured from recycled paper and

should be deposited in the waste paper collection for recycling.

Disposing of your old appliance!

When you put your unit out of operation one day, please bring it to
your nearest recycling centre or to your dealer.

8

Operating Instructions

2 Environmental tips

• A pre-wash cycle is not necessary in the case of washing which is not

excessively dirt. This saves detergent, water and time (and is gentle on
the environment.)

• If the indicated load capacities are taken full advantage of, the wash-

ing machine is especially efficient.

• For small loads, use only one half to one third of the recommended

detergent quantity.

• Suitable pre-treatment enables marks and limited amounts of dirt to

be removed. You can then wash at a lower temperature.

• Wash slightly to normally dirty cottons with the energy-saving pro-

gram.

• There is often no need for the softener. Try it once! If you use a drier,

your washing will become soft and fluffy even without a softener.

• In the case of medium to high water hardness (hardness range runs to

upwards, see "Detergent and care agents“), you should use a water
softener. The detergent can then always be metered for hardness
range I (= soft).

9

Operating Instructions

Unit description

Front view

Drawer for de­tergent and
conditioner

Screw feet
(height-adjustable);
rear left: Automatic
adjustment foot

Control panel

Rating plate
(behind filling door)

Filling door

Flap in front of
the drain pump

Drawer for detergent and care agent

Main wash detergent
(powder form) and
possibly water softener

10

Stain removers

Pre-wash detergent/
soaking agent or
water softener

Liquid care agents
(conditioner,
finisher, starch)

Control panel

Operating Instructions

Spin speed / RINSE HOLD button

Additional program

buttons

DOOR Indicator

Multi-display

Button DELAY TIMER

START/PAUSE button

Program Selector

The program selector determines
the type of washing cycle (e.g.
water level, drum movement,
number of rinses, spin speed) ac­cording to the type of garments
being washed, and
also the washing solution.

Program sequence display

Program selector

OVER DOSING display

OFF

Switches off the washing ma­chine. All other positions
are "switched on".

COTTONS/LINEN

Main washing cycle Cottons/Linen at 30 °C to 95 °C.
ENERGY SAVING position: Energy-saving program at approx. 67 °C for

2

slightly to normally dirty cottons, extended washing time (cannot be
combined with QUICK WASH).

11

Operating Instructions

EASY-CARES

Main washing cycle for easy-care textiles (mixed fabrics) at 40 °C to
60 °C.

EASY IRON position: Main washing cycle at 40 °C for easy-care textiles
which, with the aid of this program, only have to be either gently
ironed or not ironed at all.

DELICATES

Main washing cycle for delicates at 30 °C or 40 °C.

WOOL/P (Handwash)

Main washing cycle (cold up to 40 °C) for machine-washable woollens
and for hand-washable wool textile and silk with the care symbol
ï (handwash).

GENTLE RINSE

Separate gentle rinse e.g. for rinsing hand-washed textiles (2 rinses,
liquid care agent from rinsing compartment æ is added, short spin).

STARCHING

Separate starching, separate conditioner, separate impregnation of
damp washing (1 rinse, liquid care agent from the rinsing compartment
æ is added, spin).

PUMP OUT

Pumping off the water after a rinse hold (without spin).
RINSE HOLD means: The washing remains lying in the last rinsing water.

3

It is not spun.

12

SPIN

Pumping off the water after a rinse hold and spin, or separate spin of
hand-washed cottons/linen.

SHORT SPIN

Pumping off the water after a rinse hold and short spin or separate
short spin of sensitive textiles (easy-care washing, delicates, woollens).

Operating Instructions

Additional Program Buttons

The additional program buttons are for adapting
the washing program to the dirtiness of the wash­ing. Additional programs are not required for
washing which is not excessively dirty.
Various functions can be combined with each
other, depending on the program.

PRE WASH

Warm pre wash before the main washing cycle
which follows on automatically; with intermediate
spin for COTTONS/LINEN and EASY-CARES, with­out intermediate spin for DELICATES.
If RINSE HOLD has been selected, no spinning will take place at all.

SOAKING

Approximately 50 minutes at 30°C water temperature. Extendable with
the button DELAY TIMER to max. 10 hours and approx. 20 minutes. This
is followed automatically by the main wash.

QUICK WASH

Shorter washing cycle for slightly dirty washing.

STAIN

For treating very dirty washing or stained washing. In-wash stain treat­ment is added during the program on a time-optimized basis. May only
be used for wash temperatures from 40°C as stain removers only be­come effective at higher temperatures.

With the program WOOL/P (handwash), it is not possible to select the

3

additional programs (any pressed buttons have no effect).

13

Operating Instructions

Consumption Values

The values for selected programs in the following tables were deter­mined under normal conditions. However, there is a helpful orientation
aid for domestic operation.

Program Selector/Temperature

COTTONS/LINEN 95 5 45 1.70

COTTONS/LINEN 60

COTTONS/LINEN 40 5 49 0.60

EASY-CARES 40 2.5 54 0.50

DELICATES 30 2.5 50 0.30

WOOL/P (Handwash) 30 2 48 0.20

1) Note: Program setting for a test in accordance with EN 60 456. The consumption

values can deviate from the stated values depending on the water pressure,
hardness, inlet temperature, room temperature, type and quantity of washing,
the washing powder/liquid used, fluctuations in the mains voltage and selected
additional functions.

1)

Filling Quantity

in kg

5 42 0.94

Water

in Litres

What does "UPDATE“ mean?

Your washing machine's washing programs are controlled by software.
New types of textiles or new detergents may require new washing pro­grams in the future. In most cases, the software can be adapted to this.
For further information on the "update“, please consult the Customer
Service. You can also enquire about the costs for an "update“ with your
Customer Service.

Energy

in kWh

Water Protection Aqua Control

In the event of damage to the supply hose, the system blocks the fur­ther supply of water to the unit directly at the water tap.
If water escapes elsewhere, the drainage pump automatically pumps
off – even if the unit is switched off. The washing machine merely has
to be connected to the electricity mains.

14

Operating Instructions

Before the First Wash

0 Carry out a washing operation without washing (COTTONS 95 °C, with

half the quantity of washing powder/liquid).
This removes residues left over from production on the drum and solu­tion container.

Prepare washing cycle

Sort washing and prepare

• Sort the washing according to the care symbol and type (see "Wash-

ing types and care codes").

• Empty all pockets.

• Remove metal objects (paper clips, safety pins etc.).

• To prevent damage to the washing and tangled washing: Close zip

fasteners, button bed and pillow covers closed, tie up loose strings
e.g. of aprons.

• Turn articles with double layered textiles inside out (sleeping bags,

anoraks etc.).

• In the case of knitted coloured textiles and also with wool and tex-

tiles with jewelry attached: turn inside out.

• Wash small and sensitive items (e.g. baby socks, tights and stockings,

bras etc.) in a washing net, a cushion with a zip fastener or in larger
socks.

