Page 1
user manual
Fridge
ERA 39375 W
ERA 39375 X
Page 2
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
Contents
Safety information 2
Control Panel 4
First use 6
Daily use 6
How to use the water dispenser with BRITA
MAXTRA filter cartridge 7
Subject to change without notice
Helpful hints and tips 13
Care and Cleaning 13
What to do if… 14
Technical data 16
Installation 16
Environmental concerns 19
Safety information
In the interest of your safety and to ensure
the correct use, before installing and first using the appliance, read this user manual
carefully, including its hints and warnings. To
avoid unnecessary mistakes and accidents,
it is important to ensure that all people using
the appliance are thoroughly familiar with its
operation and safety features. Save these instructions and make sure that they remain
with the appliance if it is moved or sold, so
that everyone using it through its life will be
properly informed on appliance use and safety.
For the safety of life and property keep the
precautions of these user's instructions as
the manufacturer is not responsible for damages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• Keep all packaging well away from children. There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door to prevent playing children to suffer electric shock or to
close themselves into it.
• If this appliance featuring magnetic door
seals is to replace an older appliance having a spring lock (latch) on the door or lid,
be sure to make that spring lock unusable
before you discard the old appliance. This
will prevent it from becoming a death trap
for a child.
General safety
Caution! Keep ventilation openings
clear of obstruction.
• The appliance is intended for keeping
foodstuff and/or beverages in a normal
household as explained in this instruction
booklet.
• Do not use a mechanical device or any artificial means to speed up the thawing
process.
• Do not use other electrical appliances
(such as ice cream makers) inside of refrigerating appliances, unless they are approved for this purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the
appliance, a natural gas with a high level of
environmental compatibility, which is nevertheless flammable.
During transportation and installation of
the appliance, be certain that none of the
components of the refrigerant circuit become damaged.
If the refrigerant circuit should become
damaged:
Page 3
electrolux 3
– avoid open flames and sources of igni-
tion
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications or
modify this product in any way. Any damage to the cord may cause a short-circuit,
fire and/or electric shock.
Warning! Any electrical component
(power cord, plug, compressor) must be
replaced by a certified service agent or
qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged power plug may overheat and
cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
6. You must not operate the appliance
without the lamp cover
1)
of interior
lighting.
• This appliance is heavy. Care should be
taken when moving it.
• Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct sunlight.
Daily use
• Do not put hot pot on the plastic parts in
the appliance.
• Do not store flammable gas and liquid in
the appliance, because they may explode.
• Appliance's manufacturers storage recommendations should be strictly adhered
to. Refer to relevant instructions.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
• Do not clean the appliance with metal objects.
• Regularly examine the drain in the refrigerator for defrosted water. If necessary,
clean the drain. If the drain is blocked, water will collect in the bottom of the appliance.
Installation
Important! For electrical connection
carefully follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if there
are damages on it. Do not connect the appliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
• Adequate air circulation should be around
the appliance, lacking this leads to overheating. To achieve sufficient ventilation
follow the instructions relevant to installation.
• Wherever possible the back of the product
should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close
to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the appliance.
•
Connect to potable water supply only.
2)
Service
• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine
spare parts must be used.
1) If the lamp cover is foreseen
2) If a water connection is foreseen
Page 4
4 electrolux
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. The appliance shall not be discarded together with the urban refuse
and rubbish. The insulation foam contains flammable gases: the appliance
shall be disposed according to the applicable regulations to obtain from your
local authorities. Avoid damaging the
cooling unit, especially at the rear near
the heat exchanger. The materials used
on this appliance marked by the symbol
are recyclable.
Control Panel
AC
BDE
A - Appliance button ON/OFF D - Function button
B - Temperature regulation button E - Confirmation button
C - Temperature and function indicator
Display
If on the Eco Mode function is on If on the FreeStore function is on
Positive Temperature indicator If on the Shopping function is on
Temperature indicator If on the Child Lock function is on
Switching on
Insert the plug into the power outlet. If the
display is not illuminated, press button (A), to
start the appliance.
