This appliance conforms with the following EU Directives:
5
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Electrical safety
• This appliance must be connected by a qualified electrician only.
• In the event of a fault or damage to the appliance: take the fuses out
or switch off.
• Repairs to the appliance must only be carried out by qualified
service engineers. Considerable danger may result from improper re-
pairs. If repairs become necessary, please contact your local Service
Force Centre.
Child Safety
• Never leave children unsupervised when the appliance is in use.
Safety whilst Using
• This appliance is intended to be used for cooking, frying and baking
food in the home.
• Take care when connecting electric appliances to sockets nearby. Do
not allow connecting leads to come into contact with hot rings or to
catch beneath the hot oven door.
• Warning: Risk of burns! The interior of the oven becomes hot dur-
ing use.
• Using ingredients containing alcohol in the oven may create an alcohol-air mixture that is easily ignited. In this case, open the door carefully. Do not have embers, sparks or naked flames in the vicinity when
opening the door.
5
How to avoid damage to the appliance
• Do not line the oven with aluminium foil and do not place baking
trays, pots, etc. on the oven floor, as the heat that builds up will damage the oven enamel.
• Fruit juices dripping from the baking tray will leave stains, which you
will not be able to remove. For very moist cakes, use a deep tray.
• Do not put any strain on the oven door when open.
• Never pour water directly into the oven when it is hot. This could
cause damage to the enamel and discoloration.
• Rough handling, especially around the edges of the front panel, can
cause the glass to break.
• Do not store any flammable materials inside the oven. These could ignite when the oven is switched on.
• Do not store any moist foods inside the oven. This could damage the
oven enamel.
Disposal
2
Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
2Old appliance
Please dispose of your old appliance in line with the guidelines for disposal in your area.
1 Warning: Before disposing of old appliances please make them inoper-
able so that they cannot be a source of danger.
To do this, disconnect the appliance from the mains supply and remove the mains cable from the appliance.
6
Description of the Appliance
General Overview
Control panel
Door
handle
Full glass
door
7
Control Panel
Oven power indicatorOven power indicator
Temperature / Time Display
Oven Features
Shelf positions
Oven Functions
Top heat and heating elements
Oven shelf runners, removable
Temperature/Time selection
Function buttons
Oven lighting
Fan heating element
Fan
Bottom heat
8
Oven Accessories
Combination shelf
For dishes, cake tins, items for
roasting and grilling.
Baking Shelf
For baking or for collecting fat
Grill pan with handle
Support for the grill tray as a collecting vessel for fat
Grill tray
Insert for the grill pan for grilling
smaller amounts of food
9
Before using for the first time
Setting and changing the current time
3The oven only operates when the time has been set.
When the appliance has been connected to the electrical supply or
when there has been a power cut,
the function indicator Time
flashes automatically.
1. To change a time that has already
been set, press the Select button
repeatedly until the function indicator Time flashes.
2. Using the / control knob, set
the current time.
After approx. 5 seconds, the clock
stops flashing and the clock displays
the time of day set.
The appliance is now ready to use.
3The time can only be modified, if
the child safety device is deactivated, neither of the Countdown ,
Cook time or End time clock
functions and no oven function is
set.
10
Initial Cleaning
Before using the oven for the first time you should clean it thoroughly.
1 Caution: Do not use any caustic, abrasive cleaners! The surface could
be damaged.
3To clean any metal front panels use commercially available cleaning
agents.
1. Turn the oven function switch to oven lighting.
2. Remove all accessories and the shelf support rails and wash them with
warm water and washing up liquid.
3. Then wash out the oven with warm water and washing-up liquid and
dry.
4. Wipe the front of the appliance with a damp cloth.
11
Operating the Oven
Switching the Oven On and Off
Oven power indicatorOven power indicator
Oven FunctionsTemperature/Time selection
Temperature / Time Display
Change display
Heat indicatorSpeedcook
12
Switching the oven on
Turn the oven functions control
knob to the desired function. The
oven power indicator lights up. The
temperature display shows the suggested temperature for the oven
function selected.
The oven starts to heat up.
When the temperature set is
reached, an audible signal sounds.
Changing the oven
temperature
Use the / control knob to raise
or lower the temperature.
The setting changes in steps of 5 °C.
Switching the oven off
To turn the oven off, turn the oven
functions dial to the OFF position.
3Cooling fan
When the oven is switched on, the fan comes on automatically to keep
the surfaces of the appliance cool. When the oven is switched off, the
fan continues to operate to cool the appliance down, then switches itself off.
13
3Heat indicator
Indicates warming up
When the oven function has been
switched on the bars that slowly
light up one after the other indicate
how far the oven has heated up.
Fast heat indicator
When the fast heat function has
been switched on the bars that
flash one after the other indicate
that fast heat is operating. In addition the bars next to the
symbol light up.
Residual heat indicator
When the oven has been switched
off, the bars that are still lit indicate
the remaining residual heat in the
oven.
14
Speedcook
After an oven function is selected, with the use of the additional
function Speedcook the empty oven can be pre-heated in a relatively
short time.
1 Important: Do not put the food to be cooked into the oven, until
Speedcook is completed and the oven is operating using the desired
function.
1. Set the desired oven function (e. g. Conventional Cooking). If neces-
sary, change the suggested temperature.
2. Press the Speedcook button. The bars next to the symbol light
up.
When the bars flash one after another it shows that Speedcook is operating.
When the temperature set is reached, the bars of the heat indicator
light up and the bars next to the symbol go out. An audible signal sounds.
The oven now continues heating according to the pre-set oven function and temperature. You can now place the food in the oven.
3The Speedcook function can be switched on with the oven functions
Ventitherm ® Precision Fan Cooking, Pizza Setting, Conventional
Cooking and Rotitherm Roasting.
15
Oven Functions
The oven has the following functions:
Oven functionUse
Oven Light With this function you can light
Full Width Dual
Grill
Conventional
Cooking
Ventitherm ®
Precision
Fan Cooking
Rotitherm
Roasting
Pizza SettingFor baking on up to two oven
Fan Controlled
Defrosting
Pyroluxe ®
Cleaning
up the oven interior, e.g. for
cleaning.
For grilling flat food items in large quantities and for toasting.
For baking and roasting on one oven level.
For baking on up to three oven levels at the same time.
Set the oven temperatures 20-40
°C lower than when using Conventional.
For roasting larger joints of meat
or poultry on one oven shelf.
The function is also suitable for
browning and gratinating.
levels.
Set the oven temperatures 20-40
°C lower than when using Conventional.
For defrosting e. g. gateaux and
flans, butter, bread, fruit or other
frozen foods.
For automatic pyrolytic cleaning
of the oven. It burns off residues
in the oven, which can then be removed with a cloth when the
oven has cooled down. The oven is
heated to approx. 500 °C.
Heating element/
fan
---
Grill, top heat
Top heat, bottom
heat
Top heat, bottom
heat, rear wall
heating element,
fan
Grill, top heat, fan
Top heat, bottomheat, fan
Fan
Top heat,
bottomheat, fan
16
Inserting the shelf and roasting pan
3Anti-tip device
All insertable components have a small curved indentation on their left
and right edges. This indentation serves as an anti-tip device and must
always point towards the back of the oven.
Inserting roasting pan:
The anti-tip device must point to-
wards the back of the oven.
Inserting the shelf:
Insert the shelf so that the two
guide bars point upwards. The antitip device must point downwards
and be at the back of the oven interior.
Inserting the shelf and the roasting pan:
When using the shelf and the roasting pan together, insert the shelf’s
anti-tip device exactly into the indentations in the tray.
17
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.