Aeg ABE6882VLS, 933 033 726 User Manual

USER MANUAL
ABE6882VLS
EN User Manual
Freezer
www.aeg.com
2

CONTENTS

1. SAFETY INFORMATION.............................................................................................2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. INSTALLATION............................................................................................................6
4. OPERATION.................................................................................................................7
5. DAILY USE....................................................................................................................8
6. HINTS AND TIPS..........................................................................................................9
7. CARE AND CLEANING.............................................................................................10
8. TROUBLESHOOTING............................................................................................... 11
9. TECHNICAL DATA.................................................................................................... 14
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler - features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

SAFETY INFORMATION

1.
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
ENGLISH

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
This appliance may be used by children between 3
and 8 years of age and persons with very extensive and complex disabilities, if they have been properly instructed.
Children of less than 3 years of age should be kept
away from the appliance unless continuously supervised.
Do not let children play with the appliance.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of
it appropriately.
3
1.2

General Safety

This appliance is intended to be used in household and similar applications such as:
Farm houses; staff kitchen areas in shops, offices
and other working environments
By clients in hotels, motels, bed and breakfast and
other residential type environments
WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless
www.aeg.com
4
they are of the type recommended by the
manufacturer.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the built-in structure.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
• At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
• Do not install the appliance close to radiators or cookers, ovens or hobs.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too cold.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.

2.2 Electrical connection

WARNING!
Risk of fire and electric shock.
WARNING!
When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING!
Do not use multi-plug adapters and extension cables.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
ENGLISH
5
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

2.3 Use

WARNING!
Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
• Do not change the specification of
this appliance.
• Do not put electrical appliances (e.g.
ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• If damage occurs to the refrigerant
circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items to touch the
plastic parts of the appliance.
• Do not put soft drinks in the freezer
compartment. This will create pressure on the drink container.
• Do not store flammable gas and
liquid in the appliance.
• Do not put flammable products or
items that are wet with flammable products in, near or on the appliance.
• Do not touch the compressor or the
condenser. They are hot.
• Do not remove or touch items from
the freezer compartment if your hands are wet or damp.
• Do not freeze again food that has
been thawed.
• Follow the storage instructions on the
packaging of frozen food.
• Wrap the food in any food contact material before putting it in the freezer compartment.

2.4 Care and cleaning

WARNING!
Risk of injury or damage to the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

2.5 Service

• To repair the appliance contact the Authorised Service Centre.
• Use original spare parts only.

2.6 Disposal

WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.
A B
C
D E
www.aeg.com
6

3. INSTALLATION

WARNING!
Refer to Safety chapters.

3.1 Location

Refer to the assembly instructions for the installation.
To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet.

3.2 Positioning

Install the appliance in a dry, well ventilated indoors where the ambient temperature corresponds to the climate class indicated on the rating plate of the appliance.
Climate class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Ambient temperature

3.3 Electrical Connection

CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following code:
Some functional problems might occur for some types of models when operating outside of that range. The correct operation can only be guaranteed within the specified temperature range. If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
A - green and yellow: Earth
C - brown: Live
D - blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with the letter “E“ or by the earth
symbol or coloured green and yellow.
2. Connect the wire coloured blue to
the terminal either marked with the letter “N“ or coloured black.
3. Connect the wire coloured brown to
5 cm
min. 200 cm
2
min. 200 cm
2
1 2 3 4 5
the terminal either marked with the “L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
5. Switch on the appliance. The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

3.4 Ventilation requirements

The airflow behind the appliance must be sufficient.

4. OPERATION

ENGLISH 7
CAUTION!
Refer to the assembly instructions for the installation.

4.1 Control panel

Power indicator light
1
Temperature regulator
2
FROSTMATIC light
3
FROSTMATIC switch and alarm reset
4
switch

4.2 Switching on

Connect the appliance to the main power supply.
Alarm light
5
1. Turn the Temperature regulator
clockwise to a medium setting. The power indicator light will light up and a sound will signal for 2 seconds.
www.aeg.com8
If the temperature inside the appliance is too high, the Alarm light will blink and the sound signal alarm will turn on.
2. Push the FROSTMATIC switch and
the sound signal alarm will get off.
3. Push the FROSTMATIC switch once
again and the FROSTMATIC light will light up. The appliance will start to operate.

4.3 Switching off

Turn the Temperature regulator to the "O" position and a sound is on only for 2 seconds . The power indicator light will switch off.

4.4 Temperature regulation

The temperature is regulated automatically.
1. Turn the Temperature regulator
toward lower settings to obtain the minimum coldness.
2. Turn the Temperature regulator
toward higher settings to obtain the maximum coldness.
A medium setting is generally the most suitable. However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on:
• room temperature,
• how often the door is opened,
• the quantity of food stored,
• the location of the appliance.

