AEG F65488VI-S, F89088VI-S-2 Installation guide

DISHWASHER CONNECTION
INSTALL
15MAR2016
TABLE OF CONTENTS
AEG Dishwashers Unit Dimensions & Electrical Requirements
F89088VI-M-1
24” Stainless Steel Door - Fied
F89088VI-S-1 24” Fully Integrated Dishwasher
P&C Dishwashers Unit Dimensions & Electrical Requirements
DW18PCFI 24” Compact Dishwasher
DWTPC5FCSS 24” Dishwasher
DWTPC10SS 24” Stainless Steel Dishwasher
DWTPC10FI 24” Fully Integrated Dishwasher
DW4SS/FI 24” Compact Dishwasher
................................................ 1.
................................................ 2.
................................................ 3.
................................................ 4.
................................................ 6.
................................................ 7.
................................................ 8.
................................................ 9.
................................................ 10.
................................................ 11.
Connecon Placements Hose, Electrical, & Drain
Appliance Guarantee & Warranty
................................................ 13.
................................................ 17.
UNIT DIMENSIONS
MODEL HEIGHT WIDTH DEPTH
F89088VI-M-1
F89088VI-S-1
F65478VI-S
86cm - 91cm 33
7/8
” - 35
13/16
86cm - 91cm 33
7/8
” - 35
13/16
82cm - 87cm 32
1/4
” - 34
1/4
59.7cm - 59.9cm
1/2
23
” - 23
59.7cm - 59.9cm
1/2
23
” - 23
44.7cm - 44.9cm 17
5/8
” - 17
9/16
9/16
11/16
ELECTRICAL REQUIREMENTS
57cm
7/16
22
55cm
5/8
21 55cm
5/8
21
MODEL VOLTAGE FREQUENCY RECEPTACLE
WAT TAGE
REQUIRED
F89088VI-M-1 115v 60hz 15AMPS 1300W
F89088VI-S-1 115v 60hz 15AMPS 1300W
F65478VI-S 115v 60hz 15AMPS 1300W
Pg. 1
F65478VI-S
18” Fully Integrated
1/16
” - 35
1/4
34
870mm 890mm
610mm
9/16
17
453mm
24”
*Install custom door panel 47mm above dishwasher door.
1/2
17
444mm
7/8
1
47mm
1/4
” - 34
5/16
32
820mm - 870mm
1/2
4
max. 115mm
15/16
29
760mm
22
572mm - 580mm
1/2
17
444mm
Panel Dimensions / Weight
Applied Panel Width: 17 Panel Height: Max 29
1/2
” / 444 cm
15/16
” / Max. 760 cm
Custom Panel Weight MUST NOT EXCEED 7KG
15/16
29
760mm
1/8
” - 6
1/8
4
105mm - 155mm
9/16
13/16
” - 22
Pg. 2
F89088VI-M-1
24” Stainless Steel Door - Fied
13/16
” - 35
1/16
34
860mm - 910mm
610mm
5/8
23
600mm
24”
5/8
23
600mm
13/16
7/8
” - 35
33
860mm - 910mm
Pg. 3
24”
610mm
9/16
23
598mm
F89088VI-S-1
24” Fully Integrated
13/16
” - 35
1/16
34
865mm - 910mm
600mm
610mm
5/8
23
24”
11/16
20
525mm
13/16
7/8
” - 35
33
860mm - 910mm
9/16
23
598mm
Panel Dimensions / Weight
Applied Panel Width: 23 Panel Height: Max 29
9/16
” / 598 cm
15/16
” / Max. 760 cm
Custom Panel Weight MUST NOT EXCEED 8KG
24”
610mm
15/16
29
760mm
9/16
23
598mm
Pg. 4
Pg. 5
UNIT DIMENSIONS
MODEL HEIGHT WIDTH DEPTH
DW18PCFI
DWTPC10FI/SS
DWTPC5FCSS
DW4SS/FI
82cm - 87cm 32
1/4
” - 34
1/4
86cm - 91cm
33
7/8
” - 35
13/16
82cm - 87cm 32
1/4
” - 34
1/4
43.8cm
1/4
17
44.7cm-44.9cm 17
59.7cm-59.9cm
23
59.7cm-59.9cm 23
5/8
”-17
1/2
”- 23
1/2
”- 23
55cm 23
5/8
11/16
9/16
9/16
ELECTRICAL REQUIREMENTS
55cm
5/8
21 55cm
5/8
21 55cm
5/8
21 50cm
11/16
19
MODEL VOLTAGE FREQUENCY RECEPTACLE
WAT TAGE
REQUIRED
DW18PCFI 115v 60hz 15AMPS 1300W
DWTPC5FCSS 115v 60hz 15AMPS 1300W
DWTPC10FI/SS 115v 60hz 15AMPS 1300W
DW4SS/FI 115v 60hz 15AMPS 1280W
Pg. 6
DW18PCFI
18” Fully Integrated Dishwasher
*Install custom door panel 47mm above dishwasher door.