• Handle curtains with particular care. Metal rollers or burred, plastic

rollers must be removed or tied into a net or bag. We cannot accept
liability for damage.

• Coloureds and white items must not be washed together in a washing

cycle. This could discolour white washing or turn it grey.

• There is often excess dye in new, coloured items. It is best to wash

such items separately the first time.

• Mix small and large items. This improves the washing effect and the

washing is more favourably distributed during spinning.

• Fluff washing before placing into the washing machine.

• Do not place folded washing into the drum.

• Pay attention to the care instruction "wash separately" and "wash

separately several times".

15

Operating Instructions

Washing Types and Care Codes

The care codes help you choose the correct washing program.
The washing should be sorted according to type and care code.
The temperatures stated in the care codes are all maximum values.

Cottons ç

Textiles made of cotton and linen with this care code are insensitive to
mechanical stress and high temperatures. The program COTTONS/LINEN
is suitable for this type of washing.

Linen èë

Textiles made of cotton and linen with this care code are insensitive to
mechanical stresses. The program COTTONS/LINEN is suitable for this
type of washing.

Easy-Care Garments êí

Textiles such as finished cottons, cotton mixtures, viscose and synthet­ics with this care code require mechanically more mild treatment. The
program EASY-CARES/EASY IRON is suitable for this type of washing.

Delicates ì

Textiles such as layered fibres, microfibres, viscose, synthetics and cur­tains with this care code require very gentle treatment.
The program DELICATES is suitable for this type of washing.

16

Wool and Very Sensitive Washing 9ìï

Textiles such as wool, wool mixtures and silk with this care code are es­pecially sensitive to mechanical stresses.
The program WOOL/P (Handwash) is suitable for this type of textiles.

Attention! Textiles with the care codeñ (Do not wash!) must not be
washed in the washing machine!

Operating Instructions

Washing Detergents and Care Agents

Which washing detergent and care agent?

Use only washing detergents and care agents which are suitable for use
in washing machines. Always follow the manufacturer's instructions.

How much washing detergent and care agent?

The amount to be used depends on:

• the dirtiness of the washing

• the hardness category of the mains water supply

• the filling quantity

If the detergent manufacturer gives no details of the dosing quantities

2

for minimum loads, add one third less for half loads and, in the case of
very small loads and for EASY IRON, only half the amount of detergent
recommended for a full load.

Refer to the detergent/care agent manufacturer's instructions on use
and dosage.

Water softener

For medium to high water hardness (hardness class II upwards), you
should use softener. Refer to the manufacturer's instructions. Then al­ways add the appropriate amount of detergent for hardness class I
(= soft). The responisable water works will provide information on the
local water hardness.

Since the water softener is rinsed in before the main detergent (water

2

pre-softening), 80% of the stated quantity of softener shown on the
package is sufficient.

Water hardness details

Hardness class

I - soft 0 - 7 to 1.3

II - medium hard 7 - 14 1.3 - 2.5

III - hard 14 - 21 2.5 - 3.8

IV - very hard greater than 21 greater than 3.8

Water hardness in °dH

(German hardness scale)

Water hardness in mmol

(millimol per litre)

17

Operating Instructions

Run a Washing Cycle

Brief Instructions

A washing cycle is run in the following steps:

0 1. Set the correct washing program:

– Set the program and temperature with the program selector
– Set any additional program(s)

2. Change the spin speed if necessary / select RINSE HOLD.

3. Set DELAY TIMER if necessary.

4. Open the filling door and fill with washing.

5. Close the filling door.

6. Add washing detergent/care agent.

7. Start the washing program.

After the Washing Program Ends:
Attention! If the washing cycle ended with Rinse Hold, before opening

the filling door carry out PUMP, SPIN or SHORT SPIN.

8. Open the filling door and remove the washing.

9. Switch off the washing machine: Set the program selector to OFF.

18

Operating Instructions

Setting the Washing Program

For the suitable program, the correct temperature and possible addi-

3

tional programs for the particular washing type, refer to the "Program
tables".

0 1. Set the program selector to the

required washing program with
the required temperature.

The probable duration of the set
program in minutes is shown in
the multi display.

2. If necessary, select additional program(s):
The display of the selected auxiliary program
lights up.

– To change the selection, press another button.
– To deselect, press the button again.

19

Operating Instructions

Changing the spin speed/Selecting the rinse
hold function

If required, change the spin speed for the final
spin/select rinse hold:

Changing the spin speed

0 Continue pressing the spin speed/RINSE HOLD but-

ton until the indicator for the desired spin speed is
illuminated.

If you do not change the spin speed, the final spin

3

will be adjusted automatically depending on the
type of wash cycle:

– COTTONS/LINEN 1600 revolutions per minute
– EASY-CARES/EASY IRON 900 revolutions per minute
– DELICATES 700 revolutions per minute
– WOOL/P (Handwash) 900 revolutions per minute

The speed for the intermediate spin cycle is dependent on the wash cy­cle selected and cannot be altered.

Selecting the rinse hold function

0 Continue pressing the spin speed/RINSE HOLD button until the RINSE

HOLD indicator is illuminated.
If RINSE HOLD is selected, the washing will remain in the final rinse wa-

3

ter and will not be spun.
The washing will not be spun throughout the entire wash cycle. As a re­sult the cycle is a very quiet one. RINSE HOLD is therefore especially
suitable for washing at night.
Note: The laundry remains lying in the water until you drain or spin
(see section “Ending a wash cycle”). After 18 hours however, it is auto­matically drained and pumped.

20

Operating Instructions

Set the Delay Timer/Soaking Duration

Delay Timer

The button DELAY TIMER allows the start of a washing program to be
advanced by 1 to a maximum of 19 hours.

0 To do this, press the button DELAY TIMER as

often as necessary until the required start de­lay is shown in the multidisplay, e.g.12h in the
form for a program start delay of 12 hours.
If19h is shown and you press again, 0h and af­terwards the run time of the set washing
program appears (display in minutes, e.g.126).
In this state, the delay timer is not set.

Once the delay timer has been set, it will only be activated after press-

3

ing the START/PAUSE button.

Soaking Duration

With the SOAKING button pressed, you can extend the soaking dura­tion with the button DELAY TIMER (maximum 10 hours and approx.
20 min.).

Without delay timer, the soaking duration is approx. 30 minutes, plus a

3

pre-wash time of approx. 20 minutes.

0 To set, press the button DELAY TIMER as often as necessary until the re-

quired soaking duration is shown in the multidisplay, e.g.1h
(= 1 hour).

After approx. 2 seconds, the multidisplay shows
the run time in minutes.

This run time is comprised as follows:

selected soaking period e.g. – 1h =60 minutes
+ heating up/prewash period e.g. approx. 20 minutes
+ run time of the selected washing program e.g. approx. 126 minutes

=

displayed value e.g. approx. 206 minutes

While SOAKING is running, PRE WASH lights up on the program se-

3

quence display.

