Before the installation and use of the appliance, carefully read
the supplied instructions. The manufacturer is not responsible
for any injuries or damage that are the result of incorrect
installation or usage. Always keep the instructions in a safe
and accessible location for future reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
the use of the appliance in a safe way and understand the
hazards involved. Children of less than 8 years of age and
persons with very extensive and complex disabilities shall
be kept away from the appliance unless continuously
supervised.
• Children should be supervised to ensure that they do not
play with the appliance and mobile devices with My AEG
Kitchen .
• Keep all packaging away from children and dispose of it
appropriately.
• WARNING: The appliance and its accessible parts become
hot during use. Keep children and pets away from the
appliance when in use and when cooling down.
• If the appliance has a child safety device, it should be
activated.
• Children shall not carry out cleaning and user maintenance
of the appliance without supervision.
1.2 General Safety
• This appliance is for cooking purposes only.
• This appliance is designed for single household domestic
use in an indoor environment.
4ENGLISH
• This appliance may be used in, offices, hotel guest rooms,
bed & breakfast guest rooms, farm guest houses and other
similar accommodation where such use does not exceed
(average) domestic usage levels.
• Only a qualified person must install this appliance and
replace the cable.
• Do not use the appliance before installing it in the built-in
structure.
• Disconnect the appliance from the power supply before
carrying out any maintenance.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons to avoid an electrical hazard.
• The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
• WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
• WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements or the surface of the appliance cavity.
• Always use oven gloves to remove or insert accessories or
ovenware.
• Use only the food sensor (core temperature sensor)
recommended for this appliance.
• To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
• Before pyrolytic cleaning, remove all accessories and
excessive deposits/spills from the appliance cavity.
ENGLISH5
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions supplied
with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable
place that meets installation requirements.
• Keep the minimum distance from other
appliances and units.
• Before mounting the appliance, check if
the appliance door opens without restraint.
• The appliance is equipped with an electric
cooling system. It must be operated with
the electric power supply.
• The built-in unit must meet the stability
requirements of DIN 68930.
Cabinet minimum height
(Cabinet under the worktop
minimum height)
Cabinet width560 mm
Cabinet depth550 (550) mm
Height of the front of the
appliance
Height of the back of the
appliance
Width of the front of the ap‐
pliance
Width of the back of the ap‐
pliance
Depth of the appliance567 mm
Built in depth of the appli‐
ance
Depth with open door1027 mm
578 (600) mm
594 mm
576 mm
595 mm
559 mm
546 mm
Ventilation opening mini‐
mum size. Opening placed
on the bottom rear side
Mounting screws4x25 mm
560x20 mm
2.2 Electrical connection
WARNING!
Risk of fire and electric shock.
• All electrical connections should be made
by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
• Do not let mains cables touch or come
near the appliance door or the niche below
the appliance, especially when it operates
or the door is hot.
• The shock protection of live and insulated
parts must be fastened in such a way that
it cannot be removed without tools.
• Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
6ENGLISH
The isolation device must have a contact
opening width of minimum 3 mm.
• Fully close the appliance door before you
connect the mains plug to the mains
socket.
• This appliance is supplied without a main
plug and a main cable.
2.3 Use
WARNING!
Risk of injury, burns and electric shock or
explosion.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended
during operation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance
door while the appliance is in operation.
Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully. The
use of ingredients with alcohol can cause
a mixture of alcohol and air.
• Do not let sparks or open flames to come
in contact with the appliance when you
open the door.
• Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
• Do not share your Wi-Fi password.
WARNING!
Risk of damage to the appliance.
• To prevent damage or discoloration to the
enamel:
– do not put ovenware or other objects
in the appliance directly on the bottom.
– do not put aluminium foil directly on
the bottom of cavity of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in
the appliance after you finish the
cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel or stainless
steel has no effect on the performance of
the appliance.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• Always cook with the appliance door
closed.
• If the appliance is installed behind a
furniture panel (e.g. a door) make sure the
door is never closed when the appliance
operates. Heat and moisture can build up
behind a closed furniture panel and cause
subsequent damage to the appliance, the
housing unit or the floor. Do not close the
furniture panel until the appliance has
cooled down completely after use.
2.4 Care and cleaning
WARNING!
Risk of injury, fire, or damage to the
appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There is
the risk that the glass panels can break.
• Replace immediately the door glass
panels when they are damaged. Contact
the Authorised Service Centre.
• Be careful when you remove the door from
the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Clean the appliance with a moist soft
cloth. Use only neutral detergents. Do not
use abrasive products, abrasive cleaning
pads, solvents or metal objects.
• If you use an oven spray, follow the safety
instructions on its packaging.
ENGLISH7
2.5 Pyrolytic cleaning
2.6 Steam Cooking
WARNING!
Risk of Injury / Fires / Chemical
Emissions (Fumes) in Pyrolytic Mode.
• Before carrying out the pyrolytic cleaning
and initial preheating remove from the
oven cavity:
– any excess food residues, oil or
grease spills / deposits.
– any removable objects (including
shelves, side rails, etc., provided with
the appliance) especially any non-stick
pots, pans, trays, utensils, etc.
