Aeg AGS88800F1 User Manual

Page 1
EN User Manual
Freezer
AGS88800F1
Page 2
www.aeg.com
2

CONTENTS

1. SAFETY INFORMATION.............................................................................................2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. OPERATION.................................................................................................................5
4. DAILY USE....................................................................................................................7
5. HINTS AND TIPS..........................................................................................................8
6. CARE AND CLEANING...............................................................................................9
7. TROUBLESHOOTING............................................................................................... 10
8. INSTALLATION..........................................................................................................13
9. TECHNICAL DATA.................................................................................................... 14
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

SAFETY INFORMATION

1.
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or
Page 3
ENGLISH
usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of
it appropriately.

1.2 General Safety

This appliance is intended to be used in household
and similar applications such as:
Farm houses; staff kitchen areas in shops, offices
and other working environments
By clients in hotels, motels, bed and breakfast and
other residential type environments
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
3
Page 4
www.aeg.com
4
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging and the transit bolts.
• Do not install or use a damaged appliance.
• Follow the installation instruction supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
• Wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
• Do not install the appliance close to radiators or cookers, oven or hobs.
• The rear of the appliance must stand against the wall.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too colds, such as the construction appendices, garages or wine cellars.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.

2.2 Electrical connection

WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

2.3 Use

WARNING!
Risk of injury, burns, electrical shock or fire.
• Do not change the specification of this appliance.
• Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable.
• If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items to touch the plastic parts of the appliance.
Page 5
56 4 3 2
1
ENGLISH 5
• Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
• Do not store flammable gas and liquid in the appliance.
• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Do not touch the compressor or the condenser. They are hot.
• Do not remove or touch items from the freezer compartment if your hands are wet or damp.
• Do not freeze again food that has been thawed.
• Obey the storage instructions on the packaging of frozen food.

2.4 Care and cleaning

WARNING!
Risk of injury or damage to the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

2.5 Disposal

WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.

3. OPERATION

3.1 Control panel

Display
1
Temperature warmer button
2
Temperature colder button
3
OK button
4
It is possible to change predefined sound of buttons by pressing together
Mode button
5
ON/OFF button
6
Mode button and Temperature colder button for some seconds. Change is reversible.
Page 6
A B C
F E D
6
www.aeg.com

3.2 Display

A. Timer indicator B. FROSTMATIC function C. Temperature indicator D. Alarm indicator E. ChildLock function F. MinuteMinder function

3.3 Switching on

Connect the mains plug to the power socket.
Press the appliance ON/OFF button if the display is off. The alarm buzzer could operate after few seconds. The temperature indicators show the set default temperature. To reset the alarm refer to "High temperature alarm".
To select a different set temperature refer to "Temperature regulation".
If DEMO appears on the display, refer to "Troubleshooting".
If the door remains open for some minutes, the light will turn off automatically. The light is reset by closing and opening the door itself.

3.4 Switching off

Press the appliance ON/OFF for 5 seconds. The display switches off. To disconnect the appliance from the power, disconnect the mains plug from the power socket.

3.5 Temperature regulation

The set temperature of the freezer may be adjusted by pressing the temperature button. Default temperature:
• -18°C for the freezer The temperature indicator shows the set temperature.
The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored.

3.6 FROSTMATIC function

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.
1. To activate this function press the
Mode button until the corresponding icon appears.
The FROSTMATIC indicator flashes.
2. Press the OK button to confirm. TheFROSTMATIC indicator is shown. This function stops automatically after 52 hours.
To switch off the function before its automatic end repeat the procedure until the FROSTMATIC indicator turns off.

3.7 ChildLock function

Activate the ChildLock function to lock the buttons from unintentional operation.
1. Press Mode button until the
corresponding icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm. The ChildLock indicator is shown. To deactivate the ChildLock function, repeat the procedure until the ChildLock indicator goes off.

3.8 MinuteMinder function

The MinuteMinder function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down food products for a certain period of time.
It is also useful when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling.
Page 7
ENGLISH 7
1. Press Mode until the corresponding
icon appears. The MinuteMinder indicator flashes. The Timer shows the set value (30 minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm. TheMinuteMinder indicator is shown. The Timer start to flash (min). At the end of the countdown the MinuteMinder indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function.
To switch off the function repeat the procedure until the MinuteMinder goes off.
It is possible to change the time at any time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button.

