Page 1
user manual
Refrigerator
ERE38403W
ERE38403X
ERE38407W
ERE38407X
Page 2
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Control panel 4
First use 6
Daily use 6
Helpful hints and tips 8
SAFETY INFORMATION
In the interest of your safety and to ensure
the correct use, before installing and first using the appliance, read this user manual
carefully, including its hints and warnings. To
avoid unnecessary mistakes and accidents,
it is important to ensure that all people using
the appliance are thoroughly familiar with its
operation and safety features. Save these instructions and make sure that they remain
with the appliance if it is moved or sold, so
that everyone using it through its life will be
properly informed on appliance use and safety.
For the safety of life and property keep the
precautions of these user's instructions as
the manufacturer is not responsible for damages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door to prevent playing children to suffer electric shock or to
close themselves into it.
• If this appliance featuring magnetic door
seals is to replace an older appliance having a spring lock (latch) on the door or lid,
be sure to make that spring lock unusable
Care and cleaning 9
What to do if… 10
Technical data 13
Installation 13
Environmental concerns 17
Subject to change without notice
before you discard the old appliance. This
will prevent it from becoming a death trap
for a child.
General safety
Caution! Keep ventilation openings
clear of obstruction.
• The appliance is intended for keeping
foodstuff and/or beverages in a normal
household as explained in this instruction
booklet.
• Do not use a mechanical device or any artificial means to speed up the thawing
process.
• Do not use other electrical appliances
(such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable.
During transportation and installation of
the appliance, be certain that none of the
components of the refrigerant circuit become damaged.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of igni-
tion
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications or
modify this product in any way. Any damage to the cord may cause a short-circuit,
fire and/or electric shock.
Page 3
electrolux 3
Warning! Any electrical component
(power cord, plug, compressor) must be
replaced by a certified service agent or
qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged power plug may overheat and
cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
6. You must not operate the appliance
without the lamp cover1) of interior
lighting.
• This appliance is heavy. Care should be
taken when moving it.
• Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.
•
Bulb lamps2) used in this appliance are
special purpose lamps selected for household appliances use only. They are not
suitable for household room illumination.
Daily use
• Do not put hot pot on the plastic parts in
the appliance.
• Do not store flammable gas and liquid in
the appliance, because they may explode.
• Appliance's manufacturers storage recommendations should be strictly adhered
to. Refer to relevant instructions.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
• Do not clean the appliance with metal objects.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary,
clean the drain. If the drain is blocked, wa-
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If a water connection is foreseen
ter will collect in the bottom of the appliance.
Installation
Important! For electrical connection
carefully follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if there
are damages on it. Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
• Adequate air circulation should be around
the appliance, lacking this leads to overheating. To achieve sufficient ventilation
follow the instructions relevant to installation.
• Wherever possible the back of the product
should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close
to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
•
Connect to potable water supply only.
3)
Service
• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine
spare parts must be used.
Page 4
4 electrolux
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. The appliance shall not be discarded together with the urban refuse
and rubbish. The insulation foam contains flammable gases: the appliance
shall be disposed according to the applicable regulations to obtain from your
local authorities. Avoid damaging the
cooling unit, especially at the rear near
the heat exchanger. The materials used
on this appliance marked by the symbol
are recyclable.
CONTROL PANEL
A - Appliance button ON/OFF D - Function button
B - Temperature regulation button E - Confirmation button
C - Temperature and function indicator
Display
Temperature alarm and door open
alarm (some models)
Positive Temperature sign Eco Mode is activated
Temperature Quick Chill is activated
Child Lock is activated
Switching on
Insert the plug into the power outlet. If the
display is not illuminated, press button (A), to
start the appliance.
For optimal food storage select the Eco
Mode and the temperature is set to +5°C in
the fridge.
To select a different temperature refer to
"Temperature regulation".
Important! If the door remains open for
some minutes, the light will turn off automatically. The light is reset by closing and opening the door itself.
