AEG EHG90839X User Manual

Download

2 electrolux

electrolux 3

Welcome to the world of Electrolux

Thank you for choosing a first class product from Electrolux, which hopefully

will provide you with lots of pleasure in the future.

The Electrolux ambition is to offer a wide variety of quality products that make

your life more comfortable.

You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine.

We promise that it will provide a superior User Experience delivering Ease-ofMind.

Good luck!

4 electrolux

Contents

For the User

Important Safety Information ............................................................................. 5

Operation .......................................................................................................... 7

Using the hob correctly ..................................................................................... 9

Cleaning and Maintenance .............................................................................. 10

European Guarantee ....................................................................................... 22

For the Installer

Technical data ................................................................................................. 12

Installation ....................................................................................................... 14

Gas Connection .............................................................................................. 15

Electrical Connection ....................................................................................... 18

Building In ....................................................................................................... 19

Possibilities for insertion .................................................................................. 21

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

)

Hints and Tips

Environmental information

This appliance complies with the following E.E.C. Directives:

• 2006/95 (Low Voltage Directive);

• 89/336 (Electromagnetical Compatibility Directive);

• 93/68 (General Directives) and subsequent modifications.

MANUFACTURER:MANUFACTURER:

MANUFACTURER:

MANUFACTURER:MANUFACTURER: ELECTROLUX HOME PRODUCTS ITALY S.p.A. Viale Bologna, 298 47100 FORLÌ (Italy)

It is very important that this instruction book should be kept safely for future consultation. If the appliance should be sold or given to another person, please ensure that the booklet goes together with it, so that the new owner can know of the functions of the machine and also be aware of the warnings.

These instructions are only for the countries stated by the symbol printed on the front cover of this instruction book.

electrolux 5

English

Important safety information

This warnings has been given for the safety of you and others. We therefore ask you to carefully read the procedures of installing and using this cooker.

Installation

z The work of installation must be

carried out by competent and qualified

installers according to the regulations

in force.

• Any modifications to the domestic

electrical mains which may be

necessary for the installation of the

appliance should be carried out only

by competent personnel.

During Operation

• This appliance has been designed for

non professional purpose in private

houses only. It is meant to cook edible

foodstuff only and must not be used

for any other purposes.

• It is dangerous to alter the specification

in any way.

• For hygiene and safety reasons, this

appliance should be kept clean at all

times. A build-up of fats or other

foodstuff could result in a fire.

• Under no circumstances should you

attempt to repair the appliance

yourself. Repairs carried out by

unexperienced persons may cause

injury or serious malfunctioning. Refer

to your local Service Centre. Always

insist on genuine spare parts.

• Ensure that all control knobs are in the

OFF position when not in use.

• Should you connect any electrical tool

to a plug near this cooking appliance,

ensure that electric cables are not in

contact with it and keep them far enough from the heated parts of this appliance.

• If the appliance is out of order, disconnect it from the electric supply.

People Safety

• This appliance has been designed to be operated by adults and children under supervision. Young children must not be allowed to tamper with the controls or play near or with the oven.

• This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.

• Accessible parts of this appliance may become hot when it is in use. Children should be kept away until it has cooled.

About Installation, Cleaning and Manteinance

z It is mandatory that all operations

required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations.

• Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.

• Ensure a good ventilation around the

6 electrolux

appliance. A poor air supply could cause lack of oxygen.

• Ensure that the gas supply complies with the gas type stated on the identification label, placed near the gas supply pipe.

• This appliance is not connected to a combustion products evacuation device. It must be installed and connected in accordance with current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.

• The use of a gas cooking

appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).

• Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

• Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation.

• The manufacturer disclaims any

responsability should all the safety measures not be carried out.

Environmental Information

z After installation, please dispose of

the packaging with due regard to safety and the environment.

• When disposing of an old appliance, make it unusable, by cutting off the cable.

The symbol on the product or

on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Service

• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by unexperienced persons may cause injury or serious malfunctioning. Refer to your local Service Centre. Always insist on genuine spare parts.

Operation

Hob burner control knobs

The symbols on the knobs mean:

= no gas supply = maximum gas supply

= minimum gas supply

For easier lighting, proceed before putting a pan on the pan support.

