For your safety and correct operation
of the appliance, read this manual
carefully before the installation and use.
Always keep these instructions with the
appliance also if you move or sell it.
The users must fully know the operation and safety functions of the appliance.
CHILDREN AND VULNERABLE
PEOPLE SAFETY
Warning! Do not let persons, children
included, with reduced physical
sensory, reduced mental functions or
lack of experience and knowledge to
use the appliance. They must have
supervision or instruction for the
operation of the appliance by a person
who is responsible for their safety.
• Keep all packaging away from children.
There is the risk of suffocation or injury.
• Keep the children away from the appliance during and after the operation, until
the appliance is cold.
Warning! Activate the child safety
device to prevent small children and
pets from an accidental activation of
the appliance.
SAFETY DURING OPERATION
• Remove all packaging, stickers and layers from the appliance before the first
use.
• Set the cooking zones to "off" after each
use.
•The Risk of burns! Do not put cutlery or
saucepan lids on the surface that you
cook, as they can become hot.
Helpful hints and tips 8
Care and cleaning 9
What to do if… 10
Environment concerns 11
Subject to change without notice
Warning!Fire risk! Too hot fats and
oils can occur with ignition very quickly.
CORRECT OPERATION
• Always monitor the appliance during operation.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, easy fusible objects (made
of plastic or aluminium) on or near the
appliance.
• Be careful when you connect the appliance to the near sockets. Do not let the
electricity bonds touch the appliance or
hot cookware. Do not let the electricity
bonds to tangle.
HOW TO PREVENT A DAMAGE TO THE
APPLIANCE
• If the objects or cookware fall on the
glass ceramic, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
cause scratch of the glass ceramic. Do
not move them on the surface.
• Do not let cookware boil dry to prevent
the damage to cookware and glass.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not put the aluminium foil on the appliance.
Warning! If there is a crack on the
surface, disconnect power supply
to prevent the electrical shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down
the serial number (Ser. Nr.) from the
rating plate.The rating plate of the
appliance is on its lower casing.
941 591 754
ELECTROLUX
5,3 kW 400 V50 Hz
240.7Typ
THE SAFETY INSTRUCTIONS
Warning! You must read these!
• Make sure that the appliance is not damaged because of transportation. Do not
connect a damaged appliance. If it is
necessary, speak to the supplier.
• Only an authorized servicing technician
can install, connect or repair this appliance. Use only original spare parts.
• Only use the built-in appliances after you
assemble the appliance into correct builtin units and work surfaces that align to
the standards.
• Do not change the specifications or
change this product. Risk of injury and
damage to the appliance.
• Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules etc.)!
• Keep the minimum distances to other appliances and units!
• Install shock protection, for example install the drawers only with a protective
floor directly below the appliance!
• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
• Seal the appliance to the work top with
no space between with a correct sealant!
• Keep safe the bottom of the appliance
from steam and moisture, e.g. from a
dishwasher or oven!
• Do not install the appliance adjacent to
doors and below windows! If not, when
Prod-nr:
Serie
GK65TSF
electrolux 3
you open the doors or windows they can
push off hot cookware from the appliance.
Warning! Risk of injury from electrical
current. Carefully obey the instructions
for electrical connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket
connections can make the terminal become too hot.
• A qualified electrician must install the
connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type
H05BB-F Tmax 90°C (or higher) for a single phase or two phase connection.
• Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C;
or higher). Speak to your local Service
Centre.
The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a
contact opening width of minimum 3 mm.
You must have correct devices to isolate:
line protecting cut-outs, fuses (screw type
fuses removed from the holder), earth leakage trips and contactors.
TO ATTACH THE SEAL.
• Clean the worktop in the area of the cut
out section.
• Bond the seal stripe supplied on the lower edge of the appliance along the outer
edge of the glass ceramic. Do not extend
it. Let stay the cut ends in the middle of
one side. When, you cut it to length (add
some mm), push the two ends together.
4 electrolux
ASSEMBLY
min.
50mm
min.
500mm
min.
50mm
R 5mm
600mm
=
500
+1
mm
=
540
min.
20 mm
+1
mm
min.
25 mm
min.
28 mm
PRODUCT DESCRIPTION
GENERAL OVERVIEW
12
145 mm
Cooking zone 1200 W
170/210 mm
120/180 mm
34
CONTROL PANEL LAYOUT
12354678
1
Cooking zone 1400/2300 W
2
Control panel
3
Cooking zone 900/1800 W
4
electrolux 5
1091112
Use the sensor fields to operate the appliance. The displays, indicators and
sounds tell which functions operate.
sensor fieldfunction
1
2
3
4
Cooking zones' indicators of timerIt shows for which zone you set the time.
5
The timer displayIt shows the time in minutes.
6
A heat setting displayIt shows the heat setting.
7
8
A control barIt sets the heat setting.
9
10
11
/
It activates and deactivates the appliance.
It locks/unlocks the control panel.