For optimal food storage select the Eco
Mode and the temperature is set to +5°C in
the fridge.
To select a different temperature refer to
"Temperature regulation".
Important! If the door remains open for
some minutes, the light will turn off automatically. The light is reset by closing and opening the door itself.
Switching off
The appliance is shut off by pressing key (A)
for more than 1 second.
During this, a countdown of the temperature
from -3 -2 -1 will be shown.
Temperature regulation
The temperature may be changed by pressing the button (B).
The current temperature setting flashes and
by pressing button (B) again the set temperature is possible to change in steps of one
degree.
After some seconds is shown the setted default temperature.
Page 5
electrolux 5
Functions Menu
By activating the key D the functions menu is
operating. Each function could be confirmed
by pressing button E. If there is no confirmation after some seconds the display will go
out from the menu and return in normal condition. The following functions are indicated:
Eco Mode function
FreeStore Function
Shopping function
Child Lock function
Eco Mode Function
The Eco Mode function is activated by pressing key D (several times if necessary) until the
corresponding icon appears
(or setting
the temperature at +5°C).
You must confirm the choice by pressing key
E within few seconds. You will hear the buzzer and the icon remains lighted.
In this condition the chosen temperatures are
automatically set (+ 5°C), in the best conditions for storing food.
It is possible to de-activate the function at
any time by changing the selected temperature in the compartment.
FreeStore Function
If you need to insert a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the Shopping function to chill the products more rapidly and to avoid warming the other food
which is already in the refrigerator.
TheFreeStore function is activated by pressing key (D) (several times if necessary) until
the corresponding icon appears
. You
must confirm the choice by pressing key (E)
within few seconds. You will hear the buzzer
and the icon remains lighted.
TheFreeStore function shuts off automatically after approximately 6 hours. It is possible
to de-activate the function at any time by
pressing key (D) until the corresponding icon
will flash and then key (E).
Important!
The activation of the FreeStore function increase the energy consumption.
Shopping Function
If you need to insert a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the Shopping function to chill the products more rapidly and to avoid warming the other food
which is already in the refrigerator.
The Shopping function is activated by pressing key (D) (several times if necessary) until
the corresponding icon appears
. You
must confirm the choise by pressing key (E)
within few seconds. You will hear the buzzer
and the icon remains lighted.
The Shopping function shuts off automatically after approximately 6 hours. It is possible to de-activate the function at any time by
pressing key (D) until the corresponding icon
will flash and then key (E).
Child Lock Function
The Child Lock function is activated by
pressing key (D) (several times if necessary)
until the corresponding icon appears
.
You must confirm the choice by pressing key
(E) within few seconds. You will hear the buzzer and the icon remains lighted. In this condition any possible operation through the
keys does not cause any change as long as
this function is activated.
It is possible to de-activate the function at
any time by pressing key (D) until the corresponding icon will flash and then key (E).
Holiday Function "H"
The holiday function sets the temperature at
+ 15°C.
This function allows you to keep the refrigerator shut and empty during a long holiday
period ( e. g. the summer holidays) without
the formation of a bad smell.
To turn on the holiday function operate as per
modift the selected temperature. The temperature indicator can modify the displayed
temperature up to + 8 °C, 1 °at a tim. + 2 °C
will be followed by the letter "H ". Press key
E to confirm.
Now the refrigerator is in the "holiday "function in the energy- saving mode.
Important! The fridge compartment must
be empty with holiday function on.
Page 6
6 electrolux
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brandnew product, then dry thoroughly.
Daily use
Use of the fridge compartment
The temperature of this compartment may
be regulated between +2°C and +8°C.
During normal functioning the indicator
shows the temperature setted.
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
Some shelves must be lifted up by the rear
edge to enable them to be removed.
Important! Do not move the glass shelf
above the vegetable drawer to ensure
correct air circulation.
Important! Do not use detergents or abrasive powders, as these will damage the finish.
Bottle rack
Place the bottles (with the opening facing
front) in the pre-positioned shelf.
Important! If the shelf is positioned
horizontally, place only closed bottles.