• Read carefully all the instructions for
pyrolytic cleaning.
• Keep children away from the appliance
while the pyrolytic cleaning operates. The
appliance becomes very hot and hot air is
released from the front cooling vents.
• Pyrolytic cleaning is a high temperature
operation that can release fumes from
cooking residues and construction
materials, as such consumers are advised
to:
– provide good ventilation during and
after the pyrolytic cleaning.
– provide good ventilation during and
after the initial preheating.
• Do not spill or apply water on the oven
door during and after the pyrolytic cleaning
to avoid damaging the glass panels.
• Fumes released from all pyrolytic ovens /
cooking residues as described are not
harmful to humans, including children, or
persons with medical conditions.
• Keep pets away from the appliance during
and after the pyrolytic cleaning and initial
preheating. Small pets (especially birds
and reptiles) can be highly sensitive to
temperature changes and emitted fumes.
• Non-stick surfaces on pots, pans, trays,
utensils etc., can be damaged by the high
temperature pyrolytic cleaning operation of
all pyrolytic ovens and can be also a
source for low level harmful fumes.
WARNING!
Risk of burns and damage to the
appliance.
• Released Steam can cause burns:
– Be careful when you open the
appliance door when the function is
activated. Steam can release.
– Open the appliance door with care
after the steam cooking operation.
2.7 Internal lighting
WARNING!
Risk of electric shock.
• Concerning the lamp(s) inside this product
and spare part lamps sold separately:
These lamps are intended to withstand
extreme physical conditions in household
appliances, such as temperature,
vibration, humidity, or are intended to
signal information about the operational
status of the appliance. They are not
intended to be used in other applications
and are not suitable for household room
illumination.
• This product contains a light source of
energy efficiency class G.
• Use only lamps with the same
specifications.
2.8 Service
• To repair the appliance contact the
Authorised Service Centre.
• Use original spare parts only.
2.9 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to dispose of the
appliance.
• Disconnect the appliance from the mains
supply.
• Cut off the mains electrical cable close to
the appliance and dispose of it.
8ENGLISH
• Remove the door catch to prevent children
21
10
9
3
5
4
3
2
1
5
4
6
7
8
or pets from becoming trapped in the
appliance.
3. PRODUCT DESCRIPTION
3.1 General overview
3.2 Accessories
Wire shelf
For cookware, cake tins, roasts.
Control panel
Display
Water drawer
Socket for the food sensor
Heating element
Lamp
Fan
Descaling pipe outlet
Shelf support, removable
Shelf positions
Grill- / Roasting pan
To bake and roast or as a pan to collect fat.
Trivet
For roasting and grilling.
Use the trivet only with the Grill- / Roasting pan.
ENGLISH9
Food sensor
12 34
5 6
3s
To measure the temperature inside food.
Telescopic runners
For inserting and removing trays and wireshelf
more easily.
4. CONTROL PANEL
4.1 Control panel overview
ON / OFFPress and hold to turn the appliance on and off.
1
MenuLists the appliance functions.
2
FavouritesLists the favourite settings.
3
DisplayShows the current settings of the appliance.
4
Lamp switchTo turn the lamp on and off.
5
Fast Heat UpTo turn on and off the function: Fast Heat Up.
6
PressMove
Touch the surface with fingertip.Slide fingertip over the surface.Touch the surface for 3 seconds.
Press and hold
10ENGLISH
4.2 Display
150°C
12:30
15min
START
85°C
GFDE
C
AB
Display indicators
Basic indicators - to navigate on the display.
Display with key functions set.
A. Wi-Fi
B. Time of day
C. START/STOP
D. Temperature
E. Heating functions
F. Timer
G. Food sensor (selected models only)
To confirm the selection / setting.
Sound alarm function indicators - when the set time of cooking ends, the signal sounds.
The function is on.
Timer indicators
To set the function: Delayed start.
Wi-Fi indicator - the appliance can be connected to Wi-Fi.
Remote operation indicator - the appliance can be controlled remotely.
To go one level
back in the menu.
The function is on.
Cooking stops automatically.
Wi-Fi connection is turned on.
Remote operation is turned on.
To undo the last
action.
To turn the options on and off.
To cancel the setting.
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
Sound alarm is off.
ENGLISH11
5.1 Initial Cleaning
Step 1Step 2Step 3
Remove all accessories and remov‐
able shelf supports from the appli‐
ance.
Clean the appliance and the acces‐
sories only with a microfibre cloth,
warm water and a mild detergent.
Place the accessories and the re‐
movable shelf supports in the appli‐
ance.
5.2 First connection
The display shows welcome message after the first connection.
You have to set: Language, Display brightness, Key tones, Buzzer volume, Water hardness,
Time of day.
5.3 Wireless connection
To connect the appliance you need:
• Wireless network with the Internet connection.
• Mobile device connected to the same wireless network.
Step 1To download My AEG Kitchen app: Scan the QR code on the rating plate with the camera on your
Step 2Follow the app onboarding instructions.
Step 3Turn on the appliance.
Step 4
Step 5
Step 6The appliance wireless module starts within 90 sec.