3.9 Door open alarm

An acoustic alarm will sound if the door is left open for a few minutes. The door open alarm conditions are indicated by:
• a flashing Alarm indicator;
• an acoustic buzzer. When normal conditions are restored (door closed), the alarm will stop. The buzzer can also be switched off by pressing any button.

3.10 High temperature alarm

An increase in the temperature in the freezer compartment (for example due to an earlier power failure) is indicated by:
• flashing of the alarm and freezer temperature indicators;
• sounding of the buzzer.
Press any button to reset the alarm. The buzzer switches off. The freezer temperature indicator shows the highest temperature reached for a few seconds. Then show again the set temperature. The alarm indicator continues to flash until the normal conditions are restored.

4. DAILY USE

WARNING!
Refer to Safety chapters.

4.1 Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
To freeze fresh food activate the FROSTMATIC function and place the food to be frozen in the freezer compartment.
Place the fresh food to be frozen in the two top compartments.
The maximum amount of food that can be frozen in 24 hours is specified on the rating plate, a label located on the inside of the appliance.
The freezing process lasts 24 hours: during this period do not add other food to be frozen.
When the freezing process is completed, return to the required temperature (see "FROSTMATIC Function").

4.2 Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours with the FROSTMATIC function turned on.
Page 8
8
www.aeg.com
In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical data chart under "Rising time", the defrosted food must be consumed quickly or cooked immediately and then re­frozen (after cooling).

4.3 Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.

5. HINTS AND TIPS

5.1 Normal operating sounds

The following sounds are normal during operation:
• A faint gurgling and bubbling sound from coils sound when refrigerant is pumped.
• A whirring and pulsating sound from the compressor when refrigerant is pumped.
• A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon).
• A faint click noise from the temperature regulator when the compressor switches on or off.

5.2 Hints for energy saving

• Do not open the door frequently or leave it open longer than absolutely necessary.

5.3 Hints for freezing

To help you make the most of the freezing process, here are some important hints:
• the maximum quantity of food which can be frozen in 24 hours is shown on the rating plate;
Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.

4.4 Ice-cube production

This appliance is equipped with one or more trays for the production of ice­cubes.
Do not use metallic instruments to remove the trays from the freezer.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.
• the freezing process takes 24 hours no further food to be frozen should be added during this period;
• freeze only top quality, fresh and thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required;
• wrap up the food in aluminium foil or polythene and make sure that the packages are airtight;
• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in temperature of the latter;
• lean foods store better and longer than fatty ones; salt reduces the storage life of food;
• water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.
Page 9
ENGLISH
9
5.4 Hints for storage of frozen
food
To obtain the best performance from this appliance, you should:
• make sure that the commercially frozen foodstuffs were adequately stored by the retailer;
• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the shortest possible time;

6. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

6.1 General warnings

CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
The accessories and parts of the appliance are not suitable for washing in a dishwasher.

6.2 Cleaning the interior

Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand­new product, then dried thoroughly.
CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
• not open the door frequently or leave it open longer than absolutely necessary;
• once defrosted, food deteriorates rapidly and cannot be refrozen;
• do not exceed the storage period indicated by the food manufacturer.

6.3 Periodic cleaning

CAUTION!
Do not pull, move or damage any pipes and/or cables inside the cabinet.
CAUTION!
Take care of not to damage the cooling system.
CAUTION!
When moving the cabinet, lift it by the front edge to avoid scratching the floor.
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save electricity consumption.
Page 10
www.aeg.com10

6.4 Defrosting the freezer

CAUTION!
Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. A temperature rise of the frozen food packs, during defrosting, may shorten their safe storage life.
About 12 hours prior to defrosting, set a lower temperature, in order to build up sufficient chill reserve for the interruption in operation.
A certain amount of frost will always form on the freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.
1. Switch off the appliance, or pull out
electrical plug from the wall socket.
2. Remove any stored food, wrap it in
several layers of newspaper and put it in a cool place.
WARNING!
Do not touch frozen goods with wet hands. Hands can freeze to the goods.
3. Leave the door open.
In order to speed up the defrosting process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that break away before defrosting is complete.
4. When defrosting is completed, dry
the interior thoroughly.
5. Switch on the appliance. After three hours reload the previously removed food into the freezer compartment.

