Page 1
contents note
Warnings
It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to another owner, or should you move house and leave
the appliance, always ensure that the book is supplied with the appliance in order that the new owner
can be acquainted with the functioning of the appliance and the relevant warnings.
Please remove the door before you dispose your
refrigerant. This will prevent it from becoming a deathtrap for a child. Please keep the products away from
the fire or similar glowing substance before you dispose the refrigerator.
The symbol
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
This must be done before the appliance is built into.
These warns are provided in the interest of safety.
You must read them carefully before installing or using the appliance.
on the product or on its package
Page 2
Contents
General safety --------------------------------------------------------- 3
Warnings
Service/Repair --------------------------------------------------------- 3
Prior to initial start-up ----------------------------------------------- 3
Initial start-up ---------------------------------------------------------- 4
Installation --------------------------------------------------------------- 4
Name of components ----------------------------------------------- 5
Function ------------------------------------------------------------------ 6
1.Main display & control buttons ----------------------------6
2.Temperature adjustment ------------------------------------- 6
3.Holiday mode --------------------------------------------------- 6
4.Fast freeze mode ---------------------------------------------- 7
5.Default mode -----------------------------------------------------7
6.Child lock --------------------------------------------------------- 7
7.alarm ----------------------------------------------------------------7
8.Memory at power failure --------------------------------------8
Daily operation ---------------------------------------------------------8
1.Wine compartment --------------------------------------------8
2.Refrigerator -------------------------------------------------------8
3.Freezer ------------------------------------------------------------- 9
It is most important that this instruction book should be retained with the appliance for future reference. Should the
appliance be sold or transferred to another owner, or should
you move house and leave the appliance, always ensure
that the book is supplied with the appliance in order that the
new owner can be acquainted with the functioning of the
appliance and the relevant warnings.
Please remove the door before you dispose your refrigerant.
This will prevent it from becoming a death- trap for a child.
Please keep the products away from the fire or similar glowing substance before you dispose the refrigerator.
The symbol on the product or on its package indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for
the environment and human health, which could otherwise
be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Cleaning & maintenance ------------------------------------------10
Detecting & correcting malfunctions --------------------------11
1.False malfunction ---------------------------------------------11
2.Detecting & correcting malfunctions -------------------11
Technical data ----------------------------------------------------------12
This must be done before the appliance is built into. These
warns are provided in the interest of safety. You must read
them carefully before installing or using the appliance.
Page 3
General safety
This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play
with the product.
It is dangerous to alter the specifications or modify this product in any way.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
Important: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
person in order to avoid a hazard.
Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.
This appliance is heavy. Care should be taken when moving it.
Ice lollies can cause frost burns if consumed straight from the appliance.
Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent
possible fluid leakages.
The appliance must not be located close to radiators or gas cookers.
Avoid prolonged exposure of the appliance to direct sunlight.
There must be adequate ventilation round the back of the appliance and any damage to the refrigerant circuit must be
avoided.
Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances, unless they are
approved for this purpose by the manufacturer.
Please do not damage the refrigeration circuit.
Please do not touch frozen food with wet hands to avoid frost bite.
Please do not store bottled beer or other drinks with pressure in the bottle in the freezer in order to avoid burst of the
bottles.
HAZMAT like toxic, flammable and detonable material and strong acid and alkali substances (e.g., gas in lighters,
adhesive, gasoline, ethanol, thinner and so forth) must not store in the appliances.
Service/Repair
Prior to initial start-up
2
Page 4
Initial start-up
Insert plug into mains socket. Switch on and the compressor starts and the refrigeration process starts.
A temperature warning tone might sound but this is not malfunction. You may switch off the warning by pressing any
button.
A few minutes after closing the appliance doors, you will feel warm when you put your hands on the side panels. You can
feel the low temperature in the wine compartment, refrigerator and freezer after a while, which indicates that the refrigeration
system is in normal operation.
Temperature adjustment:
1> The optimal temperature is saved in the computer control board before it leaves factory. Resetting is not required if not
specifically needed.