Frequency2.4 GHz WLAN
ProtocolIEEE 802.11b DSSS, 802.11g/n OFDM
Max PowerEIRP < 20 dBm (100 mW)
Wi-Fi moduleNIUS-50
mobile device to be redirected to AEG Homepage. The rating plate is on the front frame of the ap‐
pliance cavity. You can also download the app directly from the app store.
Press: . Select: Settings / Connections.
- slide or press to turn on: Wi-Fi.
2400 - 2483.5 MHz
United Kingdom is covered by the provision of UK SI 2017, No 1206: Radio Equipment
Regulations.
5.4 Software licences
The software in this product contains
components that are based on free and open
contributions of the open software and
robotics communities to the development
project.
source software. AEG acknowledges the
12ENGLISH
To access the source code of these free and
open source software components whose
aeg.opensoftwarerepository.com (folder
NIUS).
license conditions require publishing, and to
see their full copyright information and
applicable license terms, visit: http://
Step 1Remove all accessories and removable shelf supports from the oven.
Step 2
Step 3
The oven can emit an odour and smoke during preheating. Make sure that the room is ventilated.
Set the maximum temperature for the function: .
Let the oven operate for 1 h.
Set the maximum temperature for the function: .
Let the oven operate for 15 min.
5.5 Initial preheating
Preheat the empty oven before the first use.
5.6 How to set: Water hardness
When you connect the oven to the mains you have to set the water hardness level.
Use the test paper or contact your water supplier to check the water hardness level.
Step 1Step 2Step 3Step 4
Put the test paper into
water for about 1 sec. Do
not put the test paper un‐
der running water.
Shake the test paper to re‐
move the excess of water.
After 1 min, check water
hardness with the table
below.
Set the water hardness lev‐
el: Menu / Settings / Setup /
Water hardness.
The colours of the test paper continue to change. Do not check water hardness later than 1 min after test.
You can change the water hardness level in the menu: Settings / Setup / Water hardness.
The table shows water hardness range (dH) with the corresponding level of Calcium deposit
and the water classification. Adjust the water hardness level according to the table.
Water hardnessTest paperCalcium depos‐
LeveldH
10 - 70 - 1.30 - 50soft
28 - 141.4 - 2.551 - 100moderately hard
315 - 212.6 - 3.8101 - 150hard
4≥22≥ 3.9≥151very hard
it (mmol/l)
Calcium de‐
posit (mg/l)
Water classifi‐
cation
When the tap water hardness level is 4, fill the water drawer with still bottled water.
ENGLISH13
6. DAILY USE
WARNING!
Refer to Safety chapters.
6.1 How to set: Heating functions
Step 1Turn on the oven. The display shows the default heating function.
Step 2
Step 3
Step 4
Step 5
Step 6Turn off the oven.
6.2 How to set: Steam heating function
Press the symbol of the heating function to enter the submenu.
Select the heating function and press: . The display shows: temperature.
Set: temperature. Press: .
Press: .
Food Sensor - you can plug the sensor at any time before or during cooking.
- press to turn off the heating function.
Step 1Turn on the oven.
Step 2
Step 3
Step 4Set the temperature.
Step 5
Step 6Press the cover of the water drawer to open it.
Step 7Fill the water drawer with cold water to the maximum level (around 950 ml) until the signal sounds
Select the symbol of the heating function and press it to enter the submenu.
Press . Set the steam heating function.
Press: . The display shows the temperature settings.
Press: .
or the display shows the message. Do not fill the water drawer over its maximum capacity. There is
a risk of water leakage, overflow and furniture damage.
WARNING!
Use only cold tap water. Do not use filtered (demineralised) or distilled water.
Do not use other liquids. Do not pour flammable or alcoholic liquids into the
water drawer.
Step 8Push the water drawer to its initial position.
14ENGLISH
Step 9
Step 10When the water drawer runs out of water, the signal sounds. Refill the water drawer.
Step 11Turn off the oven.
Step 12Empty the water drawer after cooking ends.
Step 13Residual water can condensate in the cavity. After cooking, carefully open the oven door. When the
Press: .
Steam appears after approximately 2 min. When the oven reaches the set temperature, the signal
sounds.
Refer to "Care and Cleaning" chapter, Tank emptying.
oven is cold, dry the cavity with a soft cloth.
6.3 How to set: Assisted Cooking
Every dish in this submenu has a recommended function and temperature. You can adjust the
time and the temperature.
For some of the dishes you can also cook with:
• Food Sensor
The degree to which a dish is cooked:
• Rare or Less
• Medium
• Well done or More
Step 1Turn on the oven.
Step 2
Step 3
Step 4Choose a dish or a food type.
Step 5
Press: .
Press: . Enter: Assisted Cooking.
Press: .
6.4 Heating functions
STANDARD
Heating functionApplication
To grill thin pieces of food and to toast bread.
Grill
To roast large meat joints or poultry with bones on one shelf position. To make gratins
and to brown.
Turbo Grilling
To bake on up to three shelf positions at the same time and to dry food. Set the tem‐
perature 20 - 40 °C lower than for Conventional Cooking.