Vegetable Drawer
The drawer is suitable for storing fruit and
vegetables.
Some models have a separator inside the
drawer that can be placed in different positions to allow for the subdivision best suited
to personal needs.
All parts inside the drawer can be removed
for cleaning purposes.
This bottle holder shelf can be tilted in order
to store previously opened bottles. To obtain
this result, pull the shelf up so it can rotate
upwards and be placed on the next higher
level.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be placed at
different heights.
To make these adjustments proceed as follows:
Page 7
electrolux 7
gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
FreeStore
The refrigerator compartment is equipped
with a device that allows for rapid cooling of
foods and more uniform temperature in the
compartment.
This device activates by itself when needed,
for example for a quick temperature recovering after door opening or when the ambient
temperature is high.
Allows you to switch on the device manually
when needed (refer to "FreeStore Function").
Important! The FreeStore device stops
when the door is open and restarts
immediately after the door closing.
How to use the water dispenser with BRITA MAXTRA filter cartridge
BRITA water filter unit
Internal components:
6
3
5
2 Funnel
3 Tank lid
4 Valve + gasket
5 Including BRITA MAXTRA filter
6 BRITA Memo - the electronic cartridge
exchange indicator
External components:
1 Water tank
2
1
4
Page 8
8 electrolux
1
2
3
1Dispenser
2 Water lever
3 Water drop tray
Initial operations to use your water
dispenser
1. Remove every tape and other protection
system from the tank assembly
2. clean the components, as described into
"Water dispenser cleaning procedure", in
order to remove eventual residue.
Water dispenser cleaning procedure
1. Unblock the two stopping elements on
the sides of the tank as shown in the pictures:
– take out the BRITA MAXTRA cartridge
from the water filter unit
– press the stopping elements in the
middle and move it up
– move the stopper into direction of the
central tank.
2. Push up the tank along the direction of
the valve.
3. Remove the lid and the funnel.
A
4. Unscrew the valve in counter clockwise
(pay particular attention not to lose the
Valve Gasket because is necessary to a
correct functioning of the features ).
5. Clean the tank lid, the valve and the gasket with a solution of warm water and
neutral soap. Rinse it and put it inside the
door hole during the cleaning of the other
components (in order to avoid cold air
leakage from the fridge).
6. Clean the tank and the funnel into the
dishwasher or with a solution of warm
water and neutral soap and rinse them.
7. After the tank components cleaning take
back the valve from the fridge door and
assembly the tank in the inverse order
(4;3;2;1) of disassembly (pay attention at
the valve gasket positioning ).
Page 9
8. Put the assembled tank on the door
along the valve direction.
9. Block the stopping elements in the inverse order of unblock.
10. Insert again the BRITA MAXTRA cartridge in the funnel .
How to use the BRITA MAXTRA filter
cartridge
Step 1: Preparing the cartridge
To prepare your BRITA filter cartridge, please
remove the protective wrapper (note: cartridge and inside wrapper may appear moist,
this is simply condensation).
Immerse the cartridge in cold water and
shake it gently to remove any air bubbles.
The filter now is ready to use.
As required for some other water filter cartridges, there is no need to pre-soak the new
Maxtra Cartridge.
electrolux 9
Step 2: Insert in the water tank
Remove the tank lid. Before inserting the cartridge, remove the funnel and clean it thoroughly by rising it and wiping it dry.
Then, thoroughly clean the inside of the water
tank with a dump cloth and wipe it dry as
well.
Place the cartridge into the filter tank and
push downwards until it 'clicks' firmly into
place.
The cartridge should stay in place if the funnel
is turned upside down.
Step 3: Rinse the cartridge
2x 3x=ok
Take the funnel out of the BRITA water filter
unit, fill it under the tap with cold tap water
and allow it to filter through.
Discard the first two fillings into the sink.
These first two fillings are used to flush the
filter cartridge.
Then, place the funnel back into BRITA water
filter unit.
Place the cover back onto the jug and press
it carefully downwards to ensure it fits correctly into place.
