Page 1
instruction booklet
GB
IE
gas hobs
EHG 60412
Page 2
2 electrolux
Page 3
electrolux 3
Welcome to the world of ElectroluxWelcome to the world of Electrolux
Welcome to the world of Electrolux
Welcome to the world of ElectroluxWelcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which
hopefully will provide you with lots of pleasure in the future.
The Electrolux ambition is to offer a wide variety of quality products that
make your life more comfortable.
You find some examples on the cover in this manual. Please take a few
minutes to study this manual so that you can take advantage of the benefits
of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind.
Good luck!
Page 4
4 electrolux
Contents
Important Safety InformationImportant Safety Information
Important Safety Information
Important Safety InformationImportant Safety Information
Description of the Hob .......................................................................... 7
Instructions for the UserInstructions for the User
Instructions for the User
Instructions for the UserInstructions for the User
Operation ..............................................................................................8
Maintenance and Cleaning ................................................................. 10
Something Not Working? ....................................................................12
Service and Original Spare Parts........................................................ 26
Instructions for the InstallerInstructions for the Installer
Instructions for the Installer
Instructions for the InstallerInstructions for the Installer
Engineer technical data....................................................................... 13
Important safety requirements ............................................................ 15
Installation ............................................................................................ 16
Gas Connection................................................................................... 17
Fitting the Hob into the Worktop.......................................................... 18
Building In ........................................................................................... 19
Electrical Connections.........................................................................20
Wiring diagram ...................................................................................21
Fault Finding ........................................................................................ 22
Commissioning.................................................................................... 25
Conversion from Natural Gas to LPG .................................................26
Guide to Use the instructionsGuide to Use the instructions
Guide to Use the instructions
Guide to Use the instructionsGuide to Use the instructions
..................................................................................................................
.........................................................
..................................................................................................................
..................................................................................................................................
.................................................................
..................................................................................................................................
................................................................................................................
........................................................
................................................................................................................
1313
13
1313
55
5
55
77
7
77
The following symbols will be found in the text to guide you throughout the
Instructions:
Safety Instructions
Step by step instructions for an operation
)
Hints and Tips
Environmental information
U
MANUFACTURER:MANUFACTURER:
MANUFACTURER:
MANUFACTURER:MANUFACTURER:
ELECTROLUX ITALIA S.p.A.
C.so Lino Zanussi, 30
33080 PORCIA (PN)- Italy
Page 5
electrolux 5
Important Safety Information
You MUST read these warnings carefully before installing or using
the hob. If you need assistance, contact our Customer Care
Department on 08705 950950.
Installation
z This appliance must be installed and serviced by a competent person as
stated in the Gas Safety (Installation and Use) Regulations Current Editions
and the IEE Wiring Regulations.
z For appliances installed in the Republic of Ireland please refer to NSAI-
Domestic Gas Installations I.S.813 Current Editions and the ETCI Rules for
Electrical Installations.
z Remove all packaging before using the hob.
z Ensure that the gas and electrical supply complies with the type stated on
the rating plate, located near the gas supply pipe.
z Do not attempt to modify the hob in any way.
People Safety
z This hob is designed to be operated by adults. Do not allow children to play
near or with the hob.
z This appliance is not intended for use by children or other persons whose
physical, sensory or mental capabilities or lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction
by a responsible person to ensure that they can use the appliance safely.
z The hob gets hot when it is in use. Children should be kept away until it has
cooled.
z Children can also injure themselves by pulling pans or pots off the hob.
During Use
z This hob is intended for domestic cooking only. It is not designed for
commercial or industrial purposes.
z This appliance is not connected to a combustion products evacuation device.
It must be installed and connected in accordance with current installation
regulations. Particular attention shall be given to the relevant requirements
regarding ventilation.
z When in use a gas cooking hob will produce heat and moisture in the room
in which it has been installed. Ensure there is a continuous air supply, keeping
air vents in good condition or installing a cooker hood with a venting hose.
z Ensure a good ventilation around the appliance. A poor air supply could cause
lack of oxygen.
