AEG ESF68070XR User Manual

user manual

Dishwasher

ESF 68070

2 electrolux

Electrolux. Thinking of you.

Share more of our thinking at www.electrolux.com

CONTENTS

Safety information 2
Product description 4
Control panel 5
Use of the appliance 8
Setting the water softener 8
Use of dishwasher salt 9
Use of detergent and rinse aid 10
Multitab function 10
Loading cutlery and dishes 11

SAFETY INFORMATION

Before the installation and use, read this
manual carefully:

• For your safety and the safety of your
property.

• To help the environment.

• For the correct operation of the appli­ance.

Always keep these instructions with the ap­pliance also if you move or give it to a differ­ent person.
The manufacturer is not responsible if an in­correct installation and use causes dam­age.

Children and vulnerable persons safety

• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge to use the appliance.
They must have supervision or instruction
for the operation of the appliance by a
person who is responsible for their safety.

• Keep all packaging away from children.
There is the risk of suffocation or injury.

• Keep all detergents in a safe area. Do not
let the children touch the detergents.

• Keep children and pets away from the
appliance when the door is open.

General safety

• Do not change the specifications of this
appliance. There is the risk of injury and
damage to the appliance.

• Obey the safety instructions from the de­tergent manufacturer to prevent burns to
eyes, mouth and throat.

Select and start a washing programme

11
Washing programmes 12
Care and cleaning 14
What to do if… 14
Technical data 16
Environment concerns 17
Installation 17

Subject to change without notice

• Do not drink the water from the appli-

ance. Particles of detergent can stay in
your appliance.

• Do not keep the appliance door open

without supervision. This to prevent injury
and to fall on an open door.

• Do not sit or stand on the open door.

Use

• The appliance is only for domestic use.

Do not use the appliance for other uses
to prevent injury to persons and damage
to property.

• Only use the appliance to clean accesso-

ries that are applicable for dishwashers.

• Do not put flammable products or items

that are wet with flammable products in,
near or on the appliance. Risk of explo­sion or fire.

• Put the knives and all items with sharp

points in the cutlery basket with their
points down. If not, put in a horizontal
position in the upper basket or in the
knife basket. (Not all models have the
knife basket).

• Use only specified products for dish-

washers (detergent, salt, rinse aid).

• Types of salt that are not specified for

dishwashers can cause damage to the
water softener.

• Fill the appliance with salt before you

start a washing programme. Remaining
salt in the appliance can cause corrosion
or make a hole in the bottom of the appli­ance.

electrolux 3

• Do not fill the rinse aid dispenser with
other products than the rinse aid, (dish­washer cleaning agent, liquid detergent).
This can cause damage to the appliance.

• Make sure that the spray arms can move
freely before you start a washing pro­gramme.

• The appliance can release hot steam if
you open the door while a washing pro­gramme operates. There is a risk of skin
burns.

•Do not remove the dishes from the appli­ance until the washing programme is
completed.

Care and cleaning

• Before you clean the appliance, deacti­vate it and disconnect the mains plug
from the mains socket.

• Do not use flammable products or prod­ucts that can cause corrosion.

• Do not use the appliance without the fil­ters. Make sure that the installation of the
filters is correct. An incorrect installation
causes unsatisfactory washing results
and damage to the appliance.

• Do not use spray water or steam to clean
the appliance. Risk of electrical shock
and damage to the appliance.

Installation

• Make sure that the appliance is not dam­aged. Do not install or connect a dam­aged appliance, contact the supplier.

• Remove all packaging before you install
and use the appliance.

• Only a qualified person must do the elec­trical connection, the plumbing and the
installation of the appliance. This to pre­vent the risks of structural damage or in­jury.

• Make sure that the mains plug is discon­nected from the mains socket during in­stallation.

• Do not drill into the sides of the appliance
to prevent damage to hydraulic compo­nents and electrical components.

Frost precautions

• Do not install the appliance where the
temperature is less than 0 °C.

• The manufacturer is not responsible for
frost damage.

Water connection

• Use new hoses to connect the appliance
to the water supply. Do not use used ho­ses.

• Do not connect the appliance to new
pipes or pipes not used for a long time.
Let the water flow for some minutes, then
connect the inlet hose.