21

Operating Instructions

Opening and Closing the Filling Door

0 Open: Pull on the handle of the filling door.
0 Close: Press the filling door firmly closed.

The displays DOOR and START/PAUSE show whether
the door can be opened while the appliance is
switched on:

Display DOOR Display START/PAUSE Opening door possible?

Glows green Flashes red Yes

Glows green Glows red

Is off Flashes or glows red

1) The main door is locked because of a high water level or a high temperature.

If

3

– the display DOOR flashes red

Yes, after pressing button

START/PAUSE

– then the error code E40 flashes in the multidisplay
– and the display MAIN WASH flashes

you tried to start a washing program without first closing the main
door properly. In this case push the door shut firmly and restart the
washing program.

Add the washing

For the maximum filling quantities, see the "Program tables".

3

See "Sort and prepare washing" for information on correctly preparing
the washing.

0 1. Sort and prepare the washing according to type.

2. Open the filling door: Pull on the handle of the filling door.

3. Fill with washing.

Important! When closing the door, make
sure no items of washing get stuck! This
could damage textiles and the unit.

4. Close the filling door securely.

No

1)

22

Operating Instructions

Add Washing Detergent/Care Agent

Refer to the information on washing detergents and care agents, see

3

section ”Washing Detergents and Care Agents”.

0 1. Open the washing detergent drawer:

grip inside the flap on the drawer at
the bottom (1) and pull out the drawer
as far as it will go (2).

2. Fill with washing detergent/
care agent

Compartment for in-wash stain
treatment

Compartment for main washing
powder

(If you use water softener and need the
right compartment for the pre-wash/

soaking agent, add the water softener
to the main washing detergent in the
left compartment.)

Compartment for liquid care agent

(Conditioner, finisher, starch)
Attention! Do not fill the compartment above
the MAX mark. If necessary, dilute viscous agent
up to the MAX mark, and dissolve powder starch.
Note: It is normal for a small amount of water
to be left in the compartment for liquid care agent;
this will not affect the wash results.

Compartment for pre-wash agent/soaking agent

(only for additonal programs PRE WASH and SOAKING

or for water softener

3. Push the drawer fully in.

If using liquid detergent / tablets

3

Add liquid detergent / tablets in the quantity recommended by the
washing detergent manufacturer. Add liquid detergent with dosage
containers provided by the detergent manufacturer.

23

Operating Instructions

Start the Washing Program

0 1. Check that the water valve is open.

2. Start the washing program: Press the button
START/PAUSE. The washing program is started
or it starts after the set time expires.

The filling door is not correctly closed if, when the button START/PAUSE

3

is pressed,

– the indicator DOOR flashes red
– the fault code E40 in the multidisplay flashes
– and the indicator MAIN WASH flashes.

In this case, press the filling door firmly closed and again press the but­ton START/PAUSE.

If the time preselection is set:

A set time preselection runs and the remaining time until the program
start is displayed (in each case in full hours, e.g. 5h). During this time
you can load washing or change/abort the time preselection.

• Load washing: Press the button START/PAUSE. The filling door can be

opened. Next, close the door and again press the button START/

PAUSE.

• Change or abort time preselection: Press the button DELAY TIMER as

often as necessary until the required time is displayed; when the pro­gram run time is displayed (display in minutes, e.g.126), the washing
program starts without delay.

24

Operating Instructions

Completion of the Washing Program

Program sequence display

Before the start, the program steps to be carried out
are indicated by the Program sequence display. The
current program step is displayed during the washing
program.

Multi-display

The expected remaining run time (in minutes) is
displayed in the multi display until the end of the
program.

With automatic program adaptation by the controller of the washing

3

machine, (quantity of washing, type of washing, imbalance recognition,
special rinse etc.) it is possible to stop or correct the counting of the re­maining run time.

25

Operating Instructions

Changing a Washing Program

Changing or aborting a program

0 1. Press button START/PAUSE.

2. Turn programme knob to OFF. The washing program is aborted.

3. If required, set a new washing program. Otherwise turn the programme

knob to PUMP OUT and then press the button START/PAUSE.
The washing program can be interrupted at any time with the button

3

START/PAUSE and continued by pressing the button again. Changing
the washing program is possible only after the programme knob was
turned to OFF.

Select the Additional Program

The additional programs QUICK WASH or STAIN can also be selected af­ter the program start.

0 1. Press the button START/PAUSE.

2. Press the button QUICK WASH or the button STAIN.

3. Press the button START/PAUSE again.

The washing program is continued.

Change the Spin Speed

During the washing program, the spin speed can still be changed or
RINSE HOLD can be set.

0 1. Press the button START/PAUSE.

2. Change the speed with the button Spin/RINSE HOLD.

3. Press the button START/PAUSE again.

The washing program is continued.

26

Operating Instructions

Washing Cycle Ended/Remove Washing

After a washing program has ended, END lights up on the program se­quence display.

If you selected RINSE HOLD, the indicator next to the button START/

PAUSE flashes.

0 1. After a rinse hold, it is first necessary to pump off the water:

– Press either the button START/PAUSE (water is pumped off and the

washing is spun according to the program which has just run; after
pressing the button START/PAUSE again, the spin speed can also still
be changed during spinning),
or

– turn the program selector to OFF and then to PUMP and press the

button START/ PAUSE (water is pumped off without spinning)
or

– turn the program selector to OFF and then to SPIN or SHORT SPIN

and press the button START/ PAUSE (water is pumped off and the
washing is spun or gently spun).

After the end of this program step, the indicator END lights up.

2. Open the filling door.
As soon as the indicator DOOR lights up green, the filling door can be
opened.

3. Remove the washing.

4. Turn the program selector to OFF.

5. After washing, pull out the washing detergent drawer slightly so that it

can dry out. Only lean the door against the washing machine so that
the latter can air out.

If the display OVER DOSING lights up, too much

3

washing detergent was used in the washing program
just ended. During the next wash, pay attention to
the dosing information of the washing detergent
manufacturer and pay attention to the filling quantity!

Attention! If the washing machine is not used for a long time:
Close the water tap and disconnect the washing machine from the
electricity mains. (The Aqua Control water protection does not function
if the power supply is interrupted).

27

Operating Instructions

Program Tables

Washing

Not all possible settings are listed below - only the ones most com­monly used in everyday operation and the most appropriate ones.

Type of Washing,

Care Codes

Cottons

ç

Energy-Saving Program:

Cottons ç

Linen

èë

Easy-Cares

êí

Delicates

ì

Max.

Filling Quantity

(dry weight)

5kg

5kg

5kg

2.5kg

1kg

2.5kg

(or 15-20m

curtains)

Program Selector

1)

2)

COTTONS/LINEN
95

COTTONS/LINEN
ENERGY SAVING

COTTONS/LINEN
30 to 60

EASY-CARES
40 to 60

EASY IRON
40

DELICATES

2

30, 40

Temperature

5)

Possible

Additional

Programs

PRE WASH
SOAKING
QUICK WASH
STAIN

PRE WASH
SOAKING
STAIN

PRE WASH
SOAKING

QUICK WASH

4)

STAIN

PRE WASH
SOAKING
QUICK WASH
STAIN

PRE WASH
SOAKING
QUICK WASH

4)

STAIN

3)

28

Woollens/Handwash

9ìï

1) The load amount inquiry operates in accordance with the EN 60456 standard load.