Lighting the burners

)

To light a burner, turn the relevant

knob anticlockwise to maximum position ( ) and push down the knob to ignite.

After lighting the flame, keep the

knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig - D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted. Then, check the flame is regular and adjust it as required.

If you cannot light the flame even

after several attempts, check the "cap" (Fig - A) and “crown” (Fig - B) are in the correct position.

In the absence of electricity, ignition

can occur without the electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position.

electrolux 7

A - Burner cap B - Burner crown C - Ignition candle D - Thermocouple

Triple Crown Burner

To switch off burners

)

To put the flame out, turn the knob to

the symbol ( ).

Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.

8 electrolux

When switching on the mains, after installation or a power cut, it is quite normal for the spark generator to be activated automatically.

Do not keep the control knob pressed for more than 15 seconds. If the burner does not light even after 15 seconds, release the control knob, turn it the "off" position and wait for at least one minute before trying to light the burner again.

If the burner accidentally goes out, turn the control knob to the "off" position and wait for at least 1 minute before trying to light the burner again.

Make sure pots do not protrude over the edges of the cooktop and that they are centrally positioned on the rings in order to obtain lower gas consumption.

Using the hob correctly

Practical hints

The burners

To ensure maximum burner

efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used.

Triple Crown Burner

diameter 18-26 cm

Rapid Burner

diameter 18-26 cm

Semi-rapid Burner

diameter 12-22 cm

Auxiliary Burner

diameter 8-18 cm

• For easier lighting, proceed before putting a pan on the pan support.

• Use only pans or pots with flat bottom.

• Take care when frying food in hot

oil or fat, as the overheated splashes could easily ignite.

• If you use a saucepan which is smaller than the recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat.

• Prolonged cooking with potstones, earthenware pans or cast-iron plates is inadvisable. Also, do not use aluminium foil to protect the top during use.

• Make sure pots do not protrude over

the edges of the cooktop and that they are centrally positioned on the rings in order to obtain lower gas consumption.

• Do not place unstable or deformed pots on the rings: they could tip over or spill their contents, causing accidents.

• Pots must not enter the control zone.

electrolux 9

• If the control knobs become difficult to turn, please contact your local Service Force Centre.

• As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.

10 electrolux

Cleaning and Mainteinance

Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work.

The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.

This appliance cannot be cleaned with steam or with a steam cleaning machine.

The burners

z The burner caps and crowns can be

removed for cleaning.

z Wash the burners taps and crowns

using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove.

z After cleaning, be sure to wipe dry

with a soft cloth.

z Frequently wash the "caps" and the

"crowns" with hot soapy water, carefully taking away any built-up of food.

YES

The pan supports

z After cleaning, make sure that the

pan supports are correctly positioned.

z To make burners work properly,

ensure that pan supports are placed in a way that the arms are centred upon the burner as shown in the picture.

z Pay attention when replacing the

pan supports in order to avoid damaging the hob top.

Hobs with cast iron pan supports: after cleaning, place the pan supports back on their position.

The Hob Top

z Regularly wipe over the hob top

using a soft cloth well wrung out in warm water to which a little wasing up liquid has been added. Avoid the use of the following:

- household detergent and bleaches;

- impregnated pads unsuitable for non-stick saucepans;

- steel wool pads;

- bath/sink stain removers.

z Should the hob top become heavily

soiled, the following products are recommended:

- For stainless steel hobs use a proprietary stainless steel cleaner.

- For other hobs use Hob Brite or Bar Keepers Friend.

z Do not leave acid or alkaline

substances (e.g. vinegar, salt, lemon juice, etc.) on the cooktop.

