user manual benutzerinformation
Washing Machine
Waschmaschine
EWF 148541 W EWF 168541 W
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information |
2 |
Care and cleaning |
15 |
Product description |
4 |
What to do if… |
19 |
Control panel |
5 |
Technical data |
22 |
First use |
7 |
Consumption values |
22 |
Personalisation |
8 |
Installation |
23 |
Daily use |
8 |
Electrical connection |
26 |
Helpful hints and tips |
11 |
Environment concerns |
26 |
Washing programmes |
12 |
|
|
Subject to change without notice
SAFETY INFORMATION
Important! Read carefully & keep for future reference.
•The safety of Your appliance complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes.
•It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.
•You MUST read them carefully before installing or using the appliance.
•Before first starting up, check the appliance for any damage incurred during transport. Never connect up a damaged appliance . If parts are damaged, contact your supplier.
•If the appliance is delivered in the winter months when there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.
General safety
•It is dangerous to alter the specifications or attempt to modify this product in any way.
•During high temperature wash programmes the door glass may get hot. Do not touch it!
•Make sure that small pets and children do not climb into the drum. To avoid this, please check into the drum before using.
•Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.
•Only use the advised quantities of fabric softener and detergent. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.
•Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.
•Do not use your washing machine to wash articles with whalebones, material without hems or torn material.
•Always unplug the appliance and turn off the water supply after use, cleaning and maintenance.
•Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
•This appliance is heavy. Care should be taken when moving it.
•When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.
•All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.
•After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.
•If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.
•Always be sure, that there is no water leakage from hoses and their connections after the installation.
•If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.
•Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Use
•This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
•Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label.
•Do not overload the appliance. See the Washing Programme Table.
•Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.
•Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.
electrolux 3
•Never pull the power supply cable to remove the plug from the socket; always take hold of the plug itself.
•Never use the appliance if the power supply cable, the control panel, the working surface or the base are damaged so that the inside of the washing machine is accessible.
Child safety
•This appliance is not intended for use by person (including children) with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
•Keep all detergents in a safe place out of children’s reach.
•Make sure that children or pets do not climb into the drum. To prevent children and pets becoming trapped inside the drum the machine incorporates a special feature. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.
To disable this device and restore the possibility of closing the door, rotate the button counterclockwise until the groove is vertical.
4 electrolux
PRODUCT DESCRIPTION
Your new appliance meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so saving energy.
1 2
3
4
5
|
|
|
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
||
|
Detergent dispenser drawer |
|
|
Rating Plate |
|||||
1 |
4 |
||||||||
|
Control panel |
|
|
Drain pump |
|||||
2 |
5 |
||||||||
|
Door opening handle |
|
|
Adjustable feet |
|||||
3 |
6 |
Detergent dispenser drawer
Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available). The prewash and soak detergent is added at the beginning of the wash programme. The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent used for main wash. If using liquid detergent pour it just before starting the programme.
Compartment for liquid additives (fabric softener, starch).
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer. Any fabric softener or starching additives must be poured into the compartment before starting the wash programme.
electrolux 5
CONTROL PANEL
Below is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lights and the display. These are presented by relevant numbers on the following pages.
1 |
2 |
3 |
1Programme selector dial
2Display
3TEMPERATURE button
4SPIN reduction button
5PREWASH button
6EXTRA RINSE button
7DELAY START button
8START/PAUSE button
9TIME MANAGER buttons
Programme Selector Dial
It allows you to switch the appliance on/off and/or to select a programme.
Temperature
This button allows you to increase or decrease the washing temperature.
Spin Reduction
By pressing this button you can change the spin speed of the selected programme.
Prewash
By selecting this option the machine performs a prewash cycle before the main wash phase. The washing time will be pro-
4 |
5 |
6 |
7 |
8 |
9 |
longed. This option is recommended for heavily soiled laundry.
Extra Rinse
This appliance is designed to save energy. If it necessary to rinse the laundry using an extra quantity of water (extra rinse), select this option. Some additional rinses will be performed. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Delay Start
The programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Start Pause
This button allows you to start or to interrupt the selected programme.