2) A 10-litre bucket holds approx. 2.5kg of dry washing (cottons).

3) QUICK WASH cannot be selected if washing at 50°C.

4) In the case of the STAINS, a minimum temperature of 40°C is required for the
stain remover to become effective.

5) Only if a filling quantity of 1kg is observed are creases in the washing largely
avoided.
5 to 7 easy-care men's shirts are equivalent to about 1kg of dry washing.

2kg

P

WOOL
COLD to 40

Operating Instructions

Separate Conditioning/Starching/Impregnating

Type of Washing

Cottons/ Linen 5kg STARCHING

Max. Filling Quantity

(dry weight)

Separate Rinse

Type of Washing

Cottons/ Linen 5kg

Easy-Cares 2.5kg

Delicates 2.5kg

Woollens/Handwash 2kg

Max. Filling Quantity

(dry weight)

Separate Spin

Type of Washing

Cottons/ Linen 5kg SPIN

Easy-Cares 2.5kg

Max. Filling Quantity

(dry weight)

Program Selector

Program Selector

GENTLE RINSE

Program Selector

Woollens/Handwash 2kg

SHORT SPINDelicates 2.5kg

29

Operating Instructions

Cleaning and Care

Control panel

Important! Do not use any furniture cleaning agents or aggressive
cleaning agents in order to clean panel and control parts.

0 Wipe control panels with a damp cloth. When doing so, use warm wa-

ter.

Detergent Drawer

The detergent drawer should be cleaned from time to time.

0 1. Pull the detergent drawer out as far as it will go.

2. Remove the detergent drawer by pulling sharply.

3. Take the conditioner insert out of the

middle compartment.

4. Clean the conditioner insert under
running water.

5. Clean the compartments with warm
water from the rear side. It is best to
use a flat brush.

6. Push on the conditioner insert as far as it will go so that it is securely in
place.

30

Operating Instructions

7. Use a brush to clean the entire
rinsing-in section of the washing
machine, particularly also the noz­zles on the top side of the rinsing­in chamber.

8. Set the detergent drawer into the
guide tracks and push in.

Washing Drum

The washing drum is made of stainless steel. Rusting foreign bodies in
the washing can cause rust deposits on the drum.

Important! Do not clean the stainless steel drum with decalcifying
agents containing acids, scouring agents containing chlorine or iron, or
steel wool. Our Customer Service can provide suitable agents.

0 Remove any rust deposits on the drum using a stainless steel cleaning

agent.

Main door

0 Check on a regular basis to see if deposits or foreign objects are present

in or at the rubber sleeve behind the door, and remove.

31

Operating Instructions

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur­ing the warranty period.

• If the fault code E10, E20 or E40 is shown in

the multidisplay, you may be able to remedy
the fault yourself (see Faults Table below).
When you have remedied the fault, press the
START/ PAUSE button.

• With all other displayed faults (E plus number or letter): switch appli-

ance off and on again. Reset the wash programme and press the

START/PAUSE button.
If the fault code is displayed again, please contact the Customer Service
department quoting the fault code.

Problem Possible Cause Remedy

32

The washing machine
does not work.

The filling door cannot
be closed.

Fault code E40 ap­pears. The indicator
MAIN WASH flashes.

The mains plug is not
plugged in.

The fuse of the building's
wiring is not in order.

The filling door is not cor­rectly closed.

The button START/PAUSE
was not pressed for long
enough.

The child safety feature is
set.

The filling door is not
correctly closed.

Plug in the mains plug.

Replace the fuse.

Close the filling door; the
lock must engage audibly.

Press the button START/

PAUSE until the program be-

gins.

Cancel the child safety fea­ture (see section “Child
Safety Feature").

Close the filling door cor­rectly. Restart the program.

Operating Instructions

Problem Possible Cause Remedy

Water tap is closed. Open the water tap.

No water runs in.
Fault code
pears. The indicator

RINSE+ flashes.

The washing machine
vibrates during opera­tion or it is on an une­ven surface.

The washing solution
of the main wash
froths up a lot.

E10 ap-

Filter in screw connection of
the intake hose is blocked.

Water tap is blocked with
limescale or is faulty.

The transport packaging has
not been removed.

The height-adjustable screw
feet are not correctly set.

There is not much washing in
the drum (e.g. only one
dressing gown).

The water could not be com­pletely pumped off before
spinning because the drain­age hose is bent
or
the solution pump is blocked.

Too much detergent was
probably used.

Close the water tap. Unscrew
the hose from the water tap,
remove the filter and clean it
under running water.

Check water tap and have it
repaired if necessary.

Remove transport packaging
according to the installation
and connection instructions.

Adjust in accordance with
the installation and connec­tion instructions.

This does not impair the op­eration of the machine.

Check the laying of the
drainage hose and eliminate
the bend if necessary, or
clean the solution pump and,
if required, remove foreign
bodies from the pump hous­ing.

Meter the detergent exactly
in accordance with the
manufacturer's information.

33

Operating Instructions

Problem Possible Cause Remedy

Water runs out under
the washing machine.

Fault code EF0
appears.

The drain pump for the
washing machine runs
constantly - even when
the appliance is
switched off.

The screw connection on the
intake hose is leaky.

The drainage hose is leaky.

The washing solution pump
cover is not correctly closed.

Washing stuck in the filling
door.

The emergency drain hose is
not properly shut off or it is
not water-tight.

The Aqua Control anti-flood
system has been activated.

Tighten the intake hose
screw connection.

Check the drainage hose and
replace it if necessary.

Close cover correctly.

Stop the program, remove
washing from the filling
door, start a new program.

Shut the emergency drain
hose off properly (see section
"Performing an Emergency
Drain"). Call your after-sales
service if the emergency
drain hose is not water-tight.

Turn off the water tap,
then remove the plug from
the mains and inform
Customer Service.

34

Conditioner not added,
compartment æ for
care agent full of wa­ter.

Washing heavily
creased.

The washing has not
been spun as dry as
usual.

Softener insert in the com­partment for care agent not
correctly attached or is
blocked.

Too mush washing probably
put in.

The washing was not able to
be distributed evenly in the
drum prior to spinning.

Clean the detergent drawer
and firmly attach the sof­tener insert.

Pay attention to the maxi­mum filling quantity (see
Program Tables). For easy­care textiles, select the pro­gram EASY IRON.

Always load the drum as ful
as possible with a combina­tion of large and small items.

Problem Possible Cause Remedy

Drainage hose bent. Remove the bend.

Consult Customer Service.

Washing not well spun.
Residual water still vis­ible in the drum.

Fault code
pears. The indicator
RINSE flashes.

E20 ap-

Maximum pump head (outlet
head 1m from unit's floor
surface) exceeded.