Shopping mode is activated
Switching off
The appliance is shut off by pressing button
(A) until a countdown from -3 -2 -1 is completed.
Temperature regulation
The temperature may be changed by pressing the button (B).
The current temperature setting flashes and
by pressing button (B) again the set temperature is possible to change in steps of one
degree.
After some seconds the storage temperature
is shown again.
The selected-temperature will be reached
within 24 hours.
Page 5
electrolux 5
Important! At start up the displayed temperature don’t correspond with the set temperature until stabilized (within 24 hours).
Functions Menu
By activating the key (D) the functions menu
is operating.
Each function could be confirmed by pressing button (E). If there is no confirmation after
some seconds the display will go out from
the menu and return in normal condition.
The following functions are indicated:
Child Lock function
Shopping function
Eco Mode function
Quick Chill function
Child Lock Function
The Child Lock function is activated by
pressing key (D) (several times if necessary)
until the corresponding icon appears
.
You must confirm the choice by pressing key
(E) within few seconds. You will hear the buzzer and the icon remains lighted. In this condition any possible operation through the
keys does not cause any change as long as
this function is activated.
It is possible to de-activate the function at
any time by pressing key (D) until the corresponding icon will flash and then key (E).
Shopping Function
If you need to insert a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the Shopping function to chill the products more rapidly and to avoid warming the other food
which is already in the refrigerator.
The Shopping function is activated by pressing key (D) (several times if necessary) until
the corresponding icon appears
. You
must confirm the choise by pressing key (E)
within few seconds. You will hear the buzzer
and the icon remains lighted.
The Shopping function shuts off automatically after approximately 6 hours. It is possible to de-activate the function at any time by
pressing key (D) until the corresponding icon
will flash and then key (E).
Eco Mode Function
The Eco Mode function is activated by pressing key D (several times if necessary) until the
corresponding icon appears (or setting
the temperature at +5°C).
You must confirm the choice by pressing key
E within few seconds. You will hear the buzzer and the icon remains lighted.
In this condition the chosen temperatures are
automatically set (+ 5°C), in the best conditions for storing food.
It is possible to de-activate the function at
any time by changing the selected temperature in the compartment.
Quick Chill function
The Quick Chill function provide rapid cooling
of cans and bottles through cold airstream.
Put the cans/bottles on the Quick Chill bottle
holder and open the air lever (1) towards
maximum.
The Quick Chill function is activated by pressing button (D) repeatedly until the corre-
sponding icon appears .
Confirm selection by pressing button (E), and
you will hear the buzzer and the icon remains
lit.
The Quick Chill function stops automatically
after approximately 6 hours.
When the cooling is finished return the air
lever (1) towards minimum.
To cancel the function at any time, press button (D) repeatedly until the desired icon flash-
Page 6
6 electrolux
es. Confirm cancellation by pressing button
(E).
The Quick Chill bottle holder can be removed
if not used.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
FIRST USE
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brandnew product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Check that the drain hose at the rear of the
cabinet discharges into the drip tray.
•
flashing icon
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm phase, the buzzer can be
switched off by pressing button (E).
DAILY USE
Use of the fridge compartment
The temperature of this compartment may
be regulated between +2°C and +8°C.
During normal functioning the indicator
shows the temperature inside the fridge.
A medium setting is generally the most
suitable.
The exact setting should be chosen keeping
in mind that the temperature inside the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is
high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures,
it may run continuously causing frost to form
on the rear wall. In this case the Temperature
regulator must be set to a higher temperature
to allow automatic defrosting and therefore
reduced energy consumption.
Holiday Function H
The Holiday function sets the temperature at
approx +15°C. This function allows you to
keep the refrigerator shut and empty during
a long holiday period ( e. g. the summer holidays) without the formation of a bad smell.
The Holiday Function H may be regulated by
pressing the key B. By pressing the key B the
current temperature setting flashes on the indicator. Press the key B again. When on the
display appears the letter H confirm the
choice of the temperature or by pressing the
key E, (you will hear the buzzer) or by waiting
for some seconds (you will not hear the buzzer).
