Safety information 2
Control panel 4
First use 5
Daily use 5
Helpful hints and tips 7
SAFETY INFORMATION
In the interest of your safety and to ensure
the correct use, before installing and first using the appliance, read this user manual
carefully, including its hints and warnings. To
avoid unnecessary mistakes and accidents,
it is important to ensure that all people using
the appliance are thoroughly familiar with its
operation and safety features. Save these instructions and make sure that they remain
with the appliance if it is moved or sold, so
that everyone using it through its life will be
properly informed on appliance use and safety.
For the safety of life and property keep the
precautions of these user's instructions as
the manufacturer is not responsible for damages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door to prevent playing children to suffer electric shock or to
close themselves into it.
• If this appliance featuring magnetic door
seals is to replace an older appliance having a spring lock (latch) on the door or lid,
be sure to make that spring lock unusable
Care and cleaning 9
What to do if… 10
Technical data 13
Installation 13
Environmental concerns 16
Subject to change without notice
before you discard the old appliance. This
will prevent it from becoming a death trap
for a child.
General safety
Caution! Keep ventilation openings
clear of obstruction.
• The appliance is intended for keeping
foodstuff and/or beverages in a normal
household as explained in this instruction
booklet.
• Do not use a mechanical device or any artificial means to speed up the thawing
process.
• Do not use other electrical appliances
(such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable.
During transportation and installation of
the appliance, be certain that none of the
components of the refrigerant circuit become damaged.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of igni-
tion
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications or
modify this product in any way. Any damage to the cord may cause a short-circuit,
fire and/or electric shock.
Page 3
electrolux 3
Warning! Any electrical component
(power cord, plug, compressor) must be
replaced by a certified service agent or
qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged power plug may overheat and
cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
6. You must not operate the appliance
without the lamp cover1) of interior
lighting.
• This appliance is heavy. Care should be
taken when moving it.
• Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.
•
Bulb lamps2) used in this appliance are
special purpose lamps selected for household appliances use only. They are not
suitable for household room illumination.
Daily Use
• Do not put hot pot on the plastic parts in
the appliance.
• Do not store flammable gas and liquid in
the appliance, because they may explode.
• Do not place food products directly
against the air outlet on the rear wall.
3)
• Frozen food must not be re-frozen once it
has been thawed out.
• Store pre-packed frozen food in accordance with the frozen food manufacturer's
instructions.
• Appliance's manufacturers storage recommendations should be strictly adhered
to. Refer to relevant instructions.
• Do not place carbonated or fizzy drinks in
the freezer compartment as it creates
pressure on the container, which may
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If the appliance is Frost Free
cause it to explode, resulting in damage to
the appliance.
• Ice lollies can cause frost burns if consumed straight from the appliance.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary,
clean the drain. If the drain is blocked, water will collect in the bottom of the appliance.
• Never use a hair drier or other heating appliances to speed up defrosting. Excessive
heat may damage the plastic interior, and
humidity could enter the electric system
making it live.
Installation
Important! For electrical connection
carefully follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if there
are damages on it. Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
• Adequate air circulation should be around
the appliance, lacking this leads to overheating. To achieve sufficient ventilation
follow the instructions relevant to installation.
• Wherever possible the back of the product
should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close
to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
•
Connect to potable water supply only.
4)
Page 4
4 electrolux
Service
• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine
spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
CONTROL PANEL
1. Freezer temperature regulator
2. Alarm light
3. Pilot light
4. Action Freeze button
Alarm reset button
5. Action Freeze light
6. Fridge temperature regulator
Switching on
Insert the plug into the wall socket.
The Pilot light will light up.
Turn the Freezer temperature regulator
clockwise to a medium setting.
Turn the Fridge temperature regulator clockwise to a medium setting.
Important! If the temperature inside the
appliance is too high the Alarm light will light
up and an alarm will sound, refer to
"Temperature Alarm"
Switching off
To turn off the appliance, turn the Freezer
temperature regulator to the 0 position.
The Alarm will sound an it turns off after a few
seconds.
either its refrigerant circuit or insulation
materials. The appliance shall not be discarded together with the urban refuse
and rubbish. The insulation foam contains flammable gases: the appliance
shall be disposed according to the applicable regulations to obtain from your
local authorities. Avoid damaging the
cooling unit, especially at the rear near
the heat exchanger. The materials used
on this appliance marked by the symbol
are recyclable.
