Page 1
Frigoríf ico--Congelador / Frigorífico--Congelador / Fridge--Fr eezer / Réfrigérateur -Congélateur / Kombinovaná--Chladnička / K ühl-- G efrier kombinat ion
INSTRUCCIONES DE USO
ISTRUÇÕES DE USO
INSTRUCTION BOOKLET
ISTRUZIONI D’USO
NÁVOD NA OBSLUHU
GEBRAUCHSANWEISUNG
818 16 21-02/3
ER8496BA, ER9096BA, ER9096BE, ER9096BG
PO
NL
ES
GB
IT
SK
DE
Page 2
Safety instructions
Your new fridge/freezer may have other functions compared to your previous one.
Carefully read these instructions to learn how the appliance works and how to care for it. Keep the
booklet. It will come in handy if you later sell the cabinet or give it to somebody else.
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using the appliance. Your safety is of paramount importance. If you are insure about any of the
meanings or warnings contact the Customer Care Department.
For the User
· The cabinet is intended for keeping foodstuff in a
normal household as explained in this instruction
booklet.
· Do not keep explosive gases or liquids in the
refrigerator or freezer compartment. They may
explode and cause injury and material damage.
· Do not let sharp objects come into contact with
the refrigerating system on the back of and inside
the cabinet. If the refrigerating system i s
punctured, the cabinet will be damaged and
foodstuff inside may spoil.
· Do not keep carbonised drinks or bottles in the
freezer compartment. The glass bottles may
break.
· The cabinet is heavy. The edges and projecting
parts of the cabinet may be sharp. Be careful
when moving the cabinet and always use gloves.
Child Safety
· Pay attention so that small children do not gain
access to the operating controls or the inside of
the cabinet.
Scrapping old cabinets
When discarding the cabinet, hand it over to a
recycling station. For more information, call your
local city office or your dealer.
GB
instruction
Contents
Safety instructions 30.................
Scrapping old cabinets 30.......................
Contents 30..........................
Description of the Appliance 31........
Control Pane l 32..............................
Before use 32.........................
Using fridge 32.......................
To start the fridge and set the correct temperature 32.
Temperature inside the fridge 33.................
Measuring the temperature 33...................
Switching off 33..............................
Cabinet interior 33............................
Using the freezer 34...................
To start the freezer and set the correct temperature 34
Temperature inside the freezer 34................
Switching off 34..............................
Alarms and other features 35....................
Freezing 35..................................
Suitable storage periods 35......................
Thawing 35..................................
Cabinet interior 36............................
GB
Hints and Tips 36.....................
Saving energy 36.............................
Food Storage 37..............................
Protect the environment 37......................
Maintenance and Cleaning 37..........
Removing the ventilation grille 37................
Cleaning 37..................................
Defrosting the fridge 38........................
Defrosting the freezer 38.......................
To Change the Light Bulb 38....................
When the appliance is not in use 38...............
Something Not Working 39............
Guarantee Conditions 40.......................
Service and Spare Parts 40......................
Technical specification 41.............
Installation 41........................
Unpacking 41................................
Remove the transport supports 42................
Cleaning 42..................................
Installing the cabinet 42........................
Electrical connection 43........................
Door Reversal 43.............................
30
Electrolux 818 16 21--02/3
Page 3
Description of the Appliance
GB
1
1
1
2
1
1
1
3 3
4
5
5
5
12
6
7
7
8 8
7
10
11
ER9096BA, ER9096BE, ER9096BG
1. Glass shelf
9
2. Cooling rack
3. Vegetable drawer
4. Einfriertablett
5. Freezing basket
6. Butter compartment
7. Door shelf
8. Egg holder
9. Sliding shelf
10. Bottle shelf
11. Freezer calendar
12. Ventilation grille
1
2
1
1
1
3
3
4
6
6
5
Model ER8496BA
1. Glass shelf
2. Bottle shelf
5
3. Vegetable drawer
4. Butter compartement
7
5. Door shelf
6. Egg holder
8
9
9
11
7. Bottle shelf
8. Freezing tray
9. Freezer basket
10. Ventailation grille
9
9
10
11. Freezer calender
31
Electrolux 818 16 21--02/3
Page 4
Control Panel
A BCDE F G H I
A. Thermometer
Displays the warmest temperature inside the freezer.
B. Alarm shut-off button
Used to turn the audible alarm off.
C. Red warning lamp
Flashes when one of the alarms in the cabinet has
been triggered.