2> Optimal temperature setting: Refrigerator C, Wine compartment +12 C, Freezer -18 C.
3> Please refer to “Temperature Adjustment” to reset the temperature.
Installation
Location
The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
Please make sure that there is a distance of no less than 10cm between the back of the appliances and the wall and
between both sides of the appliances and the wall, and no less than 30cm between the top of the appliances and the ceiling.
Please also ensure that the doors could open with an angle of more than 150 .
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic
power supply. Voltage can vary by 6% of the rated voltage. For operation with different voltage, a suitably sized autotransformer must be used.
The appliance must be earthed
The power supply cable plug is provided with a contact for this purpose.
If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current
regulations, consulting a specialist technician.
Installation
Dealer will send authorized installation person to help you install your appliances. Please do not install by yourself or by
other untrained personnel in order to avoid improper installation which might result in unnecessary damage to the appliances
or malfunctions.
The Manufacturer declines all responsibility if the above safety precautions are not observed.
This appliance complies with the following E.E.C.Directives:
-87/308 EEC of 2/6/87 relative to radio interference suppression.
-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
Page 5
Name of components
Lamp button
Wine compartment door
Aluminum alloy handle
Freezer door
Top cover
LED display
Fascia panel
Refrigerator door
Front panel
Lamp
Wire door shelf
Cleaning stick
Rotary wine bar & side rail
Rotary ice-maker
Ice-holder
Freezer drawer
Door shelf with lid
Glass shelf
Door shelf
Suspension box
Glass shelf hanger in
Half door shelf with lid
Half door shelf
Bottle shelf
Crisper
Adjustable feet
Page 6
Function
1. Main display and control buttons
Setting Manu/Holiday/Fast freeze/Auto adjustment Alarm Lock Warmer
Tempsetting Wine compartment Temp Freezer Temp Refrigerator Temp Colder
2. Temperature adjustment
The “MANU” button will be illuminated when power is on. Temperature in each compartment can be adjusted in this mode.
Press “TEMP” button, the wine compartment temperature flashes and it can be adjusted by pressing the “Warmer” and
“Colder” buttons. If the wine compartment temperature is not required to reset, keep on pressing the “TEMP” button to
choose to adjust the temperature in the other two compartments.
Press the “TEMP” button again, the wine compartment temperature will stop flashing and the ACTUAL temperature will be
illuminated. Freezer temperature will start flashing then and it can be adjusted in the same way as above.
Press the “TEMP” button again, the freezer temperature will stop flashing and the ACTUAL temperature will be illuminate.
The refrigerator temperature will start flashing then and it can be adjusted in the same way as above.
Notice:
When the buttons are not further pressed after the temperature of one compartment is adjusted, the temperature display
of that compartment will stop flashing after a short period of 5 seconds and the ACTUAL temperature in that compartment will
be displayed. Temperature adjustment can be started over again from the wine compartment on.
Temperature range: Refrigerator: 2~8°C
Wine Compartment: 6~14°C
Freezer: -21~-15°C
3. Holiday mode
It is recommended to activate “Holiday” Mode when you spend a vacation outside or store little food, because only wine
compartment and freezer work while the fridge stops under this mode. In this case, you can save some energy consumption.
The illuminated “MANU” button will go out when the “SETTING” button is pressed, and the “HOLIDAY” button will be
illuminated simultaneously. The default temperature in the wine compartment (+12°C) and freezer (-18°C) will be displayed
respectively. After a period of 5 seconds the temperature display of wine compartment and freezer will be in a normal state
while all illuminated buttons related to refrigerator will go out after the refrigerator temperature displayed “5-4-3-2-1”, and the
refrigerator is then switched off while the wine compartment and the freezer are running with the default temperature. If you
press the “TEMP” button in this mode, the default temperature will be displayed but can not be changed.
Press “SETTING” button in this mode, the next mode “Fast freeze” starts while the previous mode is ended. Refrigerator
temperature will be displayed and the refrigerator will restore to normal operation with the previously set temperature.
