AEG HKL85410XB Service Manual

EN User Manual 2
Hob
FR Notice d'utilisation 22
Table de cuisson
HKL85410XB
www.aeg.com
2

CONTENTS

1. SAFETY INFORMATION...........................................................................................3
2. SAFETY INSTRUCTIONS.......................................................................................... 4
3. PRODUCT DESCRIPTION........................................................................................ 7
4. DAILY USE..................................................................................................................8
5. HINTS AND TIPS..................................................................................................... 13
6. CARE AND CLEANING.......................................................................................... 15
7. TROUBLESHOOTING.............................................................................................15
8. INSTALLATION....................................................................................................... 18
9. TECHNICAL DATA..................................................................................................20
10. ENERGY EFFICIENCY.......................................................................................... 21
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged 8 years
and above and by persons with reduced capabilities provided that they have been given instruction and/or supervision regarding the safe use of the appliance and understand the potential hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately. Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, this should
be activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
ENGLISH
3
1.2

General Safety

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
Do not operate the appliance by means of an external
timer or separate remote-control system.
WARNING: Unattended cooking on a hob with fat or
oil can be dangerous and may result in fire.
www.aeg.com4
NEVER try to extinguish a fire with water, but switch
off the appliance and then cover flame e.g. with a lid
or a fire blanket.
CAUTION: The cooking process has to be supervised.
A short term cooking process has to be supervised
continuously.
WARNING: Danger of fire: Do not store items on the
cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING: Use only hob guards designed by the
manufacturer of the cooking appliance or indicated by
the manufacturer of the appliance in the instructions
for use as suitable or hob guards incorporated in the
appliance. The use of inappropriate guards can cause
accidents.
2.

SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with the appliance.
• Keep the minimum distance from the other appliances and units.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
• Protect the bottom of the appliance from steam and moisture.
• Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.
• If the appliance is installed above drawers make sure that the space,
ENGLISH
5
between the bottom of the appliance and the upper drawer, is sufficient for air circulation.
• The bottom of the appliance can get hot. Make sure to install a non­combustible separation panel under the appliance to prevent access to the bottom.
• Make sure that the ventilation space of 2 mm, between the worktop and the front of the below unit, is free. The warranty does not cover damages caused by the lack of an adequate ventilation space.

2.2 Electrical Connection

WARNING!
Risk of fire and electrical shock.
• All electrical connections should be made by a qualified electrician.
• The appliance must be earthed.
• Before carrying out any operation make sure that the appliance is disconnected from the power supply.
• Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
• Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
• Use the correct electricity mains cable.
• Do not let the electricity mains cable tangle.
• Make sure that a shock protection is installed.
• Use the strain relief clamp on the cable.
• Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
• The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• If the mains socket is loose, do not connect the mains plug.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

2.3 Use

WARNING!
Risk of injury, burns and electrical shock.
• Remove all the packaging, labelling and protective film (if applicable) before first use.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not blocked.
• Do not let the appliance stay unattended during operation.
• Set the cooking zone to “off” after each use.
• Do not rely on the pan detector.
• Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
• Do not operate the appliance with wet hands or when it has contact with water.
• Do not use the appliance as a work surface or as a storage surface.
• If the surface of the appliance is cracked, disconnect immediately the
6
www.aeg.com
appliance from the power supply. This to prevent an electrical shock.
• Users with a pacemaker must keep a distance of minimum 30 cm from the induction cooking zones when the appliance is in operation.
• When you place food into hot oil, it may splash.
WARNING!
Risk of fire and explosion
• Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
• The vapours that very hot oil releases can cause spontaneous combustion.
• Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
• Do not keep hot cookware on the control panel.
• Do not put a hot pan cover on the glass surface of the hob.
• Do not let cookware to boil dry.
• Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.
• Do not activate the cooking zones with empty cookware or without cookware.
• Do not put aluminium foil on the appliance.
• Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass /
glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.

2.4 Care and cleaning

• Clean regularly the appliance to prevent the deterioration of the surface material.
• Deactivate the appliance and let it cool down before you clean it.
• Disconnect the appliance from the electrical supply before maintenance.
• Do not use water spray and steam to clean the appliance.
• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

2.5 Disposal

WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for information on how to discard the appliance correctly.
• Disconnect the appliance from the mains supply.
• Cut off the mains electrical cable close to the appliance and dispose of it.

2.6 Service

• To repair the appliance contact an Authorised Service Centre.
• Use original spare parts only.

3. PRODUCT DESCRIPTION

1 11
2
1
7 852 43
9
1
12 1011
6

3.1 Cooking surface layout

3.2 Control panel layout

Induction cooking zone
1
Control panel
2
ENGLISH 7
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.
Sensor field
1
2
3
4
- Heat setting display To show the heat setting.
5
- Timer indicators of cooking
6
- Timer display To show the time in minutes.
7
8
Function Comment
ON / OFF To activate and deactivate the hob.
Lock / The Child Safety De­vice
STOP+GO To activate and deactivate the function.
Bridge To activate and deactivate the function.
zones
Hob²Hood To activate and deactivate the manual
To lock / unlock the control panel.
To show for which zone you set the time.
mode of the function.
www.aeg.com8
Sensor field
9
10
11
- Control bar To set a heat setting.
12
Function Comment
- To select the cooking zone.
- To increase or decrease the time.
/
Power function To activate and deactivate the function.