• Make sure not to squash or cause dam­age to the water hoses when you install
the appliance.

• Make sure that the water couplings are
tight to prevent a water leakage.

• The first time you use the appliance,
make sure that the hoses do not have
water leaks.

Electrical connection

• The appliance must be earthed.

• Make sure that the electrical information
on the rating plate agrees with the power
supply.

• Always use a correctly installed shock­proof socket.

• Do not use multiple plugs and extension
cables. There is a risk of fire.

• Do not replace or change the mains ca­ble. Contact the service centre.

• Make sure not to squash or cause dam­age to the mains plug and cable behind
the appliance.

• Make sure that there is access to the
mains plug after the installation.

• Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.

Internal lamp

This appliance has an internal lamp that
comes on when you open the door and
goes off when the door is closed.

Warning! Visible led radiation, do not
look directly into the beam.

The LED of the lamp is CLASS 2 and
agrees with IEC 60825-1: 1993 + A1:1997
+ A2:2001.
Emission wave length: 450 nm
Maximum emitted power: 548 μW

4 electrolux

To replace the internal lamp, contact
the service centre.
Disconnect the mains plug from the
mains socket before the replacement
of the internal lamp.

Service centre

• Only a qualified person can repair or work
on the appliance. Contact the service
centre.

• Use only original spare parts.

To discard the appliance

• To prevent the risk of injury or damage:
– Disconnect the mains plug from the

mains socket.
– Cut off the mains cable and discard it.
– Remove the door catch. This prevents

children or pets to be closed in the ap-

pliance. There is a risk of suffocation.
– Discard the appliance at the local

waste disposal centre.

PRODUCT DESCRIPTION

Warning! The dishwasher
detergents are dangerous and can
cause corrosion !

• If an accident occurs with these de­tergents, contact immediately a
physician.

• If the detergent gets into the mouth,
contact immediately a physician.

• If the detergent gets into the eyes,
contact immediately a physician and
clean the eyes with water.

• Keep dishwasher detergents in a
safe area and out of children touch.

• Do not keep the appliance door
open when there is detergent in the
detergent dispenser.

• Fill the detergent dispenser only be­fore you start a washing programme.

1 Upper basket
2 Water hardness dial
3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser

7

6 Rating plate
7 Filters
8 Lower spray arm
9 Upper spray arm

10 Worktop

CONTROL PANEL

electrolux 5

1

1 On/off button
2 Programme scroll button
3 Delay start scroll button
4 Option scroll button
5 OK button
6 Start button
7 Display

The messages in the display and the
audible signals help you to operate with
the appliance.

Display

A

The display has 3 areas. To select an area,
press the programme scroll button until the
necessary area is emphasized with a high­lighted frame.

Programs area (A)

This area of the display shows the available
washing programmes and the duration of
each programme.

1. Press the programme scroll button to
select the area.

2. Press again the programme scroll but­ton. The area increases and the display
shows:
– the washing programmes,
– the duration of the washing pro-

grammes,

B

C

7

2

34

3. Press the programme scroll button to
go through the washing programmes
menu.

4. Select a washing programme.

5. Press the OK button to confirm.
The display shows again the three
areas.
– The Programs area shows the set

programme and the duration of the
programme.

– The End Time area (B) shows the ap-

proximate end time of the washing
programme (time + the programme
duration).

End Time area (B)

You can delay the start of the washing pro­gramme maximum 24 hours.

1. Press the delay start scroll button to se­lect the area.

2. Continue to press the button to select
the number of hours of the delay start.
– The upper part of the area shows the

delay start.

– The lower part of the area shows the

approximate end time of the washing
programme.

3. Press the OK button to confirm.

6

5

6 electrolux

Options area (C)

1. Press the option scroll button to select
the area.

4. Press the programme scroll button to
exit from the option menu and go back
to the Programs area.

2. Continue to press the option scroll but­ton to go through the option menu.

3. Press the OK button to:
– go to the submenu,
– select an option,

Option menu

Menu Submenu Description of the option

Wash guide Program guide The display shows related data

Option guide The display shows related data

Demo mode

Back To go back to the option menu.