Solution pump blocked.

They can supply a retrofit kit
as a special accessory for de­livery heads of more than
1m.

Switch off the unit and pull
out the mains plug. Clean
the solution pump.

Operating Instructions

The main door cannot
be opened while the
appliance is turned on.

Washing detergent
residues form in the
washing detergent
drawer.

If a siphon is connected: Si­phon blocked.

The main door is locked be­cause of a high water level or
a high temperature. The dis­play DOOR is not lit.

Power failure!
(All displays have gone off.)
For safety reasons the door
remains locked for 4 to
5minutes.

Water tap not fully opened. Open the water tap fully.

Filter in the screw connec­tion of the intake hose on
the water tap or on the unit
is blocked.

Clean the siphon.

Wait until the display DOOR
lights up green.

Should it nevertheless be
necessary to open the main
door:
Turn the programme knob to
OFF; turn the programme
knob to PUMP OUT. Press
button START/PAUSE. The
main door can be opened af­ter the water has been
pumped out.

If water can be seen through
the window in the door, first
carry out emergency empty­ing (see section “Carrying out
Emergency Emptying Opera­tion").
After approx. 4 to 5 minutes
the door can be opened
again by pulling the handle.

Close the water tap. Unscrew
the intake hose from the wa­ter tap and from the unit.
Clean the filter.

35

Operating Instructions

Problem Possible Cause Remedy

The rinsing water is
murky.

The corresponding dis­play does not light up
when one of the addi­tional program but­tons is pressed.

The cause is probably a de­tergent with a high silicate
content.

The selected additional pro­gram cannot be combined
with the set program.

No negative influence on the
rinsing result, use liquid de­tergent if necessary.

Make another selection.

If the washing results are not satisfactory

If the washing has turned grey and if limescale is deposited in the
drum, then

• Too little detergent was used.

• The wrong detergent was used.

• Special soiling was not pre-treated.

• Program or temperature not set correctly.

• If multi-component detergents are used, the individual components

were not used in the correct ratio.

If there are still grey spots on the washing,

• Washing soiled with ointments, grease or oils was washed with too

little detergent.

• Too lower temperature was used for washing.

• A frequent cause is that softener - particularly that in concentrated

form - has reached the washing. Wash out such spots quickly and use

the softener concerned carefully.

36

If at the end of the last rinse foam is still visible

• Modern detergents can also cause foam in the last rinse. However,

the washing is still sufficiently rinsed.

If there are white remnants on the washing

• These are insoluble components of modern detergents. They are not

the result of an insufficient rinsing effect.

Shake or brush out the washing. In future, perhaps you should turn

the washing inside out before washing it. Examine your choice of de-

tergent and if necessary use liquid detergent.

Operating Instructions

Carrying out emergency drainage

• If the washing machine no longer pumps off the washing solution,

emergency drainage must be performed.

• If the washing machine is in a room where there is a risk of frost,

emergency drainage must be performed if there is a possibility of

frost.

In addition: unscrew the inlet hose form the water tap and place it on

the floor. Empty the drainage hose.
Warning! Switch off the washing machine before performing emer-

1

gency drainage and pull out the mains plug.
Caution! The washing solution escaping from the emergency drainage

hose may be hot. There is a risk of scalding! Allow the washing solution
to cool down before performing emergency drainage.

0 1. Place a flat collecting vessel in order to collect the washing solution

which is draining off.

2. Fold open the flap in the right section
of the base outwards and pull it off.

3. Remove the emergency drainage hose
from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency

drainage hose by turning it anticlock­wise and pull it out.

The washing solution runs out. Depend­ing on the amount of solution, it may
be necessary to empty the collecting
vessel several times. To do this, close the
emergency drainage hose temporarily
with the plug.

37

Operating Instructions

When the water is completely drained:

6. Push the plug securely into the emergency drainage hose and turn it

clockwise to secure it.

7. Replace the emergency drainage hose in its holder.

8. Put on the flap and close.

Drain pump

The drain pump is maintenance free. The cover of the drain pump must
only opened in the event of a malfunction when no more water is be­ing pumped out, e.g. if the pump is blocked.
Before loading the machine, please always ensure that there are no for­eign objects left in the pockets or in between the items to be washed.
Paper clips, nails etc. which may find their way into the washing ma­chine along with the washing will remain in the drain pump housing.

To restart the drain pump when it is blocked, please proceed as follows:
Warning! Switch off the washing machine and remove the mains plug

1

before cleaning the drain pump!

0 1. First carry out an emergency emptying procedure (see section “Carrying

out emergency emptying”).

2. Place a cloth on the floor in front of the cover of the drain pump.
Residual water may run out.

3. Unscrew the drain pump cover in an
anti-clockwise direction and pull it out.

4. Remove any foreign objects and fabric
lint from the pump housing.

38

Operating Instructions

5. Replace the pump cover. Laterally insert
the webs on the cover into the guide
slots and screw on the cover in a clock­wise direction.

6. Close the emergency emptying hose and
place it in the holder.

7. Close the flap.

Additional Rinse (RINSE+)

The washing machine is set for extremely economical water consump­tion. However, for persons who suffer from allergies, it can be helpful
to rinse with more water.

If RINSE+ is set, an additional rinse is performed in the case of the

3

programs COTTONS/LINEN, EASY-CARES/EASY IRON and DELICATES.
No additional rinse is set when the unit is delivered.

Set Additional Rinse:

0 1. Turn the program selector to COTTONS/LINEN, EASY-CARES/EASY IRON

or DELICATES with any temperature.

2. Simultaneously keep the button PRE WASH and the button QUICK
WASH pressed for at least 2 seconds. RINSE+ lights up on the program
run indicator. The additional rinse is set. It remains saved until you
cancel it again.

Water consumption is increased due to the additional wash cycle.

3

Cancel Additional Rinse:

0 1. Again turn the program selector to COTTONS/LINEN, EASY-CARES/EASY

IRON or DELICATES.

2. Simultaneously keep the button PRE WASH and the button QUICK
WASH pressed for at least 2 seconds. RINSE+ goes out in the program
run indicator. The additional rinse is cancelled.

39

Operating Instructions

Child Safety Feature

If the child safety feature is set,
the filling door can no longer be
closed and no washing program
can be started.

Setting the child safety feature

0 Use a coin to turn the rotary knob

on the inside of the filling door
clockwise as far as it will go.

Warning! The rotary knob must

1

not be in a vertical position after
adjustment, otherwise the child
safety feature is not active. The ro­tary knob must project as shown in
the diagram

Cancelling the child safety
feature

0 Turn the rotary knob anticlockwise

as far as it will go.

40

Installation and connection instructions

Installation and connection instructions

Installation Safety Precautions

• Do not tilt the washing machine onto its front or onto its right side

(viewed from the front). Electronic components can get wet.

• Check the washing machine for transport damages. A damaged unit

must never be put into operation under any circumstances. In the
event of damage, please contact your supplier.

