User manual
EFC 70700 - EFC 90700
Welcome to the world of ElectroluxWelcome to the world of Electrolux
Welcome to the world of Electrolux
Welcome to the world of ElectroluxWelcome to the world of Electrolux
Thank you for choosing a first class
product from Electrolux, which
hopefully will provide you with lots of
pleasure in the future. The Electrolux
ambition is to offer a wide variety of
quality products that make your life
more comfortable. You find some
examples on the cover in this manual.
Please take a few minutes to study this
manual so that you can take advantage
of the benefits of your new machine.
We promise that it will provide a
superior User Experience delivering
Ease-of-Mind. Good luck!
electrolux 3electrolux 3
electrolux 3
electrolux 3electrolux 3
GB
44
electroluxelectrolux
4
electrolux contents
44
electroluxelectrolux
Contents
GB
Safety warnings .................................5
Description of the Appliance ..............7
Control Panel..................................... 9
Maintenance and Care ................... 10
Special accessories......................... 14
Something Not Working ................... 14
Installation ....................................... 15
The following symbols are used in this user manual:
Important information concerning your personal safety and information on
how to avoid damaging the appliance.
General information and tips.
Environmental information.
Safety warnings
For the userFor the user
For the user
For the userFor the user
• The cooker hood is designed to
extract unpleasant odours from the
kitchen, it will not extract steam.
• Always cover lighted elements, to
prevent excess heat from damaging
the appliance. In the case of oil, gas
and coal fired cookers it is essential
to avoid open flames.
• Also, when frying, keep the deep
frying pan on the cooker top/cooker
under careful control.
• The hot oil in the frying pan might
ignite due to overheating.
• The risk of self-ignition increases
when the oil being used is dirty.
• It is extremely important to note that
overheating can cause a fire.
Never carry out any flambé cookingNever carry out any flambé cooking
•
Never carry out any flambé cooking
Never carry out any flambé cookingNever carry out any flambé cooking
under the hood.under the hood.
under the hood.
under the hood.under the hood.
Always disconnect the unit frAlways disconnect the unit fr
•
Always disconnect the unit fr
Always disconnect the unit frAlways disconnect the unit fr
power supply beforpower supply befor
power supply befor
power supply beforpower supply befor
any work on the hood, includingany work on the hood, including
any work on the hood, including
any work on the hood, includingany work on the hood, including
rr
eplacing the light bulbeplacing the light bulb
r
eplacing the light bulb (take the
rr
eplacing the light bulbeplacing the light bulb
e carrying oute carrying out
e carrying out
e carrying oute carrying out
cartridge fuse out of the fuse holder
or switch off the automatic circuit
breaker).
It is very important to clean the hoodIt is very important to clean the hood
•
It is very important to clean the hood
It is very important to clean the hoodIt is very important to clean the hood
and rand r
eplace the filter at theeplace the filter at the
and r
eplace the filter at the
and rand r
eplace the filter at theeplace the filter at the
rr
ecommended intervals. Failurecommended intervals. Failur
r
ecommended intervals. Failur
rr
ecommended intervals. Failurecommended intervals. Failur
do so could cause grdo so could cause gr
do so could cause gr
do so could cause grdo so could cause gr
to build up, rto build up, r
to build up, r
to build up, rto build up, r
esulting in a firesulting in a fir
esulting in a fir
esulting in a firesulting in a fir
ease depositsease deposits
ease deposits
ease depositsease deposits
• The appliance is not intended for use
by young children or infirm persons
without supervision.
• Older children must be supervised if
using the appliance.
om theom the
om the
om theom the
etoeto
eto
etoeto
e hazare hazar
e hazar
e hazare hazar
electroluxelectrolux
electrolux safety warnings
electroluxelectrolux
• Young children should be supervised
to ensure that they do not play with
the appliance.