On
Off

for the washing programmes.

for the functions.

With this function you can sim­ulate a washing programme.

1. Activate the function. The
display shows three areas
and in the upper left corner
of the display you see
DEMO.

2. Use the optional function
scroll button to set the
washing programme and
the functions.

Deactivate the function to go
back to usual condition. Facto­ry set: off.

Save energy

On
Off

This function decreases the

temperature in the drying
phase. The energy decrease is
between 10% and 25%.
The dishes can be wet at the
end of the programme. We rec­ommend that you open the ap­pliance door and keep it ajar to
let the dishes dry.
This function is available with all
washing programmes but does
not have an effect on some
programmes. Refer to 'Wash­ing programmes'.

electrolux 7

Menu Submenu Description of the option

Extra rinse

On
Off

This function adds one more

cold rinse to the washing pro­gramme.
The programme duration and
the water consumption in­crease when this function is
used.
This function is available with all
washing programmes but does
not have an effect on some
programmes. Refer to 'Wash­ing programmes'.

Multitab

On
Off

The multitab function is for

combi detergent tablets. Refer
to 'Multitab function'.

Settings Language english You can set the language of

the messages in the display.
Different languages are availa­ble.

Sound volume

On
Off

You can adjust the volume of
all the audible signals.
5 levels are available.
Level 0 = volume off.
Factory set: level 5.

Time You can set the time.

Brightness You can increase or decrease

the intensity of the light of the
display.
10 levels are available.
Factory set: level 10.

Contrast You can increase or decrease

the contrast of the display.
10 levels are available.
Factory set: level 6.

Reset settings You can go back to the factory

set of the appliance.

Water hardness You can adjust the level of the

water softener. Refer to 'Set­ting the water softener'.
10 levels are available.
Factory set: level 5.

Rinse aid

On
Off

You can activate/deactivate the
rinse aid dispenser.
This option is available only
with the multitab function on.

Back To go back to the option menu.

8 electrolux

USE OF THE APPLIANCE

Switch on for the first time - set the
display language and the time

1. Switch on the appliance.

2. The display shows a message in the de­fault language: Language English .
– Press the OK button to confirm.
– Press the option button to select a

different language and then press the
OK button to confirm.

3. The display shows the time message,
you can adjust the time.

4. Press the option button to set the time.

5. Press the OK button to confirm.

6. The display goes to 'Programs' area.

Refer to the instructions for each step of
procedure:

1. Make a check if the adjustment of the
water softener agrees with the water
hardness in your area. If necessary, ad­just the water softener.

2. Fill the salt container with dishwasher
salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the appli­ance.

5. Set the correct washing programme for
the type of load and soil.

6. Fill the detergent dispenser with the cor­rect quantity of detergent.

7. Start the washing programme.

If you use the combi detergent tablets
('3 in 1', '4 in 1', '5 in 1'), refer to 'Multi­tab function'.

SETTING THE WATER SOFTENER

The water softener removes minerals and
salts from the water supply. These minerals
and salts can cause damage to the appli­ance.

Water hardness

German degrees

(°dH)

51 - 70 91 - 125 9,1 - 12,5 64 - 88

43 - 50 76 - 90 7,6 - 9,0 53 - 63

37 - 42 65 - 75 6,5 - 7,5 46 - 52

29 - 36 51 - 64 5,1 - 6,4 36 - 45

23 - 28 40 - 50 4,0 - 5,0 28 - 35

19 - 22 33 - 39 3,3 - 3,9 23 - 27

15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4

11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3

4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2

< 4 < 7 < 0,7 < 5

1) Factory position.

2) Do not use salt at this level.

French degrees

(TH°)

You must adjust the water softener
manually and electronically.

Adjust the level of the water softener if this
does not agree with the water hardness in
your area.
Contact your local water authority to know
the water hardness in your area.

Water hardness ad-

mmol/l Clarke de-

grees

manually elec-

2

2

justment

1)

1)

1)

2

1)

2

1)

2

1)

2

2)

1

troni-

cally

10

9

8

7

6

1)

5

2)

1

electrolux 9

Manual adjustment

Turn the water hardness dial to the position
1 or 2 (refer to the table).