Page 6
6 electrolux
z When using the hob for a long period time, the ventilation should be
improved, by opening a window or increasing the extractor speed.
z Do not use this hob if it is in contact with water. Do not operate the hob with
wet hands.
z Ensure the control knobs are in the ‘OFF’ position when not in use.
z When using other electrical appliances, ensure the cable does not come
into contact with the hot surfaces of the cooking appliance.
z Unstable or misshapen pans should not be used on the hob as unstable
pans can cause an accident by tipping or spillage.
z Never leave the hob unattended when cooking with oil and fats.
z Never use plastic or aluminium foil dishes on the hob.
z Perishable food, plastic items and areosols may be affected by heat and
should not be stored above or below the hob unit.
z This appliance cannot be cleaned with steam or with a steam cleaning
machine.
Service
z This hob should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
U
Environmental Information
z After installation, please dispose of the packaging with due regard to safety
and the environment.
z When disposing of an old appliance, make it unusable, by cutting off the
cable.
z The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling
of this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service
or the shop where you purchased the product.
These instructions are only valid for countries whose identification symbols are
shown on the cover of this instruction booklet and on the appliance itself.
Keep this instruction book for future reference and ensure it is passed
on to any new owner.
Page 7
Description of the Hob
3
electrolux 7
2
3
4
1.1.
1 . Auxiliary Burner
1.1.
2.2.
2 . Rapid Burner
2.2.
3.3.
3 . Semi-rapid Burners
3.3.
4.4.
4 . Control knobs
4.4.
5.5.
5 . Electric Ignition Push Button
5.5.
1
Instructions for the User
INSTALLATION
Any gas installation must be carried out by a registered
competent person, and in accordance with existing rules and
regulations.
The relevant instructions are to be found in the second section of this
manual.
Please, ensure that, once the hob is installed, it is easily accessible for
the engineer in the event of a breakdown.
5
WHEN THE HOB IS FIRST INSTALLED
Once the hob has been installed, it is important to remove any protective
materials, which were put on in the factory.
The manufacturer will not accept liability, should the above instructions or
any of the other safety instructions incorporated in this book be ignored.
Page 8
8 electrolux
Operation
Hob burners control knobs
The symbols on the knobs mean that :
there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a pan on the pan
support.
To light a burner:
)
z Push the electric ignition push button which
is marked by a little spark (
z At the same time turn the relevant control
knob anticlockwise to maximum position
(
), then push it down to ignite the burner.
z Then adjust the flame as required.
).
If the burner does not ignite, turn the
control knob to zero, and try again.
When switching on the mains, after
installation or a power cut, it is quite
normal for the spark generator to be
activated automatically.
In the absence of electricity, ignition can
occur without the electrical device; in this
AA
A - Burner cap
AA
BB
B - Burner crown
BB
CC
C - Ignition electrode
CC
DD
D - Thermocouple
DD
case, approach the burner with a flame,
push the relevant knob down and turn it anti-clockwise until it reaches
the “maximum” position.
Do not keep the control knob pressed for more than 15
seconds. If the burner does not light even after 15 seconds,
release the control knob, turn it the "off" position ( ) and
wait for at least one minute before trying to light the burner
again.
Page 9
electrolux 9
If the control knobs become difficult to turn, please contact your
local Service Force Centre.
Using the hob correctly
To ensure maximum burner efficiency, it is strongly recommended that
you use only pots and pans with a
used, so that flame will not spread beyond the bottom of the vessel (see the
table below).
Burner minimum maximum
Large (rapid) 180 mm 260 mm
Medium (semi-rapid) 120 mm 220 mm
Small (auxiliary) 80 mm 160 mm
As soon as a liquid starts boiling, turn down the flame so that it will
barely keep the liquid simmering.
Use only pans or pots with flat bottom.
If you use a saucepan which is smaller than the
recommended size, the flame will spread beyond the bottom
of the vessel, causing the handle to overheat.