True Fan Cooking
ENGLISH15
Heating functionApplication
To make convenience food (e.g., french fries, potato wedges or spring rolls) crispy.
Frozen Foods
To bake and roast food on one shelf position.
Conventional Cooking
To bake pizza. To make intensive browning and a crispy bottom.
Pizza Function
To bake cakes with crispy bottom and to preserve food.
Bottom Heat
To speed up the rising of the yeast dough. It prevents dough surface from drying and
keeps the dough elastic.
Dough Proving
SPECIALS
Heating functionApplication
To preserve vegetables (e.g., pickles).
Preserving
To dry sliced fruit, vegetables and mushrooms.
Dehydrating
Plate Warming
Defrost
Au Gratin
Slow Cooking
16ENGLISH
To preheat plates for serving.
To defrost food (vegetables and fruit). The defrosting time depends on the amount
and size of the frozen food.
For dishes such as lasagna or potato gratin. To make gratins and to brown.
To prepare tender, succulent roasts.
Heating functionApplication
To keep food warm.
Keep Warm
This function is designed to save energy during cooking. When you use this function,
the temperature in the cavity may differ from the set temperature. The residual heat is
Moist Fan Baking
used. The heating power may be reduced. For more information refer to "Daily Use"
chapter, Notes on: Moist Fan Baking.
STEAM
Heating functionApplication
Food reheating with steam prevents surface drying. Heat is distributed in a gentle and
even way, which allows to recover taste and aroma of food as just prepared. This
Steam Regenerating
Bread Baking
Humidity Low
function can be used to reheat food directly on a plate. You can reheat more than one
plate at the same time, using different shelf positions.
Use this function to prepare bread and bread rolls with a very good professional-like
result in terms of crispiness, colour and crust gloss.
The function is suitable for meat, poultry, oven dishes and casseroles. Thanks to the
combination of steam and heat, meat gets a tender and juicy texture along with a
crusty surface.
6.5 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements (according to EU 65/2014 and
EU 66/2014). Tests according to:
For EU: IEC/EN 60350-1
For UK: BS EN 60350-1
The oven door should be closed during
and the oven operates with the highest
energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
cooking so that the function is not interrupted
7. CLOCK FUNCTIONS
7.1 Clock functions description
Clock functionApplication
Cooking timeTo set the length of cooking. Maximum is 23 h 59 min.
End actionTo set what happens when the timer ends counting.
Delayed startTo postpone the start and / or end of cooking.
ENGLISH17
Clock functionApplication
Time extensionTo extend cooking time.
ReminderTo set a countdown. Maximum is 23 h 59 min. This function has no effect on the
UptimerMonitors how long the function operates. Uptimer - you can turn it on and off.
operation of the appliance.
7.2 How to set: Clock functions
How to set the clock
Step 1Turn on the oven.
Step 2Press: Time of day.
Step 3
How to set cooking time
Step 1Choose the heating function and set the temperature.
Step 2
Step 3
How to choose end option
Step 1Choose the heating function and set the temperature.
Step 2
Step 3Set the cooking time.
Step 4
Step 5Press: End action.
Step 6Choose the preferred: End action.
Step 7
Set the time. Press: .
Press: .
Set the time. Press: .
Press: .
Press: .
Press: . Repeat the action until the display shows the main screen.
How to delay start of cooking
Step 1Set the heating function and the temperature.
Step 2
Step 3Set the cooking time.
Step 4
Step 5Press: Delayed start.
Step 6Choose the value.
Press: .
Press: .
18ENGLISH
How to delay start of cooking
Step 7
Press: . Repeat the action until the display shows the main screen.
How to extend cooking time
When 10% of cooking time is left and the food seems not to be ready, you can extend cooking time. You can also
change the heating function.
Press +1min to extend the cooking time.
How to change timer settings
Step 1
Step 2Set the timer value.
Step 3
You can change the set time during cooking at any time.
Press: .
Press: .
8. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
8.1 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
Wire shelf:
Push the shelf between the guide bars of the shelf
support.
devices. The high rim around the shelf
prevents cookware from slipping of the shelf.
ENGLISH19
Deep pan:
Push the tray between the guide bars of the shelf
support.
8.2 Using Trivet and Grill- / Roasting
pan
WARNING!
Be careful when you remove the
accessories from a hot oven. There is a
risk of burns.
You can use the trivet to roast larger pieces of meat or poultry on one shelf position.
Step 1Put the trivet into the deep pan so that the
supports of the wire shelf point up.
Step 2Put the deep pan into the oven on the necessary shelf position.
You can use the trivet to grill flat dishes in large quantities and to toast.
Step 1Put the trivet into the deep pan so that the
Step 2Put the deep pan into the oven on the necessary shelf position.
supports of the wire shelf point down.
20ENGLISH
8.3 Food Sensor
Food Sensor - measures the temperature inside the food. You can use it with every heating
function.
There are two temperatures to be set:
The oven temperature: minimum 120 °C.
The core temperature.
For the best cooking results:
Ingredients should be at room tem‐
perature.
Do not use it for liquid dishes. During cooking it must remain in the dish.
The oven calculates an approximate end of cooking time. It depends on the quantity of food,
the set oven function and the temperature.