Now the refrigerator is in the Holiday function
in the energy- saving mode and the indicator
shows the letter H. It is possible to de-acti-
Page 7
electrolux 7
vate the function at any time by changing the
selected temperature in the compartment.
Warning! The fridge compartment must
be empty with Holiday function on.
Taste Guard Filter
Your appliance is equipped with a carbon filter behind the air lever flap.
The filter purifies the air from unwanted
odours in the fridge compartment preserving
food quality.
On delivery the filter is in a plastic bag. Refer
to "Installation of the Taste Guard filter" for
instructions.
Important! Make sure that the air lever flap
is closed to obtain proper function.
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
Some shelves must be lifted up by the rear
edge to enable them to be removed.
Important! Do not move the glass shelf
above the vegetable drawer to ensure
correct air circulation.
All parts inside the drawer can be removed
for cleaning purposes.
Bottle rack
Place the bottles (with the opening facing
front) in the pre-positioned shelf.
Important! If the shelf is positioned
horizontally, place only closed bottles.
This bottle holder shelf can be tilted in order
to store previously opened bottles. To obtain
this result, pull the shelf up so it can rotate
upwards and be placed on the next higher
level.
Vegetable Drawer
The drawer is suitable for storing fruit and
vegetables.
Some models have a separator inside the
drawer that can be placed in different positions to allow for the subdivision best suited
to personal needs.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at
different heights.
To make these adjustments proceed as follows:
gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
Important! Do not move the lower door shelf
to ensure correct air circulation.
Page 8
8 electrolux
HELPFUL HINTS AND TIPS
Hints for energy saving
• Do not open the door frequently or leave it
open longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature and the appliance is fully loaded,
the compressor may run continuously,
causing frost or ice on the evaporator. If
this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liq-
uids in the refrigerator
• do cover or wrap the food, particularly if it
has a strong flavour
• position food so that air can circulate freely
around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
Cooked foods, cold dishes, etc..: these
should be covered and may be placed on any
shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the special
drawer(s) provided.
Butter and cheese: these should be placed
in special airtight containers or wrapped in
aluminium foil or polythene bags to exclude
as much air as possible.
Milk bottles: these should have a cap and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Hints for temperature inside the fridge
• A suitable temperature inside the fridge is
approx. +5° C. When the temperature regulator is set to +5° C this represents the
mean temperature in the fridge. It is normal
with higher temperature in the top of the
fridge. If the temperature regulator is set to
a cold temperature, the ambient temperature is high or if the fridge is fully loaded the
compressor will run for a longer time. If too
cold, change to a higher temperature setting.
Important! Do not place food against or
close to the temperature sensor. This can
result in too cold temperatures.
• If you want to check the temperature of
food stored in the refrigerator, place a
glass of water centrally in the cabinet, and
put a proper thermometer with an accuracy of +/– 1 °C into it. After 6 hours the
temperature can be monitored. The meas-
Page 9
uring shall be performed under steady-stated conditions (without changing the load).
CARE AND CLEANING
Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in
its cooling unit; maintenance and recharging must therefore only be carried
out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance with
a brush or a vacuum cleaner. This operation
will improve the performance of the appliance and save energy consumption.
Important! Take care of not to damage the
cooling system.
Important! When moving the cabinet, lift it
by the front edge to avoid scratching the
floor.
electrolux 9
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason use a soft cloth rinsed in warm water
and neutral soap emulsion for cleaning external surfaces.
Important! Do not use detergents or
abrasive paste as these will damage the
paint, or stainless steel anti finger print
coating.
After cleaning, reconnect the equipment to
the mains supply.
Replacing the Taste Guard filter
To get the best performance the Taste Guard
filter once every year.
New active filters can be purchased from
your local dealer.
Refer to "Installation of the Taste Guard filter"
for instructions.
Cleaning the ventilation grille
The ventilation grille can be removed for
washing.
