To ensure optimal and regular performance of your appliance please read this instruc-
Thank you for choosing one of our high-quality products.
tion manual carefully. It will enable you to navigate all processes perfectly and most ef-
To refer to this manual any time you need to, we recommend you to keep it in a safe
place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating Instructions 3
Safety instructions 3
Description of the Appliance 4
General Overview 4
Control Panel 5
Oven Features 5
Oven accessories 6
Before Using for the first time 7
Setting and changing the time 7
Initial cleaning 8
Using the Oven 8
Switching the Oven On and Off 8
Rapid heat up 10
Oven Functions 11
Inserting the Oven Shelf, Baking Tray
and Roasting Pan 12
Non-stick accessories 13
Inserting/Removing the Fat Filter 13
Clock Functions 13
Other Functions 19
Outside of the appliance 30
Oven interior 31
Accessories 31
Fat Filter 31
Non-stick accessories 31
Pyrolytic cleaning 31
Shelf Support Rails 32
Oven lighting 33
Oven door 34
Oven door glass 36
What to do if … 39
Disposal 40
Service 41
The following symbols are used in this user manual:
Important information concerning your personal safety and information on how to
avoid damaging the appliance.
3General information and tips
2Environmental information
Operating Instructions
1Safety instructions
Electrical safety
• This appliance must be only connected by a registered electrician.
• In the event of a fault or damage to the appliance: Take the fuses out or switch off.
• Repairs to the appliance must only be carried out by qualified service engineers.
Considerable danger may result from improper repairs. If repairs become necessary,
please contact our Customer Services or your dealer.
Child Safety
• Never leave children unsupervised when the appliance is in use.
Safety whilst using
• People (including children) who, because of their physical, sensory or mental capabilities or their inexperience or ignorance are not able to use the device safely, should not
use this device without supervision or instruction by a responsible person.
• This appliance is intended to be used for cooking, roasting and baking food in the
home.
• Take care when connecting electric appliances to sockets nearby. Do not allow con-
necting leads to come into contact with or to catch beneath the hot oven door.
• Warning: Risk of burns! The interior of the oven becomes hot during use.
• Using ingredients containing alcohol in the oven may create an alcohol-air mixture
that is easily ignited. In this case, open the door carefully. Do not have embers, sparks
or naked flames in the vicinity when opening the door.
3Operating Instructions
3Information on acrylamides
According to the latest scientific knowledge, intensive browning of food, especially in
products containing starch, can constitute a health risk due to acrylamides. Therefore we
recommend cooking at the lowest possible temperatures and not browning foods too
much.
How to avoid damage to the appliance
• Do not line the oven with aluminium foil and do not place baking trays, pots, etc. on
the oven floor, as the heat that builds up will damage the oven enamel.
• Fruit juices dripping from the baking tray will leave stains, which you will not be able
to remove. For very moist cakes, use a deep tray.
• Do not put any strain on the oven door when open.
• Never pour water directly into the oven when it is hot. This could cause damage to or
discolouration of the enamel.
• Rough handling, especially around the edges of the front panel, can cause the glass to
break.
• Do not store any flammable materials inside the oven. These could ignite when the
oven is switched on.
Description of the Appliance4
• Do not store any moist foods inside the oven. This could damage the oven enamel.
• After switching off the cooling fan, do not keep uncovered dishes in the oven. Mois-
ture may condense in the oven interior or on the glass doors and may get into the
units.
3Note on enamel coating
Changes in the colour of the oven’s enamel coating as a result of use do not affect the
appliance’s suitability for normal and correct use. They therefore do not constitute a defect in the sense of the warranty law.
Description of the Appliance
General Overview
Control panel
Door
handle
Full glass door
Control Panel
5Description of the Appliance
Oven Power IndicatorOven Power Indicator
Temperature / Time Display
Oven Features
Shelf positions
Oven Functions
Top heat and heating elements
Temperature / Time Selection
Function buttons
Oven lighting
Fat Filter
Fan heating element
Fan
Bottom Heat
Oven shelf runners,
removable
Description of the Appliance6
Inside of door
On the inside of the oven door you will find the
numbers of the different oven shelves.
You will also find some brief information about
the oven's functions, recommended shelves and
temperatures for cooking the most popular
dishes.