8.4 How to use: Food Sensor
Step 1Turn on the oven.
Step 2Set a heating function and, if necessary, the oven temperature.
Step 3Insert: Food Sensor.
Meat, poultry and fishCasserole
Insert the tip of Food Sensor into the centre of meat,
fish, in the thickest part if possible. Make sure that at
least 3/4 of Food Sensor is inside of the dish.
Insert the tip of Food Sensor exactly in the centre of the
casserole. Food Sensor should be stabilized in one place
during baking. Use a solid ingredient to achieve that. Use
the rim of the baking dish to support the silicone handle of
Food Sensor. The tip of Food Sensor should not touch the
bottom of a baking dish.
Step 4Plug Food Sensor into the socket at the front of the oven.
Step 5
The display shows the current temperature of: Food Sensor.
- press to set the core temperature of the sensor.
ENGLISH21
Step 6
Step 7
Step 8
Step 9Remove Food Sensor plug from the socket and remove the dish from the oven.
- press to set the preferred option:
• Sound alarm - when food reaches the core temperature, the signal sounds.
• Sound alarm and stop cooking - when food reaches the core temperature, the signal sounds
and the oven stops.
Select the option and repeatedly press: to go to main screen.
Press: .
When food reaches the set temperature, the signal sounds. You can choose to stop or to continue
cooking to make sure the food is well done.
WARNING!
There is a risk of burns as Food Sensor becomes hot. Be careful when you
unplug it and remove it from the food.
9. ADDITIONAL FUNCTIONS
9.1 How to save: Favourites
You can save your favourite settings, such as the heating function, the cooking time, the
temperature or the cleaning function. You can save 3 favourite settings.
Step 1Turn on the appliance.
Step 2Select the preferred setting.
Step 3
Step 4Select: Save current settings.
Step 5
Press: . Select: Favourites.
Press + to add the setting to the list of: Favourites. Press .
- press to reset the setting.
- press to cancel the setting.
9.2 Function lock
This function prevents an accidental change of the heating function.
Step 1Turn on the appliance.
Step 2Set a heating function.
Step 3
To turn off the function repeat step 3.
, - press at the same time to turn on the function.
22ENGLISH
9.3 Automatic switch-off
For safety reasons the appliance turns off
after some time, if a heating function works
and you do not change any settings.
(°C) (h)
250 - maximum3
The Automatic switch-off does not work with
(°C) (h)
30 - 11512.5
120 - 1958.5
200 - 2455.5
the functions: Light, Food sensor, End time,
Slow Cooking.
9.4 Cooling fan
When the appliance operates, the cooling fan
turns on automatically to keep the surfaces of
the appliance cool. If you turn off the
appliance, the cooling fan can continue to
operate until the appliance cools down.
10. HINTS AND TIPS
10.1 Cooking recommendations
The temperature and cooking times in the tables are guidelines only. They depend on the recipes and the quality
and quantity of the ingredients used.
Your appliance may bake or roast differently to the appliance you had before. The hints below show recommen‐
ded settings for temperature, cooking time and shelf position for specific types of the food.
If you cannot find the settings for a special recipe, look for the similar one.
For more cooking recommendations refer to cooking tables on our website. To find the Cooking Hints, check the
PNC number on the rating plate on the front frame of the appliance cavity.
10.2 Moist Fan Baking
For the best results follow suggestions listed
in the table below.
(°C)(min)
Sweet rolls, 16
pieces
Swiss Rollbaking tray or dripping pan180215 - 25
Whole fish, 0.2 kgbaking tray or dripping pan180315 - 25
Cookies, 16 piecesbaking tray or dripping pan180220 - 30
Macaroons, 24
pieces
Muffins, 12 piecesbaking tray or dripping pan180220 - 30
baking tray or dripping pan180225 - 35
baking tray or dripping pan160225 - 35
ENGLISH23
(°C)(min)
Savory pastry, 20
pieces
Short crust biscuits,
20 pieces
Tartlets, 8 piecesbaking tray or dripping pan180215 - 25
baking tray or dripping pan180220 - 30
baking tray or dripping pan140215 - 25
10.3 Moist Fan Baking - recommended accessories
Use the dark and non-reflective tins and containers. They have better heat absorption than the
light colour and reflective dishes.
Apple pie, 2 tins Ø20 cmTrue Fan Cooking16055 - 652
Apple pie, 2 tins Ø20 cmConventional Cooking18055 - 651
Short breadTrue Fan Cooking14025 - 352
Short breadConventional Cooking14025 - 352
Baking on one level - biscuits
Use the third shelf position.
24ENGLISH
°Cmin
Small cakes, 20 per tray, preheat
the empty oven
Small cakes, 20 per tray, preheat
the empty oven
True Fan Cooking15020 - 30
Conventional Cooking17020 - 30
Multilevel baking - biscuits
°Cmin
Short breadTrue Fan Cooking14025 - 452 / 4
Small cakes, 20 per tray, pre‐
heat the empty oven
Fatless sponge cakeTrue Fan Cooking16045 - 552 / 4
Apple pie, 1 tin per grid (Ø 20
cm)
True Fan Cooking15025 - 351 / 4
True Fan Cooking16055 - 652 / 4
Grill
Preheat the empty oven for 5 minutes.
