AEG BP5003001M, BC5003001M User Manual

BP5003001

EN OVEN

USER MANUAL

2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of accessories designed and built to the high quality standards you would expect, from specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…

Visit the webshop at:

www.aeg-electrolux.com/shop

Contents 3

CONTENTS

4 Safety information

7 Product description

9 Before first use

9 Daily use

11 Clock Functions

13 Using the Accessories

14 Additional Functions

15 Helpful hints and tips

24 Care and cleaning

27 What to do if…

29 Installation

30 Environment concerns

31 Warranty

The following symbols are used in this user manual:

Important information concerning your personal safety and information on how to avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

4 Safety information

SAFETY INFORMATION

Before the installation and use, read this manual carefully:

For your personal safety and the safety of your property

For the respect of the environment

For the correct operation of the appliance.

Always keep these instructions with the appliance also if you move or sell it.

The manufacturer is not responsible if incorrect installation or use results in damage.

Children and vulnerable people safety

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in safe way and understand the hazards involved. Children shall not play with the appliance.

Keep all packaging away from children. There is the risk of suffocation or physical injury.

Keep children and animals away from the appliance when the door is open or the appliance is in operation. There is the risk of injury or other permanent disability.

If the appliance has Child Lock or Key Lock (Control Lock) function, use it. It prevents children and animals from accidental operation of the appliance.

General safety

Do not change the specifications of this appliance. There is the risk of injury and damage to the appliance.

Do not let the appliance stay unattended during operation.

Switch off the appliance after each use.

Installation

Only an approved electrician can install and connect the appliance. Contact an approved service centre. This is to prevent the risks of structural damage or physical injury.

Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier.

Remove all packaging, stickers and layers from the appliance before first use. Do not remove the rating plate. It can invalidate the guarantee.

Make sure that the appliance is disconnected from the power supply during the installation.

Be careful when you move the appliance. The appliance is heavy. Always use safety gloves. Do not lift the appliance by the handle.

The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

You must have correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.

Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable.

Safety information

 

5

 

 

Make sure that the appliance is installed below and adjacent safe structures.

Keep the minimum distances to the other appliances and units.

The appliance cannot be positioned on a base.

Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.

Electrical connection

The appliance must be earthed.

Make sure that the electrical data on the rating plate agree with your domestic power supply.

Information on the voltage is on the rating plate.

Always use a correctly installed shockproof socket.

Do not use multi-way plugs, connectors and extension cables. There is the risk of fire.

Do not replace or change the mains cable. Contact the service centre.

Make sure not to squash or cause damage to the mains plug (if applicable) and cable behind the appliance.

Do not pull the mains cable to disconnect the appliance. Always pull the mains plug – if applicable.

Use

The appliance is only for domestic use. Do not use the appliance for commercial and industrial use.

Only use the appliance for domestic cooking tasks. This is to prevent physical injury to persons or prevent damage to property.

Do not use the appliance as a work surface or storage surface.

The interior of the appliance and the accessories become hot during use. There is the risk of burns. Use safety gloves when you insert or remove the accessories or pots.

Be careful when you remove or install the accessories to prevent damage to the oven enamel.

Always stay away from the appliance when you open the door while the appliance is in operation. Hot steam can release. There is the risk of skin burns.

To prevent damage or discoloration to the enamel:

do not put any objects directly on the appliance floor and do not cover it with aluminium foil;

do not put hot water directly into the appliance;

do not keep moist dishes and food in the appliance after you finish the cooking.

Discoloration of the enamel has no effect on the performance of the appliance so it is not a defect in the sense of the warranty law.

Do not apply pressure on the open door.

Always close the appliance door when you cook, even while grilling.

6 Safety information

Care and cleaning

Before maintenance, switch off the appliance and disconnect the appliance from the power supply.

Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break.

Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.

Regular cleaning prevents the surface material from deteriorating

Use a deep baking tray for very moist cakes to prevent that fruit juices cause stains that can be permanent.

For your personal safety and the safety of your property, only clean the appliance with water and a soap. Do not use flammable products or products that can cause corrosion.