D. FAST FREEZE button
Used to switch the fast Freeze feature on and off.
E. Yellow indicator lamp
Lights when fast Freeze is operating.
Before use
ALARM SUPER ON
F. Green indicator lamp
Lights when the freezer is operating.
G. Thermostat control
Usetoswitchonandsetthedesiredtemperaturein
the freezer .
H. Green indicator lamp
Lights when the fridge is operating.
I. Thermostat control
Usetoswitchonandsetthedesiredtemperaturein
the fridge.
ON
GB
Position and clean the cabinet as explained in the
section "Installation".
Check that the drain hose at the rear of the cabinet
discharges into the drip tray.
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 30 minutes, or for 4 hours if it
was transported horizontally. Otherwise
the compressor may sustain damage.
This time will allow the oil sufficient
time to return to the compressor.
Using fridge
To start the fridge and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control results
in the highest temperature inside the cabinet.
MAX
The highest position of the thermostat control results
in the lowest temperature inside the cabinet.
H :
Switched off.
GB
32
Electrolux 818 16 21--02/3
Page 5
Temperature inside the fridge
A suitable temperature inside the fridge is approx.
+5°C. If the thermostat control is set to a too cold
temperature, food with a high water content may
start to freeze if it has been placed in the coldest
places in the fridge. The picture shows the coldest
and warmest places inside the fridge.
(+ warm, - cold)
Meat, fish and milk should be put in the coldest part
of the cabinet.
The temperature will be affecteed by:
· How often the door is opened
· How much food is stored
· Position of the appliance (See chapter
Installation)
Measuring the temperature
If the temperature is measured using a standard,
single thermometer, this should be put in a glass of
water centrally placed inside the cabinet. This will
reflect the temperature inside the food products. Do
not place the t hermometer hanging or lying directly
on the shelf.
+
+
--
--
--
--
+
+
+
Hints:
· Distribute foodstuffs to allow cold air to
circulate freely between the products.
· Do not place food products directly against the
cooling plate on the rear wall since they may
freeze in this case.
· Also never put warm products into the cabinet.
Wait until they have cooled down.
· Cover all foods properly to avoid odours and
flavours from tainting other food.
Switching off
Turn the control anti-clockwise past the click
position t o "H".
Unplug the power supply plug from the wall socket
or, alternatively, remove the fuse.
Cabinet interior
The shelves and door compartments are removable
and can easily be re-arranged.
Certain shelves must be lifted up by the rear edge to
enable them to be removed.
The lower door compartment and the glass shelf
above the vegetable drawer must not be moved.
They are required for proper air circulation inside the
cabinet.
Shelves with a raised edge should be placed with the
raised edge facing the rear wall of the cabinet, and
thus prevent food products from touching the
cooling plate.
33
Electrolux 818 16 21--02/3
Page 6
Model ER9096
Hanging half-shelf
The half-shelf can be moved sideways. It can be
hung under all door shelves, except the lowest one.
Model ER9096
Cooling Rack for Beverages
To achieve maximum cooling in t he cooling rack,
heed the following:
· Place the rack immediately under the drip
channel.
· Be sure the rack is cold before placing bottles
and cans, that you want to cool, on it.
· Place large cans and bottles in the big
recesses in the middle of t he rack.
· Place small cans and bottles in the small
recesses close to the cabinet wall.
Do notput the coolingrackin a
freezer to achieve quicker cooling.
Do not put loads heavier than
6.5kg onto the shelf
.
Using the freezer
To start the freezer and set the
correct temperature
Turn the thermostat control to the desired position.
MIN
The lowest position of the thermostat control results
in the highest temperature inside the cabinet.
MAX
The highest position of the thermostat control results
in the lowest temperature inside the cabinet.
H :
Switched off.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be
sure that the temperature inside the freezer is -18°C
or below. Please note, however, that the energy
consumption increases as the temperature decreases.
The built-in temperature display shows the warmest
temperature inside the freezer. If the temperature is
measured using a thermometer, put it between the
products since this will reflect the real temperature
in the frozen products. It is normal that the built-in
temperature display shows a temperature slightly
above that measured in other ways.
GB
Switching off
Turn the control anti-clockwise past the click
position t o "H".
Unplug the power supply plug from the wall socket
or, alternatively, remove the fuse.
34
Electrolux 818 16 21--02/3
Page 7
Alarms and other features
Temperature alarm
The warning lamp lights and an alarm sounds if it
gets warmer than -12°C.