Grill with the maximum temperature setting.
min
ToastGrill1 - 25
Beef steak, turn halfway throughGrill24 - 304
11. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
11.1 Notes on cleaning
Clean the front of the appliance only with a microfibre cloth with warm water and a mild de‐
tergent.
Use a cleaning solution to clean metal surfaces.
Cleaning Agents
Clean stains with a mild detergent.
ENGLISH25
Clean the cavity after each use. Fat accumulation or other residue may cause fire.
Do not store the food in the appliance for longer than 20 minutes. Dry the cavity only with a
microfibre cloth after each use.
Everyday Use
Clean all accessories after each use and let them dry. Use only a microfibre cloth with warm
water and a mild detergent. Do not clean the accessories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects.
Accessories
11.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1Turn off the oven and wait until it is cold.
Step 2Carefully pull the shelf supports up
Step 3Pull the front end of the shelf support
Step 4Pull the supports out of the rear
Install the shelf supports in the opposite sequence.
and out of the front catch.
away from the side wall.
catch.
11.3 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in
the same cabinet, do not use them at the
same time as this function. It can cause
damage to the oven.
Before the Pyrolytic Cleaning:
Turn off the oven and wait until
it is cold.
Remove all accessories.Clean the oven floor and the inner door
glass with warm water, a soft cloth and
Do not fill the water tank during cleaning. It restarts the cleaning cycle.
Step 1Turn on the oven.
Step 2
Press: / Cleaning.
26ENGLISH
a mild detergent.
Step 3Put the baking tray on the first shelf position to collect water from the water tank.
- press to start water tank emptying.
Step 4When the tank emptying ends remove the baking tray and removable shelf supports. Wipe the oven
cavity and the inner door glass with a soft cloth. Press: .
Step 5Select the cleaning mode.
OptionCleaning modeDuration
Pyrolytic cleaning, quickLight cleaning1 h
Pyrolytic cleaning, normalNormal cleaning1 h 30 min
Pyrolytic cleaning, intenseThorough cleaning3 h
When the cleaning starts, the lamp is off and the cooling fan works at a higher speed.
- press to stop the cleaning before it is completed.
Do not use the oven until the door lock symbol disappears from the display.
When the cleaning ends:
Turn off the oven and wait until it
is cold.
Clean the cavity with a soft cloth.Remove the residue from the bottom of
the cavity.
11.4 Cleaning Reminder
When the reminder appears, cleaning is recommended.
Use the function: Pyrolytic Cleaning.
11.5 How to use: Descaling
Before you start:
Turn off the oven and wait until it is
cold.
Duration of the first part: around 100 min
Step 1Place the deep pan on the first shelf position.
Step 2Pour 250 ml of the descaling agent in the water drawer.
Step 3Fill the remaining part of the water drawer with water to the maximum level until the signal sounds
or the display shows the message.
Step 4Select: Menu / Cleaning.
Step 5Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6After the first part is over, empty the deep pan and put it back on the first shelf position.
Duration of the second part: around 35 min
Remove all accessories.Make sure that the water drawer is
empty.
ENGLISH27
Step 7Fill the remaining part of the water drawer with water to the maximum level until the signal sounds
Step 8When the function ends, remove the deep pan.
When this function works, the lamp is off.
or the display shows the message.
When descaling ends:
Turn off the oven.When the oven is cold, dry the cavity
with a soft cloth.
If some limestone residue remains in the oven after descaling, the display prompts to repeat the procedure.
Leave the oven door open and wait
until the cavity is dry.
11.6 Descaling reminder
There are two reminders which prompt you to descale the oven. You cannot disable the
descaling reminder.
TypeDescription
Soft reminderRecommends you to descale the oven.
Hard reminderObligates you to descale the oven. If you do not descale the oven when the hard
reminder is on, the steam functions are disabled.
11.7 How to use: Rinsing
Before you start:
Turn off the oven and wait until it is cold.Remove all accessories.
Step 1Place the deep pan on the first shelf position.
Step 2Fill the water drawer with water to the maximum level until the signal sounds or the display shows
Step 3Select: Menu / Cleaning / Rinsing.
Step 4Turn on the function and follow the instruction on the display.
Step 5When the function ends, remove the deep pan.
When this function works, the lamp is off.
the message.
Duration: around 30 min
11.8 How to use: Tank emptying
Use it after cooking with steam heating function to remove the residual water from the water
drawer.
Before you start:
Turn off the oven and wait until it is cold.Remove all accessories.
28ENGLISH
Step 1Place the deep pan on the first shelf position.
A
A
1
2
B
Step 2Select: Menu / Cleaning / Tank emptying.
Step 3Turn on the function and follow the instruction on the display.
Step 4When the function ends, remove the deep pan.
When this function works, the lamp is off.
Duration: 6 min
11.9 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
CAUTION!
Carefully handle the glass, especially
around the edges of the front panel. The
glass can break.
WARNING!
The door is heavy.
Step 1Fully open the door.
