Aeg SKK818E9ZC, 923 586 027 User Manual

Page 1
USER MANUAL
SKK818E9ZC
EN User Manual
Refrigerator
Page 2
www.aeg.com2

CONTENTS

1. SAFETY INFORMATION......................................................................................2
2. SAFETY INSTRUCTIONS.................................................................................... 4
3. INSTALLATION.....................................................................................................6
4. CONTROL PANEL................................................................................................9
5. DAILY USE......................................................................................................... 11
6. HINTS AND TIPS................................................................................................13
7. CARE AND CLEANING...................................................................................... 15
8. TROUBLESHOOTING........................................................................................16
9. NOISES...............................................................................................................20
10. TECHNICAL DATA........................................................................................... 20
11. INFORMATION FOR TEST INSTITUTES........................................................ 20
12. ENVIRONMENTAL CONCERNS......................................................................21
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website to:
Get usage advice, brochures, trouble shooter, service and repair information:
www.aeg.com/support
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result
Page 3
ENGLISH 3
of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 to 8 years are allowed to load
and unload the appliance provided that they have been properly instructed.
This appliance may be used by persons with very
extensive and complex disabilities provided that they have been properly instructed.
Children of less than 3 years of age should be kept
away from the appliance unless continuously supervised.
Children should be supervised to ensure that they do
not play with the appliance.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of
it appropriately.

1.2 General Safety

This appliance is for storing food and baverages only.
This appliance is designed for single household
domestic use in an indoor environment.
This appliance may be used in, offices, hotel guest
rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
To avoid contamination of food respect the following
instructions:
do not open the door for long periods;
Page 4
www.aeg.com4
clean regularly surfaces that can come in contact
with food and accessible drainage systems;
store raw meat and fish in suitable containers in the
refrigerator, so that it is not in contact with or drip onto other food.
WARNING: Keep ventilation openings, in the
appliance enclosure or in the built-in structure, clear of
obstruction.
WARNING: Do not use mechanical devices or other
means to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the
food storage compartments of the appliance, unless
they are of the type recommended by the
manufacturer.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
When the appliance is empty for long period, switch it
off, defrost, clean, dry and leave the door open to
prevent mould from developing within the appliance.
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the built-in structure due to safety manner.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Make sure the air can circulate around the appliance.
Page 5
ENGLISH 5
• At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
• Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
• Do not install the appliance close to radiators or cookers, ovens, or hobs, unless otherwise specified in the installation instructions.
• Do not expose the appliance to the rain.
• Do not install the appliance where there is direct sunlight.
• Do not install this appliance in areas that are too humid or too cold.
• When you move the appliance, lift it by the front edge to avoid scratching the floor.
• The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately.

2.2 Electrical connection

WARNING!
Risk of fire and electric shock.
WARNING!
When positioning the appliance, ensure the supply cord is not trapped or damaged.
WARNING!
Do not use multi-plug adapters and extension cables.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service
Centre or an electrician to change the electrical components.
• The mains cable must stay below the level of the mains plug.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

2.3 Use

WARNING!
Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
• Do not change the specification of this
appliance.
• Any use of the built-in product as free-
standing is strictly prohibited.
• Do not put electrical appliances (e.g.
ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
• If damage occurs to the refrigerant
circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
• Do not let hot items to touch the
plastic parts of the appliance.
• Do not store flammable gas and liquid
in the appliance.
• Do not put flammable products or
items that are wet with flammable products in, near or on the appliance.
• Do not touch the compressor or the
condenser. They are hot.

2.4 Internal lighting

WARNING!
Risk of electric shock.
• This product contains one or more
light sources of energy efficiency class F.
Page 6
www.aeg.com6
• Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.

2.5 Care and cleaning

WARNING!
Risk of injury or damage to the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
• This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
• Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.

2.6 Service

• To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
• Please note that self-repair or non­professional repair can have safety consequences and might void the guarantee.
• The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
• Door gaskets will be available for 10 years after the model has been discontinued.

2.7 Disposal

WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
• The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
• Do not cause damage to the part of the cooling unit that is near the heat exchanger.