It activates and deactivates the STOP+GO function.
OptiHeat Control shows the level of the residual heat.
Warning! / / The risk of
burns from residual heat!
OPERATING INSTRUCTIONS
ACTIVATION AND DEACTIVATION
Touch
for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
•
All cooking zones are deactivated (
• You do not set the heat setting after you
activate the appliance.
The times of Automatic Switch Off
The heat setting
The cooking
zone deacti-
vates after
, - - - -
6 hours5 hours4 hours1.5 hours
THE HEAT SETTING
• You spill something or put something on
the control panel for more than 10 seconds, (a pan, a cloth, etc.). The sound
operates some time and the appliance
deactivates. Remove the object or clean
the control panel.
• You do not deactivate a cooking zone or
).
change the heat setting. After some time,
comes on and the appliance deacti-
vates. See the table.
sary. Do not release before you have a correct heat setting. The display shows the
heat setting.
Touch the control bar at the heat setting.
Change to the left or the right, if it is neces-
ACTIVATION AND DEACTIVATION OF
THE OUTER RING
You can adjust the surface you cook to the
dimension of the cookware.
To activate the outer ring touch the sensor
. The indicator comes on.
field
00
electrolux 7
Do the procedure again to deactivate the
outer ring. The indicator goes out.
AUTOMATIC HEAT UP
12
11
10
9
8
7
6
5
4
3
2
1
0
1234567891011121314
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see the
illustration), and then decreases to the necessary heat setting.
To start the Automatic Heat Up function for
a cooking zone:
1.
Touch
( comes on in the display).
2. Immediately touch the necessary heat
setting. After 3 seconds
comes on
in the display.
To stop the function change the heat setting.
TIMER
Count Down Timer
Use the Count Down Timer to set how long
the cooking zone operates for only this one
time.
Set the Count Down Timer after the selection of the cooking zone.
You can set the heat setting before or after
you set the timer.
•
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the Count Down Timer:
•
touch
of the timer to set the time (
00
- 99 minutes). When the indicator of the
cooking zone start to flash slow, the time
counts down.
• To see the remaining time: set the
cooking zone with
. The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer: set
the cooking zone with
. Touch or
.
• To deactivate the timer: set the cook-
ing zone with
maining time counts back to
. Touch . The re-
. The in-
00
dicator of the cooking zone goes out. To
deactivate you can also touch
and
at the same time.
When the countdown comes to an end,
the sound operates and
flashes. The
00
cooking zone deactivates.
•
To stop the sound: touch
CountUp Timer ( The count up timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more than1 cooking zone operate ) : touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the CountUp Timer: touch
of the timer comes on. When the
indicator of the cooking zone starts to
flash slow, the time counts up. The dis-
play switches between
and counted
time (minutes).
• To see how long the cooking zoneoperates: set the cooking zone with
The indicator of the cooking zone starts
to flash quickly. The display shows the
time that the cooking zone operates.
• To deactivate the CountUp Timer: set
the cooking zone with
and touch
or to deactivate the timer. The indicator of the cooking zone goes out.
Minute Minder
You can use the timer as a Minute Minder
while the cooking zones do not operate.
Touch
. Touch or of the timer to
set the time. When the time comes to an
end, the sound operates and
•
To stop the sound: touch
flashes.
.
8 electrolux
STOP+GO
function sets all cooking zones that
The
operate to the lowest heat setting.
When
heat setting.
The
function.
•
•
LOCK
When the cooking zones operate, you can
lock the control panel, but not
vents an accidental change of the heat setting.
First set the heat settings.
To activate this function touch
cator comes on.
The Timer stays on.
To deactivate this function touch
indicator goes out.
When you deactivate the appliance, you also deactivate this function.
THE CHILD SAFETY DEVICE
This function prevents an accidental operation of the appliance.
To activate the child safety device
•
•
•
To deactivate the child safety device
•
operates, you cannot change the
function does not stop the timer
To activate this function touch
indicator comes on.
To deactivate this function touch
The heat setting that you set before
comes on.
. It pre-
. The indi-
Activate the appliance with
set the heat settings.
Touch
comes on.
Deactivate the appliance with
Activate the appliance with
set the heat settings. Touch
seconds. The indicator goes out.
for 4 seconds. The indicator
. Do not
.
. Do not
. The
.
. The
for 4
•
Deactivate the appliance with
To override the child safety device for
only one cooking time
•
Activate the appliance with
cator comes on.
•
Touch
setting in 10 seconds. You can operate
the appliance.
• When you deactivate the appliance with
again.
OFFSOUND CONTROL (DEACTIVATION
AND ACTIVATION OF THE SOUNDS)
Deactivation of the sounds
Deactivate the appliance.
Touch
on and go out. Touch
comes on, the sound is on. Touch ,
comes on, the sound is off.
When this function operates, you can hear
the sounds only when:
•
you touch
• the Minute Minder comes down
• the Count Down Timer comes down
• you put something on the control panel.