Important! The pilot light stay on until the
appliance is disconnected from the power
socket.
Switching off the fridge compartment
To turn off the Fridge, turn the Fridge temperature regulator to the 0 position.
Important! It is not possible to run only the
fridge.
If the freezer is turned off, the fridge will also
turn off.
Important! The pilot light stay on until the
appliance is disconnected from the power
socket.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator counter
clockwise to obtain warmer storage temperature.
• turn the Temperature regulator clockwise
to obtain colder storage temperature.
A medium setting is generally the most
suitable.
4) If a water connection is foreseen
Page 5
electrolux 5
The exact setting should be chosen keeping
in mind that the temperature inside the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is
high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures,
it may run continuously causing frost to form
on the rear wall. In this case the Temperature
regulator must be set to a higher temperature
to allow automatic defrosting and therefore
reduced energy consumption.
Action Freeze function
You can activate the Action Freeze function
by pressing the Action Freeze button.
FIRST USE
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brandnew product, then dry thoroughly.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Check that the drain hose at the rear of the
cabinet discharges into the drip tray.
The Action Freeze light will light up.
Important! This function stops automatically
after 52 hours.
It is possible to deactivate the function at any
time by pressing the Action Freeze button.
The Action Freeze light will switch off.
Temperature alarm
Temperature increase in the freezer compartment (for example due to an earlier power failure) is indicated by:
• Alarm light flashing.
• sounding of buzzer.
During the alarm phase, the buzzer can be
switched off by pressing the Alarm reset button.
When normal conditions are restored the
Alarm light will switch off automatically.
DAILY USE
Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen and
deep-frozen food for a long time.
To freeze small amount of fresh foods it is not
necessary to change the present setting.
To freeze fresh food activate the Action
Freeze function 24 hours before placing the
food to be frozen in the freezer compartment.
Place the fresh food to be frozen in the two
top compartments.
The maximum amount of food that can be
frozen in 24 hours is specified on the ratingplate , a label located on the inside of the
appliance.
The freezing process lasts 24 hours: during
this period do not add other food to be frozen.
Page 6
6 electrolux
Storage of frozen food
When first starting-up or after a period out of
use, before putting the products in the compartment let the appliance run at least 2
hours.
Important! In the event of accidental
defrosting, for example due to a power
failure, if the power has been off for longer
than the value shown in the technical
characteristics chart under "rising time", the
defrosted food must be consumed quickly or
cooked immediately and then re-frozen (after
cooling).
Thawing
Deep-frozen or frozen food, prior to being
used, can be thawed in the refrigerator compartment or at room temperature, depending
on the time available for this operation.
Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking
will take longer.
Removal of freezing baskets from the
freezer
The freezing baskets have a limit stop to prevent their accidental removal or falling out. At
the time of its removal from the freezer, pull
the basket towards yourself and, upon
reaching the end point, remove the basket by
tilting its front upwards.
At the time of putting it back, slightly lift the
front of the basket to insert it into the freezer.
Once you are over the end points, push the
baskets back in their position.
Freezing baskets
The freezer baskets ensure that it is quick
and easy to find the food package you want.
To gain space, the baskets can be removed
and the food can be put directly on the
shelves. On all shelves, except the top shelf,
it is possible to place food that protrude 20
mm from the front edge. This allows maximum use of the available space.
Important! Do not remove the bottom
basket to ensure correct air circulation.
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
Some shelves must be lifted up by the rear
edge to enable them to be removed.
Important! Do not move the glass shelf
above the vegetable drawer to ensure
correct air circulation.
Bottle rack
Place the bottles (with the opening facing
front) in the pre-positioned shelf.
Important! If the shelf is positioned
horizontally, place only closed bottles.
Page 7
This bottle holder shelf can be tilted in order
to store previously opened bottles. To obtain
this result, pull the shelf up so it can rotate
upwards and be placed on the next higher
level.
electrolux 7
Vegetable Drawer
The drawer is suitable for storing fruit and
vegetables.
Some models have a separator inside the
drawer that can be placed in different positions to allow for the subdivision best suited
to personal needs.
All parts inside the drawer can be removed
for cleaning purposes.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at
different heights.