Time Manager
These buttons allows you to modify the programme duration automatically proposed by the appliance.
6 electrolux
Display
|
|
|
|
|
|
2.12 |
|
|
|
|
|
2.11 |
|
2.10 |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.1 |
|
2.2 |
|
2.3 |
|
2.4 |
|
2.5 |
|
2.6 |
|
2.7 |
|
2.8 |
|
2.9 |
The display shows the following information: 2.1: Temperature value
2.2: Temperature icons , Cold
. During the washing cycle the display shows the temperature icon animated to indicate that the appliance has started the heating phase of the water in the tub.
2.3: Spin value
2.4: Spin speed icons.
•No spin
•Rinse Hold
•Night Cycle
During the spinning phase the spiral is animated.
No spin option eliminates all the spin phases and increases the number of rinses for some programmes.
Rinse Hold: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows flashing , the icon 2.8 is still visualized, the light of button 8 is off and the door is locked to indicate that the water must be emptied out. To empty out the water, please read the paragraph «At the end of the programme».
Night Cycle: by selecting this option, the machine will not drain the water of the last rinse, so as not to wrinkle the laundry. As all spinning phases are suppressed, this washing cycle is very noiseless and it can be selected at night or in times with a more economical power rate. On some programmes the rinses will be performed with more water. When the programme has finished, the display shows flashing , the icon 2.8 is still visualized, the light of button 8 is off and the door is locked to indicate that the water must be emptied out. To empty out the water, please read the paragraph «At the end of the programme».
2.5: Option icons : Extra Rinse |
or Easy |
|
Iron |
. |
|
2.6: Delay icon
The selected delay set by pressing the relevant button appears on the display for a few seconds, then the duration of the previously selected programme is displayed. The relevant icon is lighted on. The delay time value decreases by one unit every hour and then, when 1 hour remains, the time decreases every minute.
2.7: Child safety lock |
(see «Personali- |
sation» chapter). |
|
2.8: Door locked icon
After you have pressed button 8 and the machine has started, this icon is lighted on and only the phase running icon stays on. When the programme has finished, three flashing
zeros ( |
) are displayed and this icon |
disappears. |
|
2.9: |
|
•Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for example ). The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. After the programme has started, the time remaining is updated every minute.
•End of programme
When the programme has finished three flashing zeros ( ) are displayed, the icon 2.8 disappears and the door can be opened.
•Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom of the display for a few seconds and the integrated red light of button 8 start flashing.
•Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example (see paragraph «What to do if...»).
•Delay Time value 2.10: Soil degree icons
•Intensive
•Normal
•Daily
•Light
•Quick
•Super Quick
•Refresh
•Super Refresh
(see paragraph «Select Time Manager option»).
2.11: Clock icon
Table of Symbols
= Cottons
= Synthetics
= Delicates
= Wool
= Handwash
= Lingerie
= Rinse
= Drain
= Spin
= Cottons economy
= Blanket
= Easy iron
= 14 Min.
electrolux 7
After the programme has started, the duration is displayed and the clock icon is animated.
2.12: Washing programme phase icons
By selecting the wash programme, the washing programme phase icons corresponding to the various phases making up the programme are shown in the upper part of the display. After having pressed button 8 only the icon of the running phase stays on:
•Prewash (this icon lights on when the relevant option button is selected as well)
•Wash
•Rinses
•Drain
•Spin
= Shirts
= Cool clean
= Special
= Temperature
= Spin reduction
= Prewash
= Extra rinse
= Delay start
= Child safety lock
= Start/Pause
= Time manager
FIRST USE
• Ensure that the electrical and water connections comply with the installation instructions.
•Remove the polystyrene block and any material from the drum.
•Before the first wash, run a cotton cycle at the highest temperature with-
out any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment and start the machine.
8 electrolux
PERSONALISATION
Acoustic signals
The machine is provided with an acoustic device, which sounds in the following cases:
•at the end of the cycle
•if there is a fault.
By pressing the 5 and 6 buttons simultaneously for about 6 seconds , the acoustic signal is deactivated (except if there is a fault). By pressing these 2 buttons again, the acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended and not to worry that children might be injured by or cause damage
to the appliance. This function remains enabled also when the washing machine is not working.