Switching off the audible alarm: Press the switch-off
button. The red warning lamp goes out when it
becomes colder than -13°C.
Freezing
You need not press the fast-freezing button when
freezing smaller quantities of food during any
24-hour period.
In all other cases, press the fast-freezing button
approx. 24 hours prior to placing the food in the
freezer .
Fast-freezing is automatically switched of 48 hours
after the button has been pressed.
Fast-freezing can be discontinued by pressing the
fast-freezing button once again.
The yellow fast-freezing lamp remains lit as long as
the fast-freezing button is engaged.
Practical advice on freezing
· When freezing products, use the top shelf, and if
necessary the shelf beneth that.
· Place the foods directly on the freezer shelves.
· Spread out the products as much as possible to
allow air to circulate between them.
· Do not place food products which are to be
frozen directly against other frozen food.
The heat from the unfrozen food may cause
the frozen food to thaw on the surface.
· Once frozen, re-arrange the products and put
them as close as possible to each other.
The food will then stay cold longer in the
event of a power failure.
· When freezing large amounts of food/provisions,
the accumulator moves to the tray/space nearest
to the lower freezing shelf.
· Do not freeze too much food at the same time.
The freezing capacity of the unit is indicated in
the specifications section.
Check that the cabinet is operating and
keeps the set temperature one day after
switching it on for the first time. Only
after then should the freezer be used to
freeze fresh foodstuff.
Suitable storage periods
Food purchased in frozen condition: Follow the
advice on the maximum storage period indicated on
the packaging.
Food frozen at home:
Fatty and salty food should not be kept frozen for
more than three months. Cooked food and low-fat
food may be kept up to about six months. Lean food
and berries can be kept for approximately one year.
Thawing
It is best to use the fridge to thaw food. Place the
foodstuff on a plate with a raised edge to prevent
liquids from running out. To quickly thaw food, put
it in room temperature or i n cold water. When using
a microwave oven to thaw foodstuff, follow t he
manufacturer's instructions.
35
Electrolux 818 16 21--02/3
Page 8
Cabinet interior
Freezer drawers
The freezer drawers make it easy to quickly and
easily find the food package you want. To gain
space, the drawers can be removed and the products
can be put directly on the shelves. On all shelves,
except the top shelf, it is possible to place products
that protrude 20 mm from the front edge. This
allows maximum use of the available space.
Do not remove the bottom drawer. It is required to
assure proper air circulation.
Freezer tray
Use the freezer tray to freeze berries and vegetables.
After about 4 hours the food will be thoroughly
frozen and can then be packaged normally. Food
that is frozen in this way will not stick together,
enabling you to use only the amount required.
Ice cubes
Fill the ice tray to max. 3/4 since water expands as it
freezes. Release the ice cubes by twisting the ice
tray.
If ice cubes are kept for a long time, they will dry
out and the taste is affected. Thus, throw away old
ice cubes and prepare new ones when needed.
Hints and Tips
Saving energy
· Pay careful attention to where the cabinet is
placed. See the section "Installation". When
installed correctly, the cabinet will consume less
energy.
· Try to avoid keeping the door open for long
periods, or opening the door to frequently as
warm air will enter the cabinet, and cause the
compressor to switch on unnecessarily often.
· Ensure there are no obstructions prevending the
door from cloosing properly.
· Thaw frozen food in the fridge. This will ensure
safer defrosting of foods and reduce the work of
the refridgeration unit
· It is advisable to periodically clean the
refrigeration systemat the back of the appliance
with a duster or vacuum cleaner.
· Always leave warm food to cool down to room
temperature before placing in the fridge.
· Food which is to be frozen (when cool) should
be placed in the fridge before being transfered to
the freezer .
· Avoid unnecessary frosting in the cabinet by
packing all foodstuffs into airtight packages
before placing them in the freezer.
· Carefully follow the advice on freezing products
in the section "Using the freezer". This will
prevent wasting energy.
GB
· Do not set the temperature too low in the freezer.
A suitable temperature is in the range of -18°C
to -20°C .
· Defrost the freezer when the frost layer reaches a
thickness of 3-5 mm.
· Make sure the door gasket is complete and
always clean.
36
Electrolux 818 16 21--02/3
Page 9
Food Storage
· To obtain the best results from your appliance,
neither hot foods nor liquids which may evaporate,
should be placed in the larder compartment.
· Avoid buying frozen food if you can not store it
straight away. The use of an isulated container is
advisable. When you arrive home place the frozen
food in the freezer immediately.