Make sure the door is open and then:
1. Loosen the upper edge of the grille by
pulling outward/downward.
2. Pull the grille straight out to completely
remove it.
3. Vacuum clean under the cabinet.
Page 10
10 electrolux
Defrosting the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
every time the motor compressor stops, during normal use. The defrost water drains out
through a drain hole into a special container
at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator compartment channel to prevent the
water overflowing and dripping onto the food
inside.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
1. disconnect the appliance from electricity
supply
2. remove all food
3. defrost and clean the appliance and all
accessories
4. leave the door/doors open to prevent unpleasant smells.
Important! If the cabinet will be kept on, ask
somebody to check it once in a while to
prevent the food inside from spoiling in case
of a power failure.
WHAT TO DO IF…
During operation of the appliance some
smaller but annoying trouble can often occur,
which does not require calling a technician
out. In the following chart information is given
about them to avoid unnecessary charges on
service.
Important! The operation of the appliance
goes with certain sounds (compressor and
circulating sound). This not means a trouble,
but a normal operation.
Important! The appliance operates
discontinuously, so the stopping of
compressor does not mean being no
current. That is why you must not touch the
electrical parts of the appliance before
breaking the circuit.
Page 11
electrolux 11
Problem Possible cause Solution
The appliance is noisy.
The spacers located between the
The buzzer sounds. The
Alarm light flashing.
upper or lower square
is shown in the temperature display.
The compressor runs
continuously.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
The food temperature is too high. Let the food temperature decrease
The room temperature is too
Water flows on the rear
plate of the refrigerator.
Water flows inside the refrigerator.
Food prevent that water flows in-
Water flows on the
ground.
There is too much frost
and ice.
The door is not closed correctly. Refer to "Closing the door".
The Temperature regulator may
The temperature in the
appliance is too low.
The temperature in the
appliance is too high.
The door is not closed correctly. Refer to "Closing the door".
The food temperature is too high. Let the food temperature decrease
The temperature in the refrigeration is too high.
The appliance is not supported
properly.
back of the cabinet and the pipes
come loose.
The door is not closed correctly. Refer to "Door open alarm".
An error has occurred in measuring the temperature
The Temperature regulator may
be set incorrectly.
frequently.
high.
During the automatic defrosting
process, frost defrosts on the rear
plate.
The water outlet is clogged. Clean the water outlet.
to the water collector.
The melting water outlet does not
flow in the evaporative tray above
the compressor.
Food are not wrapped properly. Wrap the food better.
be set incorrectly.
The Temperature regulator may
be set incorrectly.
The Temperature regulator may
be set incorrectly.
There is no cold air circulation in
the appliance.
Check if the appliance stands stable (all feet and wheels should be
on the floor). Refer to "Levelling".
Put them back in place again.
Call your service representative
(the cooling system will continue to
keep food products cold, but temperature adjustment will not be
possible)
Set a warmer temperature.
Do not keep the door open longer
than necessary.
to room temperature before storage.
Decrease the room temperature.
This is correct.
Make sure that food do not touch
the rear plate.
Attach the melting water outlet to
the evaporative tray.
Set a higher temperature.
Set a higher temperature.
Set a lower temperature.
to room temperature before storage.
Make sure that there is cold air circulation in the appliance.
Page 12
12 electrolux
Problem Possible cause Solution
Large quantities of food to be
The appliance does not
operate.
The mains plug is not connected
The appliance has no power.
The lamp does not work.
The lamp is defective. Refer to "Replacing the lamp".
Door interferes with ventilation grill.
Misaligned door.
cooled were put in at the same
time.
The appliance is switched off. Switch on the appliance.
to the mains socket correctly.
There is no voltage in the mains
socket.
The door has been open to long. Close the door.
The appliance is not levelled. Refer to "Levelling".
The appliance is not levelled. Refer to "Levelling".
Insert smaller quantities of food to
be cooled at the same time.
Connect the mains plug to the
mains socket correctly.