••
WW
ARNING -ARNING -
•
W
ARNING - Ensure that the
••
WW
ARNING -ARNING appliance is switched off before
replacing the lamp to avoid the
possibility of electric shock.
This appliance is marked according to
the European directive 2002/96/EC on
Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of this
product.
The symbol on the product, or on
the documents accompanying the
product, indicates that this appliance
may not be treated as household
waste. Instead it should be taken to
the appropriate collection point for the
recycling of electrical and electronic
equipment.
Disposal must be carried out in
d.d.
d.
d.d.
accordance with local environmental
regulations for waste disposal.
For more detailed information about
treatment, recovery and recycling of
this product, please contact your local
council, your household waste disposal
service or the shop where you
purchased the product.
55
5
55
GB
66
electroluxelectrolux
6
electrolux safety warnings
66
electroluxelectrolux
For the installerFor the installer
For the installer
For the installerFor the installer
• When used as an extractor unit, the
GB
hood must be fitted with a hose
having preferably the same diameter
as the outlet hole.
Attention:Attention:
Attention: The hose is not supplied
Attention:Attention:
and must be purchased separately.
••
When installing the hood, make surWhen installing the hood, make sur
•
When installing the hood, make sur
••
When installing the hood, make surWhen installing the hood, make sur
you observe the following minimumyou observe the following minimum
you observe the following minimum
you observe the following minimumyou observe the following minimum
distance frdistance fr
distance fr
distance frdistance fr
cooking hob/ring surfaces:cooking hob/ring surfaces:
cooking hob/ring surfaces:
cooking hob/ring surfaces:cooking hob/ring surfaces:
electric cookerselectric cookers
electric cookers
electric cookerselectric cookers
gas cookersgas cookers
gas cookers
gas cookersgas cookers
om the top edge of theom the top edge of the
om the top edge of the
om the top edge of theom the top edge of the
If the instructions for installation for
the gas hob specify a greater
distance, this must be adhered to.
• The national Standard on fuelburning systems specifies a maximum depression of 0.04 mbar in
such rooms.
• The air outlet must not be connected
to chimney flues or combustion gas
ducts. The air outlet must under no
circumstances be connected to
ventilation ducts for rooms in which
fuel-burning appliances are installed.
• The air outlet installation must comply
with the regulations laid down by the
relevant local authorities.
• When the unit is used in extraction
mode, a sufficiently large ventilation
hole must be provided, with
dimensions that are approximately
the same as the outlet hole.
• National and regional building
regulations impose a number of
restrictions on using hoods and fuelburning appliances connected to a
chimney, such as coal or oil roomheaters and gas fires, in the same
room.
600 mm600 mm
600 mm
600 mm600 mm
700 mm700 mm
700 mm
700 mm700 mm
• Hoods can only be used safely with
appliances connected to a chimney if
the room and/or flat (air/environment
combination) is ventilated from
outside using a suitable ventilation
hole approximately 500-600 cm
large to avoid the possibility of a
depression being created during
operation of the hood.
• If you have any doubts, contact the
relevant controlling authority or
ee
e
ee
building inspector’s office.
• Since the rule for rooms with fuel
burning appliances is “outlet hole of
the same size as the ventilation hole”,
a hole of 500-600 cm2, which is to
say a larger hole, could reduce the
performance of the extractor hood.
• If the hood is used in its recirculation
mode, it will operate simply and safely
in the above conditions without the
need for any of the aforementioned
measures.
• When the hood is used in its
extraction mode, the following rules
must be followed to obtain optimal
operation:
- short and straight outlet hose
- keep bends in outlet hose to a
minimum
- never install the hoses with an
acute angle, they must always
follow a gentle curve.
- keep the hose as large as possible
(preferably the same diameter as
the outlet hole).
- the length should be no more than:
3 metres with one 90° bend
2 metres with two 90° bends
Bends of more than 90° will reduce
the efficiency of the hood and
reduce the airflow.