· Ensure that food placed in the freezer is dated and
labelled and used in date order to ensure that food is
consumed at its best.
Remove suspect food from you refrigerator and
clean, refer to cleaning and maintenance.
Protect the environment
· Hand over the cabinet packaging and discarded
fridges and freezers to a recycling station.
Contact your local city office or your closest
dealer for more information.
· Keep foodstuff in re-usable containers. Cut down
on disposable material as much as possible.
· When cleaning the cabinet, use a mild
washing-up detergent.
· Follow the advice in the section "Saving energy"
· The door gasket and coolant used in this
cabinet will not harm the ozone layer.
· All parts in the packaging can be recycled.
· The cabinet has been designed for easy
dismantling and subsequent recycling.
Maintenance and Cleaning
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash
the grille.
Unsnap the ventilation grille by pulling it toward
you.
Cleaning
Clean the cabinet at regular intervals.
Do nt use detergents, abrasive powers,
high perfumed cleaning products, wax
polishes or cleaning products
containing bleach or alcohol when
cleaning the product
Disconnect the appliance from electricity supply.
Internal Cleaning
Clean the inside and accossories with warm wather
and bicarbonate of soda (5ml to 0,5 liter water) Rise
and dry thoroughly.
Regularly check the door seals and wipe clean to
ensur they are clean and free from debris.
Clean out the drip channel inside the fridge at
regular intervals and ensure that the drip channel is
clear att all times. If bocked carefully clear using a
piece of flexible curtain wire inserted into the drain
outlet to remove the blockage.
External Cleaning
Wash the outer cabinet with warm sopy water.
Remove the ventilation grille (see the section
"Removing the ventilation grille") and vacuum-clean
under the cabinet. Twice a year pull out the cabinet
from the wall and vacuum-clean the backside of the
cabinet, the refrigerating system and the compressor.
When moving the cabinet, lift it by
the front edge to avoid scratching the
floor.
GB
37
Electrolux 818 16 21--02/3
Page 10
Defrosting the fridge
The fridge is defrosted automatically every time the
compressor stops. Frost formation can be prevented
by:
· not putting warm foodstuff inside the cabinet.
· avoiding frequently opening the door or keeping
it open too long.
· do not place foodstuffs directly against the cold
cooling plate.
Defrosting the freezer
A certain amount of frost will always form on the
freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a
thickness of about 3-5 mm.
Remove the freezer drawers and place them on top
of each other by turning every other drawer one half
turn. Put insulating material around the drawers, e.g.
blankets or newspapers.
The frozen products can also be packed closely
together and be kept in a cold location, e.g. in the
fridge.
Defrosting can be accelerated by placing bowls with
hot water (not boiling) inside the freezer.
Take out the drain spout and place it in the bottom
freezer drawer where water can collect.
Loosen the ventilation grille to enable the bowl to fit
under the drain spout.
Carefully scrape off t he ice when it starts to thaw.
Use a wood or plastic scraper. Do not use sharp
objects as these may damage the interior.
When all the ice has melted, clean and wipe the
cabinet dry, then push the drain spout back in place.
Switch on the cabinet and replace the frozen
foodstuff.
To Change the Light Bulb
The light is switched on automatically when the
door is opened. Before replacing the light bulb,
disconnect the power plug from the outlet.
2. Cut the packaging around the bulb socket.
3. Keep the packaging on to hold the bulb when
setting it into the socket. Do not touch the bulb with
your bare fingers. Halogen light bulbs are sensitive
to grease from the skin.
Use a clear, UV-blocked, low-pressure type halogen
light bulb. Socket G4. Voltage 12 V. Power rating
10 W/bulb. (available from your local Service Force
Center.)
Never use a hair drier or other heating
appliances to speed up defrosting. Excessive
heat may damage the plastic interior, and
humidity could enter the electric appliance
making it live.
When the appliance is not in use
Disconnect the appliance from electricity supply.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside
from spoiling in case of a power failure.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
38
Electrolux 818 16 21--02/3
Page 11
Something Not Working
Before contacting your local Service Force Center check the following point:
Problem Possible cause / Remedy
GB
Audible alarm + flashing red warning
lamp. (It is too warm inside the freezer.)
It is too warm inside the refrigerator. Set a lower temperature.
It is too cold inside the refrigerator. Set a higher temperature.
There is water on the cooling p late inside
the refrigerator.