1/16
1/4
” - 35
34
870mm 890mm
610mm
9/16
17
453mm
24”
7/8
1
1/4
” - 34
5/16
32
820mm - 870mm
1/2
4
max. 115mm
47mm
17
444mm
1/2
15/16
29
760mm
Pg. 7
15/16
29
760mm
1/8
” - 6
1/8
4
105mm - 155mm
1/2
17
444mm
9/16
13/16
22
” - 22
572mm - 580mm
Panel Dimensions / Weight
Applied Panel Width: 17 Panel Height: Max 29
1/2
” / 444 cm
15/16
” / Max. 760 cm
Custom Panel Weight MUST NOT EXCEED 7KG
DWTPC5FCSS
24” Dishwasher
1/2
” - 34
1/2
32
825mm - 875mm
610mm
5/8
23
600mm
24”
1/4
1/4
” - 34
32
820mm - 870mm
13/16
22
580mm
9/16
23
598mm
Pg. 8
DWTPC10SS
24” Stainless Steel Dishwasher
13/16
” - 35
1/16
34
865mm - 910mm
610mm
5/8
23
600mm
24”
11/16
20
525mm
13/16
” - 35
7/8
33
860mm - 910mm
Pg. 9
9/16
23
598mm
24”
610mm
15/16
29
760mm
9/16
23
598mm
Panel Dimensions / Weight
Applied Panel Width: 23 Panel Height: Max 29
9/16
” / 598 cm
15/16
” / Max. 760 cm
Custom Panel Weight MUST NOT EXCEED 8KG
DWTPC10FI
24” Fully Integrated Dishwasher
13/16
” - 35
1/16
34
860mm - 910mm
610mm
5/8
23
600mm
24”
5/8
23
600mm
13/16
7/8
” - 35
33
860mm - 910mm
24”
610mm
9/16
23
598mm
Pg. 10
DW4SS/FI
24” Compact Dishwasher
7/16
2
62mm
1/4
17
438mm
29/32
10
11/16
19
500mm
15/16
11/16
18
*475mm
277mm
9/16”
*15mm
1/4
23
11/16”
*18mm
5/8
21
550mm
*590mm
15
*405mm
1/2
2
*63mm
Pg. 11
7/16
36
925mm
31
800mm
1/2
Pg. 12
CONNECTION PLACEMENTS
* Connecons must never be placed behind the appliance. * Make sure the hoses and power supply cord are not bent or crushed.
RECOMMENDED CONNECTION PLACEMENTS & DISTANCES
* Refer to g 1. & Fig2. for detailed outlet hose connecon.
Refer to g 1&2
47”
1200mm
Cold Water Inlet Hose
59”
1500mm
Outlet Hose
63”
1600mm
min. 16” 400mm
* If connecons are located in an adjacent space/cabinet, a through hole with a minimum of 8cm x 8cm ( 3 1/8” x 3 1/8”) is needed.
Pg. 13
g 1. Connecng the drain hose with a hard plasc end
1.
2.
3. 4.
1. Dishwasher drain hose
2. Squeeze clamp (supplied)
3. Black rubber connection hose (supplied)
4. 1” or 1 1/4” Gear clamp
5. 3/4” insert x male pipe thread nylon adapter
6. 1 1/2” x 3/4” ABS dishwasher bushing
7. 1 1/2” ABS 45o wyes
5.
6.
7.
g 2. Connecng the drain hose with a so plasc end
1.
2.
3.
1. Dishwasher drain hose
2. Squeeze clamp (supplied)
3. 3/4” insert x male pipe thread nylon adapter
4. 1 1/2” x 3/4” ABS dishwasher bushing
5. 1 1/2” ABS 45o wyes
4.
5.
Pg. 14
CONNECTING AQUASTOP INLET HOSE TO THE DISHWASHER
o
303030
Method1: Garden hose install
* Use the brass adapter provided with the dishwasher to
connect the garden hose outlet to the Aquastop fi ll hose.
* The brass adapter allows for the connec on of a 3/4” GHT to a 3/4 metric thread.