• Failure to observe these basic
instructions will drastically reduce the
performance and increase the noise
levels of the extractor hood.
2
Description of the Appliance
••
The cooker hood is designed toThe cooker hood is designed to
•
The cooker hood is designed to
••
The cooker hood is designed toThe cooker hood is designed to
extract unpleasant odours fromextract unpleasant odours from
extract unpleasant odours from
extract unpleasant odours fromextract unpleasant odours from
the kitchen, it will not extractthe kitchen, it will not extract
the kitchen, it will not extract
the kitchen, it will not extractthe kitchen, it will not extract
steam.steam.
steam.
steam.steam.
Extractor versionExtractor version
Extractor version
Extractor versionExtractor version
• In this version fumes are extracted
the outsidethe outside
the outside via a
the outsidethe outside
to the
coupling ringcoupling ring
coupling ring.
coupling ringcoupling ring
hosehose
hose connected
hosehose
Attention: The hose is not supplied
and must be purchased separately.
• In order to obtain the best performance the
hosehose
hose should have a
hosehose
diameter equal to the outlet hole.
Should there already be a pipe of
diameter 125 or 120 mm that ducts
to the outside through the walls or
roof, it is possible to use the 150/
125-120 mm reduction flange
provided. In this case the hood will
be slightly noisier.
toto
to
toto
Fig. 1 - Extractor version
electroluxelectrolux
electrolux description of the appliance
electroluxelectrolux
To the outside
Coupling
ring
Hose
Coupling
ring
77
7
77
GB
88
electroluxelectrolux
8
electrolux description of the appliance
88
electroluxelectrolux
RecirRecir
Recir
RecirRecir
culation Vculation V
culation V
culation Vculation V
ersionersion
ersion
ersionersion
• The air is filtered through a
GB
filterfilter
filter and returned to the kitchen
filterfilter
through the
side gridsside grids
side grids.
side gridsside grids
• You will need an original Electrolux
charcoal filter for this function
(Available from your local Electrolux
Service Force Centre).
• Fix the
deflectordeflector
deflector using 2 screws Ø
deflectordeflector
3,5x6.5 mm.
• Fix the
connection flangeconnection flange
connection flange using 2
connection flangeconnection flange
screws Ø 3,5x6.5 mm.
charcoalcharcoal
charcoal
charcoalcharcoal
Chimney
support
Deflector
Connection
flange
Side grids
Charcoal
filter
Screw
Screw
Grease
filters
Fig. 2 - Recirculating version
electroluxelectrolux
electrolux control panel
electroluxelectrolux
Control Panel
• Best results are obtained by using a low speed for normal conditions and a high
speed when odours are more concentrated.
Turn the hood on a few minutes before you start cooking.
The hood should be left on after cooking for about 15 minutes or until all the
odours have disappeared.
CorrCorr
ect ventilation:ect ventilation:
•
Corr
ect ventilation: If the cooker hood is to work correctly there must be an
CorrCorr
ect ventilation:ect ventilation:
under pressure in the kitchen. It is important to keep the kitchen windows
closed and have a window in an adjacent room open.
ON/OFF Extractor
fan switch -
Push button 1
Push button
Light switch
Push button
2
3
99
9
99
GB
Fig. 3 - Control Panel
light switchlight switch
• the
light switch switches the hood
light switchlight switch
lamp ON and OFF;
ON/OFF Extractor fan switch -ON/OFF Extractor fan switch -
•
ON/OFF Extractor fan switch -
ON/OFF Extractor fan switch -ON/OFF Extractor fan switch Push button 1:Push button 1:
Push button 1: used to turn the fan
Push button 1:Push button 1:
off and to set the fan to speed 1.
Push button 2:Push button 2:
•
Push button 2: used to set the fan
Push button 2:Push button 2:
to speed 2.
Push button 3:Push button 3:
•
Push button 3: used to set the fan
Push button 3:Push button 3:
to speed 3.