There are two different ways to set this option:
1.Before pressing button 8 : it will be impossible to start the machine.
2.After pressing button 8 : it will be impossible to change any other programme or option.
To enable or disable this option press simultaneously for about 6 seconds buttons 6 and 7 until on the display, the icon appears or disappears.
DAILY USE
Load the laundry
Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door.
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops. Measure out the amount of detergent required, pour it into the main wash compartment or in the appropriate compartment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»).
If required, pour fabric softener into the compartment marked (the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently.
Select the required programme by turning the programme selector dial (1)
Turn the programme selector dial to the required programme. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating the corresponding buttons. The green pilot light of the button 8 starts to flash.
The selector dial can be turned either clockwise or counterclockwise. Turn to position to reset programme/Switching the machine off.
At the end of the programme the selector dial must be turned to position , to switch the machine off.
Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 8 will blink 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme.
Select the temperature by pressing button 3
By selecting a programme, the appliance proposes automatically a default temperature.
Press this button repeatedly to increase or decrease the temperature, if you want your
electrolux 9
laundry to be washed at a different temperature.
Reduce the spin speed by pressing button 4
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.
Press button 4 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed.
Select the available options by pressing buttons 4, 5 and 6
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing button 8 . When these buttons are pressed, the corresponding icons appear on the display. When they are pressed again, the icons disappear. If an incorrect option is selected, the integrated red pilot light of the button 8 flashes for 3 times and the Err message appears on the display for a few seconds.
For the compatibility among the washing programmes and the options see chapter «Washing Programmes».
Select the Delay Start by pressing button 7
Before you start the programme, if you wish to delay the start, press the button 7 repeatedly, to select the desired delay. The corresponding icon 2.6 will appear on the display in the upper part of the display.
The selected delay time value (up to 20 hours) will appear on the display a few seconds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you press button 8 .
You can cancel or modify the delay time at any moment, before you press button 8 . Selecting the delayed start:
1.Select the programme and the required options.
2.Select the delay start by pressing the button 7 .
3.Press button 8 :
–the machine starts its hourly countdown.
10 electrolux
–The programme will start after the selected delay has expired.
Cancelling the delayed start after having pressed button 8 :
1.Set the washing machine to PAUSE by pressing button 8 .
2.Press button 7 once until the symbol ’ is displayed
3.Press button 8 again to start the programme.
Important! The selected delay can be changed only after selecting the washing programme again.
The Delay Start can not be selected with DRAIN programme.
Start the programme by pressing button 8
To start the selected programme, press the button 8 , the green pilot light of the button 8 stops blinking. The icon 2.8 appears on the display to indicate that the appliance starts operating and the door is locked.
To interrupt a programme which is running, press the button 8 : the green pilot light starts to blink.
To restart the programme from the point at which it was interrupted, press the button 8 again . If you have chosen a delayed start, the machine will begin the countdown.
If an incorrect option is selected, the red pilot light of the button 8 blinks for 3 times the message Err is displayed for few seconds.
Select the Time Manager option by pressing buttons 9
By pressing these buttons repeatedly, the duration of the washing cycle can be increased or decreased. The icon 2.10 will appear on the display to indicate the chosen degree of soil. This option is available only with Cotton , Synthetic and Delicate programmes.
Soil Level |
Icon |
Type of fabric |
Intensive |
|
For heavy soiled |
|
|
items |
Normal |
|
For normal soiled |
|
|
items |
Daily |
|
For daily soiled items |
|
|
|
Light |
|
For slightly soiled |
|
|
items |
Soil Level |
|
Icon |
|
Type of fabric |
Quick |
|
|
|
For very slightly |
|
|
|
|
soiled items |
Super Quick 1) |
|
|
|
For items used or |
|
|
|
|
worn for a short time |
Refresh 1) |
|
2) |
|
For refreshing items |
|
|
|
|
only |
Super Re- |
|
2) |
|
For refreshing a very |
fresh 1) |
|
|
|
few items only |
1)We recommend you to reduce the load sizes (see Washing programmes table).