Oven accessories
Oven shelf
For cookware, cake tins, roasts and grilled foods.
Baking tray
For cakes and biscuits.
Non-stick baking tray
For cakes and biscuits.
Non-stick roasting tray
For baking and roasting or as a tray for collecting fat.
Before Using for the first time
Setting and changing the time
3The oven only operates when the time has been set.
When the appliance has been connected to the
electrical supply or when there has been a power cut, the function indicator Time of
dayflashes automatically.
1. To change a time that has already been set,
press the Selection button repeatedly until
the function indicator Time of day flashes.
2. Using the / control knob, set the current
time.
7Before Using for the first time
After approx. 5 seconds, the flashing stops and
the clock displays the time of day set.
The appliance is now ready to use.
3The time can only be modified, if the child safe-
ty device is deactivated, none of the Minute
Minder , Duration or End clock functions and no oven function is set.
Using the Oven8
Initial cleaning
Clean the oven before using it for the first time.
1Important: Do not use caustic or abrasive cleaning agents! These can damage the oven
surfaces.
3For the metal surfaces, use commercially available cleaning agents.
1. Open the oven door.
The oven light is illuminated.
2. Remove all oven accessories, and clean them with warm water and a scouring agent.
3. Wash the oven in the same way, and wipe dry.
4. Wipe the front of the appliance with a damp cloth.
Using the Oven
3The oven is equipped with retractable buttons for “Oven functions” and “Temperature
selection”. To use, press the relevant button. The button then sticks out.
Switching the Oven On and Off
Oven Power Indicator
Temperature / Time
Display
Oven Power Indicator
Oven Functions
Speedcook
Button Speedcook
Change display
Heat indicator
Selector Button
Temperature / Time Selection
Switching the oven on
Turn the oven functions selector to the desired
function. The power indicator light lights up.
The temperature display shows the suggested
temperature for the oven function selected.
The oven starts to heat up.
When the temperature set is reached, an audible signal sounds.
Changing the oven temperature
Turn the / knob to raise or lower the temperature.
The setting changes in 5 °C steps.
Checking the temperature
Press Rapid heat up and Selection buttons at the same time.
The current oven temperature appears in the
temperature display.
9Using the Oven
Switching the oven off
To turn the oven off, turn the oven functions
selector to the OFF position.
3Cooling fan
The fan switches on automatically in order to keep the appliance’s surfaces cool. When
the oven is switched off, the fan continues to run to cool the appliance down, then
switches itself off automatically.
Using the Oven10
3Heat indicator
Indicates warming up
When the oven function has been switched on
the bars that slowly light up one after the other
indicate how far the oven has heated up.
Fast heat indicator
When the fast heat function has been
switched on the bars that flash one after
the other indicate that fast heat is operating. In
addition the bars next to the symbol light
up.
Residual heat indicator
When the oven has been switched off, the bars
that are still lit indicate the remaining residual
heat in the oven.
Rapid heat up
After an oven function is selected, using the additional function Rapid heat up the
empty oven can be pre-heated in a relatively short time.
1Important: Do not put the food to be cooked into the oven, until Rapid heat up is
completed and the oven is operating using the desired function.
1. Set the desired oven function (e. g., Conventional). If necessary, change the suggested
temperature.
11Using the Oven
2. Press the Rapid heat up button. The bars next to the symbol light up.
When the bars flash one after another it shows that Rapid heat up is operating.
When the temperature set is reached, the bars of the heat indicator light up and the bars
next to the symbol go out. An audible signal sounds.
The oven now continues heating according to the pre-set oven function and temperature. You can now place the food in the oven.
3The Rapid heat up function can be switched on with the oven functions True fan, Fan
baking, Conventional and Rotitherm.
Oven Functions
The oven has the following functions:
Oven functionApplication
True fan For baking on up to three oven levels at the same time.
Fan bakingFor baking on one oven level dishes that require more inten-
ConventionalFor baking and roasting on one oven level.
RotithermFor roasting larger joints of meat or poultry on one level.
Dual grill For grilling flat food items in large quantities and for toasting.
Single grill For grilling flat food items placed in the middle of the grill
DefrostFor defrosting e. g. flans and gateaux, butter, bread, fruit or
Base heatFor baking cakes with crispy or crusty bases.