• Ensure that all parts of the transport safeguard are removed and that

the unit is splash protected, see "Removing transport safeguard".
Otherwise, the units or neighbouring furniture can be damaged when
spinning.

• Always insert the plug into a correctly installed earthed socket.

• In the case of permanent connection: A permanent connection may

only be made by an authorised specialist.

• Before putting the machine into operation, ensure that the mains

voltage and current type shown on the unit's rating plate correspond
with those at the place where the machine is being installed. The fuse
rating is also found on the rating plate.

• Should work be carried out on the water supply installations in order

to allow the machine to be connected properly to the water supply,
this work must be carried out by an authorised installer.

• Should work be carried out on the mains supply in order to allow the

machine to be connected properly to the electricity supply, this work
must be carried out by an authorised electrician.

• The mains lead may only be replaced by the customer service or by an

authorised electrician.

41

Installation and connection instructions

Installation of the appliance

Washing machines with curved panels are not suitable for installing

3

under units.

Transporting the appliance

• Do not place the washing machine on its front or on its right side

(viewed from the front). Otherwise, electrical components can get
wet.

• Never transport the unit without the transport safeguard. Do not re-

move the transport safeguard until the appliance is at the installation
location. Transporting the unit without the transport safeguard can
damage it.

• Lift the appliance neither by an open filling door nor by the base.

When transporting the unit with a sack trolley:

• Attach the sack trolley only at the side. The sack trolley shovel must

not be longer than 24 cm, otherwise the float switch can be de­stroyed.

Remove transport packaging

Important! It is essential to re-

move the transport packaging be­fore putting the appliance into
operation. Keep all parts of the
transport packaging in a safe
place for future use.

0 1. Open both hose holders on the

appliance's rear side and remove
the hoses and mains cable.

42

2. Pull both hose holders off the ap­pliance with a strong pull.

The special spanner (A) and the

3

caps (B) (2 each) and (C) (1 each)
are supplied with it.

3. Remove the screw D, including
the compression spring with the
special spanner A.

4. Cover the hole with the cap C.
Important! When fitting the

plastic caps, press until they snap
into the rear panel securely.

5. Remove the two screws (E) with
the special spanner (A).

6. Remove the 4 screws (F).

7. Remove the transit bar (G).

8. Screw the 4 screws (F) back in for

safe keeping.

9. Close the 2 large holes with the
caps (B).

Important! When fitting the
plastic caps, press until they snap
into the rear panel securely.

Installation and connection instructions

43

Installation and connection instructions

Prepare the installation place

• The installation surface must be clean and dry, free of floor polish

residues and other greasy coatings so that the unit does not slip
away. Do not use lubricants as a sliding aid.

• Installation on a high-veil carpet or floor tiles with soft sponge backs

is not recommended because the standing safety of the appliance is
then no longer ensured.

• By installation surfaces with small-format tiles, lay a conventional

rubber mat underneath.

• Minor unevenness of the floor surface should never be levelled out by

laying pieces of wood, card or similar materials, but rather should al­ways be compensated for by adjusting the screw feet.

• If, for space reasons, it is not possible to avoid setting up the unit di-

rectly next to a gas or coal-fired cooker: install a thermal insulation
panel between the cooker and washing machine (85 x 57cm) which
must have an aluminium film on the side against the cooker.

• The washing machine must not be set up in a room where there is a

danger of frost. Frost hazard!

• Flexible feed and drain tubings may not be crinkled or squeezed.

44

Installation on a concrete base

If the unit is set up on a concrete base,
for safety reasons it is essential to fit
stand plates in which the washing ma­chine is adjusted. The stand plates are
available from Customer Service under
the spare parts number 645 425 058.

Installation on vibrating floors

Where the floor vibrates, particularly in the case of wooden beam
floors with pliable boards, securely screw a water-resistant wooden
panel at least 15mm thick onto at least 2 floor planks. If possible, set up
the unit in the corner of a room, as the wooden floor is optimally re­strained there and is therefore least likely to be subject to resonance vi­brations.

Installation and connection instructions

Compensate for floor unevenness

Automatic adjustment foot: The rear left foot of your washing ma-

3

chine is designed as a spring leg. This means that it guarantees that
your unit will stand securely even at high spin speeds.

If, nevertheless, the washing machine is unstable during spinning,
please proceed as follows:

0 1. Set the three adjusted feet at the

nominal value of 10 mm. To do
this, use the supplied special
spanner to remove the transport
safeguard.

If the automatically adjusting
foot does not reach the floor:

2. Automatic adjustment foot (rear
left) manually for extending the
reqired dimension.

3. If necessary, check the setting
with a spirit level.

Caution! Never use wood, card or
similar underlays to level out minor
floor unevenness. Instead, always adjust
the adjustment foot.

45

Installation and connection instructions

Electrical connection

Details of the mains voltage, current
type and required fuses can be
found on the rating plate. The ra­ting plate is located at the top
above the filling door.

For permanent electrical connection
within the electrical circuit, provi­sions must be made which allow for electrical disconnection of the ap­pliance from the mains with a contact opening of at least 3 mm at all
poles. Suitable devices include circuit breakers, fuses (threaded fuses
must be entirely removed from the socket), ground fault circuit inter­rupters and contactors. Permanent connection may only be carried out
by an authorised electrician.

This appliance complies with the following EC directives:

;

– The "Low Voltage Directive" 72/23/EU with changes
– The "EMC Directive" 89/336/EU with changes

Water connection

The washing machine has safety features which prevent back-contami-

3

nation of the drinking water and which conform to the national regu­lations of the water authorities (e.g. for Germany: DVGW guidelines).
This means that additional protective measures in the installation are
not necessary.

Important!

– Units for connecting to cold water must not be connected to hot wa-

ter.

– Use only new hose sets for the connection.

Permissible water pressure

The water pressure must be at least 1 bar (= 10 N/cm2 = 0.1 Mpa), max­imum 10 bar = 100 N/cm

• If more than 10 bar: Connect a pressure-reduction valve upstream.

• If less than 1 bar: Unscrew the inlet hose on the unit side at the sole-

noid intake valve and remove the flow regulator (to do this, remove
the filter with pointed pliers and take out the rubber washer behind).
Replace the filter.

46

2

= 1 Mpa).

Installation and connection instructions

Water inflow

A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a VDE-approved, complete set
of hoses with fitted hose screw connections offered by our Customer
Service is permissible.
– Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing

machines without Aqua-Control.

– Hose sets in lengths of 2.0 m, 2.9m and 3.9m are available for wash-

ing machines with Aqua-Control.

Caution! Never cut into pieces in order to extend the hoses!

Sealing rings are supplied either in the plastic

3

nuts of the hose screw connection or in the enc­losed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to

the machine.

Caution!

– Do not lay the infeed hose ver-

tically downwards. Instead, turn
it to the right or left as shown
in the diagram.

– Tighten the hose connection

only by hand.

2. Connect the hose with the straight connection
to a water tap with a R 3/4 (inch) screw thread.
Caution! Only tighten the screw connection ma­nually.