4.5 FROSTMATIC function

The FROSTMATIC function accelerates the freezing of fresh food and, at the same time, protects foodstuffs already stored from undesirable warming.
To activate this function press the FROSTMATIC button. The FROSTMATIC indicator appears. This function stops automatically after 52 hours.
You can deactivate the FROSTMATIC function before its automatic end by pressing the FROSTMATIC button again. The FROSTMATIC indicator will turn off.
The function switches off by selecting a different set temperature.

4.6 High temperature alarm

If the temperature inside the freezer has risen to a point where the safe storage of frozen food is no longer ensured (for example due to a power failure), the Alarm light will blink and an acoustic alarm will sound.
When the freezer is first switched on, the Alarm light blinks until the temperature has dropped to a safe level for the storage of frozen food.
1. Switch off the warning tone by
pressing the FROSTMATIC switch. The FROSTMATIC indicator appears. The Alarm light blinks until the required temperature has been reached again.
2. Release the FROSTMATIC switch as
soon as the Alarm light is off. The FROSTMATIC indicator turns off.
5.

DAILY USE

5.1 Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-frozen food for a long time.
WARNING!
Refer to Safety chapters.
To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing the food to be frozen in the freezer compartment.
Place the fresh food to be frozen in the two bottom compartments.
ENGLISH
9
The maximum amount of food that can be frozen in 24 hours is specified on the rating plate, a label located on the inside of the appliance.
The freezing process lasts 24 hours, during this period do not add other food to be frozen.
When the freezing process is completed, you can restore previously set temperature (see "FROSTMATIC function").

5.2 Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run at least 2 hours with the FROSTMATIC function turned on.
In the event of accidental defrosting, for example due to a power failure, if the power has been off for longer that the value shown in the technical data chart under "Rising time", the defrosted food must be consumed quickly or cooked immediately and then re­frozen (after cooling).

5.3 Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compartment or at room temperature, depending on the time available for this operation.
Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer.

5.4 Ice-cube production

This appliance is equipped with one or more trays for the production of ice­cubes.
Do not use metallic instruments to remove the trays from the freezer.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.

6. HINTS AND TIPS

6.1 Normal operating sounds

The following sounds are normal during operation:
• A faint gurgling and bubbling sound from coils sound when refrigerant is pumped.
• A whirring and pulsating sound from the compressor when refrigerant is pumped.
• A sudden cracking noise from inside appliance caused by thermic dilatation (a natural and not dangerous physical phenomenon).
• A faint click noise from the temperature regulator when the compressor switches on or off.

6.2 Hints for energy saving

• Do not open the door frequently or leave it open longer than absolutely necessary.

6.3 Hints for freezing

• Freeze only top quality, fresh and thoroughly cleaned food products.
• For more efficient freezing and thawing divide food into small portions.
• Wrap the food in aluminium foil or polythene. Make sure that the packages are airtight.
• To avoid increase in temperature of already frozen food, do not place fresh unfrozen food directly next to it.
• Lean foods store better and longer than fatty ones. Salt reduces the storage life of food.
10
www.aeg.com
• Do not eat ice cubes, water ices or ice lollies immediately after taking them out of the freezer. Risk of frostbites.
• It is advisable to show the freezing date on each individual pack to enable you to keep tab of the storage time.
6.4 Hints for storage of frozen
food
• Make sure that the commercially frozen food products were adequately stored by the retailer.

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

7.1 General warnings

CAUTION!
Unplug the appliance before carrying out any maintenance operation.
This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
The accessories and parts of the appliance are not suitable for washing in a dishwasher.

7.2 Cleaning the interior

Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand­new product, then dried thoroughly.
CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
• Make sure that frozen foodstuffs are transferred from the food store to the freezer in the shortest possible time.
• Once defrosted, food deteriorates rapidly and cannot be refrozen.
• Do not exceed the storage period indicated by the food manufacturer.

7.3 Periodic cleaning

CAUTION!
Do not pull, move or damage any pipes and/or cables inside the appliance.
CAUTION!
Do not damage the cooling system.
The equipment has to be cleaned regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral soap.
2. Regularly check the door seals and
wipe them clean to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of the appliance with a brush. This will improve the performance of the appliance and save electricity consumption.
ENGLISH 11

7.4 Defrosting of the freezer

CAUTION!
Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer.
About 12 hours prior to defrosting set a lower temperature in order to build up sufficient chill reserve in case of any interruption in operation.
A certain amount of frost will always form on the freezer shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.
1. Switch off the appliance or pull out
electrical plug from the wall socket.
2. Remove any stored food, wrap it in
several layers of newspaper and put it in a cool place.
CAUTION!
A temperature rise of the frozen food packs during defrosting may shorten their safe storage life. Do not touch frozen goods with wet hands. Hands can freeze to the goods.
3. Leave the door open. Protect the
floor from the defrosting water e.g. with a cloth or a flat vessel.
4. In order to speed up the defrosting
process, place a pot of warm water in the freezer compartment. In addition, remove pieces of ice that break away before defrosting is complete. Use the supplied ice scraper for this purpose.
5. When defrosting is complete, dry the
interior thoroughly. Keep the ice scraper for the future use.
6. Switch on the appliance and close
the door.
7. Set the temperature regulator to
obtain the maximum coldness and run the appliance for two or three
hours using this setting. Only after this time put the food back into the freezer compartment.