2)When you select this option the relevant icon appears just for a while and then it disappears immediately.
Altering an option or a running programme
It is possible to change some options before the programme carries them out . Before you make any change, you must PAUSE the appliance by pressing the button 8 (if you wish to change the Time Manager option, you must cancel the running programme and make your selection again). Changing a running programme is possible only by resetting it. Turn the programme selector dial to and then to the new programme position. Start the new programme by pressing the button 8 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 8 to interrupt a programme which is running, the corresponding green pilot light starts blinking.
Press the button again to restart the programme.
Cancelling a programme
Turn the selector dial to to cancel a programme which is running.
You can select now a new programme.
Opening the door
After the programme has started (or during the delay time) the door is locked, if you need to open it, set first the machine to PAUSE by pressing the button 8 .
If the icon 2.8 disappears after some minutes, the door can be opened.
If the icon 2.8 does not go off, this means that the machine is already heating or that the water level is too high. Do not try to force the door!
If you cannot open the door but you need to open it you have to switch the machine off by turning the selector dial to . After a few minutes the door can be opened (pay attention to the water level and temperature!) .
After closing the door, it is necessary to select the programme and options again and to press button 8 .
At the end of the programme
The machine stops automatically. Three blinking zeros ( ) appear on the display and the pilot light of button 8 goes off. Some acoustic signals sound for a few minutes.
If a programme or an option that ends with water left in the tub has been selected, the icon 2.8 remains displayed to indicate that the water must be emptied out before opening the door.
electrolux 11
Follow the below instructions to empty out the water:
1.Turn the programme selector dial to .
2.Select the draining or spinning programme.
3.Reduce the spin speed if needed, by pressing the relevant button.
4.Press button 8 .
At the end of the programme, the icon 2.8 disappears and the door can be opened. Turn the programme selector dial to to switch the machine off.
Remove the laundry from the drum and carefully check that the drum is empty. If you do not intend to carry out another wash, close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
Stand by : once the programme has finished after a few minutes the energy saving system will be enabled. The brightness of the
display is reduced. By pressing any button the appliance will come out of the energy saving status.
HELPFUL HINTS AND TIPS
Sorting out the laundry
Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites may lose their «whiteness» in the wash.
New coloured items may run in the first wash; they should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
12 electrolux
Ball point pen and glue: moisten with acetone1), lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated spirits. Treat any residual marks with bleach. Red wine: soak in water and detergent, rinse and treat with acetic or citric acid, then rinse. Treat any residual marks with bleach.
Ink: depending on the type of ink, moisten the fabric first with acetone1) , then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly.
Tar stains: first treat with stain remover, methylated spirits or benzine, then rub with detergent paste.
Detergents and additives
Good washing results also depend on the choice of detergent and use of the correct quantities to avoid waste and protect the environment.
Although biodegradable, detergents contain substances which, in large quantities, can upset the delicate balance of nature.
The choice of detergent will depend on the type of fabric (delicates, woollens, cottons, etc.), the colour, washing temperature and degree of soiling.
All commonly available washing machine detergents may be used in this appliance:
•powder detergents for all types of fabric
•powder detergents for delicate fabrics (60°C max) and woollens
•liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only.
The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme.
If using liquid detergents, a programme without prewash must be selected.
Your appliance incorporates a recirculation system which allows an optimal use of the concentrated detergent.
Follow the product manufacturer’s recommendations on quantities to use and do not exceed the «MAX» mark in the detergent dispenser drawer .
Quantity of detergent to be used
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
•you are washing a small load
•the laundry is lightly soiled
•large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high we suggest you to add a water softener following always the manufacturer’s instructions. When the degree of hardness is soft, readjust the quantity of the detergent.