Carefully supervise cooking with fat or oil, since these types of
foodstuff can result in a fire, if over-heated.
The stainless steel can become tarnished if excessively
heated. Therefore prolonged cooking with potstones,
earthenware pans or cast-iron plates is inadvisable. Also, do
not use aluminium foil to protect the top during use.
Make sure pots do not protrude over the edges of the
cooktop and that they are centrally positioned on the rings
in order to obtain lower gas consumption.
flat bottom fitting the size of the burner
diameter diameter
Do not place unstable or deformed pots on the rings: they
could tip over or spill their contents, causing accidents.
Pots must not enter the control zone.
Page 10
10 electrolux
Maintenance and Cleaning
Before any maintenance or cleaning can be carried out, you
must DISCONNECT the hob from the electricity supply.
The hob is best cleaned whilst it is still warm, as spillage can
be removed more easily than if it is left to cool.
This appliance cannot be cleaned with steam or with a steam
cleaning machine.
The Hob Top
Regularly wipe over the hob top using a soft cloth well wrung out in warm water
to which a little wasing up liquid has been added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, the following products are
recommended:
- For stainless steel hobs use a proprietary stainless steel cleaner.
- For other hobs use Hob Brite or Bar Keepers Friend.
Do not leave acid or alkaline substances (e.g. vinegar, salt,
lemon juice, etc.) on the cooktop.
Pan Supports
The pan supports are not dishwasher proof; they must be washed by
hand.
Washing them by hand, take care when drying them as the enamelling
process occasionally leaves rough edges. If necessay, remove stubborn
stains using a paste cleaner. After cleaning, make sure that the pan
supports are correctly positioned.
Pay attention when replacing the pan supports in order to
avoid damaging the hob top.
Page 11
electrolux 11
The Burners
The burner caps and crowns can be removed for cleaning.
Wash the burners caps and crowns using hot soapy water, and remove
marks with a mild paste cleaner. A well moistened soap impregnated
steel wool pad can be used with caution, if the marks are particularly
difficult to remove.
After cleaning, be sure to wipe dry with a soft cloth.
The Ignition electrode
The electric ignition is obtained through a ceramic electrode which
contains a metal electrode (Page 8 - Fig. - C). Keep these components
very clean, to avoid difficult lighting, and check that the burner crown holes
(Page 8 - Fig. - B) are not obstructed.
Page 12
12 electrolux
Something Not Working?
If the hob is not working correctly, please carry out the following checks
before contacting your local Service Force Centre.
SYMPTOM SYMPTOM
SYMPTOM
SYMPTOM SYMPTOM
SOLUTIONSOLUTION
SOLUTION
SOLUTIONSOLUTION
There is no spark when
lighting the gas.
Check that the unit is plugged
in and the electrical supply is
switched on.
Check that the RCCB has not
tripped (if fitted).
Check the mains fuse has not
blown.
Check the burner cap and
crown have been replaced
correctly, e.g. after cleaning.
The gas ring burns unevenly.
Check the main jet is not
blocked and the burner crown
is clear of food particles.
Check the burner cap and
crown have been replaced
correctly, e.g. after cleaning.
If after all these checks, your hob still does not operate correctly, contact
your local Service Force Centre.
Please note that it will be necessary to provide proof of purchase for any
in-guarantee service calls.
In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a mechanical or
electrical breakdown.