Electronic adjustment

1. Go into the option menu.

USE OF DISHWASHER SALT

How to fill the salt container:

1. Turn the cap counterclockwise and
open the salt container.

2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).

3. Use the funnel to fill the salt container
with salt.

4. Remove the salt around the opening of
the salt container.

5. Turn the cap clockwise to close the salt
container.

It is correct that water comes out from
the salt container when you fill it with
salt.

2. Go to Settings . Press the OK button to
confirm.

3. Go to Water hardness . Press the OK
button to confirm.

4. Set the level of the water softener. Refer
to the chart for the right level to set.

5. Press the OK button to confirm.

6. Press the home button to go out of the
menu.

If the water softener is set electronically
to the level 1, the salt indicator mes­sage stays off.

The display shows a message when
the salt container is empty.
The message does not show while a
washing programme operates.
After you fill the salt container, the mes­sage can continue to stay on for some
hours. This does not have an unwanted
effect on the operation of the appli­ance.

20

30

M

A

X

1

2

3

4

+

-

10 electrolux

USE OF DETERGENT AND RINSE AID

1

2

7

Use of detergent

To help the environment, do not use
more than the correct quantity of deter­gent.
Obey the instructions on the detergent
packaging.

How to fill the detergent dispenser:

1.

Press the release button

7

lid

2.

of the detergent dispenser.

Put the detergent in the dispenser

3. If the washing programme has a pre­wash phase, put a small quantity of de­tergent on the inner part of the appli­ance door.

4. If you use the detergent tablets, put the
tablet in the detergent dispenser

5. Close the detergent dispenser. Press
the lid until it locks into position.

Use long washing programmes when
you use the detergent tablets. These

3

4

6

2

to open the

Use of rinse aid

Do these steps to fill the rinse aid dispens­er:

1.

2.

5

3. Remove the spilled rinse aid with an ab-

4. Close the rinse aid dispenser. Press the

Adjust the rinse aid dosage

Factory set: position 3.
You can set the rinse aid dosage between

1

position 1 (lowest dosage) and position 4

.

(highest dosage).
Turn the rinse aid selector

decrease the dosage.

1

.

cannot fully dissolve with short washing
programmes and can decrease the
washing results.

Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.

6

Press the release button

5

of the rinse aid dispenser.

lid
Fill the rinse aid dispenser

to open the

3

with rinse
aid. The mark 'max' shows the maxi­mum level.

sorbent cloth to prevent too much foam
during the washing programme.

lid until it locks into position.

4

to increase or

The display shows a message when
the rinse aid dispenser is empty
The message does not show while a
washing programme operates.

MULTITAB FUNCTION

The multitab function is for combi detergent
tablets.
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
Do a check if these tablets are applicable
for the local water hardness. Refer to the in­structions from the manufacturer.
When you set the multitab function, it stays
on until you deactivate it.

The multitab function deactivates the flow
of rinse aid and salt.
The multitab function deactivates the salt
and the rinse aid messages.
The programme duration can increase if
you use the multitab function.

electrolux 11

Activate the multitab function before
the start of a washing programme.
You cannot activate the multitab func­tion when the programme operates.

To activate the multitab function

• Go to the option menu and activate the
multitab function. Refer to 'Control pan­el'.

To deactivate the multitab function and use
separately detergent, salt and rinse aid:

1. Go to the option menu and deactivate

the multitab function. Refer to 'Control
panel'.

LOADING CUTLERY AND DISHES

Refer to the leaflet 'Examples of Real­Life loads'.

Hints and tips

• Do not put in the appliance items that
can absorb water (sponges, household
cloths).

• Remove the remaining food from the
items.

• Make soft the remaining burned food on
the items.

• Put hollow items (cups, glasses and
pans) with the opening down.

• Make sure that water does not collect in
containers or in bowls.

2. Fill the salt container and rinse aid dis­penser.

3. Adjust the water hardness setting to the
highest level.

4. Do a washing programme without
dishes.

5. Adjust the water softener to the water
hardness in your area.

6. Adjust the rinse aid dosage.

• Make sure that cutlery and dishes do not

bond together.

• Make sure that the glasses do not touch

other glasses.

• Put small items in the cutlery basket.