Pyroluxe menueFor automatic pyrolytic cleaning of the oven. It burns off resi-
Set the oven temperatures 20-40 °C lower than when using
Conventional.
sive browning and a crispy base.
Set the oven temperatures 20-40 °C lower than when using
Conventional.
The function is also suitable for gratinating and browning.
and for toasting.
other frozen foods.
dues in the oven, which can then be removed with a cloth
when the oven has cooled down. The oven is heated to approximately 500° C.
Using the Oven12
Inserting the Oven Shelf, Baking Tray and Roasting Pan
3Shelf runner safety and anti-tip device
As a shelf runner safety device, all insertable components have a small curved indentation at the bottom on the right and left-hand edge.
Always insert insertable components so that this indentation is at the back of the oven
interior. This indentation is also important for preventing the insertable components
from tipping.
Inserting the baking tray or roasting pan
Push the baking tray or roasting pan between
the guide bars of the selected oven level.
Inserting the oven shelf:
Insert the oven shelf so that the feet point
downwards.
Push the oven shelf between the guide bars of
the selected oven level.
3The high rim around the oven shelf is an addi-
tional device to prevent cookware from slipping.
Inserting the oven shelf and roasting pan
together
Lay the oven shelf on the roasting pan.
Push the roasting pan between the guide bars
of the selected oven level.
Non-stick accessories
To ensure that this accessory remains stable and permanently easy to clean, you should
follow these instructions:
• Do not put accessories into the oven without any food.
• Do not place accessories on hot cooking surfaces, as the non-stick properties can be
damaged by overheating.
Inserting/Removing the Fat Filter
Only use the fat filter when roasting to protect the rear heating elements from fat splashes.
Inserting the fat filter
Hold the fat filter by the grip and insert
the two mounts downwards into the
opening on the rear wall of the oven
(fan opening).
Taking out the fat filter
Hold the fat filter by the grip and unhook it.
Clock Functions
Temperature / Time Display
13Using the Oven
Clock function indicators
Selector Button
Change display
Using the Oven14
Duration
To set how long the oven is to be in use.
End
To set when the oven is to switch off again.
Minute Minder
To set a countdown. A signal sounds after the time has elapsed.
This function does not affect the functioning of the oven.
Time of day
To set, change or check the time
(See also section “Before Using for the First Time”).
3How to use the clock functions
• After a clock function has been selected, the corresponding function indicator flashes
for about 5 seconds. During this period, the desired times can be set or modified using
the / dial.
• When the desired time has been set, the function indicator continues to flash for
approx. 5 seconds. After that the function indicator is then lit. The set time begins to
run in the background.
• When the clock functions Duration and End have been completed, the oven
functions dial must be turned back to ”0“.
• Using the Display button, you can switch between the oven temperature and the
time.
3Checking the time set or remaining.
Press the Selection button repeatedly, until the appropriate clock function flashes
and the time set or remaining is displayed.
Minute Minder
1. Press the Selection button repeatedly until
the function indicator Minute Minder flashes.
2. Using the / control knob set the desired
countdown (max. 99.00minutes).
The function indicator Minute Minder lights
up.
When 90% of the time set has elapsed, an audible signal sounds.
When the time has elapsed, ”0.00“ and the
function indicator flash.
An audible signal sounds.
To stop the flashing and the audible signal:
Press any button.
15Using the Oven
Using the Oven16
Duration
1. Select the oven function and temperature.
2. Press the Selection button repeatedly until
the function indicator Duration flashes.
3. Using the / control knob set the desired
cooking time.
The function indicator Duration lights up
and the oven comes on immediately.
When the time has elapsed, ”0.00“ and the
function indicator flash.
An audible signal sounds for 2 minutes. The
oven switches itself off.
To stop the flashing and the audible signal:
Turn the oven functions dial to ”0”.
End
1. Select the oven function and temperature.
2. Press the Selection button repeatedly until
the End function indicator flashes.
3. Using the / control knob set the desired
switch-off time.
The function indicator End lights up and the
oven comes on immediately.
17Using the Oven
When the time has elapsed, ”0.00“ and the
function indicator flash.
An audible signal sounds for 2 minutes. The ovenswitches itself off.