To make these adjustments proceed as follows:
gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
Important! Do not move the lower door shelf
to ensure correct air circulation.
Important! A few positions can't be used
due to interference with the temperature
sensor.
HELPFUL HINTS AND TIPS
Hints for energy saving
• Do not open the door frequently or leave it
open longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature and the appliance is fully loaded,
the compressor may run continuously,
causing frost or ice on the evaporator. If
this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids in the refrigerator
• do cover or wrap the food, particularly if it
has a strong flavour
• position food so that air can circulate freely
around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
Cooked foods, cold dishes, etc..: these
should be covered and may be placed on any
shelf.
Page 8
8 electrolux
Fruit and vegetables: these should be thoroughly cleaned and placed in the special
drawer(s) provided.
Butter and cheese: these should be placed
in special airtight containers or wrapped in
aluminium foil or polythene bags to exclude
as much air as possible.
Milk bottles: these should have a cap and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Hints for temperature inside the fridge
• A suitable temperature inside the fridge is
approx. +5° C. It is normal with higher temperature in the top of the fridge and lower
temperature in the lower part. If the temperature regulator is set to a cold temperature, the ambient temperature is high or
if the fridge is fully loaded the compressor
will run for a longer time. This results in
colder temperature in the lower part of the
fridge due to the cold air that falls down. It
may result in that food with high water
content start to freeze. If too cold, change
to a higher temperature setting.
Important! Do not place any shelves
towards the water drain hole. This can result
in too cold temperatures.
• If you want to check the temperature of
food stored in the refrigerator, place a
glass of water centrally in the cabinet, and
put a proper thermometer with an accuracy of +/– 1 °C into it. After 6 hours the
temperature can be monitored. The measuring shall be performed under steady-stated conditions (without changing the load).
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
• the maximum quantity of food which can
be frozen in 24 hrs. is shown on the rating
plate;
• the freezing process takes 24 hours. No
further food to be frozen should be added
during this period;
• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it
to be rapidly and completely frozen and to
make it possible subsequently to thaw only
the quantity required;
• wrap up the food in aluminium foil or polythene and make sure that the packages
are airtight;
• do not allow fresh, unfrozen food to touch
food which is already frozen, thus avoiding
a rise in temperature of the latter;
• lean foods store better and longer than
fatty ones; salt reduces the storage life of
food;
• water ices, if consumed immediately after
removal from the freezer compartment,
can possibly cause the skin to be freeze
burnt;
• it is advisable to show the freezing in date
on each individual pack to enable you to
keep tab of the storage time.
Hints for storage of frozen food
To obtain the best performance from this appliance, you should:
Page 9
electrolux 9
• make sure that the commercially frozen
foodstuffs were adequately stored by the
retailer;
• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the
shortest possible time;
CARE AND CLEANING
Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in
its cooling unit; maintenance and recharging must therefore only be carried
out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance with
a brush or a vacuum cleaner. This operation
will improve the performance of the appliance and save energy consumption.
Important! Take care of not to damage the
cooling system.
Important! When moving the cabinet, lift it
by the front edge to avoid scratching the
floor.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason use a soft cloth rinsed in warm water
and neutral soap emulsion for cleaning external surfaces.
Important! Do not use detergents or
abrasive paste as these will damage the
• not open the door frequently or leave it
open longer than absolutely necessary.
• Once defrosted, food deteriorates rapidly
and cannot be refrozen.
• Do not exceed the storage period indicated by the food manufacturer.
paint, or stainless steel anti finger print
coating.
After cleaning, reconnect the equipment to
the mains supply.
Cleaning the ventilation grille
The ventilation grille can be removed for
washing.
Make sure the door is open and then:
1. Loosen the upper edge of the grille by
pulling outward/downward.
2. Pull the grille straight out to completely
remove it.
3. Vacuum clean under the cabinet.
Defrosting the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
every time the motor compressor stops, during normal use. The defrost water drains out
through a drain hole into a special container
at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator compartment channel to prevent the
water overflowing and dripping onto the food
inside.
Page 10
10 electrolux
Defrosting the freezer
A certain amount of frost will always form on
the freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.