WASHING PROGRAMMES
Programme - Maximum and Minimum Tempera- |
|
|
|
Detergent Com- |
|
ture - Cycle Description - Maximum Spin Speed - |
|
Options |
|
||
|
|
partment |
|||
Maximum Fabrics Load - Type of Laundry |
|
|
|
||
|
|
|
|
|
|
Cottons |
|
SPIN REDUCTION |
|
|
|
90° - Cold |
|
NIGHT CYCLE |
|
|
|
|
|
|
|
||
Main wash - Rinses |
|
RINSE HOLD |
|
|
|
Spin speed at maximun speed |
|
NO SPIN |
|
|
|
Max. load 8 kg - Reduced load 4 kg |
|
PREWASH1) |
|
|
|
White and coloured cotton (normally soiled items). |
|
EXTRA RINSE |
|
|
|
|
|
TIME MANAGER2) |
|
|
|
1) do not use acetone on artificial silk
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry
Synthetics
60° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm Max. load 4 kg - Reduced load 2 kg
Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses.
Delicates
40° - Cold
Main wash - Rinses
Maximum spin speed at 700 rpm Max. load kg 4 - Reduced load kg 2
Delicate fabrics: acrylics, viscose, polyester.
Wool/Handwash
40° - Cold
Main wash - Rinses
Maximum spin speed at 1000 rpm Max. load 2 kg
Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with «hand washing» care symbol.
A single or bulky item may cause imbalance. If the appliance doesn’t perform the final spin phase, add more items, redistribute the load manually and then select the spinning programme.
Lingerie
40° - Cold
Main wash - Rinses
Maximum spin speed at 1000 rpm Max. load 2 kg
This programme is suitable for very delicate items such a lingerie, bras and underwear. The maximum spin speed is automatically reduced.
Rinse
Rinse - Long spin
Spin speed at maximun speed Max. load 8 kg
With this programme it is possible to rinse and spin cotton garments which have been washed by hand. To intensify the rinsing action, select the option EXTRA RINSE. The appliance will add some additional rinses.
Drain
Draining of water Max. load 8 kg
For emptying out the water of the last rinse in programmes with the option selected, which ends with water left in the tub.
Options
SPIN REDUCTION NIGHT CYCLE RINSE HOLD NO SPIN PREWASH1) EXTRA RINSE TIME MANAGER2)
SPIN REDUCTION NIGHT CYCLE RINSE HOLD NO SPIN PREWASH1) EXTRA RINSE TIME MANAGER2)
SPIN REDUCTION NIGHT CYCLE RINSE HOLD NO SPIN
SPIN REDUCTION NIGHT CYCLE RINSE HOLD NO SPIN
SPIN REDUCTION NIGHT CYCLE RINSE HOLD NO SPIN
EXTRA RINSE
electrolux 13
Detergent Com-
partment
14 electrolux
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed - Maximum Fabrics Load - Type of Laundry
Spin
Drain and long spin
Maximum spin speed at 1400 rpm Max. load 8 kg
Separate spin for hand washed garments and after programmes with the option selected, which ends with water left in the tub. You can choose the spin speed by pressing the relevant button to adapt it to the fabrics to be spun.
Cotton economy
90° - 40°
Main wash - Rinses
Spin speed at maximun speed Max. load 8 kg
White and fast coloured cotton .
This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency so saving energy.
Blanket
40° - 30°
Main wash - Rinses
Maximum spin speed at 700 rpm Max. load 2,5 kg
For a single washable synthetic blanket or duvet.
Easy Iron
60° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm Max. load 1 kg
Selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Furthermore the machine will perform additional rinses.
14 min.
30°
Main wash - Rinses
Maximum spin speed 900 rpm Max. load 2 kg
Short washing cycle ideal for laundry which only needs freshening up.
Shirts
30°
Main wash - Rinses
Maximum spin speed at 900 rpm Max. load 1 kg
A special programme for washing lightly soiled shirts.