• Mix the spoons with other cutlery to pre-

vent them to bond together.

• When you put the items in the baskets,

make sure that the water can touch all
surfaces.

• Put light items in the upper basket. Make

sure that the items do not move.

• Water droplets can collect on plastic

items and non-stick pans.

SELECT AND START A WASHING PROGRAMME

Select and start a washing programme

1. Close the appliance door and switch on
the appliance.

2. Select, if necessary, options and/or the
delay start. Refer to 'Control panel'.

3. Select a washing programme. Refer to
'Washing programmes'.

4. Press the Start button. The washing
programme starts automatically.
– If the delay start is set, the countdown

starts automatically. When the count­down is completed, the washing pro­gramme starts automatically

– If the salt container and /or the rinse

aid dispenser are empty, the related
messages show in the display and
the appliance will not start. Press the
Start button again to start the wash­ing programme.

Fill the salt container and/or the rinse
aid dispenser when the appliance is
empty and before you start a washing
programme

If the delay start is set, the opening of
the appliance door interrupts the
countdown. When you close the door,
the countdown continues from the
point of interruption.

Interruption of a washing programme

• Open the appliance door.
– The washing programme stops.

• Close the appliance door.
– The washing programme continues

from the point of interruption.

12 electrolux

How to cancel a washing programme
or a delay start

If a washing programme or a delay
start has not started, you can change
the selection.
When a washing programme or a delay
start operate, it is not possible to
change the selection. It is necessary to
cancel the washing programme or the
delay start.

How to cancel a washing programme

1. Press the Start button.

2. The display shows you how to cancel
the washing programme.

Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.

How to cancel a delay start

1. Press the Start button.

2. The display shows you how to cancel
the delay start.

3. Press the Start button.
– The set washing programme auto-

matically starts.

At the end of the washing programme

• The appliance stops automatically.

• The audible signals operate.

1. The display shows a message that tells
you that the washing programme is
completed and you can switch off the
appliance.

If the salt container and /or the rinse
aid dispenser are empty, the related
messages show in the display. .

2. Switch off the appliance.

3. Open the appliance door.

4. For better drying results, keep the door
ajar for some minutes.

Auto Off

The Auto Off function automatically
switches off the appliance 10 minutes after
the end of the washing programme.
This helps to decrease energy consump­tion.

Remove the items from the baskets

• Let the dishes become cold before you

remove them from the appliance. Hot
dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and on

the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.

WASHING PROGRAMMES

Washing programmes

Programme Degree of soil Type of load Programme description

Automatic

60° Quick

70° Intensive Heavy soil Crockery, cutlery,

50° Energy

1)

2)

3)

Any Crockery, cutlery,

pots and pans

Normal or light soil Crockery and cutlery Main wash 60°C

pots and pans

Normal soil Crockery and cutlery Prewash

Prewash
Main wash 45°C or 70°C
1 or 2 middle rinses
Last rinse
Dry

Rinse

Prewash
Main wash 70°C
1 middle rinse
Last rinse
Dry

Main wash 50°C
1 middle rinse
Last rinse
Dry

electrolux 13

Programme Degree of soil Type of load Programme description

One hour Light soil Crockery and cutlery Main wash 55°C

1 middle rinse
Last rinse

45° Glass Normal or light soil Delicate crockery and

glassware

Main wash 45°C
1 middle rinse
Last rinse
Dry

Plate Warmer This programme makes the dishes warm

1 hot rinse
before use or removes the dust from dishes
not used for a long time.

Prewash This programme gives dishes a quick rinse

1 cold rinse
to prevent the remaining food to bond on
the dishes and bad odours to come out
from the appliance.
Do not use detergent with this programme.

1) The appliance adjusts automatically the temperature and the quantity of the water. This depends if the appliance
has a full load or not and on the degree of soil. The programme duration and the programme consumptions can
change.

2) When you have a light load, this programme gives a timesaving solution with perfect washing results.

3) Test programme for test institutes. Refer to supplied leaflet for test data.

Options

Programme Extra rinse

Save energy

Automatic Yes, with effect. Yes, with effect.

60° Quick Yes, with effect. Yes, without effect.