7.5 Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Defrost the appliance (if necessary).
4. Clean the appliance and all
accessories.
5. Leave the door/doors open to
prevent unpleasant smells.
CAUTION!
If you want to keep the appliance switched on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
www.aeg.com12

8.1 What to do if...

Problem Possible cause Solution
The appliance does not op­erate.
The mains plug is not con-
There is no voltage in the
The appliance is noisy. The appliance is not suppor-
Audible or visual alarm is on. The cabinet has been re-
Power indicator light is flash­ing.
The compressor operates continually.
Many food products to be
The room temperature is too
Food products placed in the
The appliance is switched off.
nected to the mains socket correctly.
mains socket.
ted properly.
cently switched on.
The temperature in the ap­pliance is too high.
An error has occurred in measuring the temperature.
The appliance is not working properly.
The temperature in the ap­pliance is too high.
Temperature is set incorrect­ly.
frozen were put in at the same time.
high.
appliance were too warm.
The door is not closed cor­rectly.
Switch on the appliance.
Connect the mains plug to the mains socket correctly.
Connect a different electrical appliance to the mains sock­et. Contact a qualified elec­trician.
Check if the appliance stands stable.
Refer to "Door Open Alarm"or "High Tempera­ture Alarm".
Refer to "Door Open Alarm"or "High Tempera­ture Alarm".
Contact a qualified electri­cian or contact the nearest Authorized Service Centre.
Contact a qualified electri­cian or contact the nearest Authorized Service Centre.
Contact a qualified electri­cian or contact the nearest Authorized Service Centre.
Refer to "Operation" chap­ter.
Wait a few hours and then check the temperature again.
Refer to climate class chart on the rating plate.
Allow food products to cool to room temperature before storing.
Refer to "Closing the door".
Problem Possible cause Solution
There is too much frost and ice.
The FROSTMATIC function is switched on.
The door is not closed cor­rectly or the gasket is de-
Refer to "FROSTMATIC function".
Refer to "Closing the door".
formed/dirty.
The compressor does not start immediately after
The water drainage plug is not correctly positioned.
Food products are not wrap­ped properly.
Temperature is set incorrect­ly.
This is normal, no error has occurred.
Position the water drainage plug in the correct way.
Wrap the food products bet­ter.
Refer to "Operation" chap­ter.
The compressor starts after a
period of time. pressing the FROSTMATIC, or after changing the tem­perature.
Temperature cannot be set. The FROSTMATIC function
is switched on.
Switch off FROSTMATIC
manually, or wait until the
function resets automatically
to set the temperature. Refer
to "FROSTMATIC function"
The temperature in the ap­pliance is too low/too high.
The door is not closed cor-
The temperature regulator is not set correctly.
Set a higher/lower tempera-
ture.
Refer to "Closing the door".
rectly.
The food products' tempera-
ture is too high.
Let the food products tem-
perature decrease to room
temperature before storage.
Many food products are
stored at the same time.
The thickness of the frost is
Store less food products at
the same time.
Defrost the appliance.
greater than 4-5 mm.
The door has been opened
often.
The FROSTMATIC function is switched on.
There is no cold air circula­tion in the appliance.
Open the door only if neces-
sary.
Refer to "FROSTMATIC
function".
Make sure that there is cold
air circulation in the appli-
ance.
ENGLISH 13
14
www.aeg.com
Problem Possible cause Solution
Door does not open easily. You attempted to re-open
the door immediately after closing.
Wait a few seconds between closing and re-opening of the door.
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.
2. If necessary, adjust the door. Refer to
assembly instructions.
3. If necessary, replace the defective
door gaskets. Contact the Authorised Service Centre.

8.2 Closing the door

1. Clean the door gaskets.

9. TECHNICAL DATA

9.1 Technical data

Dimensions of the re­cess
Height 873 mm
Width 540 mm
Depth 550 mm
Voltage 230 - 240 V
Frequency 50 Hz
Rising time 20 h
The technical information is situated in the rating plate, on the external or internal side of the appliance and on the energy label.
10. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
*
ENGLISH 15
www.aeg.com/shop
211625568-A-032020
Loading...