AEG ERE38202X, ERE38202W User Manual

Page 1
user manual
Fridge
ERE38202W
ERE38202X
Page 2
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2 Control panel 4 First use 5 Daily use 5 Helpful hints and tips 6
SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first us­ing the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these in­structions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safe­ty. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for dam­ages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or in­struction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from chil­dren. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent play­ing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door seals is to replace an older appliance hav­ing a spring lock (latch) on the door or lid, be sure to make that spring lock unusable
Care and cleaning 7 What to do if… 8 Technical data 10 Installation 10 Environmental concerns 14
before you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
Caution! Keep ventilation openings
clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet.
• Do not use a mechanical device or any ar­tificial means to speed up the thawing process.
• Do not use other electrical appliances (such as ice cream makers) inside of re­frigerating appliances, unless they are ap­proved for this purpose by the manufac­turer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is con­tained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nev­ertheless flammable. During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit be­come damaged. If the refrigerant circuit should become damaged: – avoid open flames and sources of igni-
tion
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications or modify this product in any way. Any dam­age to the cord may cause a short-circuit, fire and/or electric shock.
Page 3
electrolux 3
Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or dam­aged power plug may overheat and cause a fire.
3. Make sure that you can come to the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the lamp cover1) of interior
lighting.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abra­sions or frost/freezer burns.
• Avoid prolonged exposure of the appli­ance to direct sunlight.
Bulb lamps2) used in this appliance are special purpose lamps selected for house­hold appliances use only. They are not suitable for household room illumination.
Daily use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance, because they may explode.
• Appliance's manufacturers storage rec­ommendations should be strictly adhered to. Refer to relevant instructions.
Care and cleaning
• Before maintenance, switch off the appli­ance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal ob­jects.
• Regularly examine the drain in the refriger­ator for defrosted water. If necessary, clean the drain. If the drain is blocked, wa-
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If a water connection is foreseen
ter will collect in the bottom of the appli­ance.
Installation
Important! For electrical connection
carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the ap­pliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to over­heating. To achieve sufficient ventilation follow the instructions relevant to installa­tion.
• Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, con­denser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessi­ble after the installation of the appliance.
Connect to potable water supply only.
3)
Service
• Any electrical work required to do the serv­icing of the appliance should be carried out by a qualified electrician or competent per­son.
• This product must be serviced by an au­thorized Service Centre, and only genuine spare parts must be used.
Page 4
4 electrolux
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be dis­carded together with the urban refuse and rubbish. The insulation foam con­tains flammable gases: the appliance
CONTROL PANEL
1 Alarm light 2 Pilot light 3 Quick Chill button
Alarm reset button
4 Quick Chill light 5 Temperature regulator
Switching on
Insert the plug into the wall socket. The Pilot Light will light up. Turn the Temperature Regulator clockwise to a medium setting.
Important! If the door remains open for some minutes the light will turn off automatically. The light is reset by closing and opening the door.
Switching off
To turn off the appliance, turn the Tempera­ture regulator to the "O" position.
Important! The Pilot light stay ON until the appliance is disconnected from the power socket.
Temperature regulation
The temperature is automatically regulated. To operate the appliance, proceed as fol­lows:
• turn the Temperature regulator counter clockwise to obtain warmer storage tem­perature.
• turn the Temperature regulator clockwise to obtain colder storage temperature.
A medium setting is generally the most suitable.
shall be disposed according to the ap­plicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on this appliance marked by the symbol
are recyclable.
The exact setting should be chosen keeping in mind that the temperature inside the ap­pliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Quick Chill function
The Quick Chill function provide rapid cooling of cans and bottles through cold airstream. Put the cans/bottles on the Quick Chill bottle holder and open the air lever (1) towards maximum.
The Quick Chill function is activated by press­ing Quick Chill button. The Quick Chill function stops automatically after approximately 6 hours. When the cooling is finished return the air lever (1) towards minimum. To cancel the function at any time, press Quick Chill button . The Quick Chill bottle holder can be removed if not used.
Page 5
electrolux 5
Door open alarm
If the door remains open for some minutes, the Alarm light will flashing and an alarm will sound.
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand­new product, then dry thoroughly.
Important! Do not use detergents or abra­sive powders, as these will damage the fin­ish.
Check that the drain hose at the rear of the cabinet discharges into the drip tray.
DAILY USE
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Some shelves must be lifted up by the rear edge to enable them to be removed.
Important! Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.
1. Press the Alarm button to switch off the Alarm sound.
2. Close the door and the Alarm light will switch off.
Vegetable Drawer
The drawer is suitable for storing fruit and vegetables. Some models have a separator inside the drawer that can be placed in different posi­tions to allow for the subdivision best suited to personal needs.
Page 6
6 electrolux
All parts inside the drawer can be removed for cleaning purposes.
Taste Guard Filter
Your appliance is equipped with a carbon fil­ter behind the air lever flap. The filter purifies the air from unwanted odours in the fridge compartment preserving food quality. On delivery the filter is in a plastic bag. Refer to "Installation of the Taste Guard filter" for instructions.