To stop the flashing and the audible signal:
Turn the oven functions dial to ”0”.
Using the Oven18
Duration and End combined
3Duration and End can be used simultaneously, if the oven is to be switched on and
off automatically at a later time.
1. Select the oven function and temperature.
2. Using the Duration function, set the time
that the dish needs to cook.
In this example, 1 hour.
3. Using the End function, set the time at
which the dish should be ready.
In this case, 14:05.
The Duration and End function indicators
light up and the temperature is shown in the
display.
In this example, 200°C.
The oven switches on automatically at the time
calculated.
In this case, at 13:05.
And switches itself off again when the cook
time entered has elapsed.
In this case, at 14:05.
19Using the Oven
Other Functions
Oven’s child safety device
The oven is fitted with a child safety device. As soon as the child safety device is activated, the oven cannot be switched on.
3For the child safety device to be activated, none of the oven functions must be currently
selected.
Activating the child safety device
1. Turn the / dial to the left and hold it.
2. In addition press the Selection button until
“SAFE” appears ”in the“ display.
The child safety device is now activated.
Deactivating the child safety device
1. Turn the / dial to the left and hold it.
2. In addition press the Selection button until “SAFE” disappears ”from“ the display.
The child safety device is now deactivated and the oven is again ready for use.
Uses, Tables and Tips20
Oven automatic cut-out
3If not switched off after a certain time, or if the temperature is not modified, the oven
switches off automatically.
The last temperature set flashes in the temperature display.
The oven switches off when the oven temperature is:
Switch the oven off completely.
It can then be switched on again.
3The automatic cut-out is cancelled if the clock function Duration or End is set.
Uses, Tables and Tips
Baking
Oven function: True fan or Conventional
Baking tins
• For Conventional dark metal and non-stick tins are suitable.
• For True fan bright metal tins are also suitable.
Oven levels
• Baking with Conventional is possible on one oven level.
• With True fan you can bake on up to 3 baking trays at the same time:
1 baking tray:
e.g. oven level 3
1 cake tin:
e.g. oven level 1
21Uses, Tables and Tips
2 baking trays:
z. g., oven levels 1 and 3
3 baking trays:
oven levels 1, 3 and 5
General instructions
• Insert the tray with the bevel at the front.
• With Conventional or True fan you can also bake with two tins next to one an-
other on the oven shelf at the same time. This does not significantly increase baking
time.
3When frozen foods are used the trays inserted may distort during cooking. This is due to
the large difference in temperature between the freezing temperature and the temperature in the oven. Once the trays have cooled the distortion will disappear again.
How to use the baking tables
The tables give the required temperature settings, baking times and oven shelf levels for
a selection of typical dishes.
• Temperatures and baking times are for guidance only, as these will depend on the
consistency of pastry, dough or mixture, the amount and the type of baking tin.
• We recommend using the lower temperature the first time and then if necessary, for
example, if a deeper browning is required, or baking time is too long, selecting a higher temperature.
• If you cannot find the settings for a particular recipe, look for the one that is most
similar.
• If baking cakes on baking trays or in tins on more than one level, baking time may be
extended by 10-15 minutes.
• Moist recipes (for example, pizzas, fruit flans, etc.) are baked on one level.
• Cakes and pastries at different heights may brown at an uneven rate at first. If this oc-
curs, please do not change the temperature setting. Different rates of browning
even out as baking progresses.
• Your new oven may bake or roast differently to your previous appliance. So adapt
your normal settings (temperature, cooking times) and oven shelf levels to the recommendations in the following tables.
2With longer baking times, the oven can be switched off about 10 minutes before the end
of baking time, to make use of the residual heat.
Unless otherwise stated, the values given in the tables assume that cooking is started
with the oven cold.
Uses, Tables and Tips22
Baking table
Baking on one oven level
Type of
baking
Oven function
Oven
level
Temperature
°C
Time
Hr: Mins.
Baking in tins
Ring cake or briocheTrue fan1150-1600:50-1:10
Madeira cake/fruit cakesTrue fan1140-1601:10-1:30
Sponge cakeTrue fan11400:25-0:40
Sponge cakeConventional11600:25-0:40
Flan base - short pastry True fan3170-180
1)
0:10-0:25
Flan base - sponge mixtureTrue fan3150-1700:20-0:25
Oven function: Single grill or Dual grill with maximum temperature setting
1Important: Always grill with the oven door closed.