* The AQUASTOP angle must not
be more than 30o from the ver cal for full func onality.
o
o
30
30
Garden hose
Brass Adapter
(Supplied with dishwasher)
AQUASTOP Fill hose
(Supplied with dishwasher)
Pg. 15
CONNECTING AQUASTOP INLET HOSE TO THE DISHWASHER
o
303030
Method2: Connec ng to exis ng 1/2” inlet
* A brass adapter that can be purchased from Home
Hardware (part# 3240102).
* The brass adapter allows for the connec on of a 1/2” inlet to a 3/4” metric thread.
* The AQUASTOP angle must not
be more than 30o from the ver cal for full func onality.
o
o
30
30
Exis ng 1/2 inlet
Brass Adapter
(Home Hardware
part# 3240102)
AQUASTOP Fill hose
(Supplied with dishwasher)
Pg. 16
GUARANTEE/CUSTOMER SERVICE CENTRES
EURO-LINE APPLIANCES INC.
LENGTH OF WARRANTY TWO YEAR FULL WARRANTY from original date of purchase,
including parts and labour, to the rst purchaser of this appliance.
When the appliance is installed, operated, and maintained
according to the instrucons aached to or provided with the
product, EURO-LINE APPLIANCES will pay for replacement parts and/or labour to repair defects in materials or workmanship. Service must be provided by an authorized Euro-Line company (unless advised otherwise). This warranty is void if the consumer
aempts to repair the appliance or has someone other than an
authorized person try to repair it. The sole and exclusive remedy under this warranty shall be product service and repair as provided herein. THIS GUARANTEE DOES NOT COVER COMMERCIAL USE.
EXCEPTIONS: EURO-LINE APPLIANCES WILL NOT PAY FOR THE FOLLOWING SERVICE CALLS:
1. To install or correct the installaon of an appliance
2. To provide instrucon on the use of an appliance.
3. To replace house fuses, re-set circuit breakers or correct house wiring.
4. To correct house plumbing.
5. To clean drains, lters or garbage disposals.
6. To repair an appliance if it fails due to misuse or abuse.
7. To repair cosmec damage to the appliance, unless such damage results from a defect in the workmanship or materials. Such damage must be reported to EURO-LINE APPLIANCES within 5 days from the date of purchase.
Pg. 17
The consumer shall ensure that it keeps all drains clear, that
it replaces all lters in accordance with the manufacturer’s specicaons and ensures that all electrical wiring meets local codes and conforms to the manufacturer’s specicaons. In no
event will EURO-LINE APPLIANCES or its parents, subsidiaries or
aliates be responsible for (i) damages which are caused, in whole or in part, by the consumer’s failure to comply with the foregoing obligaons, (ii) incidental, consequenal, punive, exemplary or
special damages, or (iii) damages in excess of the price paid for the product for which a claim is made. For warranty service and parts, contact EURO-PARTS. Service will be provided during normal business hours. Should you have a service problem that is not resolved locally, contact:
For Service and Parts Contact:
EURO-PARTS, USA
Tel: 1-800-561-4614 Fax: 1-519-528-5001
EURO-PARTS, CANADA
Tel: 1-800-678-8352 Fax: 1-519-528-5001
EURO-LINE APPLIANCES
1-800-421-6332 Tel. Direct: 1-905-829-3980 Fax: 1-905-829-3985
Pg. 18
USER INSTRUCTIONS & INSTALLATION MANUAL Service & Repair
To save you me and money please have the following informaon
ready in case you have to call for service:
Name of the dealer from whom you purchased the appliance
Model number (shown on the rang plate)
Serial number (shown on the rang plate)
Date of purchase
You should also retain the original purchase receipt to support any claim made under the warranty. (We suggest you staple the receipt to this page.)
If service is required, contact the Service Center:
EURO-PARTS, CANADA
Tel: 1-800-678-8352 Fax: 1-519-528-5001
EURO-PARTS, USA
Tel: 1-800-561-4614 Fax: 1-519-528-5001
DISTRIBUTED BY EURO-LINE APPLIANCES INC.
871 Cranberry Court, Oakville, ON, Canada L6L 6J7 Toll Free: 1-800-421-6332 Tel: 905-829-3980 Fax: 905-829-3985 www.euro-line-appliances.com
Pg. 19
NOTES
DISTRIBUTED BY EURO-LINE APPLIANCES INC.
871 Cranberry Court, Oakville, ON, Canada L6L 6J7
Toll Free: 1-800-421-6332
Tel: 905-829-3980
Fax: 905-829-3985
www.euro-line-appliances.com
Loading...