Important! Make sure that the air lever flap is closed to obtain proper function.
Positioning the door shelves
To permit storage of food packages of vari­ous sizes, the door shelves can be placed at different heights. To make these adjustments proceed as fol­lows:
HELPFUL HINTS AND TIPS
Hints for energy saving
• Do not open the door frequently or leave it open longer than absolutely necessary.
• If the ambient temperature is high and the Temperature Regulator is set to low tem­perature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice on the evaporator. If this happens, set the Temperature Regu­lator toward warmer settings to allow au­tomatic defrosting and so a saving in elec­tricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liq­uids in the refrigerator
• do cover or wrap the food, particularly if it has a strong flavour
• position food so that air can circulate freely around it
Hints for refrigeration
Useful hints: Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable drawer. For safety, store in this way only one or two days at the most.
gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
Important! Do not move the lower door shelf to ensure correct air circulation.
Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thor­oughly cleaned and placed in the special drawer(s) provided. Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
Hints for temperature inside the fridge
• A suitable temperature inside the fridge is approx. +5° C. It is normal with higher tem­perature in the top of the fridge. If the tem­perature regulator is set to a cold temper­ature, the ambient temperature is high or if the fridge is fully loaded the compressor will run for a longer time. If too cold, change to a higher temperature setting.
Page 7
electrolux 7
Important! Do not place food against or close to the temperature sensor. This can result in too cold temperatures.
• If you want to check the temperature of food stored in the refrigerator, place a glass of water centrally in the cabinet, and put a proper thermometer with an accura­cy of +/– 1 °C into it. After 6 hours the
CARE AND CLEANING
Caution! Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and re­charging must therefore only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with luke­warm water and some neutral soap.
• regularly check the door seals and wipe clean to ensure they are clean and free from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will dam­age the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appli­ance and save energy consumption.
Important! Take care of not to damage the cooling system.
temperature can be monitored. The meas­uring shall be performed under steady-sta­ted conditions (without changing the load).
Important! When moving the cabinet, lift it by the front edge to avoid scratching the floor.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning ex­ternal surfaces.
Important! Do not use detergents or abrasive paste as these will damage the paint, or stainless steel anti finger print coating.
After cleaning, reconnect the equipment to the mains supply.
Replacing the Taste Guard filter
To get the best performance the Taste Guard filter once every year. New active filters can be purchased from your local dealer. Refer to "Installation of the Taste Guard filter" for instructions.
Cleaning the ventilation grille
The ventilation grille can be removed for washing. Make sure the door is open and then:
Page 8
8 electrolux
1. Loosen the upper edge of the grille by
pulling outward/downward.
2. Pull the grille straight out to completely
remove it.
3. Vacuum clean under the cabinet.
Defrosting the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, dur­ing normal use. The defrost water drains out through a drain hole into a special container at the back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the defrost water drain hole in the middle of the refriger­ator compartment channel to prevent the water overflowing and dripping onto the food inside.
Periods of non-operation
When the appliance is not in use for long pe­riods, take the following precautions:
1. disconnect the appliance from electricity supply
2. remove all food
3. defrost and clean the appliance and all accessories
4. leave the door/doors open to prevent un­pleasant smells.
Important! If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
WHAT TO DO IF…
During operation of the appliance some smaller but annoying trouble can often occur, which does not require calling a technician out. In the following chart information is given about them to avoid unnecessary charges on service.
Important! The operation of the appliance goes with certain sounds (compressor and
Problem Possible cause Solution
The appliance is noisy.
The spacers located between the
The appliance is not supported properly.
back of the cabinet and the pipes come loose.
circulating sound). This not means a trouble, but a normal operation.
Important! The appliance operates discontinuously, so the stopping of compressor does not mean being no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit.
Check if the appliance stands sta­ble (all feet and wheels should be on the floor). Refer to "Levelling".
Put them back in place again.
Page 9
electrolux 9
Problem Possible cause Solution
The buzzer sounds. The Alarm light flashing.
The Pilot light flashing.
The compressor runs continuously.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
The food temperature is too high. Let the food temperature decrease
The room temperature is too
Water flows inside the re­frigerator.
Food prevent that water flows in-
Water flows on the ground.
The temperature in the appliance is too low.
The temperature in the appliance is too high.
The door is not closed correctly. Refer to "Closing the door".
The food temperature is too high. Let the food temperature decrease
The temperature in the re­frigeration is too high.
Large quantities of food to be
The appliance does not operate.
The mains plug is not connected
The appliance has no power.
The lamp does not work.
The lamp is defective. Refer to "Replacing the lamp".
The door is not closed correctly. Refer to "Door open alarm".
An error has occurred in measur­ing the temperature
The Temperature regulator may be set incorrectly.
frequently.
high.
The water outlet is clogged. Clean the water outlet.
to the water collector.
The melting water outlet does not flow in the evaporative tray above the compressor.
The Temperature regulator may be set incorrectly.
The Temperature regulator may be set incorrectly.
There is no cold air circulation in the appliance.
cooled were put in at the same time.