The Ignition electrode

The electric ignition is obtained through a ceramic electrode with a metal electrode (Fig. page 7- C). Keep these components very clean, to avoid difficult lighting, and check that the burner crown holes (Fig. page 7- B) are not obstructed.

electrolux 11

12 electrolux

Technical data

Burner gas power

Triple crown burner 4,0 kW Rapid burner 3,0 kW Semi-rapid burner 2,0 kW Auxiliary burner 1,0 kW

Category II2H3+ Gas supply gas LPG 28-30 / 37mbar Gas connection G 1/2" Electric supply 230 V ~ 50 Hz Appliance class 3

Hob dimensions

Width 894 mm Depth 510 mm

Cut out dimensions

Width 830 mm Depth 480 mm

Gas burners

electrolux 13

BURNER RAPID SEMI-RAPID

TYPE OF GAS

POSITION MAX MIN MAX MIN MAX MIN MAX MIN

NOMINAL THERMAL

NATURAL GAS

20 mbar

VALUE =

37.78 MJ/m

Ws - 50.7 MJ/ m

LPG GAS

28-30/37 mbar

VALUE =

49.92 MJ/Kg

POWER kW 3.0 0.75 2.0 0.45 1.0 0.33 4.0 1.2

NOMINAL FLOW RATE m3/h 0.286 0.057 0.190 0.038 0.095 0.028 0.381 0.114

NOZZLE REFERENCE 11 9 Adjust. 9 6 Adjust. 7 0 Adjust. 14 6 Adjust.

1/100 mm

NOMINAL THERMAL POWER kW 2.8 0.75 2.0 0.45 1.0 0.33 4.0 1.2

NOMINAL FLOW RATE g/h 2 0 2 4 3.5 1 4 4 2 9 7 2 21,5 2 91 8 7

NOZZLE REFERENCE 8 6 1/100 mm

By-pass diameters

Burner Dia. Tap By-pass

1/100 mm

AUXILIARY TRIPLECROWN

7 1 3 2 5 0 2 8 9 8 5 6

Auxiliary 28 Semi-rapid 32 Rapid 42 Ultra-rapid 56

Aeration adjustment none

14 electrolux

Installation

z The following instructions about

installation and maintenance must be carried out by qualified personnel in compliance with the regulation in force.

z The appliance must be electrically

disconnected before all interventions. If any electric supply to the appliance is required to carry out the work, ensure all the necessary precautions are followed.

z The side walls of the unit in which

the hob is going to be installed, must not exceed the height of the working top.

z Avoid installing the appliance in

the proximity of inflammable materials (e.g. curtains, tea towels etc.).

THE MANUFACTURER WILL NOT ACCEPT LIABILITY, SHOULD ANY OF THE OTHER SAFETY INSTRUCTIONS INCORPORATED IN THIS BOOKLET OR THE REGULATION IN FORCE BE IGNORED.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper. The connection should be suitable for connecting to RC 1/2 (1/2 BSP male thread). When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installation. Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the hob connecting pipe. Failure to ensure the correct assembly will cause leakage of gas.

A) End of shaft with nut B) Washer C) Elbow

Conversion from LPG to Natural Gas

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a competent person.

electrolux 15

It is important to note that this model is designed for use with LPG gas but can be converted for use with Natural gas providing the correct injectors are fitted and the gas rate is adjusted to suit. Replace the rating label (placed near the gas supply pipe) with the relevant one for the new type of gas supply. You can find this label in the package of the injectors supplied with the appliance.

A. Injectors replacement

)

• Ensure that the gas taps are in the

'OFF' position

• Isolate the hob from the electrical

supply

• Remove all pan supports, burner

caps, rings, crowns and control

knobs.

16 electrolux

• With the aid of a 7mm box spanner

the burner injectors can then be

unscrewed and replaced by the

appropriate Natuaral gas injectors

(Fig.1).

B. Adjustment of minimum

)

level

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

- Turn the gas tap to the MAX position

and ignite.

- Set the gas tap to the MIN flame

position then turn the control knob

from MIN to MAX several times. If the

flame is unstable or is extinguished

follow the procedure below.

Procedure:

- Re-ignite the burner and set to MIN.

- Remove the control knob and use a

thin bladed screwdriver to turn the

adjustment screw until the flame is

steady and does not extinguish, when

the knob is turned from MIN to MAX.

- The adjustment screw may be

located at the centre of the gas tap

control shaft or on the gas tap body,

left of the control shaft or below

(Fig.2).

- Repeat the adjustment procedure for

all burners.

Fig. 1

Fig. 2

Minimum adjustment screw

To adjust the gas rate

To adjust the minimum level of the burners, proceed as follows:

• Light the burner.

• Turn the knob on the minimum

position.

• Remove the knob.

• With a thin screwdriver, adjust the by-

pass screw.