Step 2Lift and press the clamping levers
Step 3Close the oven door to the first opening position (approximately 70° angle). Hold the door at both
Step 4Hold the door trim (B) on the top
Step 5Pull the door trim to the front to re‐
Step 6Hold the door glass panels on their
(A) on the two door hinges.
sides and pull it away from the oven at an upwards angle. Put the door with the outer side down on
a soft cloth on a stable surface.
edge of the door at the two sides
and push inwards to release the clip
seal.
move it.
top edge one by one and pull them
up out of the guide.
ENGLISH29
Step 7Clean the glass panel with water
Step 8After cleaning, do the above steps
Step 9Install the smaller panel first, then the larger and the door.
and soap. Dry the glass panel care‐
fully. Do not clean the glass panels
in the dishwasher.
in the opposite sequence.
11.10 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Before you replace the lamp:
Step 1Step 2Step 3
Turn off the oven. Wait until the
oven is cold.
Disconnect the oven from the
mains.
Top lamp
Step 1Turn the glass cover to remove it.
Put a cloth on the bottom of the cav‐
ity.
Step 2Remove the metal ring and clean the glass cover.
Step 3Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4Attach the metal ring to the glass cover and install it.
30ENGLISH
Side lamp
Step 1Remove the left shelf support to get ac‐
Step 2Use a narrow, blunt object (e.g. a tea‐
Step 3Clean the glass cover.
Step 4Replace the lamp with a suitable 300 °C
Step 5Install the glass cover.
Step 6Install the left shelf support.
cess to the lamp.
spoon) to remove the glass cover.
heat-resistant lamp.
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
The appliance does not turn on or does not heat up
Possible cause
The appliance is not connected to an electrical supply
or it is connected incorrectly.
The clock is not set.Set the clock, for details refer to Clock functions chap‐
The door is not closed correctly.Fully close the door.
The fuse is blown.Make sure the fuse is the cause of the problem. If the
The appliance Child Lock is on.Refer to "Menu" chapter, Submenu for: Options.
Remedy
Check if the appliance is correctly connected to the
electrical supply.
ter, How to set: Clock functions.
problem recurs, contact a qualified electrician.
ENGLISH31
Components
Description
The lamp is burnt out.Replace the lamp, for details refer to "Care and Clean‐
Remedy
ing" chapter, How to replace: Lamp.
Power cut always stops cleaning. Repeat
cleaning if it's interrupted by power failure.
Problems with Wi-Fi signal
Possible cause
Trouble with wireless network signal.Check if your mobile device is connected to the wire‐
New router installed or router configuration changed.To configure appliance and mobile device again, refer
The wireless network signal is weak.Move router as close to the appliance as possible.
The wireless signal is disrupted by another microwave
oven placed near the appliance.
Remedy
less network.
Check your wireless network and router.
Restart the router.
to "Before first use" chapter, Wireless connection.
Turn off the microwave oven.
Avoid using another microwave oven and the Remote
Control of the appliance at the same time. Microwaves
disrupt Wi-Fi signal.
12.2 How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description Remedy
C2 - the Food sensor is in the appliance cavity during
Pyrolytic Cleaning.
C3 - the door is not fully closed during Pyrolytic Clean‐
ing.
F111 - Food sensor is not correctly inserted into the
socket.
F240, F439 - the touch fields on the display do not
work properly.
F601 - there is a problem with Wi-Fi signal.Check your network connection. Refer to "Before first
Take out the Food sensor.
Close the door.
Fully plug Food sensor into the socket.
Clean the surface of the display. Make sure there is no
dirt on the touch fields.
use" chapter, Wireless connection.
32ENGLISH
Code and description Remedy
F604 - the first connection to Wi-Fi failed.Turn the appliance off and on and try again. Refer to
F908 - the appliance system cannot connect with the
control panel.
"Before first use" chapter, Wireless connection.
Turn the appliance off and on.
When one of these error messages continues to appear on the display, it means a faulty
subsystem may have been disabled. In such a case contact your dealer or an Authorized
Service Centre. If one of these errors occurs, the rest of the appliance functions will continue to
work as usually.
Code and description Remedy
F602, F603 - Wi-Fi is not available.Turn the appliance off and on.
12.3 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.
We recommend that you write the data here:
Model (MOD.).........................................
Product number (PNC).........................................
Serial number (S.N.).........................................
13. ENERGY EFFICIENCY
13.1 Product Information and Product Information Sheet
Supplier's nameAEG
Model identificationBSK778380T 944188812
Energy Efficiency Index61.2
Energy efficiency classA++
Energy consumption with a standard load, conventional mode1.09 kWh/cycle
Energy consumption with a standard load, fan-forced mode0.52 kWh/cycle
Number of cavities1
Heat sourceElectricity
Volume71 l
ENGLISH33
Type of ovenBuilt-In Oven
Mass36.5 kg
For EU: IEC/EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills
- Methods for measuring performance.
For UK: BS EN 60350-1 - Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills
- Methods for measuring performance.
13.2 Energy saving
The appliance has features which help
you save energy during everyday
cooking.
Make sure that the appliance door is closed
when the appliance operates. Do not open
the appliance door too often during cooking.