1010
electroluxelectrolux
10
electrolux maintenance and care
1010
electroluxelectrolux
Maintenance and CareMaintenance and Care
Maintenance and Care
Maintenance and CareMaintenance and Care
GB
••
Before performing any maintenance operation, isolate the hood fromBefore performing any maintenance operation, isolate the hood from
•
Before performing any maintenance operation, isolate the hood from
••
Before performing any maintenance operation, isolate the hood fromBefore performing any maintenance operation, isolate the hood from
the electrical supply by switching off at the connector and removingthe electrical supply by switching off at the connector and removing
the electrical supply by switching off at the connector and removing
the electrical supply by switching off at the connector and removingthe electrical supply by switching off at the connector and removing
the connector fuse.the connector fuse.
the connector fuse.
the connector fuse.the connector fuse.
Or if the appliance has been connected through a plug and socket,Or if the appliance has been connected through a plug and socket,
Or if the appliance has been connected through a plug and socket,
Or if the appliance has been connected through a plug and socket,Or if the appliance has been connected through a plug and socket,
then the plug must be removed from the socket.then the plug must be removed from the socket.
then the plug must be removed from the socket.
then the plug must be removed from the socket.then the plug must be removed from the socket.
Metal grease filterMetal grease filter
Metal grease filter
Metal grease filterMetal grease filter
• The purpose of the grease filters is to
absorb grease particles which form
during cooking and it
mustmust
must always
mustmust
be used, either in the external
extraction or internal re-circulation
function.
Removing the metal grease filterRemoving the metal grease filter
Removing the metal grease filter
Removing the metal grease filterRemoving the metal grease filter
• First, push both
handleshandles
handles towards the centre, then
handleshandles
metal grease filtermetal grease filter
metal grease filter
metal grease filtermetal grease filter
extract the filter, pulling downwards.
Repeat the steps with the second
filter.
Metal grease
filter handle
Fig. 4 - Removing the metal grease filter
Attention:Attention:
Attention: the metal grease filters
Attention:Attention:
must be removed and washed, either
by hand or in the dishwasher, every 4
weeks.
Hand washingHand washing
Hand washing
Hand washingHand washing
Soak grease filters for about one hour
in hot water with a grease-loosening
cleaner, then rinse off thoroughly with
hot water. Repeat the process if
necessary. Refit the grease filters
when they are dry.
DishwasherDishwasher
Dishwasher
DishwasherDishwasher
Place grease filters in the dishwasher.
Select most powerful washing
programme and highest temperature,
at least 65°C. Repeat the process.
Refit the grease filters when they are
dry .
When washing the metal grease filter
in the dishwasher a slight
discolouration of the filter can occur,
this does not have any impact on its
performance.
• Clean the inner housing using a hand
hot solution only(never use caustic
detergents, abrasive powders or
brushes).
Charcoal filterCharcoal filter
Charcoal filter
Charcoal filterCharcoal filter
• The charcoal filter should only be
used if you want to use the hood in
the recirculation function.
• Only applicable for recirculation. The
charcoal filters absorb smells and
odours.
• The charcoal filter cannot be washed
not regenerated.
The charcoal filter should be
replaced every 4 months under
normal use.
Replacement filters are available
from your local Service Force Centre.
Fitting:Fitting:
Fitting:
Fitting:Fitting:
• Unplug the unit or disconnect it from
the power supply
• Remove the
• Fit the
charcoal filtercharcoal filter
charcoal filter and fix it to
charcoal filtercharcoal filter
metal grmetal gr
metal gr
metal grmetal gr
ease filterease filter
ease filter.
ease filterease filter
the body of the hood with two
supplied
screwsscrews
screws.
screwsscrews
• Refit the metal grease filters.
TT
oror
emoveemove
•
T
or
emove proceed in the reverse
TT
oror
emoveemove
order.