70° Intensive Yes, with effect. Yes, with effect.

50° Energy Yes, with effect. Yes, with effect.

One hour Yes, with effect. Yes, without effect.

45° Glass Yes, with effect. Yes, with effect.

Plate Warmer Yes, without effect. Yes, without effect.

Prewash Yes, without effect. Yes, without effect.

1) For programmes where the function has an effect, the energy saving is between 10% and 25%

1)

Consumption values

Programme

1)

Automatic 0,9 - 1,7 8 - 15

60° Quick 0,9 9

70° Intensive 1,4 - 1,6 13 - 15

50° Energy 0,9 - 1,0 9 - 11

One hour 1,0 - 1,2 10 - 11

45° Glass 0,8 - 0,9 11 - 12

Plate Warmer 0,8 4

Prewash 0,1 4

1) The display shows the programme duration.

The pressure and temperature of the
water, the variations of power supply

Energy (kWh) Water (litres)

and the quantity of dishes can change
these values.

14 electrolux

CARE AND CLEANING

To remove and clean the filters

Dirty filters decrease the washing results.
Although the maintenance is very low with
these filters, make a check at intervals and
if necessary, clean them.

1. Turn the filter (A) counterclockwise and

remove it out from filter (B).

B

A

2. Filter (A) has two parts. To disassemble

the filter, pull them apart.

3. Fully clean the parts with water.

4. Put the two parts of the filter (A) togeth­er and push. Make sure that they as­semble correctly in each other.

5. Remove the filter (B).

6. Fully clean the filter (B) with water.

7. Put the filter (B) to its initial position.
Make sure that it assembles correctly in
the two guides (C).

C

8. Put the filter (A) into position in filter (B).
Turn the filter (A) clockwise until it locks.

To clean the spray arms

Do not remove the spray arms.
If the holes in the spray arms become clog­ged, remove remaining parts of soil with a
thin pointed object.

To clean the external surfaces

Clean the external surfaces of the appliance
and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive
cleaning pads or solvents (acetone).

WHAT TO DO IF…

The appliance does not start or stops dur­ing operation.

Malfunction Fault code Possible cause Possible solution

The appliance does
not fill with water.

The water pressure is

• An audible signal
operates.

• The display shows a
message.

First try to find a solution to the problem (re­fer to the chart). If not, contact the service
centre.

The water tap is
closed.

too low.

Open the water tap.

Contact your local wa­ter authority.

electrolux 15

Malfunction Fault code Possible cause Possible solution

The water tap is

The filter in the water

The connection of the

The water inlet hose is

The appliance does
not drain the water.

The connection of the

The water drain hose

The anti-flood device
operates.

The programme does
not start.

The mains plug is not

Blow out fuse in the

The delay start is set. If you want to cancel

• An audible signal
operates.

• The display shows a
message.

• An audible signal
operates.

• The display shows a
message.

The appliance door is

After the check, switch on the appliance.
The programme continues from the point of
interruption.
If the malfunction shows again, contact the
service centre.
If the display shows other fault codes, con­tact the service centre.

blocked or is furred
with limescale.

inlet hose is blocked.

water inlet hose is not
correct.

damaged.

There is a blockage in
the sink spigot.

water drain hose is not
correct.

is damaged.

Close the water tap

open. The display
shows a message.

connected in.

household fuse box.

We recommend that you write the data
here:

Model (MOD.) ....................

Product number (PNC) ....................

Serial number (S.N.) ....................

Clean the water tap.

Clean the filter.

Make sure that the
connection is correct.

Make sure that the wa­ter inlet hose has no
damages.

Clean the sink spigot.

Make sure that the
connection is correct.

Make sure that the wa­ter drain hose has no
damages.

and contact the serv­ice centre.

Close the door cor­rectly.

Put in the mains plug.

Replace the fuse.

the delay start, refer to
'Select and start a
washing programme'.

The necessary data for the service centre is
on the rating plate.

16 electrolux

The washing results and drying results are not satisfactory

Problem Possible cause Possible solution

The dishes are not clean. The selected washing pro-

The baskets were not loaded

The spray arms could not turn

The filters are dirty or not as-

The quantity of detergent was

Limescale particles on the
dishes.

