AEG ERA34372X, ERA34372W User Manual

Page 1
user manual
Refrigerator
ERA34372W
ERA34372X
Page 2
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2 Operation 4 First use 4 Daily use 4 Helpful hints and tips 5
SAFETY INFORMATION
In the interest of your safety and to ensure the correct use, before installing and first us­ing the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these in­structions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safe­ty. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for dam­ages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or in­struction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• Keep all packaging well away from chil­dren. There is risk of suffocation.
• If you are discarding the appliance pull the plug out of the socket, cut the connection cable (as close to the appliance as you can) and remove the door to prevent play­ing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door seals is to replace an older appliance hav­ing a spring lock (latch) on the door or lid, be sure to make that spring lock unusable
Care and Cleaning 6 What to do if… 7 Technical data 9 Installation 9 Environmental concerns 11
Subject to change without notice
before you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
Caution! Keep ventilation openings
clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household as explained in this instruction booklet.
• Do not use a mechanical device or any ar­tificial means to speed up the thawing process.
• Do not use other electrical appliances (such as ice cream makers) inside of re­frigerating appliances, unless they are ap­proved for this purpose by the manufac­turer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is con­tained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nev­ertheless flammable. During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit be­come damaged. If the refrigerant circuit should become damaged: – avoid open flames and sources of igni-
tion
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications or modify this product in any way. Any dam­age to the cord may cause a short-circuit, fire and/or electric shock.
Page 3
electrolux 3
Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified service personnel.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not squashed or damaged by the back of the appliance. A squashed or dam­aged power plug may overheat and cause a fire.
3. Make sure that you can come to the mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the lamp cover
1)
of interior
lighting.
• This appliance is heavy. Care should be taken when moving it.
• Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abra­sions or frost/freezer burns.
• Avoid prolonged exposure of the appli­ance to direct sunlight.
Bulb lamps
2)
used in this appliance are special purpose lamps selected for house­hold appliances use only. They are not suitable for household room illumination.
Daily use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance, because they may explode.
• Appliance's manufacturers storage rec­ommendations should be strictly adhered to. Refer to relevant instructions.
Care and cleaning
• Before maintenance, switch off the appli­ance and disconnect the mains plug from the mains socket.
• Do not clean the appliance with metal ob­jects.
• Regularly examine the drain in the refriger­ator for defrosted water. If necessary, clean the drain. If the drain is blocked, wa-
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If a water connection is foreseen
ter will collect in the bottom of the appli­ance.
Installation
Important! For electrical connection
carefully follow the instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages on it. Do not connect the ap­pliance if it is damaged. Report possible damages immediately to the place you bought it. In that case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil to flow back in the compressor.
• Adequate air circulation should be around the appliance, lacking this leads to over­heating. To achieve sufficient ventilation follow the instructions relevant to installa­tion.
• Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor, con­denser) to prevent possible burn.
• The appliance must not be located close to radiators or cookers.
• Make sure that the mains plug is accessi­ble after the installation of the appliance.
Connect to potable water supply only.
3)
Service
• Any electrical work required to do the serv­icing of the appliance should be carried out by a qualified electrician or competent per­son.
• This product must be serviced by an au­thorized Service Centre, and only genuine spare parts must be used.
Page 4
4 electrolux
Environment Protection
This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance shall not be dis­carded together with the urban refuse and rubbish. The insulation foam con­tains flammable gases: the appliance
OPERATION
Switching on
Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting.
Switching off
To turn off the appliance, turn the Tempera­ture regulator to the "O" position.
Temperature regulation
The temperature is automatically regulated. To operate the appliance, proceed as fol­lows:
• turn the Temperature regulator toward lower settings to obtain the minimum cold­ness.
• turn the Temperature regulator toward higher settings to obtain the maximum coldness.
shall be disposed according to the ap­plicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The materials used on this appliance marked by the symbol
are recyclable.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is high or the appliance is fully loaded, and the appliance is set to the lowest temperatures, it may run continuously causing frost to form on the rear wall. In this case the dial must be set to a higher temperature to allow automatic defrosting and therefore reduced energy consumption.
FIRST USE
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand­new product, then dry thoroughly.