Water is running inside the refrigerator. Clean the water drain and drain hole inside the refrigerator
Switch off the audible alarm by pressing the alarm shut-off
button.
The audible alarm could have been triggered by:
The cabinet having been recently switched on and the
temperature still being too high. See the chapter "Switching on
and setting the temperature".
The door may have been open for so long that the `door open'
alarm was triggered.
Put food products in the right place inside the refrigerator. See
the chapter "Temperature inside the refrigerator".
Distribute the food products to allow cold air to circulate
around them.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
Vegetables and other products that are easily frozen have been
placed on a "too cold" shelf. See the chapter "Temperature
inside the refrigerator".
This is normal. During automatic defrosting, frost thaws on the
cooling plate.
using e.g. cotton swabs or a bottle cleaner brush.
Some food products could have been placed causing the water
from running into the drain.
Water comes out on the floor. Place the drain hose at the back of the cabinet above the drain
bowl. See the chapter "Before using the cabinet the first time".
It is too warm inside the freezer. Set a lower temperature.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
If warm food products have been put inside the freezer, wait for
a couple of hours and then check the temperature again.
Distribute the food products to allow cold air to circulate
around them.
It is too cold inside the freezer. Set a higher temperature.
Action Freeze could have been switched on.
Too much frost and ice are produced. Make sure that the door is completely closed and that the
insulating strip is complete and clean.
Set a higher temperature.
The compressor operates continuously. Set a higher temperature.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
The temperature where the cabinet is placed is above normal
room temperature.
39
Electrolux 818 16 21--02/3
Page 12
The cabinet does not operate at all.
Cooling or interior light does not
operate. No indicator lamps light.
Sound level in cabinet is too high. The refrigerating system will always produce some sounds. A
Power failure Do not unnecessarily open the cabinet, except when the power
The power plug is not properly connected.
The fuse has blown.
The cabinet is not switched on.
Power does not reach the cabinet. (Try connecting another
electrical device to the power outlet.)
pulsing sound is heard when coolant is pumped inside the
cooling pipes. A ticking sound from the thermostat can be
heard when the compressor switches on and off. The sound
level varies depending on the operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the cabinet not touch each
other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes)
come loose, put them back in place again.
Carefully follow the instructions in the chapter "Installing the
cabinet".
outage seems to be long, in which case the food products
should be moved to another cabinet that works. In case the
frozen products are still hard following the power outage, they
may be immediately refrozen. If the food products have thawed
but still are fresh and smells alright, they may be used,
however they should be prepared before re-freezing or eating
them.
Guarantee Conditions
See Guarantee Conditions on the Registration Card.
ServiceandSpareParts
In the event of your appliance requiring service, or
if oyu wish to purchase spare parts please contact
your local Electrolux Service Force Centre by
telephoning:
XXXXXXXXXXX
Your call be routed the Service Force Centre
covering your post code area. The address of your
local Service Force Center ids detailed in the
accompanying Customer Care Book.
Before calling out an engineer, please ensure you
have read the details under the heading "Something
Not Working"
When you contact the Service Center you will need
to give the following details.They will be found
inside your appliance.
MOD (modell):.....................................................
PROD.NO (model number):..................................
SER:NO (serial number):.......................................
Purchase date............................................................
40
Electrolux 818 16 21--02/3
Page 13
Technical specification
GB
Model ER9096BA, ER9096BE,
ER9096BG
Gross volume 291 l
85 l
Width 595 mm 595 mm
Height 1950 mm 1850 mm
Depth 600 mm 600 mm
Energy consumption 365 kWh/year 420 kWh/year
Energy class A B
Rated power 160 W 160 W
Weight 91 kg 90 kg
Freezing capacity 12 kg/24 hours 12 kg/24 hours
Number of compressor 2 2
ER8496BA
213 l
97 l
Installation
Unpacking
Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
GB
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Mounting the handles
The handles are included in the packaging material
of the cabinet.
Proceed as follows:
1. Unscrew the screws on the side of the door where
the handle will be placed.
2. Secure the handle.
41
Electrolux 818 16 21--02/3
Page 14
Remove the transport supports
Remove the tape and the transport supports from
· the door sides
· inside the door hinges
· the shelves
Remove the transport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops at the protuberance of the shelf.
Take hold of the rear edge of the glass shelf and pull
the shelf and transport support forward until the
shelf tilts and the transport support can be removed.
Some models are fitted with a silencing pad under
the cabinet. Do not remove this pad.
Cleaning
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
Installing the cabinet
To otain the best performance from the cabinet, ensure
:
· the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.