7
Page 7
It is recommended to activate “Super-freezing” Mode when you store big amount of warm food at the same time, which can
make food pass a big temperature scale (-1 ~ -5 quickly) for ice building-up and reach frozen point to store. In this way,
we can avoid nutrition loss maximumly while keep the freshness and nutrition of stored food.
If you press the “SETTING” button in the “Holiday mode”, the illuminated “HOLIDAY” button will go out while the “FAST”
button will be illuminated. The appliances start running in the Fast freeze mode. The Fast freeze mode will be ended
automatically after 48 hours running and the combination fridge-freezer will run with the previously set temperature.
The freezer temperature can not be adjusted in the “Fast freeze” mode. Press “TEMP” button, the temperature display will
switch over between the wine compartment and the refrigerator and temperature in the two compartments can be adjusted.
The If you press the “SETTING” button when the “Fast freeze” mode is in operation, it will be automatically ended and the
next mode “Default mode” will be in operation.
Before storing fresh food in the freezer, allow the combination fridge-freezer in operation in the “Fast freeze” mode for a
while.
This is the best running mode of refrigerator, which fixed the temperature setting for three compartments. So it is
recommended to take this mode for your daily use.
If you press the “SETTING” button when the “Fast freeze” mode is in operation, the illuminated “FAST” button will go out
and the “STD.” Button will be illuminated. The default temperature (Wine compartment +12°C, Wine compartment +5°C,
Freezer –18°C) will be displayed for 5 seconds before the normal temperature display starts. In this mode, the default
temperature can be displayed but not be changed if the “TEMP” button is pressed.
If you press the “SETTING” button when the Default mode is in operation, it will be ended and the next mode “Temperature
adjustment” will be in operation.
If the “Warmer” and “Colder” buttons are pressed and held for 3 seconds simultaneously, the “LOCK” button will be
illuminated with all buttons being locked and no further adjustment available. If the “Warmer” and “Colder” buttons are pressed
and held for another 3 seconds, the illuminated “LOCK” button will go out with all buttons unlocked.
(1) Open-door warning
When any door of the combination fridge-freezer is open for more than 3 minutes, a warning tone from the beeper will
sound. The warning will be switched off if you press any key at that moment. If the door is still open after 3 minutes, the
beeper starts warning again.
(2) Temperature warning
When the refrigerator temperature rises up to +12°C or higher, or the wine compartment temperature rises up to +19°C or
higher, the “ALARM” button is illuminated and starts flashing. The “ALARM” flash will stop if the refrigerator temperature falls
to +11°C or lower, the wine compartment temperature falls to +18°C or lower and, there is no freezer temperature warning.
When the freezer temperature rises up to –11°C or higher, the “ALARM” button flashes and sends out alarm beeping.
1. The beeper will stop alarming if any button is pressed. But “ALARM” indicator will keep flashing until the freezer tempera-
ture falls to or lower than -12°C
2. If no button is pressed, the freezer temperature falls down to:
A. Between -11°C and the highest temperature reached before, the beeper will stop alarming (If the beeper keeps beeping)
when any button is pressed. Then freezer will resume normal display after show the warmest value in record for 5 seconds,
while “ALARM” indicator keeps flashing until freezer temperature falls to or lower than -12°C.
B. -12°C or lower, the beeper will stop alarming (If the beeper keeps beeping) when any button is pressed. Then freezer will
resume normal display after show the warmest value in record for 5 seconds. If there is no temperature warning from the wine
compartment or the refrigerator, “ALARM” stops flashing.
Notice:
1. If no button is pressed, the beeper will stop alarming after 10 minutes.
2. If no button is pressed, the “ALARM” indicator will keep flashing even the temperature falls down to or lower than -12°C.
7
Page 8
When a power failure occurs, operation mode before the power failure will be memorized and it will be resumed when the
power supply is restored. The ender user could also reset the operation mode as needed.
Daily operation
<1>Wine compartment
Mainly for storage of wine, drinks, fruits and so forth.
Temperature is adjustable between +6°C and +14°C.