Keep the door gasket clean and make sure it
is well fixed in its position.
Use metal cookware to improve energy
saving.
When possible, do not preheat the appliance
before cooking.
Keep breaks between baking as short as
possible when you prepare a few dishes at
one time.
Cooking with fan
When possible, use the cooking functions
with fan to save energy.
Residual heat
If a programme with Duration is activated and
the cooking time is longer than 30 min, the
heating elements automatically turn off earlier
in some appliance functions.
The fan and lamp continue to operate. When
you turn off the appliance, the display shows
the residual heat. You can use that heat to
keep the food warm.
When the cooking duration is longer than 30
min, reduce the appliance temperature to
minimum 3 - 10 min before the end of
cooking. The residual heat inside the
appliance will continue to cook.
Use the residual heat to warm up other
dishes.
Keep food warm
Choose the lowest possible temperature
setting to use residual heat and keep a meal
warm. The residual heat indicator or
temperature appears on the display.
Cooking with the lamp off
Turn off the lamp during cooking. Turn it on
only when you need it.
Moist Fan Baking
Function designed to save energy during
cooking.
When you use this function the lamp
automatically turns off after 30 sec. You may
turn on the lamp again but this action will
reduce the expected energy savings.
14. MENU STRUCTURE
14.1 Menu
Menu itemApplication
Assisted CookingLists automatic programmes.
CleaningLists cleaning programmes.
FavouritesLists the favourite settings.
34ENGLISH
Menu itemApplication
OptionsTo set the appliance configuration.
SettingsConnectionsTo set the network configuration.
SetupTo set the appliance configuration.
ServiceShows the software version and configuration.
14.2 Submenu for: Cleaning
SubmenuApplication
Tank emptyingProcedure for removing the residual water from the water drawer after use of the
Pyrolytic cleaning, quickDuration: 1 h.
Pyrolytic cleaning, normalDuration: 1 h 30 min.
Pyrolytic cleaning, intenseDuration: 3 h.
DescalingProcedure for cleaning the steam generation circuit from residual limestone.
RinsingProcedure for rinsing and cleaning the steam generation circuit after frequent use
steam functions.
of the steam functions.
14.3 Submenu for: Options
SubmenuApplication
LightTurns the lamp on and off.
Child LockPrevents accidental activation of the appliance. When the option is on, the text
Fast Heat UpShortens the heat up time. It is available only for some of the appliance functions.
Cleaning ReminderTurns the reminder on and off.
Time indicationTurns the clock on and off.
Digital clock styleChanges the format of the displayed time indication.
Child Lock appears in the display when you turn on the appliance. To enable the
appliance use, choose the code letters in the alphabetical order. When the option
is on, and the appliance is turned off the appliance door is locked. Access to the
timer, the remote operation and the lamp is available with the option on.
14.4 Submenu for: Connections
SubmenuDescription
Wi-FiTo enable and disable: Wi-Fi.
Remote operationTo enable and disable remote control.
Auto remote operationTo start remote operation automatically after pressing START.
Option visible only after you turn on: Wi-Fi.
Option visible only after you turn on: Wi-Fi.
ENGLISH35
SubmenuDescription
NetworkTo check network status and the signal power of: Wi-Fi.
Forget networkTo disable current network from auto connection with the appliance.
14.5 Submenu for: Setup
SubmenuDescription
LanguageSets the appliance language.
Display brightnessSets the display brightness.
Key tonesTurns the tone of the touch fields on and off. It is not possible to mute the tone for:
.
Buzzer volumeSets the volume of key tones and signals.
Water hardnessSets the water hardness.
Time of daySets the current time and date.
14.6 Submenu for: Service
SubmenuDescription
Demo modeActivation / deactivation code: 2468
Software versionInformation about software version.
Reset all settingsRestores factory settings.
15. IT'S EASY!
Before the first use you have to set:
Language
Start using the appliance
Quick startTurn on the appli‐
Quick OffTurn off the appli‐
36ENGLISH
Display bright‐
ness
ance and start cook‐
ing with the default
temperature and
time of the function.
ance, any screen or
message at any
time.
Key tonesBuzzer volumeWater hardnessTime of day
Step 1Step 2Step 3
Press and hold: . - select the
preferred function.
- press and hold until the appliance turns off.
Press: .
Start cooking
Step 1Step 2Step 3Step 4Step 5
- press to turn on the
appliance.
- select the heating
function.
- set the tempera‐
ture.
- press to confirm.
Get to know how to cook quickly
Use the automatic programmes to prepare a dish quickly with the default settings:
Assisted Cook‐
ing
Step 1Step 2Step 3Step 4
Press: .Press: .Press: Assisted
Cooking.
Use quick functions to set the cooking time
10% Finish assist
Use 10% Finish assist to add extra time when 10% of
the cooking time is left.
To extend the cooking time press +1min.
16. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the
packaging in relevant containers to recycle it.
Help protect the environment and human
health by recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol with
the household waste. Return the product to
your local recycling facility or contact your
municipal office.
- press to start cook‐
ing.
Choose the dish.
ENGLISH37
*
867380202-B-052023
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.