If changing from LPG to natural gas

unscrew about 1/4 turn the by-pass

screw, until a small regular flame is

obtained.

If changing from natural gas to LPG,

completely tighten clockwise the

screw, until a small regular flame is

obtained.

• Finally check the flame does not go

out when quickly turning the knob

from the maximum position to the

minimum position.

This procedure can easily be carried out, anyhow the hob has been positioned or built in the working top.

electrolux 17

18 electrolux

Electrical Connection

The appliance is designed to be connected to 230 V monophase electricity supply.

The connection must be carried out in compliance with the laws and regulations in force.

Before the appliance is connected:

1) check that the main fuse and the domestic installation can support the load (see the rating label);

2) check that the power supply is properly earthed in compliance with the current rules;

3) check the socket or the double pole switch used for the electrical connection can be easily reached with the appliance built in the forniture unit.

The appliance is supplied with a connection cable. This has to be provided with a proper plug, able to support the load marked on the identification plate. To connect the plug to the cable, follow the recommendation given in Fig. 3a. The plug has to be fitted in a proper socket.

If connecting the appliance directly to the electric system, it is necessary that you install a double pole switch between the appliance and the electricity supply, with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current rules.

The connection cable has to be placed in order that, in each part, it cannot reach a temperature 50°C higher than room temperature.

The brown coloured phase cable (fitted in the terminal block contact marked with "L") must always be connected to the network phase.

Remplacement of the voltage cable

The connection of the voltage cable to the appliance's terminal block is of type "Y". This means that its replacement requires the specific equipment of a technician. In this case, only cable type H05V2V2-F T90 must be used. The cable section must be suitable to the voltage and the working temperature. The yellow/green earth wire must be approximately 2 cm. longer than the phase wires (Fig. 3-a).

To open the terminal block and reach the terminals, proceed as follows:

z insert the point of a screwdriver into

the visible protrunding part of the

terminal block;

z exert a light pressure and lift (Fig. 3-b)

Neutral

Earth

Fig. 3-a

Fig. 3-b

(yellow/green))

Building In

electrolux 19

894

A = Auxiliary burner SR= Semi-rapid burner R = Rapid burner TC= Triple Crown burner

These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hob dimensions are shown in Fig. 4.

The edge of the cut out must have a minimum distance from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near the hob, the cut out edges must have a minimum distance of 150 mm.

Hanging forniture units or hoods must be placed at 650 mm. minimum from the hob (Fig. 5).

Fitting the hob to the worktop

Carry out the building in of the hob as follows:

1. Place the seals supplied with the hob

on the front edge of the cut out.

Then, place them at 27 mm from the

side edges and at 10 mm from the

rear edge, as shown in the diagram

510

Fig. 4

Dimensions are given in millimeters

Fig. 5

20 electrolux

(Fig.6), taking care that the seals

meet without overlapping.

2. Place the hob in the cut out, taking

care that it is centred.

3. Fix the hob with the relevant fixing

clamps, supplied with the injectors

kit (Fig.7). When the screws have

been tightened, the excess seal can

be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

27 27

Fig. 6

a) seal

Fig.7

Possibilities for insertion

Kitchen unit with door

Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 8. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed.

Kitchen unit with oven

The hob recess dimensions must comply the indication given in Figs. 9 and 10 and must be provided with brackets to allow a continuous supply of air. The hob's electric connection and the oven's one must be carried out separately, both for safety reasons and to allow the oven to be easily taken off the unit.

electrolux 21

Fig. 8

a) Removable panel b) Space for connections

Fig. 9

Fig. 10

22 electrolux

European guarantee

This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of the countries listed below the appliance guarantee will move with you subject to the following qualifications:

• The appliance guarantee starts from the date you first purchased the appliance

which will be evidenced by production of a valid purchase document issued by the

seller of the appliance.

• The appliance guarantee is for the same period and to the same extent for labour

and parts as exists in your new country of residence for this particular model or

range of appliances.

• The appliance guarantee is personal to the original purchaser of the appliance and

cannot be transferred to another user.

• The appliance is installed and used in accordance with instructions issued by

Electrolux and is only used within the home, i.e. is not used for commercial

purposes.

• The appliance is installed in accordance with all relevant regulations in force within