• Always specify the hood model code
number and serial number when
ordering replacement filters. This
information is shown on the
registration plate located on the
inside of the unit.
• The charcoal filter can be ordered
from your local ELECTROLUX Service
Force Centre.
electroluxelectrolux
electrolux maintenance and care
electroluxelectrolux
Charcoal
filter
Screw
Grease
filters
Fig. 5 - Fitting the Charcoal Filter
Screw
• Always specify the hood model code
number and serial number when
ordering replacement filters. This
information is shown on the rating
plate located on the inside of the unit.
• The charcoal filter can be ordered
from your local Service Force Centre.
WarningWarning
Warning
WarningWarning
• Failure to observe the instructions on
cleaning the unit and changing the
filters will cause a fire hazard. You
are therefore strongly recommended
to follow these instructions.
• The manufacturer declines all
responsibility for any damage to the
motor or any fire damage linked to
inappropriate maintenance or failure
to observe the above safety
recommendations.
1111
11
1111
GB
1212
electroluxelectrolux
12
electrolux maintenance and care
1212
electroluxelectrolux
Changing the light bulb(s)Changing the light bulb(s)
Changing the light bulb(s)
Changing the light bulb(s)Changing the light bulb(s)
GB
Disconnect the cooker hoodDisconnect the cooker hood
•
Disconnect the cooker hood
Disconnect the cooker hoodDisconnect the cooker hood
frfr
om the mains supplyom the mains supply
fr
om the mains supply
frfr
om the mains supplyom the mains supply
••
Prior to touching the light bulbsPrior to touching the light bulbs
•
Prior to touching the light bulbs
••
Prior to touching the light bulbsPrior to touching the light bulbs
ensure they are cooled down.ensure they are cooled down.
ensure they are cooled down.
ensure they are cooled down.ensure they are cooled down.
• Remove the lamp cover, use a screw
driver as a lever.
• Replace the old bulb with a new one
of the same type.
• Refit the lamp cover.
• If the light does not come on, make
sure the bulb has been inserted in
correctly before contacting your local
Service Force Centre.
..
.
..
Fig. 6 - Changing the light bulb
Cleaning the hoodCleaning the hood
Cleaning the hood
Cleaning the hoodCleaning the hood
• Clean the outside of the hood using a
damp cloth and a solution of water
and mild washing up liquid.
• Never use corrosive, abrasive or
flammable cleaning products or
products containing bleach.
• Never insert pointed objects in the
motor’s protective grid.
• Only ever clean the switch panel and
filter grill using a damp cloth and mild
washing up liquid.
• Clean all the plastic parts with a soft
cloth soaked in warm water and
neutral soap.
• It is extremely important to clean the
unit and change the filters at the
recommended intervals. Failure to do
so will cause grease deposits to build
up that could constitute a fire hazard.
electroluxelectrolux
electrolux maintenance and care
electroluxelectrolux
1313
13
1313
GB
1414
electroluxelectrolux
14
electrolux special accessories
1414
electroluxelectrolux
Special accessoriesSpecial accessories
Special accessories
Special accessoriesSpecial accessories
GB
CharChar
coal filtercoal filter
Char
coal filter Type 160
CharChar
coal filtercoal filter
Something Not Working
If your appliance fails to work properly please carry out the following checks.
SymptomSymptom
Symptom
SymptomSymptom
The cooker hood will not start...
The cooker hood is not working
The cooker hood has switched off
during operation...
If after all these checks, the problem persists, contact your local Service Centre,
quoting the model and serial number.
Please note that it will be necessary to provide proof of purchase for any inguarantee service calls.
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
SolutionSolution
Solution
SolutionSolution
Check that:Check that:
Check that: The hood is connected
Check that:Check that:
to the electricity supply.
Check that a fan speed has been
selected.
Check that:Check that:
Check that: The fan speed is set
Check that:Check that:
high enough for the task.