Shelf
position
Tempera-
ture
°C
Time
Hours mins.
3The empty oven should always be pre-heated with the grill functions for 5 min-
utes.
• For grilling, place the shelf in the recommended shelf position.
• Always insert the tray for collecting the fat into the first shelf position from the
bottom.
• The grilling times are guidelines.
• Grilling is particularly suitable for flat pieces of meat or fish.
Uses, Tables and Tips28
Grilling table
Burgers48-10 mins.6-8 mins.
Pork fillet410-12 mins.6-10 mins.
Sausages48-10 mins.6-8 mins.
Fillet steaks, veal steaks46-7 mins.5-6 mins.
Fillet of beef, roast beef
(approx. 1 kg)
Toast
Toast with topping36-8 mins.---
1) Do not pre-heat
Defrosting
Oven function: Defrost (no temperature setting)
• Unwrap the food and place it on a plate on the oven shelf.
• Do not cover with a plate or bowl, as these can substantially lengthen the defrosting
• For defrosting, place the shelf in the 1st oven level from the bottom.
Defrosting table
Chicken, 1000 g100-14020-30
Meat, 1000 g100-14020-30Turn halfway through
Meat, 500 g90-12020-30Turn halfway through
Trout, 150g25-3510-15---
Strawberries, 300g30-4010-20---
Butter, 250g30-4010-15---
Cream, 2 x 200 g80-10010-15
Gateau, 1400g6060---
Food to be grilledOven level
1)
time.
Dish
Defrosting
time
mins.
time (mins.)
Grilling time
1st side2nd side
310-12 mins.10-12 mins.
34-6 mins.3-5 mins.
Further
defrosting
Comments
Place the chicken on an upturned saucer
placed on a large plate
Turn halfway through
Cream can also be whipped when still
slightly frozen in places
Drying
29Uses, Tables and Tips
Oven function: True fan
• Use oven shelves covered with greaseproof paper or baking parchment.
• You get a better result if you switch the oven off halfway through the drying time,
open the door and leave the oven to cool down overnight.
• After this, finish drying the food to be dried.
Food to be dried
Vegetables
Beans60-7031 / 46-8
Peppers (strips)60-7031 / 45-6
Vegetables for soup60-7031 / 45-6
Mushrooms50-6031 / 46-8
Herbs40-5031 / 42-3
Fruit
Plums60-7031 / 48-10
Apricots60-7031 / 48-10
Apple slices60-7031 / 46-8
Pears60-7031 / 46-9
Making preserves
Oven function: Base heat
• For preserving, use only commercially available preserve jars of the same size.
• Jars with twist-off or bayonet type lids and metal tins are not suitable.
• When making preserves, the first shelf position from the bottom is the one most
used.
• Use the shelf for making preserves. There is enough room on this for up to six 1-litre
preserving jars.
• The jars should all be filled to the same level and clamped shut.
• Place the jars on the baking tray in such a way that they are not touching each other.
• Pour approx. 1/2 litre of water into the baking tray so that sufficient moisture is pro-
duced in the oven.
• As soon as the liquid starts to pearl in the first jars (after about 35-60 minutes with
1 litre jars), switch the oven off or reduce the temperature to 100°C (see table).
Temperature in
°C
Oven level
1 level2 levels
Time in hours
(Guideline)
Cleaning and Care30
Preserves table
The times and temperatures for making preserves are for guidance only.
1Warning: First switch off the appliance and let it cool down before carrying out any
cleaning.
Warning: For safety reasons, do not clean the appliance with steam blasters or high-
pressure cleaners.
Attention: Do not use any corrosive cleaning fluids, sharp objects or stain removers.
Do not clean the glass oven door with abrasive fluids or metal scrapers, which could
scratch the surface. The glass could crack and shatter.
Outside of the appliance
• Wipe the front of the appliance with a soft cloth and a solution of hot water and
washing up liquid.
• For metal fronts, use normal commercially available cleaning agents.
• Please do not use scouring agents and abrasive sponges.