Step 4: Refill the water tank
Page 10
10 electrolux
To fill the tank with cold water, simply open
the flip top lid, take a jug of tap water and
pour it inside the tank through the cover as
shown into the picture (use the lid every time
that you want to fill your water).
Important! In order to avoid risk of spillage
of water during closing and opening of the
refrigerator door, we recommend to not fill
completely the water tank but leave a head
space of air (max. refilling limit till the frontal
marks).
If you have not used all filtered water in the
water tank within 1-2 days, please discard
any water left inside the BRITA water filter unit
before refilling it.
Allow the water to filter through and repeat
"Step 4" as many times as you want until the
BRITA water filter unit is filled up.
Remove cartridge with ring pull handle
BRITA cartridge regularly. BRITA recommends that you replace the cartridge in the
BRITA unit of your fridge every four weeks.
BRITA Memo automatically reminds you
when to change the cartridge.
START
%
100
75
50
25
The unique BRITA Memo measures the recommended time of use of your cartridge.
Memo is easy to use and automatically reminds your when to change your cartridge.
The BRITA Memo is located on the lid of the
water tank. Operation is really simple.
Start the Memo display
To start Memo please press and hold down
the start button on the lid until all four bars
appear in the display and flash twice. The
Memo is now set.
To exchange the cartridge after four weeks,
simply use the ring pull handle on the top of
the cartridge to remove it from the funnel,
and repeat steps 1 - 3 above.
The BRITA Memo
For maximum filter performance and optimum taste, it is important to change your
Page 11
electrolux 11
START
%
100
75
50
25
Functional control
The flashing dot in the bottom right corner of
the Memo indicates that the Memo is working.
START
%
100
75
50
25
Change display
START
%
100
75
50
25
Page 12
12 electrolux
Every week one bar will disappear to show
the remaining cartridge life. After four weeks
all four bars will disappear. This, and a flashing arrow, indicate that the cartridge should
now be changed.
Insert a new cartridge according to the instructions and reactivate the Memo as described above.
START
%
100
75
50
25
When only one bar is showing, you should
just check whether you have a new BRITA
MAXTRA filter cartridge to hand.
Important! The Memo is only designed to be
used with BRITA filter cartridges.
BRITA Memo: the electronic cartridge exchange indicator has a life of approximately
5 years. At the end of the Memo's life, please
remember that it is an electronic device and
to dispose on the Memo according to all applicable provisions and regulations.
To remove the exhausted Memo place a
screwdriver in the notch next to the Memo
and push it out.
Please note that Memo should not be removed for any other reason than to dispose
of it.
Important information
• The fridge door valve hole must be closed
with the Water Valve during the regular
functioning of the appliance.
• Use only drinking water. The use of any
other drink type can leave residues, taste
or odor in the reservoir and in the tap.
• It is possible to hear some noises caused
by air entering when the water left the reservoir.
• In case the water does not flow well, press
the driving lever once again. Keep the
glass below the tap for some instants, in
order to assure that all the water is collected by the glass.
• Do not use gasified drinks, such as soft
drinks. The drink can leak due to the gas
pressure.
• Remember that water is a foodstuff.
Please consume filtered water within one
to two days.
• Should your BRITA water filter unit not be
in use for a prolonged period (e.g. vacation), we recommend that you discard any
water left inside the system and leave the
cartridge inside the filter tank.
Before using the system again take out the
cartridge and repeat steps 1 to 4 of "How
to use the BRITA MAXTRA filter cartridge".
• The BRITA water filter unit is designed for
use only with municipally treated tap water
(note: this water is constantly controlled
and according to legal regulations safe to
drink) or with water from private supplies
which has been tested safe to drink.
If an instruction is received from the authorities that mains water must be boiled,
the BRITA filtered water has also to be
boiled. When the instruction to boil water
is no longer in force, the entire filter system
must be cleaned and a new cartridge inserted.
More information on the use of BRITA filter
cartridges and the Memo can be found in the
BRITA information guide.
Page 13
You can purchase new BRITA filter cartridges and Memo through consumer
service network of Electrolux or BRITA.
