AEG FSK63700P User Manual

FSK63700P
USER MANUAL
EN User Manual
Dishwasher
www.aeg.com2

CONTENTS

1. SAFETY INFORMATION............................................................................................. 2
2. SAFETY INSTRUCTIONS.............................................................................................4
4. CONTROL PANEL....................................................................................................... 7
5. PROGRAMMES............................................................................................................7
6. SETTINGS.....................................................................................................................9
7. OPTIONS....................................................................................................................12
8. BEFORE FIRST USE................................................................................................... 13
9. DAILY USE.................................................................................................................. 14
10. HINTS AND TIPS..................................................................................................... 16
11. CARE AND CLEANING.......................................................................................... 17
12. TROUBLESHOOTING.............................................................................................20
13. PRODUCT INFORMATION SHEET .......................................................................23
14. ADDITIONAL TECHNICAL INFORMATION.........................................................24
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.
1.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The
ENGLISH 3
manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.

1.2 General Safety

This appliance is intended to be used in household
and similar applications such as:
farm houses; staff kitchen areas in shops, offices
and other working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
Obey the maximum number of 15 place settings.
www.aeg.com4
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the built-in structure due to safety manner.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not install or use the appliance where the temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that meets installation requirements.

2.2 Electrical connection

WARNING!
Risk of fire and electric shock.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
ENGLISH 5
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance complies with the E.E.C. Directives.
• This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only).

2.3 Water connection

• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the appliance.
• The water inlet hose has a safety valve and a sheath with an inner mains cable.
disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose.

2.4 Use

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
• Do not sit or stand on the open door of the appliance.
• The appliance can release hot steam if you open the door while a programme operates.

2.5 Service

• To repair the appliance contact the Authorised Service Centre.
• Use original spare parts only.
WARNING!
Dangerous voltage.
• If the water inlet hose is damaged, immediately close the water tap and

2.6 Disposal

WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
5
4
10
9
67
11
12
2
3
1
8
www.aeg.com6

3. PRODUCT DESCRIPTION

Top spray arm
1
Upper spray arm
2
Lower spray arm
3
Filters
4
Rating plate
5
Salt container
6
Air vent
7

3.1 Beam-on-Floor

The Beam-on-Floor is a light that is displayed on the floor below the appliance door.
• When the programme starts, a red light comes on and stays on for the duration of the programme.
• When the programme is completed, a green light comes on.
• When the appliance has a malfunction, the red light flashes.
Rinse aid dispenser
8
Detergent dispenser
9
Lower basket
10
Upper basket
11
Cutlery drawer
12
The Beam-on-Floor is off when the appliance is deactivated.
When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To see if the cycle has ended, check the control panel.

4. CONTROL PANEL

1
2
3 4 5 6 7 8
9
ENGLISH 7
On/off button
1
Display
2
Delay button
3
Program button
4
ExtraHygiene button
5

4.1 Indicators

Indicator Description
Salt indicator. It is on when the salt container needs refilling.
Rinse aid indicator. It is on when the rinse aid dispenser needs refilling.
End indicator. It is on when the programme is completed.

5. PROGRAMMES

The numbering of the programmes in the table (P1, P2, etc.) reflects their sequence on the control panel.
Programme Degree of soil
Type of load
P1
1)
P2
2)
P3
3)
• Normal soil
• Crockery and
• All
• Crockery, cut-
• Heavy soil
• Crockery, cut-
cutlery
lery, pots and pans
lery, pots and pans
TimeSaver button
6
XtraDry button
7
RESET button
8
Indicators
9
The order of the programmes in the table may not reflect their sequence on the control panel.
Programme phases Options
• Prewash
• Wash 50 °C
• Rinses
• Dry
• Prewash
• Wash from 45 °C to 70 °C
• Rinses
• Dry
• Prewash
• Wash 70 °C
• Rinses
• Dry
• ExtraHygiene
• XtraDry
• ExtraHygiene
• XtraDry
• ExtraHygiene
• TimeSaver
• XtraDry
www.aeg.com8
Programme Degree of soil
Programme phases Options
Type of load
P5
• Normal or light
4)
soil
• Delicate crock-
• Wash 45 °C
• Rinses
• Dry
• XtraDry
ery and glass­ware
P4
5)
• Fresh soil
• Crockery and
• Wash 60 °C
• Rinses
• ExtraHygiene
• XtraDry
cutlery
P6
• Normal soil
• Crockery and
6)
cutlery
• Prewash
• Wash 50 °C
• Rinses
• XtraDry
• Dry
1)
This programme offers the most efficient use of water and energy consumption for crockery and cut-
lery with normal soil. This is the standard programme for test institutes.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad-
justs the temperature and quantity of water as well as the wash duration.
3)
This programme is designed to wash heavily soiled items with high water pressure and at a high tem-
perature.
4)
This programme controls the temperature of the water to provide special care for delicate items,
glassware in particular.
5)
This programme is suitable for washing a load or a half load with fresh or light soil in a short time.
6)
This is the most silent programme. The wash pump works at a very low speed to reduce the noise
generated by the appliance. Due to the low speed, the programme duration is long.

5.1 Consumption values

Programme
P1
P2
P3
P5
P4
1)
Water
12.5 - 14.5 1.4 - 1.7 170 - 190
12 - 14 0.8 - 1.0 82 - 92
Energy
(l)
(kWh)
Duration
(min)
11 0.846 235
8 - 15 0.7 - 1.7 46 - 170
10 0.9 30
ENGLISH 9
Programme
P6
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.

5.2 Information for test institutes

To receive the necessary information for conducting performance tests (e.g. according to EN60436), send an email to:
info.test@dishwasher-production.com

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme selection mode it is possible to set a programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according to the water hardness.
• Activation or deactivation of the rinse aid empty notification.
• The level of rinse aid according to the required dosage.
• Activation or deactivation of the acoustic signal for the end of a programme.
• Activation or deactivation of the AirDry.
As the appliance stores the saved settings, there is no need to configure it before every cycle.

How to set the programme selection mode

The appliance is in programme selection mode when the display shows the programme number P1.
After activation, the appliance is in programme selection mode by default. If not, set the programme selection mode the following way:
1)
Water
(l)
12 - 13 1.1 - 1.3 230 - 250
Energy
(kWh)
In your request please include the product number code (PNC) found on the rating plate.
For any other questions regarding your dishwasher please refer to the service book provided with your appliance.
Press and hold RESET until the appliance is in programme selection mode.
Duration
(min)

How to enter user mode

Make sure the appliance is in programme selection mode.
To enter the user mode, press and hold
simultaneously and until the
indicators and the display is blank.
, , , and flash

6.2 The water softener

The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance.
The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.
The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results.
Loading...
+ 19 hidden pages