Options
SPIN REDUCTION
SPIN REDUCTION NIGHT CYCLE RINSE HOLD NO SPIN PREWASH1) EXTRA RINSE
SPIN REDUCTION
SPIN REDUCTION
RINSE HOLD
NO SPIN
PREWASH1)
EXTRA RINSE
SPIN REDUCTION
RINSE HOLD
NO SPIN
SPIN REDUCTION
NO SPIN
Detergent Com-
partment
|
|
|
|
electrolux 15 |
|
|
|
|
|
|
|
Programme - Maximum and Minimum Tempera- |
|
|
|
Detergent Com- |
|
ture - Cycle Description - Maximum Spin Speed - |
|
Options |
|
||
|
|
partment |
|||
Maximum Fabrics Load - Type of Laundry |
|
|
|
||
|
|
|
|
|
|
Cool clean |
|
SPIN REDUCTION |
|
|
|
|
|
|
|
||
Cold |
|
NO SPIN |
|
|
|
Main wash - Rinses |
|
RINSE HOLD |
|
|
|
Maximum spin speed at 1200 rpm |
|
EXTRA RINSE |
|
|
|
Max. load 3 kg |
|
|
|
|
|
Highly energy efficient cold wash programme for light- |
|
|
|
|
|
ly soiled laundry made of cottons, synthetic or mixed |
|
|
|
|
|
fabrics. This programme requires the use of detergent |
|
|
|
|
|
which is already active in cold water. |
|
|
|
|
|
In case of water inlet temperatures lower than |
|
|
|
|
|
6°C the machine will execute a short heating |
|
|
|
|
|
phase. The detergent must be used with the sup- |
|
|
|
|
|
plied or a suitable detergent dosing cap (use the |
|
|
|
|
|
amount of the detergent recommended by deter- |
|
|
|
|
|
gent's manufacturer). |
|
|
|
|
|
O = OFF |
|
|
|
|
|
For cancelling the programme which is running or to |
|
|
|
|
|
switch the machine off . |
|
|
|
|
|
|
|
|
|
|
|
1)If using liquid detergents, a programme without PREWASH must be selected.
2)If you select the Super Quick option by pressing the buttons 9 , we recommend that you reduce the maximum load as indicated in this chart. Full loading is possible however with somewhat reduced cleaning results. If you select the Refresh or Super Refresh option, we recommend that you reduce the load even more.
CARE AND CLEANING
Warning! You must disconnect the appliance from the electricity supply, before you can carry out any cleaning or maintenance work.
Descaling
The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
After each wash
Leave the door open for a while. This helps to prevent mould and stagnant smells forming inside the appliance. Keeping the door open after a wash will also help to preserve the door seal.
Maintenance wash
With the use of low temperature washes it is possible to get a build up of residues inside the drum.
We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:
•The drum should be empty of laundry.
•Select the hottest cotton wash programme.
•Use a normal measure of detergent, must be a powder with biological properties.
External cleaning
Clean the exterior cabinet of the appliance with soap and water only, and then dry thoroughly.
Important! Do not use methylated spirits, solvents or similar products to clean the cabinet.
Cleaning the dispenser drawer
The detergent dispenser drawer should be cleaned regularly.
The washing powder and additive dispenser drawer should be cleaned regularly. Remove the drawer by pressing the catch downwards and by pulling it out.
16 electrolux
Flush it out under a tap, to remove any traces of accumulated powder.
To aid cleaning, the top part of the additive compartment should be removed. Clean all parts with water.
Clean the chamber of dispenser drawer with a brush.
Washing drum
Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.
Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.
1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.
2.Run a washing cycle without any washing to clean off any cleaning agent residues.
Programme: Short Cotton Programme at maximum temperature and add approx. 1/4 measuring cup of detergent.
Door seal
Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold.
Drain pump
The pump should be inspected regularly and particularly if:
•the appliance does not empty and/or spin;
•the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.
•a problem with water draining is detected (see chapter “What to do if...” for more details).
Warning! Before opening the pump door, switch the appliance off and remove the mains plug from the socket.
Proceed as follows:
1.Unplug the appliance.
2.If it is necessary, wait until the water has cooled down.
3.Open the pump door.
4.Place a container close to the pump to collect any spillage.
5.Pull out the emergency emptying hose, place it in the container and remove its cap.
electrolux 17
6.When no more water comes out, unscrew the pump cover by turning it anticlockwise and remove the filter. Use pliers, if necessary. Always keep a rag nearby to dry up any water spillages when removing the cover.
Clean the filter under a tap, to remove any traces of fluff.
7.Remove foreign bodies and fluff from the filter seat and from the pump impeller.
8.Check carefully whether the pump impeller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Service Centre.