Page 13
Instructions for the Installer
Engineer technical dataEngineer technical data
Engineer technical data
Engineer technical dataEngineer technical data
OVERALL DIMENSIONSOVERALL DIMENSIONS
OVERALL DIMENSIONS Width: 580 mm
OVERALL DIMENSIONSOVERALL DIMENSIONS
Depth: 500 mm
CUT OUT DIMENSIONSCUT OUT DIMENSIONS
CUT OUT DIMENSIONS Width: 550 mm
CUT OUT DIMENSIONSCUT OUT DIMENSIONS
Depth: 470 mm
electrolux 13
SUPPLSUPPL
SUPPL
SUPPLSUPPL
Gas:Gas:
Gas:
Gas:Gas:
R 1/2 inch (1/2 inch male) Rear right hand corner
Electric:Electric:
Electric:
Electric:Electric:
230 V~ 50 Hz supply, 3 core flexible cable
HEAHEA
HEA
HEAHEA
Rear Right and Left BurnerRear Right and Left Burner
Rear Right and Left Burner 2.0 kW (6826 BTU/HR)
Rear Right and Left BurnerRear Right and Left Burner
(semi-rapid)(semi-rapid)
(semi-rapid)
(semi-rapid)(semi-rapid)
Front Left BurnerFront Left Burner
Fr o nt Left B urner 3.0 kW Natural Gas (10239 BTU/HR)
Front Left BurnerFront Left Burner
(rapid)(rapid)
(rapid) 2.8 kW L.P.G. (9556 BTU/HR)
(rapid)(rapid)
Front Right BurnerFront Right Burner
Front Right Burner 1.0 kW (3413 BTU/HR)
Front Right BurnerFront Right Burner
(auxiliary)(auxiliary)
(auxiliary)
(auxiliary)(auxiliary)
APPLIANCE CLASSAPPLIANCE CLASS
APPLIANCE CLASS 3
APPLIANCE CLASSAPPLIANCE CLASS
APPLIANCE CAAPPLIANCE CA
APPLIANCE CA
APPLIANCE CAAPPLIANCE CA
GAS SUPPLGAS SUPPL
GAS SUPPL
GAS SUPPLGAS SUPPL
Y CONNECTIONSY CONNECTIONS
Y CONNECTIONS
Y CONNECTIONSY CONNECTIONS
T INPUTT INPUT
T INPUT
T INPUTT INPUT
TEGORTEGOR
TEGOR
TEGORTEGOR
YY
Y Natural gas G20 (2H) 20 mbar
YY
YY
Y GB - IE: II2H3+
YY
This appliance is manufactured according to the following EEC
directives:
2006/95 EEC - 2004/108 EEC - 90/396 EEC, current edition.
Page 14
14 electrolux
Characteristics of gas burnersCharacteristics of gas burners
Characteristics of gas burners
Characteristics of gas burnersCharacteristics of gas burners
BURNER RAPID SEMI-RAPID AUXILIARY
TYPE OF
GAS
NATURAL
GAS
20 mbar
LPG GAS
28-30/37
mbar
Characteristics
3
3
Ws - 50.7 MJ/ m
VALUE = 37.78 MJ/m
VALUE = 49.92 MJ/Kg
POSITION MA X MIN M AX MIN MA X MIN
NOMINAL THERMAL 3. 0 0.75 2.0 0.45 1.0 0.33
POWER (kW)
NOMINAL FLOW 0.286 0.062 0.190 0.043 0.095 0.031
RATE (m3/h)
NOZZLE REFERENCE 11 9 Adjust. 96 Adjust. 70 Adjust.
(1/100 mm)
NOMINAL THERMAL 2. 8 0.75 2.0 0.45 1.0 0.33
POWER (kW)
NOMINAL FLOW 202 47 144 32 72 24
RATE (g/h)
NOZZLE REFERENCE 86 42 7 1 3 2 50 2 8
(1/100 mm)
Burner Dia. Tap By-pass
1/100 mm
Auxiliary 28
Semi-rapid 32
Rapid 42
(large) (medium) (small)
Aeration adjustment none
Page 15
electrolux 15
Important safety requirements
This hob must be installed in accordance with the Gas Safety (Installation
and Use) Regulations (Current Edition) and the IEE Wiring Regulations
(Current Edition).
For appliances installed in the Republic of Ireland please refer to NSAIDomestic Gas Installation I.S. 813 Current Editions and the ETCI Rules for
Electrical Installations.
PrPr
ovision for Vovision for V
Pr
ovision for V
PrPr
ovision for Vovision for V
Detailed recommendations are contained in the following British Standards
Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current
Editions.