The appliance is switched off. Switch on the appliance.
to the mains socket correctly.
There is no voltage in the mains socket.
The door has been open to long. Close the door.
Call your service representative (the cooling system will continue to keep food products cold, but tem­perature adjustment will not be possible)
Set a warmer temperature.
Do not keep the door open longer than necessary.
to room temperature before stor­age.
Decrease the room temperature.
Make sure that food do not touch the rear plate.
Attach the melting water outlet to the evaporative tray.
Set a higher temperature.
Set a lower temperature.
to room temperature before stor­age.
Make sure that there is cold air cir­culation in the appliance.
Insert smaller quantities of food to be cooled at the same time.
Connect the mains plug to the mains socket correctly.
Connect a another electrical appli­ance to the mains socket. Check fuse. Contact a qualified electri­cian.
Page 10
10 electrolux
Problem Possible cause Solution
Door interferes with ven­tilation grill.
Misaligned door.
The appliance is not levelled. Refer to "Levelling".
The appliance is not levelled. Refer to "Levelling".
As much as the advice does not lead to result, call the nearest brand-mark service.
Replacing the lamp
1. Disconnect the appliance from the power socket.
2. Replace the bulb with one of the same power and specifically designed for household appliances (the maximum
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In­stallation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
power is shown on the light diffuser) and with E14 socket type.
3. Connect the plug to the mains socket.
4. Open the door. Make sure that the light comes on.
TECHNICAL DATA
ERE38202W ERE38202X
Dimension
Height 1800 mm 1800 mm
Width 595 mm 595 mm
Depth 623 mm 623 mm
The technical information are situated in the rating plate on the internal left side of the ap­pliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the appliance:
Page 11
electrolux 11
Climate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Ambient temperature
Location
To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 40 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. If the cabinet is placed in a corner and the side with the hinges facing the wall, the dis­tance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the equipment can be re­moved. The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top cup­board must be at least 50 mm deep.
ply socket is not earthed, connect the appli­ance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not ob­served. This appliance complies with the E.E.C. Di­rectives.
Removing the transport support
Your appliance is equipped with transport support to secure the door during transpor­tation. To remove them do these steps:
1. Open the door.
2. Remove the transport support from the door sides.
3. Remove the transport support from the lower hinge (some models).
Important! Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate cor­respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power sup-
Removing the shelf holders
Your appliance is equipped with shelf retain­ers that make it possible to secure the shelves during transportation. To remove them proceed as follows:
1. Move the shelf holders in the direction of the arrow (A).
2. Raise the shelf from the rear and push it forward until it is freed (B).
3. Remove the retainers (C).
Page 12
12 electrolux
Spacers
Install the spacers provided within the ac­cessory bag as shown in the figures. When two appliances are placed beside each other, attach the adhesive spacers be­tween the appliances.
Levelling
When placing the appliance ensure that it stands level. If necessary adjust the feet us­ing the adjustment spanner supplied.
Installation of the Taste Guard filter
The Taste Guard filter is an active carbon filter which absorbs bad odours maintain the best flavour and aroma for all foodstuffs without risk of odour cross contamination. On delivery the carbon filter is in a plastic bag to preserve performance.
1. Open the air lever flap.
Install the spacers on the back side of the panel.
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot found in the back of the air lever flap.
Page 13
electrolux 13
4. Close the air lever flap.
Important! The filter should be handled carefully so fragments do not loosen from the surface. Make sure that the air lever flap is closed to obtain proper function.
Door reversibility
To change the opening direction of the door, do these steps:
1. Remove the plug from the power socket.
2. Remove the ventilation grille. Remove the filling and install it on the opposite side of the grille.
3. Lay the appliance back side down on a wooden support.
4. Unscrew and remove the front cover (a).
5. Unscrew the hinge pin (b) and remove the door.
6. Remove the two covers on the roof (c).
7. Remove the cover on the front (d).
8. Unscrew and move the door stopper (e) to the opposite side.
9. Unscrew and move the hinge (f) to the opposite side.
10. Unscrew the lower hinge (g1). Remove the door closing device from the hinge and move the pin to the other side. Screw on the door closing device provi­ded within the accessory bag (g2). Screw on the lower hinge on the oppo­site side.
Page 14
14 electrolux
11. Remove the door closing device on the door (h1). Screw on the door closing de­vice provided within the accessory bag on the opposite side (h2).
12. Reassembly the door.
13. Screw on the hinge pin (b) on the oppo­site side.
14. Reassembly the covers (c) and (d) and the front cover (a).
15. Raise the appliance and install the ven­tilation grille.
16. Unscrew the handle. On the opposite side remove the hole covers by driving a 3-4 mm drift or drill into them. Install the handle. Fit the handle on to the opposite side by turning it one half circle. Install the hole covers provided within the accessory bag.
17. Put the cabinet in position.
Warning! Reposition, level the appliance, wait for at least four hours and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning! If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
Page 15
electrolux 15
Page 16
www.electrolux.com/shop
298376854-01-27042010
Loading...