2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information 2
Installation 3
Description of the appliance 5
Operating the appliance 5
Subject to change without notice
Helpful hints and tips 5
Care and cleaning 6
What to do if... 6
Environment concerns 6
Safety information
For your safety and correct operation of
the appliance, read this manual carefully
before installation and use. Always keep
these instructions with the appliance
even if you move or sell it. Users must
fully know the operation and safety features of the appliance.
General safety
Warning! Persons (including children)
with reduced physical sensory, mental
capabilities or lack of experience and
knowledge must not use the appliance.
They must have supervision or
instruction for the operation of the
appliance by a person responsible for
their safety.
Child safety
• Only adults can use this appliance. Children must get supervision to make sure
that they do not play with the appliance.
• Keep all packaging away from children.
There is a risk of suffocation.
• Keep children away from the appliance
when it is on.
Warning! Start the child safety device to
prevent small children and pets from an
accidental activation of the appliance.
Safety during operation
• Remove all packaging, stickers and layers
from the appliance before the first use.
• Set the cooking zones to "off" after each
use.
• Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they
can become hot.
Warning! Fire danger! Overheated fats
and oils can ignite very quickly.
Correct operation
• Always monitor the appliance during operation.
• Only use the appliance for domestic cooking tasks!
• Do not use the appliance as a work or a
storage surface.
• Do not put or keep very flammable liquids
and materials, or fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let electricity bonds touch the appliance or hot
cookware. Do not let electricity bonds tangle.
How to prevent a damage to the
appliance
• If the objects or cookware fall on the glass
ceramic, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can
scratch the glass ceramic if you move
them on the surface.
• Do not let cookware boil dry to prevent the
damage to cookware and glass ceramics.
• Do not use the cooking zones with empty
cookware or without cookware.
• Do not cover any part of the appliance with
aluminium foil.
Warning! If there is a crack on the
surface, disconnect power supply to
prevent the electric shock.
Installation
Before the installation , note down
this data from the rating plate:
• Model description (Modell)................
• Product number (Prod.
Nr.) ............. ....
• Serial number (Ser. Nr.) ...............
You find the rating plate of the appliance on its lower casing.
Prod-nr:
ELECTROLUX
7,1 kW 400 V 50 Hz
55 AAD 30 XOTyp
Safety instructions
Warning! You must read these!
Fully obey the laws, ordinances, directives and standards in force in the country where you use the appliance (safety
regulations, recycling regulations, electrical safety rules etc.)!
Only a qualified electrician must install
the appliance!
Keep the minimum distances to other
appliances and units!
Install anti-shock protection, for example install the drawers only with a protective floor directly below the appliance!
Protect the cut surfaces of the worktop
against moisture with a correct sealant!
Seal the appliance to the work top with
no space left with a correct sealant!
Assembly
941 591 594
Serie
GK56PPLCN
electrolux 3
Protect the bottom of the appliance from
steam and moisture, e.g. from a dishwasher or oven!
Do not install the appliance adjacent to
doors and below windows! If not, hot
cookware can be hit off the hob when
you open doors or windows.
Warning! Risk of injury from electrical
current.
The combination appliance is live.
• Observe electrical safety rules.
• Rated voltage of the combined appliances
must match.
• Fit plug and socket connections together
properly.
• Install correctly to give anti-shock protection.
• Loose and incorrect plug and socket connections can make the terminal become
too hot.
• A qualified electrician must install the
clamping connections correctly.
The appliance must have the electrical installation which lets you disconnect the appliance from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
min.
50 mm
min. 500 mm
min.
50 mm
R 5mm
600mm
=
500
+1
mm
=
540
+1
mm