3. By slowly opening the water tap before putting
the washing machine into operation, check that
the connection is free of leaks.

47

Installation and connection instructions

Water drain

The drainage hose can either be connected to a siphon or hung in a
wash basin or discharge basin or a bath tub.

Only original hoses may be used for extensions (max. 3m laid on the
floor and then up to 80cm high). Customer Service stocks drainage
hoses in lengths of 2.7 and 4m.

Important! It is essential to lay the drainage hose without kinks.

Water drain-off inside a siphon

The grommet on the hose end fits all
standard siphon types.

0 Secure the connection between the

grommet and siphon with a hose clamp.

Water drain-off inside a basin
Important!

– Small basins are not suitable for

drainage. Water could overflow!

– The end of the drainage hose must not

be submerged in the pumped-out wa­ter. Otherwise, the water could be
sucked back into the unit.

– When hanging in a wash basin or a

bath tub, the drainage hose must be
secured with the supplied attachable
bend to prevent it slipping. The back­surge force of the escaping water
could otherwise force the hose out of
the basin.

0 Tie the bend to the tap or the wall using

a piece of string.

Delivery heads over 1m

To pump off the washing / rinsing solution, every washing machine has
a drain pump which carries liquids up to a height of 1m via the drain­age hose, calculated from the machine's standing surface.

Please contact Customer Service for delivery heads of over 1m.

48

Installation and connection instructions

Technical data

Adjustment possibility Approx. +10 / -5mm
Filling quantity (program-dependent) max. 5kg
Area of use Domestic
Drum speed, spinning See rating plate
Water pressure 1-10 bar (= 10 - 100 N/cm

= 0.1 - 1.0 Mpa)

Dimensions

2

(dimensions in mm)

49

Warranty conditions / Customer service centres

Warranty conditions / Customer service
centres

Weitere Kundendienststellen im Ausland

In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können
dort eingesehen werden.

Further after-sales service agencies overseas

In these countries our AEG agents’ own guarantee conditions are applicable. Please ob­tain further details direct.

Autres agences étrangères assurant le service après-vente

Dans ces pays, les conditions de garantie des concessionnaires de la région sont vala­bles. Vous pouvez les consulter sur place.

Otros puntos de Postventa en el extranjero

En estos países rigen las condiciones de nuestros representantes locales. las cuales
pueden ser consultadas allí mismo.

Ulteriori uffici del servizio tecnico assistenza clienti all’estero

In questi paesi sono valide le condizioni di garanzia dei partner locali. Queste condizioni
possono essere esaminante sul luogo.

Serviços de assistência técnica no estrangeiro

Nestes países são válidas as condições de garantia dos concessionários locais, podendo
aí ser consultadas.

További vevöszolgálati irodák külföldön

Ezekben az országokban a mi AEG vevöszolgálatainknál saját jótállási feltételek alka­lmazhatók. A további adatokat kérjük közvetlenül szerezzék be.

50

U.A.E. Abu Dhabi

Universal Trading Company
P.O. Box 43 99
Tel.: 335331

Egypt

Middle East Commercial
Center
P.O. Box 19
Kairo-Heliopolis
Tel.: [phone]

Jordan

Jordan Household
Supply Co. Ltd.
P.O. Box 3/68
Amman/Tel.: 69 70 50

Kanada

EURO-LINE Appliances
2150 Winston PARK Drive 20
Oakville, Ontario L6H 5V1
Tel.: [phone]
Fax: [phone]

Malta

ITC
International Trading Com­pany
White House Building
Mountbatte Street
Blata L-Bajda/Tel.: 220644

Mauritius

Happy World Centre Ltd.
P.O. 7 54
1 Chausee Street
Port Louis
Tel.: 25355

Warranty conditions / Customer service centres

Australia

ANDI-Co Pty. Ltd
9 Kingston Town Close
Oakleigh VIC 3166
Tel.: [phone]
Fax: [phone]

Bahrain/Arabian Gulf
A.A. Zayani & Sons
P.O. Box 9 32
Bahrain
Tel.: 261060

Bulgaria

Electrolux Bulgaria E.O.O.D.
91 Levski Blvd.
1000 Sofia
Tel.: [phone]
Fax. [phone]

Cyprus

Hadjikyrlakos & Sons Ltd.
Prodromou 121
P.O. Box 21587
Nicosia 1511
Service Telephones:
Nicosia 02 481226
Limassol 05 562182
Larnaca 04 633929
Paphos 06 932 699

Estonia

Electrolux Estonia Ltd.
Mustamäe tee 24
EE0006 Tallinn
Tel.: [phone]
Fax: [phone]

Korea (South)

Core Incorp.
3/F Chewoo Bldg.
200 Nonhyun-Dong
Kangnam-Ku
Seoul
Telefon [phone]

Croatia

Electrolux D.O.O.
Suplova 7
10000 Zagreb
Tel.: [phone]
Fax: [phone]

Kuwait/Arabian Gulf

Ali Al-Ghanim Est.
P.O. Box 10 83
Tel.: [phone]
Fax: [phone]

Lebanon

Adib & Assaferi
P.O. Box 539
Tripoli

Latavia

Electrolux Latavia Ltd.
Terlaton Street 42/44
1011 Riga
Tel.: [phone]
Fax: [phone]

Namibia

AEG NAMIBIA (PTY) LIM­ITED-Jeppe Street
Northern Industrial Area
Windhoek
Tel.: [phone]
Fax: [phone]

New Zealand

Euro-Life New Zealand Ltd.
Privat Bag
58 Symonds Street
Auckland
Tel.: [phone]

Nouvelle Caledonie

Socometra N.C.
B.P. 483
Nouman
Tel.: 275444

Oman

Moshin Haider Darwish
P.O. Box 1 35
Muscat
Tel.: 703743

Poland

Electrolux Poland Sp. zo.o.
ul. Domaniewska 41
02-034 Warszawa
tel.: [phone]
fax: [phone]

Hongkong

Wo Kee Services Ltd.
585-609 Castle Peak Road
Kwai Chung N.T.
Hongkong
Tel.: [phone]

Lthuania

Electrolux Lthuania
Verkui 29
2600 Vilnus
Tel.: [phone]
Fax: [phone]

Russia

Electrolux Russia Ltd.
16 Olympiysky prospekt
129090 Moscow
Tel.: [phone]
Fax: [phone]

51

Warranty conditions / Customer service centres

Israel

Electricity & Electronic
Services-Evis LTD.
19 Hataasia st.
Raanana,
Industrial area 43654
Tel: [phone]
Fax: [phone]
e-mail:[e-mail]

Japan

Electrolux Japan Ltd.
Domestic Appliances Depart­ment
Maruzen Showa Warehouse
Building
Tookai 4-5-12, Ota-ku
143-006 Tokyo
Tel.: [phone]
Fax: [phone]

Thailand

OLYMPIA Thai Ltd.
44 Ratchadapisek Road
10320 Bangkok
Tel.: [phone]
Fax: [phone]

Malaysia

Arzbergh Engineering
No. 49A/B, Jalan Petaling
Utama 7
4600 Petaling Jaya
Tel.: [phone]
Fax: [phone]

Singapore

Arzbergh Engineering
19 Tanglin Road 06-07
Singapore 247909
Tel.: [phone]
Fax: [phone]

Slovakia Rep.