<2> Control of wine compartment lamp
There is a control button on the door of the wine compartment. The lamp inside can be
switched on and off when the wine compartment door is either open or closed. If the user
forget to switch off the lamp, it will go out automatically 20 minutes later.
<3> Using and disassemble the accessories
Rotary wine bar:
It is placed on the holder and is rotary. It can be simply take out.
Wave wine shelf:
For storage of various wines and bottled drinks.
The position of the wine shelf is adjustable. It can be pulled out by tilting its back upwards.
Wire door shelf:
For storage of small bottled drinks and bagged drinks.
<1> Refrigerator
Mainly for storage of vegetables and fruits for a short period.
Temperature is adjustable between +2°C and +8°C.
Storage of food is suggested to be sorted to keep the food fresh optimally and to make a
best use of the storage space.
<2> Using and disassemble the accessories
Shelf in the refrigerator
The shelf is adjustable for a convenient storage of foods of different sizes. It can be pulled
out by tipping its back up.
8
Page 9
Suspension box
The suspension box is for storage of bits and pieces with its height adjustable. It can be
removed by pulling it forward and tipping it up.
Crisper
For storage of vegetables, fruits and so forth. It can be removed by pulling it
forward and tipping it up.
Damp-keeping crisper holder
Damp-keeping device on the crisper holder can be adjusted to adjust the damp in the
crisper.
Bottle fixer
For fixing bottles and to prevent bottles from falling and collision.
The bottle fixer position can be adjusted as required.
The bottle fixer can be removed by rotating it along its side. It can be reloaded via a
reverse operation.
Door shelf and bottle shelf
For storage of eggs, various canned food and other bits and pieces.
It can be removed by tipping it up.
<1>
Mainly for freezing food, storage of frozen food and ice making.
Temperature is adjustable between –15°C and –21°C.
Storage of meat and fish which needs to be kept for a long period, please refer to the
storage instruction from the food pack or specialized refrigeration manual for the storage
time.
Fresh food to be stored in the freezer is not supposed to exceed the freezing capacity
(12kg).
Ice making can be accelerated by activating the “Fast freeze” mode.
<2> Ice making
To remove the icemaker, pull it forward and tip it up.
Fill the icemaker 4/5 full with cooled boiled water or other drinks and
place it on the freezer hanger.
To collect the ice cubes, rotate the icemaker clockwise and the cubes will fall into the
ice holder. Pull the ice holder outwards and the ice is available then.
<3> Using and disassemble the accessories
Freezer drawer
Pull the drawer forward and tip it up a bit, it will be removed.
Ice holder
For storage of ice cubes. Pull it forward and tip it up, it will be removed. It can not be used
as icemaker.
Page 10
Cleaning and maintenance
1.Defrosting
The freezer, refrigerator and wine compartment are all automatically defrosted. The melted water collects at the back wall of
the refrigerator and flows into the catch tray at the top of the compressor and evaporates through the heat generated by the
compressor.
2. Cleaning
The appliances should be cleaned regularly to avoid unpleasant odours.
Unplug the appliances.
Clean the applianceswith a soft cloth and lukewarm water or litmusless cleanser. After cleaning wipe with dry cloth and rub
dry.
Notice:
Never wash the appliance exterior with water in order not to affect its insulation performance. Never clean the appliances
with boiled water, abrasive cleaning agents, acid, alkali, gasoline, benzene, acid cleanser, hard brush and so forth.
Never use a mechanical device or by other means to accelerate the defrosting.
3.Cleaning the drainage hole
The humidity in summer is high. With the refrigerator door being frequently opened, there is relatively more water from
defrosting. Vegetable leaves, packing bags and other residues sometimes flow into the drainage hole with the melted water,
which will block up the drainage hole easily. Please clean the drainage hole regularly as a result.
To clean the drainage hole, put the cleaning stick into the drainage hole, turn around and pull repeatedly to clean
thoroughly.
Leave the cleaning stick in the drainage hole to prevent bulky item from jamming the drainage hole.
4. Cleaning the gasket
Pull the gasket upward from a corner and pull the whole of it from around.