Activation of the sounds
Deactivate the appliance.
Touch
on and go out. Touch
comes on, because the sound is off. Touch
, comes on. The sound is on.
for 4 seconds. Set the heat
, the child safety device operates
for 3 seconds. The displays come
for 3 seconds.
for 3 seconds. The displays come
for 3 seconds.
.
. The indi-
HELPFUL HINTS AND TIPS
COOKWARE
• The bottom of the cookware must
be as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bottoms can cause the color change on
the glass-ceramic surface.
ENERGY SAVING
• If it is possible, always put the lids on
the cookware.
•Put cookware on a cooking zone before you start it.
• Stop the cooking zones before the
end of the cooking time to use residual heat.
electrolux 9
• The bottom of pans and cooking
zones must have the same dimension.
ÖKO TIMER (ECO TIMER)
To save the energy, the heater of the
cooking zone deactivates before the
in the operation time is depends of the
heat setting level and the time you
cook.
THE EXAMPLES OF COOKING
APPLICATIONS
The data in the table is for guidance only.
count down timer signal. The difference
Heat
setting
Keep cooked foods warmas nec-
1
1-3Hollandaise sauce, melt: butter, choco-
1-3Solidify: fluffy omelettes, baked eggs10-40
3-5Simmer rice and milkbased dishes,
5-7Steam vegetables, fish, meat20-45
7-9Steam potatoes20-60
7-9Cook larger quantities of food, stews
9-12Gentle fry: escalope, veal cordon bleu,
12-13Heavy fry, hash browns, loin steaks,
14Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips.
Information on acrylamides
Important! According to the newest
scientific knowledge, if you brown food
(specially the one which contains starch),
Use to:TimeHints
essary
5-25
min
min
25-50
min
min
min
60-150
min
as necessary
5-15
min
Put a lid on a cookware.
Mix from time to time.
Cook with a lid on.
Add the minimum two times as
much liquid as rice, mix milk dishes
at some point of the procedure
through.
Add some tablespoons of liquid.
Use max. ¼ l water for 750 g of potatoes.
Up to 3 l liquid plus ingredients.
Turn halfway through.
Turn halfway through.
acrylamides can pose a health risk. Thus,
we recommend that you cook at the lowest
temperatures and do not brown food too
much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! The sharp objects and
abrasive cleaning agents can cause
damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.
Scratches or dark stains on the glassceramic cause no effect on how the
appliance operates.
10 electrolux
To remove the dirt:
1. – Remove immediately: melted plas-
tic, plastic foil, and food with sugar. If
not, the dirt can cause damage to
the appliance. Use a special scraper
for the glass . Put the scraper on the
glass surface at an acute angle and
move the blade on the surface .
Remove after the appliance is
–
water rings, fat stains, shiny metallic
discolorations. Use a special cleaning
agent for glass ceramic or stainless
steel.
2. Clean the appliance with a moist cloth
and some detergent.
3. At the end rub the appliance dry
with a clean cloth.
sufficiently cool: limescale rings ,
WHAT TO DO IF…
ProblemPossible cause and remedy
You cannot activate the appliance or operate it.
A Sound operates and the appliance deactivates.
A sound operates when the appliance is deactivated.
The appliance deactivates.
The residual heat indicator
does not comes on.
The Automatic Heat Up function does not operate.
You cannot activate the outer
ring.
The sensor fields become hot.The cookware is too large or you out it too near to the controls.
There is no signal when you
touch the panel sensor fields.
comes on
and number comes on.
If you tried the above solutions and cannot
repair the problem, speak to your dealer or
the customer service. Give the data from
the rating plate, three digit letter code for
the glass ceramic (it is in the corner of the
• Activate the appliance again and set the heat setting in 10 seconds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock or Stop+Go operates. See
the chapter Operating instructions.
• There is water or fat stains on the control panel. Clean the control panel.
You put something on one or more sensor fields. Remove the object from the sensor fields.
You put something on the . Remove the object from the sensor field.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service centre.
• There is still residual heat on the cooking zone. Let the cooking
zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the
same power as the Automatic Heat Up function.
Activate the inner ring first.
Put large cookware on the rear cooking zones if it is necessary.
The signals are deactivated. Activate the signals (see OffSound
Control).
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
tre.
comes on again, speak to the service cen-
glass surface) and an error message that
comes on.
Make sure, you operated the appliance correctly. If not the servicing by a customer
service technician or dealer will not be free
electrolux 11
of charge, also during the warranty period.
The instructions about the customer service
ENVIRONMENT CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
and conditions of guarantee are in the guarantee booklet.
contact your local council, your household
waste disposal service or the shop where
you purchased the product.
PACKAGING MATERIAL
The packaging materials are friendly to
the environment and can be recycled.
The plastic components are identified
by marking: >PE<,>PS<, etc. Discard
the packaging materials as household
waste at the waste disposal facilities in
your municipality.
www.electrolux.com/shop
892947803-A-362011
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.