The grease filters are clean.
The kitchen is adequately vented to
allow the entry of fresh air.
If set up for recirculation, check that
the charcoal filter is still effective.
If set up for extraction, check that the
ducting and outlets are not blocked.
The safety cut-out device has been
tripped. Turn off the hob and then
wait for the device to reset. If the
hood has been installed below the
heights indicated in the installation
instructions the motor will cut-out
frequently which will damage the
hood.
Installation
electroluxelectrolux
electrolux installation
electroluxelectrolux
1515
15
1515
TT
echnical Detailsechnical Details
T
echnical Details
TT
echnical Detailsechnical Details
Dimensions (in cm):Dimensions (in cm):
Dimensions (in cm):
Dimensions (in cm):Dimensions (in cm):
EFC 70700EFC 70700
EFC 70700
EFC 70700EFC 70700
EFC 90700EFC 90700
EFC 90700
EFC 90700EFC 90700
Height: 75-116 75-116
Width: 69,8 89,8
Depth: 50,5 50,5
MaximumMaximum
Maximum
MaximumMaximum
absorbedabsorbed
absorbed
absorbedabsorbed
power:power:
power:
power:power:
210 W210 W
210 W
210 W210 W
210 W210 W
210 W
210 W210 W
Motor: 1x170 W 1X170 W
Lighting: 2x20 W 2x20 W
Length of the cable:Length of the cable:
Length of the cable:
Length of the cable:Length of the cable:
Electrical connection:Electrical connection:
Electrical connection:
Electrical connection:Electrical connection:
Mounting accessories includedMounting accessories included
Mounting accessories included
Mounting accessories includedMounting accessories included
150 cm150 cm
150 cm
150 cm150 cm
220-240 V220-240 V
220-240 V
220-240 V220-240 V
150 cm150 cm
150 cm
150 cm150 cm
220-240 V220-240 V
220-240 V
220-240 V220-240 V
1 deflector
1 chimney support
1 reduction flange Ø 125-120 mm
8 wood-screws5x45mm(for wall mounting-2asspare parts)
8 wall plugsØ8mm(for wall mounting-2asspare parts)
6 washers (2 for chimney support - 2 for lower fixing-2asspare parts)
8 metal screws 3,5 x 6,5 (for all fixing except - lower chimney fixing)
2 metal screws 3,5 x 9,5 (lower chimney fixing)
GB
1616
BROWN
CORD CLAMP
BLUE
GREEN & YELLOW
5AT
electroluxelectrolux
16
electrolux installation
1616
electroluxelectrolux
Electrical connection
(not for UK)
GB
Safety warSafety war
Safety war
Safety warSafety war
Before connecting the appliance to the
power supply, check that the voltage
indicated on the rating plate
corresponds to the mains power supply
available. Appliances fitted with a plug
can be connected to any standard
power socket within easy access.
Should it be necessary to provide a
fixed connection, the hood must only
be installed by an electrician authorised
by the local electricity board. When
installing, an omnipolar disconnector
with a distance of at least 3 mm
between contacts must be provided.
Fixed connection of the appliance must
only be carried out by an authorised
electrician.
nings for the electriciannings for the electrician
nings for the electrician
nings for the electriciannings for the electrician
Electrical connection for
UK only
Safety warSafety war
Safety war
Safety warSafety war
Connect the hood to the mains supply
via a double pole switch which has 3
mm minimum separation between the
contacts.
The switch must be accessible at all
times.
The following is valid in the United
Kingdom only:
- the wire which is coloured green and
yellow must be connected to the
terminal which is marked with the
letter E or by the earth symbol ( ),
or coloured green or green and
yellow;
- the wire which is coloured blue must
be connected to the terminal which is
marked with the letter N or coloured
black, -
- the wire which is coloured brown
must be connected to the terminal
which is marked with the letter L or
coloured red.
nings for the electriciannings for the electrician
nings for the electrician
nings for the electriciannings for the electrician
IMPORIMPOR
IMPOR
IMPORIMPOR
service assistance centre in order to prevent any risks.