The hob should not be installed in a bed sitting room with a volume of less
than 20 m
3
. If it is installed in a room of volume less than 5 m3 an air vent of
effective area of 100 cm
between 5 m
while if the volume exceeds 11 m
However, if the room has a door which opens directly to the outside no air
vent is required even if the volume is between 5 m
If there are other fuel burning appliances in the same room, B.S. 5440
Part 2 Current Edition, should be consulted to determine the requisite air
vent requirements.
For appliances installed in the Republic of Ireland please refer to the NSAIDomestic Gas Installation I.S. 813 Current Editions Table Four.
entilationentilation
entilation
entilationentilation
2
3
and 10 m3 an air vent of effective area of 50 cm2 is required,
is required. If it is installed in a room of volume
3
no air vent is required.
3
and 11 m3.
Page 16
16 electrolux
Installation
IMPORTANT
Any gas installation must be carried out by a GAS SAFEAny gas installation must be carried out by a GAS SAFE
Any gas installation must be carried out by a GAS SAFE
Any gas installation must be carried out by a GAS SAFEAny gas installation must be carried out by a GAS SAFE
REGISTER installerREGISTER installer
REGISTER installer
REGISTER installerREGISTER installer
Please, ensure that, once the hob is installed, it is easily accessible for the
engineer in the event of a breakdown.
The manufacturer will not accept liability, should the above instructions or
any of the other safety instructions incorporated in this instruction booklet
be ignored.
On the end of the shaft, which includes the G 1/2" threaded elbow,
adjustment is fixed so that the washer is fitted between the components
as shown in the diagram. Screw the parts together without using excessive
force.
..
.
..
A)A)
A ) End of shaft with nut
A)A)
B)B)
B ) Washer
B)B)
C)C)
C ) Elbow
C)C)
Page 17
electrolux 17
Gas Connection
Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel
or copper.
The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).
When the final connection has been made, it is essential that a thorough leak test is
carried out on the hob and installation.
Ensure that the main connection pipe does not exert any strain on the hob.
It is important to install the elbow correctly, with the shoulder on the
end of the thread, fitted to the hob connecting pipe.
Failure to ensure the correct assembly will cause leakage of gas.
Location
The hob may be located in a kitchen, a
kitchen/diner or bed sitting room, but
not in a bathroom, shower room or
garage.
Ensure that there is a minimum distance
of 55 mm between the rear cut out edge
and the wall.
600
M
IN
.
A minimum distance of 100 mm must
be left between the side edges of the
cut out and any adjacent cabinets or
walls.
The minimum distance combustible
material can be fitted above the hob in
line with the edges of the hob is 400
mm. If it is fitted below 400 mm a space
of 50 mm must be allowed from the
edges of the hob.
The minimum distance combustible
material or a cooker hood can be fitted
above the hob is 650 mm.
For appliances installed in the Republic
of Ireland please refer to NSAIDomestic Gas Installation I.S 813
Current Edition Section 7- Permitted
Locations of Appliance.
Page 18
18 electrolux
Fitting the Hob into the Worktop
Carry out the building in of the hob
as follows:
1) put the seals supplied with the
hob, on the edges of the cut
out, taking care that the seals
meet without overlapping;
2) place the hob in the cut out,
taking care that it is centred;
3) fix the hob with the relevant
fixing clamps and screws, as
shown in the diagram. When
the screws have been
tightened, the excess seal can
be removed.
The edge of the hob forms a double
seal which prevents the ingress of liquids.
SealSeal
Seal
SealSeal
Page 19
electrolux 19
Building In
BB
uilding over a cupboard or draweruilding over a cupboard or drawer
B
uilding over a cupboard or drawer
BB
uilding over a cupboard or draweruilding over a cupboard or drawer
If the hob is to be installed above a cupboard or drawer it will be necessary to fit a
heat resistant board below the base of the hob on the underside of the work surface.
It is also recommended to carry out the electrical connection to the hob as shown
in diagrams 1 and 2.