DAILY USE
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
Important! Do not use detergents or abra­sive powders, as these will damage the fin­ish.
Page 5
electrolux 5
Important! this appliance is sold in France. In accordance with regulations valid in this country it must be provided with a special device (see figure) placed in the lower com­partment of the fridge to indicate the coldest zone of it.
Positioning the door shelves
To permit storage of food packages of vari­ous sizes, the door shelves can be placed at different heights. To make these adjustments proceed as fol­lows: gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required.
HELPFUL HINTS AND TIPS
Hints for energy saving
• Do not open the door frequently or leave it open longer than absolutely necessary.
• If the ambient temperature is high and the Temperature Regulator is set to low tem­perature and the appliance is fully loaded, the compressor may run continuously,
Air cooling
The Dynamic Air Cooling (DAC) fan let food cool quickly and a more uniform temperature in the compartment. You can switch on the fan by pressing the switch (1). The green light (2) comes on.
1
2
This device allows for rapid cooling of foods and a more uniform temperature in the com­partment.
Important! Switch on the fan when the ambient temperature exceeds 25°C.
causing frost or ice on the evaporator. If this happens, set the Temperature Regu­lator toward warmer settings to allow au­tomatic defrosting and so a saving in elec­tricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
Page 6
6 electrolux
• do not store warm food or evaporating liq­uids in the refrigerator
• do cover or wrap the food, particularly if it has a strong flavour
• p ositio n food so that air can circulate freely around it
Hints for refrigeration
Useful hints: Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable drawer. For safety, store in this way only one or two days at the most. Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf.
CARE AND CLEANING
Caution! Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and re­charging must therefore only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with luke­warm water and some neutral soap.
• regularly check the door seals and wipe clean to ensure they are clean and free from debris.
• rinse and dry thoroughly.
Important! Do no t p ull , m ov e or da ma ge a ny pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will dam­age the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at the back of the appliance with a brush or a vacuum cleaner. This operation will improve the performance of the appli­ance and save electricity consumption.
Important! Take care of not to damage the cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is recommended that the outer cas-
Fruit and vegetables: these should be thor­oughly cleaned and placed in the special drawer(s) provided. Butter and cheese: these should be placed in special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much air as possible. Milk bottles: these should have a cap and should be stored in the bottle rack on the door. Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.
ing of this appliance is only cleaned with warm water with a little washing-up liquid added. After cleaning, reconnect the equipment to the mains supply.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, dur­ing normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor, where it evaporates. It is important to periodically clean the defrost water drain hole in the middle of the refriger­ator compartment channel to prevent the water overflowing and dripping onto the food inside. Use the special cleaner provided, which you will find already inserted into the drain hole.
Page 7
electrolux 7
Periods of non-operation
When the appliance is not in use for long pe­riods, take the following precautions:
disconnect the appliance from elec-
tricity supply
• remove all food defrost
4)
and clean the appliance and all
• accessories
• leave the door/doors ajar to prevent un­pleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
WHAT TO DO IF…
Warning! Before troubleshooting, disconnect the mains plug from the mains socket. Only a qualified electrician or competent person must do the troubleshooting that is not in this manual.
Problem Possible cause Solution
The appliance does not operate. The lamp does not operate.
The mains plug is not connected
The appliance has no power.
The lamp does not work. The lamp is in stand-by. Close and open the door.
The lamp is defective. Refer to "Replacing the lamp".
The compressor operates continually.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
The product temperature is too
The room temperature is too
The appliance is switched off. Switch on the appliance.
to the mains socket correctly.
There is no voltage in the mains socket.
The temperature is not set cor­rectly.
frequently.
high.
high.
Important! There are some sounds during normal use (compressor, refrigerant circulation).
Connect the mains plug to the mains socket correctly.
Connect a different electrical appli­ance to the mains socket. Contact a qualified electrician.
Set a higher temperature.
Do not keep the door open longer than necessary.
Let the product temperature de­crease to room temperature before storage.
Decrease the room temperature.
4) If foreseen.
Page 8
8 electrolux
Problem Possible cause Solution
Water flows on the rear plate of the refrigerator.
Water flows into the re­frigerator.
Products prevent that water flows
Water flows on the ground.