Helpful hints and tips
Hints for energy saving
• Do not open the door frequently or leave it
open longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature and the appliance is fully loaded,
the compressor may run continuously,
causing frost or ice on the evaporator. If
this happens, set the Temperature Regulator toward warmer settings to allow automatic defrosting and so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids in the refrigerator
• do cover or wrap the food, particularly if it
has a strong flavour
• p osit ion f ood s o tha t air can circulate freely
around it
Hints for refrigeration
Useful hints:
electrolux 13
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
Cooked foods, cold dishes, etc..: these
should be covered and may be placed on any
shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the special
drawer(s) provided.
Butter and cheese: these should be placed
in special airtight containers or wrapped in
aluminium foil or polythene bags to exclude
as much air as possible.
Milk bottles: these should have a cap and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Care and Cleaning
Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in
its cooling unit; maintenance and recharging must therefore only be carried
out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
• rinse and dry thoroughly.
Important! Do no t p ul l, m ov e o r d ama ge an y
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance with
a brush or a vacuum cleaner. This operation
will improve the performance of the appliance and save electricity consumption.
Important! Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason it is recommended that the outer casing of this appliance is only cleaned with
warm water with a little washing-up liquid
added.
After cleaning, reconnect the equipment to
the mains supply.
Page 14
14 electrolux
Defrosting of the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
every time the motor compressor stops, during normal use. The defrost water drains out
through a trough into a special container at
the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost
water drain hole in the middle of the refrigerator compartment channel to prevent the
water overflowing and dripping onto the food
inside. Use the special cleaner provided,
which you will find already inserted into the
drain hole.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
• disconnect the appliance from elec-
tricity supply
• remove all food
defrost
3)
and clean the appliance and all
•
accessories
• leave the door/doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody
to check it once in a while to prevent the food
inside from spoiling in case of a power failure.
What to do if…
During operation of the appliance some
smaller but annoying trouble can often occur,
which does not require calling a technician
out. In the following chart information is given
about them to avoid unnecessary charges on
service.
Important! The operation of the appliance
goes with certain sounds (compressor and
Problem Possible cause Solution
The appliance is noisy. The appliance is not supported
properly.
The spacers located between the
back of the cabinet and the pipes
come loose.
3) If foreseen.
circulating sound). This not means a trouble,
but a normal operation.
Important! The appliance operates
discontinuously, so the stopping of
compressor does not mean being no
current. That is why you must not touch the
electrical parts of the appliance before
breaking the circuit.
Check if the appliance stands stable (all feet and wheels should be
on the floor). Refer to "Levelling".
Put them back in place again.
Page 15
electrolux 15
Problem Possible cause Solution
is displayed in the tem-
perature display
An error has occurred in measuring the temperature
Call your service representative
(the cooling system will continue to
keep food products cold, but temperature adjustment will not be
possible)
The compressor operates
continually.
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open longer
than necessary.
The food temperature is too high. Let the food temperature decrease
to room temperature before storage.
The room temperature is too
Decrease the room temperature.
high.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the rear
This is correct.
plate.
Water flows into the re-
The water outlet is clogged. Clean the water outlet.
frigerator.
Food prevent that water flows in-
to the water collector.
Water flows on the
ground.
The melting water outlet does not
flow in the evaporative tray above
Make sure that food do not touch
the rear plate.
Attach the melting water outlet to
the evaporative tray.
the compressor.
There is too much frost
Food are not wrapped properly. Wrap the food better.
and ice.
The door is not closed correctly. Refer to "Closing the door".
The Temperature regulator may
Set a higher temperature.
be set incorrectly.
The temperature in the
appliance is too low.
The temperature in the
appliance is too high.
The Temperature regulator may
be set incorrectly.
The Temperature regulator may
be set incorrectly.
Set a higher temperature.
Set a lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The food temperature is too high. Let the food temperature decrease
to room temperature before storage.
The temperature in the refrigeration is too high.
Large quantities of food to be
There is no cold air circulation in
the appliance.
cooled were put in at the same
Make sure that there is cold air circulation in the appliance.