TT
ANT!ANT!
T
ANT! Power cable repalcement must be undertaken by the authorized
TT
ANT!ANT!
electroluxelectrolux
electrolux installation
electroluxelectrolux
InstallationInstallation
Installation
InstallationInstallation
Make sure that the cooker hood is disconnected from the powerMake sure that the cooker hood is disconnected from the power
Make sure that the cooker hood is disconnected from the power
Make sure that the cooker hood is disconnected from the powerMake sure that the cooker hood is disconnected from the power
supply before carrying out the installation.supply before carrying out the installation.
supply before carrying out the installation.
supply before carrying out the installation.supply before carrying out the installation.
• Mark the wall with a centre line, this will aid mounting procedure
(1)(1)
(1), position
(1)(1)
the template so that the mid line printed on the template matches with the
centre line previously drawn, the lower side of the template corresponds to the
lower side of the hood once mounted
• Drill four holes Ø 8mm and fit four wall plugs
• Drill two holes Ø 8mm on the upper side close to the ceilling
(2)(2)
(2).
(2)(2)
(3)(3)
(3).
(3)(3)
(4(4
(4) use the
(4(4
chimney support as a template, check that the mid of the chimney support
corresponds to the mid of the centre line previously drawn, fit two wall plugs.
Note:Note:
ONLONL
Note:
Note:Note:
deflector
YY
ONL
Y in case the hood is to be used in
ONLONL
YY
EE
E on the chimney support and the connection flange
EE
screws each
(5).(5).
(5).
(5).(5).
filter versionfilter version
filter version , mount the
filter versionfilter version
GG
G with two
GG
• Put the chimney support close to the ceiling to the vertical of the cooking
place, use the centre line
(1)(1)
(1) for easy positioning, mark two holes onto the wall
(1)(1)
and drill, then insert two wall plugs and fix the chimney support with two
screws and washers
(6)(6)
(6).
(6)(6)
• Screw two screws (do not tighten completely, leave them so that can be used
to hang the hood), hang the hood
definitively with two screws and washers
(7)(7)
(7), remove the grease filters and fix it
(7)(7)
(8),(8),
(8), check that all four screws are
(8),(8),
securely tightened.
• Fit an exhaust pipe
connection flange
(9)(9)
(9) to connect the outlet hole
(9)(9)
GG
G of the deflector
GG
EE
E (Filter version) or to the outside (Extractor
EE
DD
D of the hood to the
DD
version).
• Make electrical connection
(10)(10)
(10), but leave the hood disconnected from the
(10)(10)
mains supply.
• Place the cable clamp in the corresponding housing
(11)(11)
(11).
(11)(11)
• Fix the control panel to the rear bracket on the lower section of the chimney
with two screws (
1212
12 - Cable must be positioned upwards to have correct
1212
position of control switches).
• Position the chimney and secure them in place, first up
support
(13b)(13b)
(13b) .
(13b)(13b)
• Then slide the chimney downwards making sure the cable clamp
seated in the housing on chimeny
(14)(14)
(14).
(14)(14)
(13a)(13a)
(13a) to the chimney
(13a)(13a)
(step 11)(step 11)
(step 11) is
(step 11)(step 11)
• Fix the lower section of the chimney with two screws from the inside of the
(15)(15)
hood
(15).
(15)(15)
• Refit the grease filters, connect the hood and the home general electric panel
and check if the hood works properly.
1717
17
1717
GB
GB
1818
electroluxelectrolux
18
electrolux installation
1818
electroluxelectrolux
13a
10
13a
6
13b
4
12
12
14
Fig. 8 - Mounting
11
15
E
5
G
1
7
9
D
7
2
15
8
3
LI26QA Ed. 04/07
Loading...