The temperature in the appliance is too low.
The temperature in the appliance is too high.
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too
Many products are stored at the
There is no cold air circulation in
During the automatic defrosting process, frost defrosts on the rear plate.
The water outlet is clogged. Clean the water outlet.
into the water collector.
The melting water outlet does not flow in the evaporative tray above the compressor.
The temperature regulator is not set correctly.
The temperature regulator is not set correctly.
high.
same time.
the appliance.
This is correct.
Make sure that products do not touch the rear plate.
Attach the melting water outlet to the evaporative tray.
Set a higher temperature.
Set a lower temperature.
Let the product temperature de­crease to room temperature before storage.
Store less products at the same time.
Make sure that there is cold air cir­culation in the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains socket.
2. Remove the screw from the lamp cover.
3. Remove the lamp cover (refer to the illus­tration).
4. Replace the used lamp with a new lamp of the same power and specifically de­signed for household appliances. (the maximum power is shown on the lamp cover).
5. Install the lamp cover.
6. Tighten the screw to the lamp cover.
7. Connect the mains plug to the mains socket.
8. Open the door. Make sure that the lamp comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In­stallation".
3. If necessary, replace the defective door gaskets. Contact the Service Center.
Page 9
TECHNICAL DATA
Dimension of the recess
Height 1600 mm
Width 600 mm
Depth 650 mm
The technical information are situated in the rating plate on the internal left side of the ap­pliance and in the energy label.
INSTALLATION
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the cli­mate class indicated on the rating plate of the appliance:
Climate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Ambient temperature
Location
The appliance should be installed well away from sources of heat such as radiators, boil­ers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabi­net. To ensure best performance, if the ap­pliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm . Ideally, however, the ap­pliance should not be positioned below over­hanging wall units. Accurate levelling is en­sured by one or more adjustable feet at the base of the cabinet. If the cabinet is placed in a corner and the side with the hinges facing the wall, the dis­tance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the shelves can be removed.
Warning! It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.
10mm 100mm
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate cor­respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power sup­ply socket is not earthed, connect the appli­ance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not ob­served. This appliance complies with the E.E.C. Di­rectives.
electrolux 9
10mm
Page 10
10 electrolux
Rear spacers Inside the appliance you find two
spacers which must be fitted as shown in the figure.
Slacken the screws and insert the spacer under the screw head, then retighten the screws.
d
d
• Remove the screw of the hinge cover plug
(a) .
• Unscrew the upper hinge and remove it
(b).
• Unscrew the screw and remove the door
stopper (c).
b
Door reversibility
Before carrying out any operations, remove the plug from the power socket. To change the opening direction of the door, proceed as follows:
• To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the opera­tions.
• Open the door with the appliance in the upright position. Unscrew the screws and remove the upper door plastic trim.
• Remove the little plastic cover from the door plastic trim and refit on the opposite side (d).
• Lay down the appliance back side down.
c
a
• Remove the door.
• Remove using a tool the cover (e), unscrew the lower hinge pivot (f) and place it on the opposite side.
• Re-insert the cover (e) on the opposite side.
• Re-insert the door .
• Pay attention that the front board of the doors are parallel to the front board of the top.
• Fix the door stopper on the opposite side.
• Position and fix the upper hinge (that can be found in the instruction for use bag) on the opposite side .
• Fix the screw of the new cover hinge (that can be found in the instruction for use bag).
Page 11
e
2
1
5
f
4
3
• Lift up the appliance to vertical position.
• Open the door and reposition the upper door plastic trim with screws.
electrolux 11
• Unscrew the handle. On the opposite side remove the hole covers. Fix the handle on the opposite side, insert the plastic plugs into the holes left open that can be found in the instruction for use bag.
Warning! Reposition, level the appliance, wait for at least four hours and then connect it to the power socket.
In case you do not want to carry out the above mentioned operations, contact the nearest After Sales Service Force. The After Sales Service specialist will carry out the re­versibility of the doors at your cost.
Warning! After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket. Lay down the appliance back side down.
ENVIRONMENTAL CONCERNS
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.
Page 12
www.electrolux.com/shop
212700332-00-21042010
Loading...