31Cleaning and Care
Oven interior
1Warning: For the purpose of cleaning the oven must be switched off and have cooled
down.
3Clean the appliance after each use. In this way, residue is easier to clean off and does
not have the chance to burn on. Residue that is not removed may cause changes to the
surface colour when Pyroluxe menue is used.
1. The oven light switches on automatically when the oven door is opened.
2. After every use, wipe the oven with a solution of washing-up liquid and allow to dry.
3In the event of stubborn dirt, clean using Pyroluxe menue.
1Important: If you are using an oven spray, be sure to follow the manufacturer´s instruc-
tions.
Accessories
Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after each use and
dry well. Soak briefly to make them easier to clean.
Fat Filter
1. Clean the fat filter in hot water and washing up liquid or in the dishwasher.
2. Badly burned on soiling can be removed by boiling the filter in a little water to which 2-
3 tablespoonsful of dishwasher cleaner has been added.
Non-stick accessories
Clean accessories with a soft sponge or cloth in hot water and washing-up liquid.
3Bright spots in the coating do not mean that the surface is damaged.
1Important: Do not use any aggressive or scouring cleaning agents, spray oven
cleaners, steel soap pads or hard objects such as knives or sharp-edged scrapers.
These destroy the coating.
1Important: Do not clean these accessories in the dishwasher. The non-stick proper-
ties would be lost as a result.
Pyrolytic cleaning
1Warning: The oven gets extremely hot during this process. Young children must be kept
away.
1Important! Before carrying out pyrolytic cleaning, all removable partsincluding the side
rails, must be removed from the oven.
3If you use the oven shelf runners that are available as special accessories, these must
be removed before pyrolytic cleaning.
If the side rails or oven shelf runners are still in place, ‘C1’ appears in the clock display.
The pyrolytic cleaning process then cannot be started due to a safety cut-out that protects the side rails/oven shelf runners.
Cleaning and Care32
Pyrolytic cleaning
1. First remove the worst of the residue manually.
2. Select oven function Pyroluxe menue.
– “3:15” appears in the display,
– Cook time flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3The Light does not work.
When a pre-set temperature is reached, the door is locked.
The bars of the heat indicator light up, until the door is unlocked again.
Changing the length of time for the pyrolytic cleaning
1. Proceed as described in the section “Pyrolytic cleaning”.
2. As long as Duration is flashing, select the desired length for the process using or
:
“ / 2:15” or “3:15”
Duration flashes for approx. 5 seconds.
Pyrolytic cleaning then starts.
3If Duration is no longer flashing, press the Selection button again and then per-
form the setting procedure.
Changing the switch-off time for the pyrolytic cleaning
The switch-off timecan be delayed using the clock function End (within 2 minutes of
the pyrolytic cleaning starting).
When the different processes for pyrolytic cleaning are set:
P2 - 2:15 = Pyroluxe menue easy: For a light degree of soiling,
P1 - 3:15 = Pyroluxe menue intensive: For a high degree of soiling.
Shelf Support Rails
The shelf support rails on the left and right hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall (1) and then unhitch at the back (2).
Fitting the shelf support rails
3Important! The rounded ends of the guide rails
must be pointing forwards!
To re-insert, first hook the rail into place at the
back (1) and then insert the front and press into
place (2).
33Cleaning and Care
Oven lighting
1Warning: There is a danger of electric shock! Prior to changing the oven light bulb:
– Switch off the oven!
– Remove the fuses in the fuse box or switch off the circuit breaker.
3Place a cloth on the oven floor to protect the oven light and glass cover.
Replacing the oven light bulb/cleaning the
glass cover
1. Remove the glass cover by turning it anti-
clockwise and then clean it.
2. If necessary:
Replace bulb with a 40 watt, 230 V, 300 °C
heat-resistant oven light bulb.
3. Refit the glass cover.
Cleaning and Care34
Oven door
For easier cleaning of the oven interior the oven door of your appliance can be taken off
its hinges.
Removing the oven door from its hinges
1. Open the oven door as far as it will go.
2. Undo the clamping levers (A) on both door hinges fully.
3. Close the oven door as far as the first position
(approx. 45°).
4. Take hold of the oven door with a hand on each
side and pull it away from the oven at an upwards angle (Take care: It is heavy).