Insert smaller quantities of food to
be cooled at the same time.
time.
The appliance does not
The appliance is switched off. Switch on the appliance.
operate.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
Page 16
16 electrolux
Problem Possible cause Solution
The appliance has no power.
The lamp does not work.
The door has been open to long. Close the door.
The lamp is defective. Refer to "Replacing the lamp".
There is no voltage in the mains
socket.
The lamp is in stand-by. Close and open the door.
Connect a another electrical appliance to the mains socket. Check
fuse. Contact a qualified electrician.
As much as the advice does not lead to result, call the nearest brand-mark service.
Replacing the lamp
1. Disconnect the mains plug from the
mains socket.
2. Press on the rear hook and at the same
time slide the lamp cover in the direction
of the arrow.
3. Replace the lamp with one of the same
power (the maximum power is shown on
the light lamp cover)
4. Install the lamp cover by sliding it into its
original position.
5. Connect the mains plug to the mains
socket.
6. Open the door. Make sure that the lamp
comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
Technical data
Dimension of the recess
Height 1800 mm
Width 600 mm
Depth 650 mm
The technical information are situated in the
rating plate on the internal left side of the appliance and in the energy label.
Installation
Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Location
The appliance should be installed well away
from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can
circulate freely around the back of the cabi-
Page 17
electrolux 17
net. To ensure best performance, if the appliance is positioned below an overhanging
wall unit, the minimum distance between the
top of the cabinet and the wall unit must be
at least 100 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate levelling is ensured by one or more adjustable feet at the
base of the cabinet.
If the cabinet is placed in a corner and the
side with the hinges facing the wall, the distance between the wall and the cabinet must
be at least 10 mm to allow the door to open
enough so that the shelves can be removed.
Warning! It must be possible to
disconnect the appliance from the mains
power supply; the plug must therefore
be easily accessible after installation.
Rear spacers
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
10mm 100mm
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
10mm
Door reversibility
Before carrying out any operations, remove
the plug from the power socket. To change
the opening direction of the door, proceed as
follows:
• To carry out the following operations, we
suggest that this be made with another
person that will keep a firm hold on the
doors of the appliance during the operations.
• Open the door with the appliance in the
upright position. Unscrew the screws and
remove the upper door plastic trim.
• Remove the little plastic cover from the
door plastic trim and refit on the opposite
side (d).
• Lay down the appliance back side down.
Page 18
18 electrolux
d
d
• Remove the screw of the hinge cover plug
(a) .
• Unscrew the upper hinge and remove it
(b).
• Unscrew the screw and remove the door
stopper (c).
b
c
a
e
2
1
5
f
4
3
• Lift up the appliance to vertical position.
• Open the door and reposition the upper
door plastic trim with screws.
• Remove the door.
• Remove using a tool the cover (e), unscrew
the lower hinge pivot (f) and place it on the
opposite side.
• Re-insert the cover (e) on the opposite
side.
• Re-insert the door .
• Pay attention that the front board of the
doors are parallel to the front board of the
top.
• Fix the door stopper on the opposite side.
• Position and fix the upper hinge (that can
be found in the instruction for use bag) on
the opposite side .
• Fix the screw of the new cover hinge (that
can be found in the instruction for use
bag).
• Fix the handle on the opposite side, insert
the plastic plugs into the holes left open
that can be found in the instruction for use
bag.
Warning! Reposition, level the
appliance, wait for at least four hours
and then connect it to the power socket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the reversibility of the doors at your cost.
Page 19
electrolux 19
Warning! After having reversed the
opening direction of the doors check
that all the screws are properly tightened
and that the magnetic seal adheres to
the cabinet.
Environmental concerns
The symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical
and electronic equipment. By ensuring this
product is disposed of correctly, you will help
prevent potential negative consequences for
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket. Lay down
the appliance back side down.
the environment and human health, which
could otherwise be caused by inappropriate
waste handling of this product. For more
detailed information about recycling of this
product, please contact your local council,
your household waste disposal service or the
shop where you purchased the product.
Page 20
www.electrolux.com
212719331-00-25112009
Loading...