Do not clean the appliance with steam cleaners, high-pressure cleaners, sharp objects, abrasive cleaning agents, abrasive sponges and stain removers

If you use an oven spray, follow the instructions from the manufacturer.

Do not clean the glass door with abrasive cleaning agents or metal scraper. Heat resistant surface of the inner glass can break and shatter.

When the door glass panels are damaged they become weak and can break. You must replace them. Contact the service centre.

Be careful when you remove the door from the appliance. The door is heavy!

Do not clean catalytic enamel (if applicable).

Risk of fire

Open the door carefully. The use of ingredients with alcohol can cause a mixture of alcohol and air. There is the risk of fire.

Do not let sparks or open flames come near the appliance when you open the door.

Do not put flammable products or items that are wet with flammable products, and/or fusible objects (made of plastic or aluminium) in, near or on the appliance.

Pyrolytic cleaning

Do not leave the appliance unattended during Pyrolytic cleaning.

Do not try to open the door and do not cut the power supply during Pyrolytic cleaning.

Keep children away during pyrolytic cleaning. The appliance becomes very hot. There is the risk of burns.

During pyrolytic cleaning, stubborn dirt can cause discoloration to the enamel. Discoloration to the enamel has no effect on the performance of the appliance

Oven lamp

Bulb lamps used in this appliance are special lamps selected for household appliances use only. They cannot be used for the full or partial illumination of a household room.

If it becomes necessary to replace the lamp use one of the same power and specifically designed for household appliances only.

Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock.

Product description

 

7

 

 

Service centre

Only an approved engineer can repair or work on the appliance. Contact an approved service centre.

Use only original spare parts.

Disposal of the appliance

To prevent the risk of physical injury or damage

Disconnect the appliance from the power supply.

Cut off the mains cable and discard it.

Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.

PRODUCT DESCRIPTION

General overview

2

 

3

 

4

 

5

 

 

1

 

 

7

 

5

8

 

 

 

4

 

13

3

 

 

2

9

 

 

 

1

10

 

 

 

 

11

1Control panel

2Control knob for oven functions

3Power lamp/symbol

4Electronic programmer

5Control knob for temperature

6Temperature lamp/symbol/indicator

7Heating element

AEG BP5003001M, BC5003001M User Manual

8 Product description

8Oven lamp

9Fan

10Rear wall heating element

11Bottom heat

12Shelf support, removable

13Shelf positions

Oven accessories

Nonstick wire shelf

For cookware, cake tins, roasts.

Nonstick flat baking tray

For cakes and biscuits.

Nonstick grill / roasting pan

To bake and roast or as pan to collect fat.

Nonstick trivet

For roasting and grilling.

Use the trivet only with the roasting pan.

Before first use

 

9

 

 

BEFORE FIRST USE

WARNING!

Refer to "Safety information" chapter.

Initial Cleaning

Remove all parts from the appliance.

Clean the appliance before first use.

Refer to chapter "Care and Cleaning".

First connection to the mains

After first connection to the mains all symbols in the display are on for some seconds. For the subsequent few seconds the display shows software version.

Setting the time of day

After the software version goes off, the display shows and " 12:00 ". " 12 " flashes.

1. Press

 

 

or

 

to set current hour.

 

 

 

 

 

2.Press to confirm (necessary only for first the setting, later new time will be saved automatically after 5 seconds).

The display shows

and set hour. " 00 " flashes.

3. Press

 

 

or

 

to set current minutes.

 

 

 

 

 

4.Press to confirm (necessary only for first the setting, later new time will be saved automatically after 5 seconds) .

The Temperature/Time display shows new time.

Changing the time of day

You can change the time of day only if the oven is off.

Press . The set time and symbol flash in the display. To set new time use the procedure "Setting the time of day".

DAILY USE

WARNING!

Refer to "Safety information" chapter.

To use the appliance, press the control knob. The control knob comes out.

Activating and deactivating the appliance

1. Turn the oven functions control knob to select an oven function.

2. Turn the temperature control knob

 

 

/

 

to set a temperature.

 

 

 

 

 

3. To deactivate the appliance turn the oven functions control knob to off position ("0") .

10 Daily use

Knob symbol, indicator or lamp (depends on the model - refer to the appliance overview):

The indicator comes on when the oven heats up.