· the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.
· the room in which the cabinet is placed
has a temperature of +16Cto+32C.
· the cabinet is level.The cabinet should not lean
against any wall. If necessary adjust the
feet using the supplied adjustment spanner.
· there is good air circulation around the cabinet
and that the air channels below and behind
the cabinet are not blocked. The ventilation
space above the cabinet and any
grocery/top cabinet must be at least 200 cm@.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cabinet. In this case,
the space behind the cabinet must be at least
50 mm deep.
If the cabinet is placed in a corner and the side with
the hinges faces the wall, the distance between the
wall and the cabinet must be at least 10 mm to allow
the door to open enough so that the shelves can be
removed.
Check that the drain hose at the rear of the cabinet
discharges into the drip tray.
a)
b)
50mm
42
Electrolux 818 16 21--02/3
Page 15
Electrical connection
Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the letter
This appliance must be earthed.
If the plug that is fitted t o your appliance is not
suitable for your socket outlett, it must be cut of and
the appropriate plug fitted.
Remove the fuse from the cut off plug.The cut off
plug should then be disposed of to prevent the
hazard of socket inanother part of your home.
The wires in the mains lead are coloured in
accordance with the following code:
Green and yellow -Earth
Blue -Neutral
Brown -Live
If you fit your own plug, the colours of the Wires in
the mains lead of your appliance may not
correspond with the markings identifying the
terminals in your plug, proceed as follows:
Door Reversal
1. Close the cabinet and pull out the plug from the
electrical outlet.
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Remove it and put it
on the other side.
3. Put the cabinet on a wooden board when it is laid
down. Later, when raising the cabinet, it will be
easier to grip under the cabinet thanks to the board.
"E" or the earth symbol
yellow.
Connnect the blue (neutral) wire to the terminal in
the plug which is marked with the letter "N" or
coloured black
Connect the brown (live) wire to the terminal in the
plug which is marked with the letter "L" or coloured
red.
The plug moulded onto the lead incorporates a fuse.
For replacement, use a 13amp BSI362 fuse. Onely
ASTAor BSI approved fuses should be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the plug.
A replacement cover/carrier must be obtained from
your local Service Force Centre.
1
2
3
or coloured greeen and
4. Unscrew the lower hinge and remove the lower
door. Unscrew the upper hinge pin and remove the
upper door.
5. On the centre beam:
Remove the plastic plugs by driving a drift into them
and rocking them loose.
Move the centre hinge unit to the other side. Flatten
the threads in the holes remaining from the hinges
and insert new plastic plugs.
4
5
43
Electrolux 818 16 21--02/3
Page 16
6. Unscrew the cover washer on top of the cabinet
and move it to the other side. Replace the upper door
and secure the upper hinge pin.
Replace the lower door. Change the position of the
hinge pin of the lower hinge. Then secure the hinge.
7. Raise the cabinet and replace the ventilation grille.
Model ER9096
8. New handles for the other s ide may be purchased
from your dealer.
1. Unscrew the handles and keep them for possible
future use.
2. Carefully press in the plastic plugs into the holes
on the opposite side using a drift.
3. Secure the handles. Press in the enclosed plastic
plugs into the holes to which the handles were
previously fitted.
Model ER8496
8. Switching the handle positions (when both doors
are of same size)
1. Unscrew the handles.
2. Carefully press in the plastic plugs into the holes
on the opposite side using a drift.
3. Secure the handles on the opposite side.
4. Press in the enclosed plastic plugs into the holes
to which the handles were previously fitted.
6
8
8
9. Put the cabinet in position. Check that it stands
straight. See the section "Positioning the cabinet".
44
Electrolux 818 16 21--02/3
Page 17
SpoloËnosª Electrolux je najv‰ËπÌ svetov˝ v˝robca kuchynsk˝ch spotrebiËov, vys·vaËov, zariadenÌ na
pranie a techniky pre les a z·hradu. Kaæd˝ rok k˙pia z·kaznÌci od Electrolux Group viac ako 55 miliÛnov
spotrebiËov (ako s˙ chladniËky, spor·ky, pr·Ëky, vys·vaËe, reªazovÈ pÌly a kosaËky) v hodnote pribliæne
14 mili·rd USD v takmer 150 krajin·ch na celom svete.
Tento výrobok je certikovaný v Štátnej skúšobni č. 104 v Piešťanoch.
104
99
MARIESTAD DD--AV
Loading...