To remove the frost, follow the instructions
below:
• switch off the appliance and pull out the
plug from the wall socket
• remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place
• remove the freezer drawers
• put insulating material around the drawers,
e.g. blankets or newspapers.
Defrosting can be accelerated by placing
bowls with hot water (not boiling) inside the
freezer.
• Loosen the drainage channel from its resting position, push it in according to the illustration and place it in the bottom freezer
drawer where water can collect
• carefully scrape off the ice when it starts to
thaw. Use a wood or a plastic scraper
• when all the ice has melted, clean and wipe
the cabinet dry, then put the drainage
channel back in place.
• switch on the cabinet, insert the plug into
the wall socket and replace the frozen
foodstuff.
Important! Never use sharp metal tools to
scrape off frost from the evaporator as you
could damage it. Do not use a mechanical
device or any artificial means to speed up the
thawing process other than those
recommended by the manufacturer. A
temperature rise of the frozen food packs,
during defrosting, may shorten their safe
storage life.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
1. disconnect the appliance from electricity
supply
2. remove all food
3. defrost and clean the appliance and all
accessories
4. leave the door/doors open to prevent un-
pleasant smells.
Important! If the cabinet will be kept on, ask
somebody to check it once in a while to
prevent the food inside from spoiling in case
of a power failure.
WHAT TO DO IF…
During operation of the appliance some
smaller but annoying trouble can often occur,
which does not require calling a technician
out. In the following chart information is given
about them to avoid unnecessary charges on
service.
Important! The operation of the appliance
goes with certain sounds (compressor and
circulating sound). This not means a trouble,
but a normal operation.
Page 11
electrolux 11
Important! The appliance operates
discontinuously, so the stopping of
compressor does not mean being no
ProblemPossible causeSolution
The appliance is noisy.
The cushion spacers located be-
The buzzer sounds. The
Alarm light flashing.
Pilot light flashing.
The compressor runs
continuously.
The door is not closed correctly.Refer to "Closing the door".
The door has been opened too
The food temperature is too high. Let the food temperature decrease
The room temperature is too
Water flows on the rear
plate of the refrigerator.
Water flows inside the refrigerator.
Food prevent that water flows in-
Water flows on the
ground.
There is too much frost
and ice.
The door is not closed correctly.Refer to "Closing the door".
The door gasket is deformed or
The Temperature regulator may
The temperature in the
appliance is too cold
The temperature in the
appliance is too warm.
The door is not closed correctly.Refer to "Closing the door".
The appliance is not supported
properly.
tween the back of the cabinet and
the pipes come loose.
The temperature in the freezer is
too high.
An error has occurred in measuring the temperature.
The Temperature regulator may
be set incorrectly.
frequently.
high.
During the automatic defrosting
process, frost defrosts on the rear
plate.
The water outlet is clogged.Clean the water outlet.
to the water collector.
The melting water outlet does not
flow in the evaporative tray above
the compressor.
Food are not wrapped properly.Wrap the food better.
dirty.
be set incorrectly.
The Temperature regulator may
be set incorrectly.
The Temperature regulator may
be set incorrectly.
current. That is why you must not touch the
electrical parts of the appliance before
breaking the circuit.
Check if the appliance stands stable (all feet and wheels should be
on the floor). Refer to "Levelling".
Put them back in place again.
Refer to "Temperature Alarm"
Call your service representative
(the cooling system will continue to
keep food products cold, but temperature adjustment will not be
possible).
Set a warmer temperature.
Do not keep the door open longer
than necessary.
to room temperature before storage.
Decrease the room temperature.
This is correct.
Make sure that food do not touch
the rear plate.
Attach the melting water outlet to
the evaporative tray.
Refer to "Closing the door".
Set a warmer temperature.
Set a warmer temperature.
Set a colder temperature.
Page 12
12 electrolux
ProblemPossible causeSolution
The food temperature is too high. Let the food temperature decrease
The temperature in the refrigeration is too warm.
Large quantities of food to be
The temperature in the
freezer is too warm.
Large quantities of food to be fro-
The appliance does not
operate.
The mains plug is not connected
The appliance has no power.
The lamp does not work.
The door has been open to long. Close the door.
Door interferes with ventilation grill.
Misaligned door
There is no cold air circulation in
the appliance.
cooled were put in at the same
time.
Food is too near to each other.Store food so that there is cold air
zen were put in at the same time.