6.5 Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Defrost (if necessary) and clean the
appliance and all accessories.
4. Leave the door/doors open to
prevent unpleasant smells.
WARNING!
If you want to keep the appliance switched on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

7. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Solution
The appliance does not op­erate.
The appliance is switched off.
Switch on the appliance.
Page 11
Problem Possible cause Solution
The mains plug is not con-
nected to the mains socket
Connect the mains plug to the mains socket correctly.
correctly.
There is no voltage in the
mains socket.
Connect a different electrical appliance to the mains sock­et. Contact a qualified elec­trician.
The appliance is noisy. The appliance is not suppor-
ted properly.
Audible or visual alarm is on. The cabinet has been re-
cently switched on.
Check if the appliance stands stable.
Refer to "Door Open Alarm"or "High Tempera­ture Alarm".
The temperature in the ap­pliance is too high.
Refer to "Door Open Alarm"or "High Tempera­ture Alarm".
The door is left open. Close the door.
A rectangular symbol is shown instead of numbers on the Temperature Display.
Temperature sensor prob­lem.
Contact the nearest Author­ized Service Centre (the cooling system will continue to keep food products cold, but temperature adjustment will not be possible).
The compressor operates continually.
Many food products to be
The room temperature is too
Food products placed in the
Temperature is set incorrect­ly.
frozen were put in at the same time.
high.
appliance were too warm.
Refer to "Operation" chap­ter.
Wait a few hours and then check the temperature again.
Refer to climate class chart on the rating plate.
Allow food products to cool to room temperature before storing.
The door is not closed cor-
Refer to "Closing the door".
rectly.
There is too much frost and ice.
The FROSTMATIC function is switched on.
The door is not closed cor­rectly or the gasket is de-
Refer to "FROSTMATIC function".
Refer to "Closing the door".
formed/dirty.
ENGLISH 11
Page 12
www.aeg.com12
Problem Possible cause Solution
The water drainage plug is not correctly positioned.
Food products are not wrap­ped properly.
Temperature is set incorrect­ly.
The compressor does not start immediately after
This is normal, no error has
occurred. pressing the FROSTMATIC, or after changing the tem­perature.
Temperature cannot be set. The FROSTMATIC function
is switched on.
DEMO appears on the dis­play.
The temperature in the ap­pliance is too low/too high.
The appliance is in demon-
stration mode.
The temperature regulator is
not set correctly.
The door is not closed cor-
rectly.
The food products' tempera-
ture is too high.
Many food products are
stored at the same time.
The thickness of the frost is
greater than 4-5 mm.
The door has been opened
often.
The FROSTMATIC function
is switched on.
There is no cold air circula-
tion in the appliance.
Position the water drainage plug in the correct way.
Wrap the food products bet­ter.
Refer to "Operation" chap­ter.
The compressor starts after a period of time.
Switch off FROSTMATIC manually, or wait until the function resets automatically to set the temperature. Refer to "FROSTMATIC function"
Keep the OK button pressed for approximately 10 sec­onds until a long sound is heard and display shuts off for a short time.
Set a higher/lower tempera­ture.
Refer to "Closing the door".
Let the food products tem­perature decrease to room temperature before storage.
Store less food products at the same time.
Defrost the appliance.
Open the door only if neces­sary.
Refer to "FROSTMATIC function".
Make sure that there is cold air circulation in the appli­ance.
Page 13
Problem Possible cause Solution
5 cm
min. 200 cm
2
min. 200 cm
2
Door does not open easily. You attempted to re-open
the door immediately after closing.
Wait a few seconds between closing and re-opening of the door.
ENGLISH
13
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

7.2 Closing the door

1. Clean the door gaskets.

8. INSTALLATION

WARNING!
Refer to Safety chapters.

8.1 Location

Refer to the assembly instructions for the installation.
To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet.

8.2 Positioning

Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised Service Centre.
Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.

8.3 Ventilation requirements

The airflow behind the appliance must be sufficient.
Climate class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Ambient temperature
Page 14
A B
C
D E
www.aeg.com14

8.4 Electrical Connection

CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following code:
A - green and yellow: Earth
C - brown: Live
D - blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with the letter “E“ or by the earth
symbol yellow.
2. Connect the wire coloured blue to
the terminal either marked with the letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the “L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
5. Switch on the appliance. The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
or coloured green and
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

9. TECHNICAL DATA

9.1 Technical data

Height mm 873
Width mm 556
Depth mm 549
Rising time Hours 20
Voltage Volts 230 - 240
Frequency Hz 50
Page 15
ENGLISH
15
The technical information is situated in the rating plate, on the external or
internal side of the appliance and in the energy label.
10. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances
marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
*
Page 16
www.aeg.com/shop
211623091-B-422016
Loading...