Connect a another electrical appliance to the mains socket. Check
fuse. Contact a qualified electrician.
As much as the advice does not lead to result, call the nearest brand-mark service.
Replacing the lamp
1. Disconnect the appliance from the power
socket.
2. Disassemble the lamp by using a screwdriver in the recess on the lamp insert.
3. Assemble a new lamp by guiding it into a
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
centred position and press until it snaps.
Use a halogen bulb of the same type and
specifically designed for household appliances, maximum rating of 20 W
4. Reconnect the appliance.
Page 13
TECHNICAL DATA
ERE38403W
ERE38403X
Dimension
Height 1800 mm 1800 mm
Width 595 mm 595 mm
Depth 623 mm 623 mm
The technical information are situated in the
rating plate on the internal left side of the appliance and in the energy label.
ERE38407W
ERE38407X
INSTALLATION
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the climate class indicated on the rating plate of the
appliance:
Climate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Location
To ensure best performance, if the appliance
is positioned below an overhanging wall unit,
the minimum distance between the top of the
cabinet and the wall unit must be at least 40
mm . Ideally, however, the appliance should
not be positioned below overhanging wall
units.
If the cabinet is placed in a corner and the
side with the hinges facing the wall, the distance between the wall and the cabinet must
be at least 150 mm to allow the door to open
enough so that the equipment can be removed.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top cupboard must be at least 50 mm deep.
Ambient temperature
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
electrolux 13
Page 14
14 electrolux
Removing the transport support
Your appliance is equipped with transport
support to secure the door during transportation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
Spacers
Install the spacers provided within the accessory bag as shown in the figures.
When two appliances are placed beside
each other, attach the adhesive spacers between the appliances.
Removing the shelf holders
Your appliance is equipped with shelf retainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
Install the spacers on the back side of the
panel.
Page 15
Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet using the adjustment spanner supplied.
Installation of the Taste Guard filter
The Taste Guard filter is an active carbon filter
which absorbs bad odours maintain the best
flavour and aroma for all foodstuffs without
risk of odour cross contamination.
On delivery the carbon filter is in a plastic bag
to preserve performance.
1. Open the air lever flap.
electrolux 15
4. Close the air lever flap.
Important! The filter should be handled
carefully so fragments do not loosen from the
surface.
Make sure that the air lever flap is closed to
obtain proper function.
Door reversibility
To change the opening direction of the door,
do these steps:
1. Remove the plug from the power socket.
2. Remove the ventilation grille. Remove
the filling and install it on the opposite
side of the grille.
3. Lay the appliance back side down on a
wooden support.
4. Unscrew and remove the front cover (a).
5. Unscrew the hinge pin (b) and remove
the door.
6. Remove the two covers on the roof (c).
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot found in the back
of the air lever flap.
Page 16
16 electrolux
7. Remove the cover on the front (d).
8. Unscrew and move the door stopper (e)
to the opposite side.
9. Unscrew and move the hinge (f) to the
opposite side.
11. Remove the door closing device on the
door (h1). Screw on the door closing device provided within the accessory bag
on the opposite side (h2).
10. Unscrew the lower hinge (g1). Remove
the door closing device from the hinge
and move the pin to the other side.
Screw on the door closing device provided within the accessory bag (g2).
Screw on the lower hinge on the opposite side.
12. Reassembly the door.
13. Screw on the hinge pin (b) on the opposite side.
14. Reassembly the covers (c) and (d) and
the front cover (a).
15. Raise the appliance and install the ventilation grille.
16. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle. Fit the handle on to the opposite
side by turning it one half circle.
Install the hole covers provided within the
accessory bag.
Page 17
ENVIRONMENTAL CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
electrolux 17
17. Put the cabinet in position.
Warning! Reposition, level the
appliance, wait for at least four hours
and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning! If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Page 18
18 electrolux
Page 19
electrolux 19
Page 20
www.electrolux.com/shop
298376861-02-08042010
Loading...