AEG EU6221U User Manual

INSTRUCTION MANUAL
KÄYTTÖOHJE
BRUKSANVISNING
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
2222 736-32
EU 6221 U
freezer / pakastinkaappi / frysskåp /
GB
FIN
S
RUS
2
CONTENTS
Instructions for the user
Important Safety Instructions 3 Description of the appliance 4
Use 5
Cleaning the interior 5 Control panel 5 Starting up 5 Temperature regulation 5 Quick freezing 5 Warning light 6 Acoustic alarm 6 Freezing calendar 6 Freezing of fresh foods 6 Storage of commercially frozen food 6 Thawing 6 Ice-cube production 6
Tips 7
Tips for freezing fresh foods 7 Tips for storage of commercially frozen food 7
Maintenance 8
Defrosting 8 Periodic cleaning 8 Periodios of non-operation 8
Something not Working 9
Instructions for the installer
Technical specifications 9 Installation 10
Positioning 10 Electrical connection 10 Grid preparation 10 Door reversal 11 Building the appliance in under a worktop 11 Fitting the plinth 13
IMPORTANT SAFETY INSTRUCTIONS
General Safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
It is dangerous to alter the specifications or modify this product in any way.
Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.
This appliance is heavy. Care should be taken when moving it.
Ice follies can cause frost burns if consumed straight from the appliance.
Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.
The appliance must not be located close to radiators or gas cookers.
Avoid prolonged exposure of the appliance to direct sunlight.
There must be adequate ventilation round the back of the appliance and any damage to the refrigerant circuit must be avoided.
For freezers only (except built-in models): an ideal location is the cellar or basement.
Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances.
Service / Repair
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
This appliance should be serviced by an authorised Service Centre, and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Centre, and always insist on genuine spare parts.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorised technicians.
Use
The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.
Frozen food must not be re-frozen once it has been thawed out.
Manufacturers’ storage recommendations should be strictly adhered to. Refer to relevant instructions.
The inner lining of the appliance consists of channels through which the refrigerant passes. If these should be punctured this would damage the appliance beyond repair and cause food loss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Frost may be removed by using the scraper provided. Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw when defrosting the appliance. See defrost instructions.
Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. Never use metal objects for cleaning your appliance as it may get damaged.
Installation
Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Important: if the supply cable is damaged, it must be replaced by authorised service or qualified personnel using a special cable of the same type.
During normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the relevant Figure.
3
t
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety. You must read them carefully before installing or using the appliance.
Attention: keep ventilation openings clear of obstruction.
If the appliance is transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.
There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.
Parts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.
If the appliance has been transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from your municipal authorities.
The materials used on this appliance marked with the symbol are recyclable.
4
DESCRIPTION OF THE APPLIANCE
Air outlet duct
Freezer controls
Air inlet filter
Comparments for storing frozen food
Compartments for freezing fresh food
USE
Starting up
Insert the plug into the wall socket. The appliance can be activated/deactivated by pressing the ON/OFF button ➅.The pilot light ➄will light up to show that the appliance is on.
temperature and frequent door openings, it might be necessary to select a more suitable setting.
Turn knob ➆towards “max” to obtain lower
temperatures and, conversely, towards “min” if a less cold temperature is required. Freezer operation can be halted by turning knob ➆to position «».
5
t
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish.
The freezer is marked with the symbol, which means that the compartment is suitable for freezing fresie food and long-term storage of frozen food.
Control panel
➄➅ ➁➃
Symbol for acoustic alarm
Fast freeze switch and for stopping the acoustic alarm (warning light on)
Fast freeze light (yellow)
Warning light (red)
Pilot light (green)
Push button ON/OFF
Thermostat control knob
Temperature regulation
Turn knob ➆beyond the «» position. To safely store frozen and deep-frozen foods, the
inner temperature of the freezer must be at least
-18°C or colder. Therefore, we suggest you turn the knob ➆to a medium setting.
The temperature inside the freezer is automatically adjusted to ensure safe storage of the food. However if the appliance works in unfavourable room conditions such as poor ventilation, high ambient
Quick freezing
Activate fast freeze by depressing the fast freeze switch ➁. The pilot lamp ➂will then light up. The SUPER function can be ended by pressing the button
again. The yellow light goes out.
Loading...
+ 9 hidden pages