Electrolux Slovakia S.R.O.
Seberiniho 1
821 03 Bratislava
Tel.: [phone], 4355
Fax: [phone]

Saudi Arabia

Alia Trading Corporation
P.O. Box 4101
King Abdul Aziz Street
Riyadh
Tel.: [phone]
Al Nahas Est.
Musaidia Market I
P.O. Box 1 15 29
Jeddah
Tel.: [phone]

Slovenia

Electrolux Slovenia D.O.O.
Traska Ul. 132
1000 Ljubljana
Tel.: [phone]
Fax: [phone]

South Africa

AEG (Pty) Ltd.
55, 12th Road
P.O. Box 1 02 64
Kew/Johannesburg 2000
Tel.: [phone]

52

Hungary

Electrolux Lehel KFT
(AEG Div)
Erzsébet Királyné útja 87.
1142 Budapest
Tel.: [phone]

USA

ANDI Co. Appl. Inc. East
65 Campus Plaza
Edison, New Jersey 0837
USA/Tel.: [phone]

Syria

Masri & Shami
P.O. Box 24 96
Damascus
Tel.: 214080

53

Index

INDEX

A

Aqua Control . . . . . . . . . . . . . . . . . 14, 27, 34

Automatic adjustment foot

. . . . . . . . .10, 45

C

Care agent . . . . . . . . . . . . . . . . 10, 17, 18, 23

Child safety feature
Conditioner
Cottons

. . . . . . . . . . . . . . . . . . .11, 16, 28, 29

Curtains

. . . . . . . . . . . . . . . . . . . . . . . . .15, 28

Customer Service

. . . . . . . . . . . . . . .32, 40

. . . . . . . . . . . . . . .10, 12, 23, 29

. . . . . . . . . .14, 31, 32, 55

D

Delay timer . . . . . . . . . . . . . . .11, 13, 21, 24

Delicates
Detergent
Detergent drawer
Door opening
Drain pump

. . . . . . . . . . . . . . . . . . . . . 12, 16, 28

. . . . . . . . . . . . . . . . . . . . 10, 17, 23

. . . . . . . . . . . . . . . . .10, 23

. . . . . . . . . . . . . . . . . 22, 27, 35

. . . . . . . . . . . . . . . . . . . . . .10, 38

E

Easy iron . . . . . . . . . . . . . . . . . .12, 16, 28, 34

Easy-cares
Emergency drainage
Energy saving

. . . . . . . . . . . . . . . . . . . 12, 16, 28

. . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . .11, 28

F

Filling quantity . . . . . . . . . . . . . . . . . . .14, 28

G

Gentle rinse . . . . . . . . . . . . . . . . . . . . . .12, 29

H

Handwash . . . . . . . . . . . . . . . . . . . 12, 28, 29

I

In-wash stain treatment . . . . . . . . . . .10, 23

L

Linen . . . . . . . . . . . . . . . . . . . . .11, 16, 28, 29

M

Multi-display . . . . . . .11, 21, 24, 25, 32, 55

O

Over-dosed . . . . . . . . . . . . . . . . . . . . . . . . . 27

P

Pre wash . . . . . . . . . . . . . . . . . .13, 19, 23, 28

Pre-wash detergent
Program aborting

. . . . . . . . . . . . . . .10, 23

. . . . . . . . . . . . . . . . . . . . 26

Program changing
Program sequence display
Pump out

. . . . . . . . . . . . . . . . . . . . . . . 12, 27

. . . . . . . . . . . . . . . . . . . .26

. . . . . . . . . . 11, 25

Q

Quick wash . . . . . . . . . . . . . . . 13, 19, 26, 28

R

Rating plate . . . . . . . . . . . . . . . . . .10, 46, 55

Rinse hold
Risk of frost
Run time

. . . . . . . . . . . . . . . . . . . .12, 20, 27

. . . . . . . . . . . . . . . . . . . . . . 6, 37

. . . . . . . . . . . . . . . . . . . . . . . . 21, 25

S

Silk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 16

Soaking

. . . . . . . . . . . . . . .13, 19, 21, 23, 28

Soaking agent
Spin

. . . . . . . . . . . . . . . . . . . . . . . . .12, 26, 29

Spinning
Stain

. . . . . . . . . . .9, 10, 13, 19, 26, 28, 36

Starching

. . . . . . . . . . . . . . . . . . . . . . .23

. . . . . . . . . . . . . . . . . . . . . . . . . . . .20

. . . . . . . . . . . . . . . . . . . . . . . . 12, 29

U

Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

W

Warranty . . . . . . . . . . . . . . . . . . . . . .6, 32, 50

Washing

coloureds
lightly soiled
normally dirty

sensitive
Washing powder
Water

hardness

pump off

softener
Woollens

hand-washable

. . . . . . . . . . . . . . . . . . . . . . . . .15

. . . . . . . . . . . . . . . . . . . . 9, 13

. . . . . . . . . . . . . . . . . . . . . . .9

. . . . . . . . . . . . . . . . . . . . . . . . . .16

. . . . . . . . . . . . . .10, 17, 18

. . . . . . . . . . . . . . . . . . . . . . . 9, 17

. . . . . . . . . . . . . . . . . . . . . . 12, 27

. . . . . . . . . . . . . . . . . 9, 10, 17, 23

. . . . . . . . . . . . . . . . . 12, 16, 28, 29

. . . . . . . . . . . . . . . . . 12, 28

54

Service

In the chapter "What to do if...“ , some faults are listed which you can
remedy yourself. Look there first if a fault occurs. If you do not find any
information there, please consult your Customer Service. (You can find
the addresses and telephone numbers in the section "Customer Service
Centres“.)

Always prepare in advance for the discussion. By doing so you will sim­plify the diagnosis and the decision on whether customer service is
necessary.

Note the PNC number and S. num­ber. You will find both on the rating
plate on the inside of the door of
your washing machine.

PNC .....................................................

S. No. .....................................................

Answer as precisely as possible:

• What form does the fault take?

• Under what circumstances does the fault occur?

• Does the multi display show an error message?

Service

When do you incur costs even during the warranty period?

– If you could have remedied the fault yourself with the aid of the fault

table (see the section "What to do if..."),

– If several journeys by the customer service technician are necessary

because for example he did not receive all the important information
before his visit and must collect spare parts. These multiple trips can
be avoided if you prepare your phone call as described above.

55

From the Electrolux Group. The world´s No.1 choice.

The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.

AEG Hausgeräte GmbH
Postfach 1036
D-90327 Nürnberg

http://www.aeg.hausgeraete.de

© Copyright by AEG

822 942 800-01-220403-06

Subject to change without notice