The appliance is switched off.Switch on the appliance.
to the mains socket correctly.
There is no voltage in the mains
socket.
The lamp is defective.Refer to "Replacing the lamp".
The appliance is not levelled.Refer to "Levelling"
The appliance is not levelled.Refer to "Levelling"
to room temperature before storage.
Make sure that there is cold air circulation in the appliance.
Insert smaller quantities of food to
be cooled at the same time.
circulation.
Insert smaller quantities of food to
be frozen at the same time.
Connect the mains plug to the
mains socket correctly.
Connect another electrical appliance to the mains socket. Check
fuse. Contact a qualified electrician.
As much as the advice does not lead to result, call the nearest brand-mark service.
Replacing the lamp
1. Disconnect the appliance from the power
socket.
2. Fold the lamp cover backward by loosen
the front edge.
3. Replace the bulb with one of the same
power and specifically designed for
household appliances (the maximum
power is shown on the light diffuser) and
with E14 socket type.
4. Reconnect the appliance.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
Page 13
TECHNICAL DATA
Dimension
Height1800 mm
Width595 mm
Depth600 mm
Rising Time18 h
The technical information are situated in the
rating plate on the internal left side of the appliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the climate class indicated on the rating plate of the
appliance:
Climate
class
SN+10°C to + 32°C
N+16°C to + 32°C
ST+16°C to + 38°C
T+16°C to + 43°C
Location
To ensure best performance, if the appliance
is positioned below an overhanging wall unit,
the minimum distance between the top of the
cabinet and the wall unit must be at least 40
mm . Ideally, however, the appliance should
not be positioned below overhanging wall
units.
If the cabinet is placed in a corner and the
side with the hinges facing the wall, the distance between the wall and the cabinet must
be at least 30 mm to allow the door to open
enough so that the equipment can be removed.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top cupboard must be at least 50 mm deep.
Ambient temperature
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
electrolux 13
Page 14
14 electrolux
Removing the transport support
Your appliance is equipped with transport
support to secure the door during transportation.
To remove them do these steps:
1. Open the door.
2. Remove the transport support from the
door sides.
3. Remove the transport support from the
lower hinge (some models).
Important! Some models are fitted with a
silencing pad under the cabinet. Do not
remove this pad.
Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet using the adjustment spanner supplied.
Removing the shelf holders
Your appliance is equipped with shelf retainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of
the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
Door reversibility
To change the opening direction of the door,
do these steps:
1. Remove the plug from the power socket.
2. Remove the ventilation grille. Remove
the filling and install it on the opposite
side of the grille.
3. Lay the appliance back side down on a
wooden support.
4. Unscrew the lower hinge and remove the
lower door.
Page 15
5. Unscrew and remove the front cover (a).
Unscrew the hinge pin (b) and remove
the upper door.
Remove the two covers on the roof (c).
electrolux 15
7. Remove the hole covers (b1) by driving a
drift into them and rocking them loose.
Unscrew the middle hinge (b2) and install
it on the opposite side.
Install the hole covers provided within the
accessory bag.
6. Remove the cover on the front (d).
Unscrew and move the door stopper (e)
to the opposite side.
Unscrew and move the hinge (f) to the
opposite side.
8. Disassemble the door closing devices
(c1, c2) by unscrewing the screw (c3).
Reverse the door closing device (c1, c2),
move to the other side of the other door
and fix by screwing in the screw (c3).
Move the hole cover (c4) to the other side
of the door.
Page 16
16 electrolux
9. Re-assembly the upper door.
10. Screw on the hinge pin (b) on the opposite side.
11. Re-assembly the covers (c) and (d) and
the front cover (a).
12. Install the lower door and screw the lower hinge by changing the position of the
pin.
13. Tighten the hinge. Make sure that the
doors are aligned and blocked by the
lock-nut.
14. Raise the appliance and install the ventilation grille.
15. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle.
Install the hole covers provided within the
accessory bag.
16. Put the cabinet in position.
Warning! Reposition, level the
appliance, wait for at least four hours
and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning! If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
Page 17
your household waste disposal service or the
shop where you purchased the product.
electrolux 17
Page 18
18 electrolux
Page 19
electrolux 19
Page 20
www.electrolux.com/shop
298376892-00-26032010
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.