BB
uilding over a kitchen unit withuilding over a kitchen unit with
B
uilding over a kitchen unit with
BB
uilding over a kitchen unit withuilding over a kitchen unit with
doordoor
door
doordoor
Proper arrangements must be taken in
designing the furniture unit, in order to avoid
any contact with the bottom of the hob which
can be heated when it is operated. The
recommended solution is shown in diagram 3.
The panel fitted under the hob ("a") should
be easily removable to allow easy access if
technical assistance is needed. The space
behind the kitchen unit ("b") can be used for
connections.
1
FLEX
OUTLET
ON/OFF SWITCH
Dimensions are given in mm.
ON/OFF SWITCH
2
FLEX
OUTLET
3
Page 20
20 electrolux
Electrical Connections
Any electrical work required to install this hob should be
carried out by a qualified electrician or competent person, in
accordance with the current regulations.
THIS HOB MUST BE EARTHED.
The manufacturer declines any liability should these safety
measures not be observed.
This hob is designed to be connected to a 230 V 50 Hz AC electrical
supply.
Before switching on, make sure the electricity supply voltage is the same
as that indicated on the hob rating plate. The rating plate is located on the
bottom of the hob. A copy is attached on the back cover of this book.
The hob is supplied with a 3 core flexible supply cable.
The wires in the mains lead are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
1. Connect the green and yellow (earth) wire to the terminal which is
marked with the letter 'E' or the earth symbol
and yellow. The earth wire should be about 2 cm longer than the neutral
and live wires.
2. Connect the blue (neutral) wire to the terminal which is marked with
the letter 'N' or coloured black.
3. Connect the brown (live) wire to the terminal which is marked with the
letter 'L' or coloured red.
Upon completion there must be no cut, or stray strands of wire present
and the cable clamp must be secure over the outer sheath.
or coloured green
A cut off plug inserted into a 13 amp socket is a serious safety
(shock) hazard. Ensure that the cut off plug is disposed of
safely.
The replacement of electric cable must be carried out exclusively by the service force centre or by personnel with similar
competencies, in accordance with the current regulations.
Page 21
electrolux 21
Permanent Connection
In the case of a permanent connection, it is necessary that you install a
double pole switch between the hob and the electricity supply (mains),
with a minimum gap of 3 mm between the switch contacts and of a type
suitable for the required load in compliance with the current electric
regulations.
The switch must not break the yellow and green earth cable at any point.
Ensure that the hob supply cord does not come into contact
with surfaces with temperatures higher than 90 deg. C.
Supply cable replacement
The cable used to connect the hob to the electrical supply must comply to
the specifications given below.
Min. size
Cable/flex Cable / flex type Fuse
0.75 mm
2
H05 V2V2-F (T90) 3 A
Wiring diagram
A. IGNITOR SWITCH
B. IGNITOR UNIT
Page 22
22 electrolux
Fault Finding
Preliminary Electrical Systems CheckPreliminary Electrical Systems Check
Preliminary Electrical Systems Check
Preliminary Electrical Systems CheckPreliminary Electrical Systems Check
STARTSTART
START
STARTSTART
Isolate appliance
and carry out:
A:A:
A: Earth Continuity
A:A:
check.
YESYES
NONO
NO
NONO
Has inlet fuse blown?
YES
YESYES
Carry out:
C:C:
C: Polarity check.
C:C:
Brown
Brown
Carry out:
D:D:
D: Resistance to
D:D:
Earth check.
Blue
Blue
Green
Yellow
Green
Yellow
NONO
NO
NONO
Inlet wiring
faulty.
Rectify any
fault.
YESYES
YES
YESYES
PLUG (with cover removed)PLUG (with cover removed)
PLUG (with cover removed)
PLUG (with cover removed)PLUG (with cover removed)
Earth Wire
Green/Yellow
Neutral Wire
Blue
Isolate appliance and
carry out:
B:B:
B: Insulation check.
B:B:
Rectify any fault
including replacing
fuses as necessary.
Electricity supply
should now be
satisfactory.