The lamp comes on when the appliance operates.

The symbol shows whether the knob controls one of the cooking zones, the oven functions or the temperature.

Oven Functions

 

 

 

 

 

 

Oven function

 

Application

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast Heat Up

 

To decreases the heat-up time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

True Fan Cooking

 

To bake maximum on three oven levels at the same time.

 

 

 

 

 

 

 

 

Decrease the oven temperatures (20-40 °C) compared

 

 

 

 

 

 

 

 

with Conventional. And to dry food.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pizza Setting

 

To bake on one oven level food with a more intensive

 

 

 

 

 

 

 

 

browning and a crispy base. Decrease the oven tempera-

 

 

 

 

 

 

 

 

tures (20-40 °C) compared with Conventional

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Conventional Cooking

 

To bake and roast on one oven level.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bottom Heat

 

To bake cakes with crispy or crusty bases and to preserve

 

 

 

 

 

 

 

 

food

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Defrost

 

To defrost frozen food.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Grilling

 

To grill flat food in the middle of the grill and to toast.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast Grilling

 

To grill flat food in large quantities and to toast.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turbo Grilling

 

To roast larger joints of meat or poultry on one level. Al-

 

 

 

 

 

 

 

 

so to gratinate and brown.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pyro Cleaning

 

For automatic pyrolytic cleaning of the oven. It burns off

 

 

 

 

 

 

 

 

residual dirt in the oven. The oven heats up to approxi-

 

 

 

 

 

 

 

 

mately 500°C.

 

 

 

 

 

 

 

 

 

Fast heat up function

The fast heat up function decreases the heat up time.

1.

Set the fast heat up function. Refer to Oven function table.

2.

Turn the temperature control knob

 

 

/

 

to set a temperature.

 

 

 

 

 

3.An acoustic signal operates when temperature is reached.

4.Set a correct oven function.

The fast heat up do not stop heat after an acoustic signal.

Clock Functions

 

11

 

 

Display

1Timer

2Heating Up / Residual heat indicator

3Water tank (selected models only)

4Core temperature sensor (selected models only)

5Door lock (selected models only)

6hr / min

7Clock functions

 

 

 

7

 

 

 

 

 

1

 

 

 

 

2

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

 

6

 

5

 

4

Buttons

 

Button

 

Function

 

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLOCK

 

To set the clock function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

,

 

 

 

 

MINUS, PLUS

 

To set a value for time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MINUTE MINDER

 

To set the minute minder. To switch ON/OFF

 

 

 

 

 

 

 

 

 

light in oven cavity, hold button more than 3

 

 

 

 

 

 

 

 

 

seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMPERATURE

 

To check temperature inside the oven cavity.

 

 

 

 

 

 

 

 

 

To check the Core Temperature Sensor tem-

 

 

 

 

 

 

 

 

 

perature, when is connected (if applicable).

 

 

 

 

 

 

 

 

 

Use only when the oven function is set.

 

 

 

 

 

 

 

 

 

 

Heat-up / Residual heat indicator

If you activate an oven function, the bars in the display come on one by one. The bars show that the oven temperature increases or decrease.

CLOCK FUNCTIONS

SYMBOL

FUNCTION

 

DESCRIPTION

 

 

 

 

 

 

 

 

 

MINUTE MINDER

 

Use to set a countdown time. This function has no effect on

 

 

 

 

 

the operation of the oven.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TIME OF DAY

 

To set, change or control the time of day. Refer to 'Setting the

 

 

 

 

 

time of day'.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DURATION

 

Use only when the oven function is set to set how long the

 

 

 

 

 

oven operates.

 

 

 

 

 

 

 

 

 

END

 

Use only when the oven function is set to set when the oven

 

 

 

 

 

stops. You can use Duration and End at the same time (Time

 

 

 

 

 

delay), if the appliance is to be activate and deactivate auto-

 

 

 

 

 

matically later.

 

 

 

 

 

 

Press again and again to switch between the clock functions.

Loading...
+ 25 hidden pages