3Lay the oven door with the outer side facing
downwards on something soft and level, for example, a blanket in order to prevent scratches.
Hanging the oven door back on its hinges
1. From the handle side take hold of the oven
door with a hand on each side and hold at an
angle of approx. 45°.
Position the recesses on the bottom of the oven
door on the hinges on the oven.
Let the door slide down as far as it will go.
2. Open the oven door as far as it will go.
3. Fold up the clamping levers (A) on both door
hinges back into their original positions.
35Cleaning and Care
4. Close the oven door.
Cleaning and Care36
Oven door glass
The oven door is fitted with four panels of glass mounted one behind the other. The inner panels can be removed for cleaning.
1Important Rough handling, especially around the edges of the front panel, can cause
the glass to break.
Removing door glass panels
1. Open the oven door as far as it will go.
2. Undo the clamping levers (A) on both door hinges fully.
3. Close the oven door as far as the first position
(approx. 45°).
4. Take hold of the door trim (B) on the upper
edge of the door at both sides and press inwards to release the clip seal. Then remove the
door trim by pulling it upwards.
5. Take hold of the door glass panels on their upper edge one after the other and take them out
of the guide by pulling them upwards.
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing up liquid.
Then dry them carefully.
Putting the door glass panels back.
1. From above insert the door glass panels one af-
ter the other into the door profile at the bottom edge of the door at an angle and lower
them.
3The two smaller panels first, then the larger
panel.
37Cleaning and Care
2. Take hold of the door trim (B) at each side, position it on the inside edge of the door and plug
the door trim (B) into the upper edge of the
door.
Cleaning and Care38
3On the open side of the door trim (B) there is a
guide bar (C). This must be pushed between the
outer door panel and the guide corner (D).
The clip seal (E) must be snapped in.
3. Open the oven door as far as it will go.
4. Fold up the clamping levers (A) on both door
hinges back into their original positions.
5. Close the oven door.
39What to do if …
What to do if …
ProblemPossible causeRemedy
The oven does not heat upThe oven has not been
The oven lighting is not operating
The pyrolysis function is not
working (“C1“ is shown in the
time display)
F2 appears in the clock display Door not properly closed or
An error code not listed above
appears in the time display
If you are unable to remedy the problem by following the above suggestions,
switched on
The clock has not been set to
the current time
The required settings have not
been set
The oven’s automatic cut-out
has been triggered.
The house wiring fuse (in the
fuse box) has tripped
The oven light bulb is faultyReplace oven bulb
Side rails/oven shelf runners
have not been removed
door lock defective
Electronic errorSwitch the appliance off and
Switch on the oven
Set the clock to the current
time
Check the settings
See Automatic cut-out
Check fuse If the fuses trip
several times, please call a
qualified electrician
Remove side rails/oven shelf
runners
Close door properly;
Turn the appliance off and on
again via the house fuse or
the safety switch in the fuse
box;
If displayed again, please contact the Customer Care Department
on again by way of the house
wiring fuse or the circuit
breaker in the fuse box.
If the display appears again,
please contact customer service
please contact your local Service Force Centre.
1Warning! Repairs to the appliance are only to be carried out by qualified service engi-
neers. Considerable danger to the user may result from improper repairs.
3If the appliance has been operated incorrectly, the engineer's visit will be chargeable,
even during the warranty period.
3Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door during (or
just after) baking or roasting may cause the glass to steam up.
Disposal40
Disposal
2Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic
components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities.
2Old appliance
The symbol
be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
W on the product or on its packaging indicates that this product may not
1Warning: So that the old appliance can no longer cause any danger, make it unusable
before disposing of it.
To do this, disconnect the appliance from the mains supply and remove the mains
cable from the appliance.
Service
In the event of technical faults, please first check whether you can remedy the problem
yourself with the help of the operating instructions (section “What to do if…”).
If you were not able to remedy the problem yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we require the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
– Type of fault
– Any error messages displayed by the appliance
So that you have the necessary reference numbers from your appliance at hand, we recommend that you write them in here:
Model description:.....................................
41Service
(for numbers see rating plate)
PNC:.....................................
S No:.....................................
www.electrolux.com
387 996 656-A-030609-01Subject to change without notice
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.