Incorrect water softener adjust-

The salt container cap is not

There are streaks, milky stains,
or a bluish layer on glasses and
dishes.

Dry water drop stains on
glasses and dishes.

The detergent can be the

The dishes are wet. You have set a washing pro-

The dishes are wet and dull. The rinse aid dispenser is emp-

The multitab function is on (this

gramme was not applicable for
the type of load and soil.

correctly, water did not touch
all surfaces.

freely because of incorrect ar­rangement of the load.

sembled and installed correctly.

not sufficient or missing.

The salt container is empty. Fill the salt container with dish-

ment

closed correctly.

Rinse aid dosage is too high. Decrease the rinse aid dosage.

Rinse aid dosage is too low. Increase the rinse aid dosage.

cause.

gramme without drying phase
or with a decreased drying
phase.

ty.

function automatically deacti­vates the rinse aid dispenser).

Make sure that the washing
programme is applicable for the
type of load and soil.

Load the baskets correctly.

Make sure that an incorrect ar­rangement of the load does not
cause a blockage of the spray
arms.

Make sure that the filters are
clean and correctly assembled
and installed.

Make sure that the quantity of
detergent is sufficient.

washer salt.

Adjust the water softener.

Make sure that the salt contain­er cap is closed correctly.

Use a different brand of deter­gent.

Let the door stay ajar for some
minutes before you remove the
dishes.

Fill the rinse aid dispenser with
rinse aid.

Activate the rinse aid dispense.

How to activate the rinse aid dispenser

• Go to the option menu and activate the
rinse aid dispenser. Refer to 'Control
panel'.

TECHNICAL DATA

Dimensions Width 596 mm

Height 850 mm

Depth 620 mm

Water supply pressure Minimum 0,5 bar (0,05 MPa)

electrolux 17

Maximum 8 bar (0,8 MPa)

Water supply

Capacity Place settings 12

1) Connect the water inlet hose to a water tap with a 3/4'' thread.

1)

The rating plate on the inner edge of
the appliance door shows the electrical
connection data.

Cold water or hot water maximum 60 °C

photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.

If the hot water comes from alternative
sources of energy, (e.g. solar panels,

ENVIRONMENT CONCERNS

The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will
help prevent potential negative
consequences for the environment and
human health, which could otherwise be

caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please
contact your local council, your household
waste disposal service or the shop where
you purchased the product.

Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.

INSTALLATION

Installation under a counter

Put the appliance adjacent to a water tap
and a water drain.
Remove the appliance worktop to install it
under a sink unit or a kitchen worktop.
Make sure that the dimensions of the re­cess agree with the dimensions in the pic­ture.

How to remove the appliance worktop

1. Remove the rear screws (1).

.

2. Pull the worktop from the behind of the
appliance (2).

3. Lift the worktop and move it from the
front slots (3).

18 electrolux

4. Use the adjustable feet to adjust the lev­el of the appliance.

5. Install the appliance under the kitchen
worktop. Do not squash or bend the
water hoses during the installation.

To adjust the level of the appliance

A correct level of the appliance lets the door
to close and seal correctly.
With an incorrect appliance level, the door
does catches on the sides of the cabinet.
Loosen or tighten the adjustable feet to
make the appliance level.

Water drain connection

Connect the water drain hose to:

• The sink spigot and attach it under the

work surface. This prevents that the
waste water from the sink goes back into
the appliance.

• A stand pipe with vent-hole. The internal

diameter must be minimum 4 cm.

max 85 cm

min 40 cm

max 400 cm

Remove the sink plug when the appliance
drains the water to prevent that the water
goes back into the appliance.
The drain hose extension must not be lon­ger than 2 m. The internal diameter must
not be smaller than the diameter of the
hose.
If you connect the water drain hose to a
trap spigot under the sink, remove the plas­tic membrane (A). If you do not remove the
membrane, remaining food can cause a
blockage in the drain hose spigot

A safety device impedes the dirty water
to go back into the appliance. If, the
spigot of the sink has a 'non-return
valve', this can cause the appliance to
drain incorrectly. Remove the non-re­turn valve.

electrolux 19

www.electrolux.com/shop

117935230-A-382010