( )
FUSE
SOCKETSOCKET
SOCKET
SOCKETSOCKET
(face view)(face view)
(face view)
(face view)(face view)
( )
E
N
L
Page 23
electrolux 23
A. EARTH CONTINUITY CHECK
Appliance must be electrically disconnected - meter set on W (Ohms)
x 1 scale and adjust zero if necessary.
— Test leads from any appliance earth point to earth pin on plug.
Resistance should be less than 0.1 W (Ohm), check all earth wires
for continuity and all contacts clean and tight.
B. INSULATION CHECK
Appliance electrically disconnected, all switches ON.
a) meter set on W (Ohms) x 1 scale.
Test leads from L to N in appliance terminal block. If meter reads
«0» then there is a short circuit.
b) meter set on W (Ohm) x 100 scale.
Repeat test with leads from L to E. If meter reads less than ×
(infinity) there is a fault.
NOTE - Should it be found that the fuse has failed but no fault is indicated
- a detailed continuity check (i.e. by disconnecting and checking each
component) is required to trace the faulty component.
It is possible that a fault could occur as a result of local burning/arcing but
no fault could be found under test. However a detailed visual inspection
should reveal evidence of burning around the fault.
Page 24
24 electrolux
Ignition System / Gas IgnitionIgnition System / Gas Ignition
Ignition System / Gas Ignition
Ignition System / Gas IgnitionIgnition System / Gas Ignition
YESYES
YES
Ignitor does not spark
NONO
NO
NONO
YESYES
Check gas supply at
burner
Check plug top fuse and
replace if necessary
Check polarity and
earth continuity of
supply point
Check earth continuity
of appliance
Check continuity from 'N' on the
mains connector block and "O" on
the ignitor unit
Check continuity from 'L' on the
mains connector block and the
taps ignition switches
Light burner manually
Check by pass simmer
adjusted
Check position of the
electrode
Check continuity from the tip of
each electrode to the terminals
1 to 4 on the ignitor unit
Check for breaks in the
insulation of the HT leads
Check fitting
of burners
Check continuity from ignition
switches connector to ignitor unit
Change the ignitor unit
Page 25
electrolux 25
Commissioning
When the hob has been fully installed it will be necessary to check the
minimum flame setting. To do this, follow the procedure below.
)
1) Turn the gas tap to the MAX position and ignite.
2) Set the gas tap to the MIN flame position then turn the control
knob from MIN to MAX several times. If the flame is unstable or is
extinguished follow the procedure below.
Procedure:Procedure:
Procedure:
Procedure:Procedure:
1) Re-ignite the burner and set
)
PrPr
Pr
essur
PrPr
The pressure testing must be carried out on the burners.
to MIN.
2) Remove the control knob.
3) To adjust, use a thin bladed
screwdriver and turn the
adjustment screw (see
diagram) until the flame is
steady and does not
extinguish, when the knob is
turned from MIN to MAX.
Repeat this procedure for all burners.
essuressur
essuressur
e Te T
e T
e Te T
estingesting
esting
estingesting
Minimum adjustment screwMinimum adjustment screw
Minimum adjustment screw
Minimum adjustment screwMinimum adjustment screw
Proceed as follows:
)
1) Remove the pan supports and the burner caps and crowns.
2) Fit manometer tube over the injector.
3) Turn on the burner gas supply and ignite another burner supply.
The pressure reading should be nominally 20 mbar and must be
between 17 mbar and 25 mbar.
4) Turn off the burner supplies.
Page 26
26 electrolux
Conversion from Natural Gas to LPG
IMPORTANT
The replacement/conversion from natural gas to LPG should only be
undertaken by a competent person.
It is important to note that this model is designed for use with natural gas but can be
converted for use with butane or propane gas providing the correct injectors are
fitted. The gas rate is adjusted to suit.
Method
1) Ensure that the gas taps are in the 'OFF' position
)
2) Isolate the hob from the electricity supply
3) Remove all pan supports, burner caps, rings, crowns and control knobs.