Clean the gasket with litmusless cleanser, rub it dry with dry cloth or dry it in shades;
To replace the gasket, embed the four corners into the groove first, then press the whole of it back into the groove from both
ends.
Notice:
Please do not embed the gasket from the middle because this will outstretch it and make it hard to be replaced.
5. The method for replacing illuminating lamps:
Unplug the appliance first. Press the bayonet at the front of the lamp cover
and pull down the lamp cover.
Hold the end of the bulb and pull the old bulb out.
Put the new bulb on (5W fluorescent bulb) and place the cover again.
Notice: Be sure to disconnect power supply before you change bulb.
12
6. Switching the appliances off
It is suggested to keep the appliances in operation even though there is no food in store; otherwise the service life of the
appliances will be shortened.
If the appliances are to be kept idle for a long period of time, please cut off the power supply, clean the appliances following
the above instructions, dry them in the air and place it in a dry and ventilated room.
Please leave a gap between the two cabinets in order to avoid the gasket sticking to the cabinet and mildew.
10
Page 11
Detecting & correcting malfunctions
1. False Malfunction
The followings are normal:
Bubbling or splashing noises in the appliances:
This happens when refrigerant flows into thin tubes.
Frost at the back of the refrigerator interior:
This is because the refrigeration pipeline clings to the back of the refrigerator interior. When the compressor starts, the
temperature in this compartment is lower than 0 C. Frost comes into being as a result but automatic defrosting will
happen when the compressor stops running.
The freezer door frame feels warm:
This is to prevent the freezer door from fogging and being frozen.
The side panels and the back panel of the appliances feels warm:
The average temperature of the heat emission condensers on the side and back panels is around 55 C when the appliances are in operation.
The appliances make noise of cracking
There is sharp temperature fluctuation when the appliances are switched on or off, which resulted in expanding and
shrinking of materials to different extents, hence shift of materials between each other.
The compressor heats up:
The compressor temperature could reach as high as 90 C when it runs.
There is foggy coagulation on the exterior of the appliances:
It is because of the high humidity and it would be fine to just wipe the fog off.
The appliances make noise of clatter:
It is normal when the solenoid valves magnetize.
2. Detecting and correcting malfunctions
If the appliances are not in normal operation, please check the following before turning to the service agent:
(You are supposed to pay for the service if your appliances are out of the warranty period.
The combination fridge-freezer stop running.
If the plug is properly connected with the socket.
If the power is cut off or if the fuse has blown.
If the power supply is restored within 5 minutes after a power failure.
Both the freezer and the refrigerator are not in operation
If the electrical connection between the two cabinets is defective.
The compressor keeps in operation without a break
If the temperature in the freezer, wine compartment or refrigerator has been set too low.
If the door(s) has(have) been closed properly.
If there is any heat source or direct sunshine nearby.
If the foods stored inside have been too much which has affected the cold air circulation.
you have put food which is too warm to be stored in the appliances.
The temperature of stored food is not satisfying
If there has been too much food stored.
If the door(s) is(are) properly closed or been opened too frequently.
If the appliances are near any hot source.
If the temperature has been set too high.Food is frozen in the refrigerator
If the refrigerator temperature has been set too low.
If the easy-to-be-frozen food has been placed close to the back of the refrigerator interior.
11
Page 12
Big noise
If the packing chassis has been dismounted.
If the appliances are placed level and stable.
If the back of the appliances has touched the wall.
Notice:
Frequent alarm
If you have pressed any key to switch off the warning.
If the door(s) has(have) been properly closed.
Notice:
If your appliances are still not in normal operation other than the checking and correction following the above instructions,
please contact the authorized Service Center.
Technical data
Product series Dragon
Freezer position Bottom
Freezing capacity (kg/24h) 12
Exterior size (mm)/(WxDxH) 999x644x1768
Blowing gas Cyclopentan
Electric shock proof Class 1
Notice: the Technical data is based on measurement under standard circumstances. Please refer to the data plate for any
change.
12
Loading...