3.3 Heat setting displays

Display Description
The cooking zone is deactivated.
-
+ digit
/ /
The cooking zone operates.
STOP+GO function operates.
Automatic Heat Up function operates.
Power function operates.
There is a malfunction.
OptiHeat Control (3 step Residual heat indicator): continue cooking / keep warm / residual heat.
Lock / The Child Safety Device function operates.

3.4 OptiHeat Control (3 step Residual heat indicator)

WARNING!
/ / There is a risk of burns from residual heat. The indicator shows the level of the residual heat.

4. DAILY USE

WARNING!
Refer to Safety chapters.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware.
4.1 Activating and
min.
max.
deactivating
Touch for 1 second to activate or deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you activate the hob,
• you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel.
• the hob gets too hot (e.g. when a saucepan boils dry). Let the cooking zone cool down before you use the hob again.
• you use incorrect cookware. The symbol comes on and the cooking
zone deactivates automatically after 2 minutes.
• you do not deactivate a cooking zone or change the heat setting. After
some time comes on and the hob deactivates.
The relation between the heat setting and the time after which the hob deactivates:
Heat setting The hob deacti-
vates after
, 1 - 3
4 - 7 5 hours
8 - 9 4 hours
10 - 14 1.5 hour
6 hours

4.3 The heat setting

To set or change the heat setting: Touch the control bar at the correct heat
setting or move your finger along the control bar until you reach the correct heat setting.
ENGLISH 9

4.4 Cooking zone indication

The horizontal line shows the maximum size of the cookware. The break in the horizontal line shows the minimum cookware diameter.
Refer to “Technical information” chapter.

4.5 Bridge function

The function operates when the pot covers the centres of the two zones.
This function connects two left side cooking zones and they operate as one.
First set the heat setting for one of the left side cooking zones.
To activate the function: touch . To set or change the heat setting touch one of the control sensors.
To deactivate the function: touch . The cooking zones operate independently.

4.6 Automatic Heat Up

Activate this function to get a desired heat setting in a shorter time. When it is on, the zone operates on the highest setting in the beginning and then continues to cook at the desired heating setting.
To activate the function the cooking zone must be cold.
10
www.aeg.com
To activate the function for a cooking zone: touch ( comes on).
Immediately touch a desired heat setting. After 3 seconds
comes on.

4.7 Power function

This function makes more power available to the induction cooking zones. The function can be activated for the induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting.
Refer to “Technical information” chapter.
To activate the function for a cooking zone: touch To deactivate the function: change the
heat setting.
. comes on.

4.8 Timer

Count Down Timer
You can use this function to set how long the cooking zone should operate for a single cooking session.
First set the heat setting for the cooking zone then set the function.
To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.
To activate the function: touch of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down.
To see the remaining time: set the cooking zone with . The indicator of
the cooking zone starts to flash quickly. The display shows the remaining time.
To change the time: set the cooking zone with . Touch or . To deactivate the function: set the cooking zone with and touch . The
remaining time counts back to 00. The indicator of the cooking zone goes out.
When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.
To stop the sound: touch . CountUp Timer (The count up timer)
You can use this function to monitor how long the cooking zone operates.
To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.
To activate the function: touch of the timer. comes on. When the
indicator of the cooking zone starts to flash slowly the time counts up. The
display switches between counted time (minutes).
To see how long the cooking zone operates: set the cooking zone with .
The indicator of the cooking zone starts to flash quickly. The display shows how long the zone operates.
To deactivate the function: set the cooking zone with
. The indicator of the cooking zone
goes out.
Minute Minder You can use this function as a Minute Minder when the hob is activated and
the cooking zones do not operate. The heat setting display shows .
To activate the function: touch . Touch
time. When the time comes to an end, the sound operates and 00 flashes.
To stop the sound: touch .
or of the timer to set the
The function has no effect on the operation of the cooking zones.
and
and touch or

4.9 STOP+GO

This function sets all cooking zones that operate to the lowest heat setting.
ENGLISH
11
When the function operates, you cannot change the heat setting.
The function does not stop the timer functions.
To activate the function: touch . comes on.
To deactivate the function: touch . The previous heat setting comes on.

4.10 Lock

You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch . The previous heat setting comes on.
When you deactivate the hob, you also deactivate this function.

4.11 The Child Safety Device

This function prevents an accidental operation of the hob.
To activate the function: activate the hob with . Do not set the heat setting. Touch for 4 seconds. comes on. Deactivate the hob with To deactivate the function: activate the hob with . Do not set the heat setting. Touch for 4 seconds. comes on. Deactivate the hob with
To override the function for only one cooking time: activate the hob with .
comes on. Touch for 4 seconds.
Set the heat setting in 10 seconds. You can operate the hob. When you
deactivate the hob with the function operates again.
.
.