4) With the aid of a 7mm box spanner the burner injectors can then be
unscrewed and replaced by the appropriate LPG injectors.
TO ADJUST THE GAS RATE
With the aid of a thin bladed screwdriver completely tighten down the by
pass adjustment screw. Upon completion stick the replacement rating plate
on the under side of the hob.
Page 27
electrolux 27
Standard Guarantee Conditions
We, Electrolux, undertake that if within 12 months of the date of the purchase this
Electrolux appliance or any part thereof is proved to be defective by reason only of
faulty workmanship or materials, we will, at our option repair or replace the same
FREE OF CHARGE for labour, materials or carriage on condition that:
•The appliance has been correctly installed and used only on the gas and electricity
supply stated on the rating plate.
•The appliance has been used for normal domestic purposes only, and in accordance
with the manufacturer’s instructions.
•The appliance has not been serviced, maintained, repaired, taken apart or tampered
with by any person not authorised by us.
•Electrolux Service Force Centre must undertake all service work under this
guarantee.
•Any appliance or defective part replaced shall become the Company’s property.
•This guarantee is in addition to your statutory and other legal rights.
Exclusions
•Damage or calls resulting from trans-portation, improper use or neglect, the
replacement of any light bulbs or removable parts of glass or plastic.
•Costs incurred for calls to put right an appliance which is improperly installed or
calls to appliances outside the United Kingdom.
•Appliances found to be in use within a commercial environment, plus those which
are subject to rental agreements.
•Products of Electrolux manufacturer that are not marketed by Electrolux.
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to purchase spare
parts, please contact your local Service Force Centre by telephoning
0870 5 929 929
Your telephone call will be automatically routed to the Service Force Centre covering your postcode area.
For the address of your local Service Force Centre and further information about
Service Force, please visit the website at
www.serviceforce.co.uk
Before calling out an engineer, please ensure you have read the details under the
heading “Something not working”. When you contact the Service Force Centre you
will need to give the follo-wing details:
1.Your name, address and postcode.
2.Your telephone number.
Page 28
28 electrolux
3. Clear concise details of the fault.
4. The model and Serial number of the appliance (found on the rating plate).
5.The purchase date.
Please note a valid purchase receipt or guarantee documentation is required for in
guarantee service calls.
Customer CareCustomer Care
Customer Care
Customer CareCustomer Care
For general enquiries concerning your Electrolux appliance, or for further
information on Electrolux products please contact our Customer Care
Department by letter or telephone at the address below or visit our website
wwwwww
at
www
wwwwww
.electr.electr
.electr
.electr.electr
olux.co.ukolux.co.uk
olux.co.uk
olux.co.ukolux.co.uk
Customer Care Department
Electrolux Major Appliances
Addington Way
Luton
Bedfordshire, LU4 9QQ
Tel: 08705 950 950 (*)
(*) Calls may be recorded for training purposes
Page 29
electrolux 29
European Guarantee
This appliance is guaranteed by Electrolux in each of the countries listed
at the back of this user manual, for the period specified in the appliance
guarantee or otherwise by law. If you move from one of these countries to
another of the countries listed below the appliance guarantee will move
with you subject to the following qualifications:
• The appliance guarantee starts from the date you first purchased the
appliance which will be evidenced by production of a valid purchase
document issued by the seller of the appliance.
• The appliance guarantee is for the same period and to the same extent
for labour and parts as exists in your new country of residence for this
particular model or range of appliances.
• The appliance guarantee is personal to the original purchaser of the
appliance and cannot be transferred to another user.
• The appliance is installed and used in accordance with instructions
issued by Electrolux and is only used within the home, i.e. is not used
for commercial purposes.
• The appliance is installed in accordance with all relevant regulations in
force within your new country of residence.
The provisions of this European Guarantee do not affect any of the rights
granted to you by law.
Page 30
30 electrolux
Page 31
electrolux 31
Page 32
www.electrolux.co.uk
39712-5301 03/09 R.B
Loading...