4.12 OffSound Control (Deactivating and activating the sounds)

Deactivate the hob. Touch seconds. The display comes on and goes
out. Touch for 3 seconds. or comes on. Touch of the timer to
choose one of the following:
- the sounds are off
- the sounds are on To confirm your selection wait until the hob deactivates automatically.
When the function is set to you can hear the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
for 3
4.13 Power management
function
• Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration.
• Each phase has a maximum electricity loading of 3700 W.
• The function divides the power between cooking zones connected to the same phase.
• The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W.
• The function decreases the power to the other cooking zones connected to the same phase.
• The heat setting display of the reduced zones changes between two levels.
12
www.aeg.com

4.14 Hob²Hood

It is an advanced automatic function which connects the hob to a special hood. Both the hob and the hood have an infra — red signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan from the hob manually.
For most of the hoods the remote system is originally deactivated. Activate it before you use the function. For more information refer to hood user manual.
Operating the function automatically
To operate the function automatically set the automatic mode to H1 – H6. The hob is originally set to H5. The hood reacts whenever you operate the hob. The hob recognizes temperature of the cookware automatically and adjusts the speed of the fan.
Automatic modes
Auto-
matic light
Mode H0 Off Off Off
Mode H1 On Off Off
Mode H2
Mode H3 On Off Fan
On Fan
3)
Boiling1)Frying
speed 1
2)
Fan speed 1
speed 1
Auto-
matic light
Mode H4 On Fan
Mode H5 On Fan
Mode H6 On Fan
1)
The hob detects the boiling process and acti­vates fan speed in accordance with automatic mode.
2)
The hob detects the frying process and acti­vates fan speed in accordance with automatic mode.
3)
This mode activates the fan and the light and does not rely on the temperature.
Boiling1)Frying
speed 1
speed 1
speed 2
2)
Fan speed 1
Fan speed 2
Fan speed 3
Changing the automatic mode
1.
Deactivate the appliance.
2. Touch
for 3 seconds. The display
comes on and goes off
3.
Touch for 3 seconds.
4. Touch a few times until comes
on.
5. Touch of the Timer to select an
automatic mode.
To operate the hood directly on the hood panel deactivate the automatic mode of the function.
When you finish cooking and deactivate the hob, the hood fan may still operate for a certain period of time. After that time the system deactivates the fan automatically and prevents you from accidental activation of the fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually. To do that touch when the
hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When
ENGLISH
13
you press you raise the fan speed by one. When you reach an intensive level
and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch
.
To activate automatic operation of the function, deactivate the hob and activate it again.

5. HINTS AND TIPS

WARNING!
Refer to Safety chapters.

5.1 Cookware

For induction cooking zones a strong electro-magnetic field creates the heat in the cookware very quickly.
Use the induction cooking zones with correct cookware.
Cookware material
correct: cast iron, steel, enamelled
steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer).
not correct: aluminium, copper,
brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if:
• some water boils very quickly on a zone set to the highest heat setting.
• a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and flat as possible.
Activating the light
You can set the hob to activate the light automatically whenever you activate the hob. To do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2 minutes after deactivating the hob.
the minimum receives only a part of the power generated by the cooking zone.
Refer to “Technical information” chapter.

5.2 The noises during operation

If you can hear:
• crack noise: cookware is made of different materials (sandwich construction).
• whistle sound: you use the cooking zone with high power level and the cookware is made of different materials (sandwich construction).
• humming: you use high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to hob malfunction.

5.3 Öko Timer (Eco Timer)

To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation.
Cookware dimensions
Induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit.
The cooking zone efficiency is related to the diameter of the cookware. The cookware with a smaller diameter than
5.4 Examples of cooking
applications
The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the cooking zone
www.aeg.com14
consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power.
Heat setting Use to: Time
- 1
1 - 3 Hollandaise sauce, melt: but-
1 - 3 Solidify: fluffy omelettes,
3 - 5 Simmer rice and milkbased
5 - 7 Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liq-
7 - 9 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g of
7 - 9 Cook larger quantities of food,
9 - 12 Gentle fry: escalope, veal cor-
12 - 13 Heavy fry, hash browns, loin
14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
Keep cooked food warm. as nec-
ter, chocolate, gelatine.
baked eggs.
dishes, heating up ready­cooked meals.
stews and soups.
don bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.
steaks, steaks.
Boil large quantities of water. Power function is activated.
The data in the table is for guidance only.
Hints
(min)
Put a lid on the cookware.
essary
5 - 25 Mix from time to time.
10 - 40 Cook with a lid on.
25 - 50 Add the minimum twice as
much liquid as rice, mix milk dishes part procedure through.
uid.
potatoes.
60 - 150 Up to 3 l liquid plus ingredi-
ents.
as nec­essary
5 - 15 Turn halfway through.
Turn halfway through.

5.5 Hints and Tips for Hob²Hood function

When you operate the hob with the function:
• Protect the hood panel from direct sunlight.
• Do not spot halogen light on the hood panel.
• Do not cover the hob panel.
• Do not interrupt the signal between the hob and the hood (for example with a hand or a cookware handle).
See the picture. Hood in the picture
is only exemplary.
Loading...
+ 30 hidden pages