3. INSTALLATION

WARNING!
Refer to Safety chapters.
WARNING!
Refer to installation instruction document to install your appliance.
WARNING!
Fix the appliance in accordance with installation instruction document to avoid a risk of instability of the appliance.
Page 7

3.1 Dimensions

B
A
H1
W1
D1
W2
D2
W3
D3
ENGLISH 7
Overall dimensions ¹
H1 mm 1769
W1 mm 556
D1 mm 549
¹ the height, width and depth of the appliance without the handle
Space required in use ²
H2 (A+B) mm 1816
W2 mm 560
Space required in use ²
D2 mm 552
A mm 1780
B mm 36
² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
Overall space required in use ³
H3 (A+B) mm 1816
Page 8
A B
C
D E
www.aeg.com8
Overall space required in use ³
W3 mm 780
D3 mm 1085
³ the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air, plus the space necessary to allow door opening to the minimum angle permitting removal of all internal equipment

3.2 Location

To ensure appliance's best functionality, you should not install the appliance in a place with direct sunlight. Do not install the appliance close to radiators or cookers, ovens, or hobs, unless otherwise specified in the installation instructions.
Make sure that air can circulate freely around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
This appliance is intended to be used at ambient temperature ranging from 10°C to 38°C.
The correct operation of the appliance can only be guaranteed within the specified temperature range.
If you have any doubts regarding where to install the appliance, please turn to the vendor, to our customer service or to the nearest Authorised Service Centre.
It must be possible to disconnect the appliance from the mains power supply. The plug must therefore be easily accessible after installation.

3.3 Electrical Connection

CAUTION!
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING!
This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed.
The wires in the mains lead are coloured in accordance with the following code:
A - green and yellow: Earth
C - brown: Live
D - blue: Neutral
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with the letter “E“ or by the earth
symbol or coloured green and yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter “N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the “L“ or coloured red.
Page 9
38 mm
min. 200 cm
2
min. 200 cm
2
56 4 3 2
1
ENGLISH 9
4. Check that no cut, or stray strands of wire is present and the cord clamp (E) is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse (B). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely.

3.4 Ventilation requirements

The airflow behind the appliance must be sufficient.
CAUTION!
Refer to the installation instructions for the installation.

3.5 Door reversibility

Please refer to the separate document with instructions on installation and door reversal.
CAUTION!
At every stage of reversing the door protect the floor from scratching with a durable material.

4. CONTROL PANEL

Display
1
Temperature warmer button
2 3
Temperature colder button
OK
4 5 6
Mode ON/OFF
Page 10
Off
min
A B C D
EFG
www.aeg.com10
It is possible to change predefined sound of buttons by pressing together Mode

4.1 Display

4.2 Switching on

1. Connect the mains plug to the power socket.
2. Press the appliance ON/OFF if the display is off. The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".
If "dEMo" appears on the display, refer to "Troubleshooting" .

4.3 Switching off

1. Press the appliance ON/OFF for 3 seconds.
The display switches off.
2. Disconnect the mains plug from the power socket.

4.4 Temperature regulation

Set the temperature of the appliance by pressing the temperature regulators. Recommended set temperature is:
• +4°C for the fridge
The temperature range may vary between 2°C and 8°C for fridge.
The temperature indicators show the set temperature.
The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored.

4.5 Coolmatic function

If you need to insert in the fridge compartment a large amount of warm food, for example after doing the grocery
and temperature colder button for a few seconds. Change is reversible.
A. Timer indicator B. Coolmatic function C. LongFresh function D. Temperature indicator E. Alarm indicator F. ChildLock function G. DrinksChill function
shopping, we suggest activating the Coolmatic function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator.
1. Press the Mode until the corresponding icon appears.
The Coolmatic indicator flashes.
2. Press the OK to confirm.
The Coolmatic indicator is shown. When the Coolmatic function is on, the fan may work automatically. This function stops automatically after approximately 6 hours.
You can deactivate the Coolmatic function before its automatic end by repeating the procedure or by selecting a different fridge set temperature.
4.6 LongFresh compartment
setting
The storage temperature and the relative humidity in LongFresh compartment provide optimal conditions for the storage of various kinds of fresh food (like fish, meat, seafood, etc.) as it preserves its high nutritional values, as well as high humidity level much longer than regular refrigerator.
1. Press Mode until the corresponding icon appears.
The display shows 5. This is the default setting. Setting 3 ensures the most effective performance. The possible settings can vary from 1 (the coldest) to 5 (the warmest). Settings from 1 to 3 are suitable for fish and meat.
Page 11
ENGLISH 11
Settings 4 and 5 are suitable for vegetables and fruits. In these settings the compartment works similarly to the fridge compartment.
2. Press the temperature buttons on the control panel to select the required setting.
3. Press OK to confirm the setting.
The indicator returns to the fridge temperature setting in a few seconds.

4.7 ChildLock function

Activate the ChildLock function to lock the buttons from unintentional operation.
1. Press Mode until the corresponding icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown. To deactivate the ChildLock function, repeat the procedure until the ChildLock indicator turns off.

4.8 DrinksChill function

The DrinksChill function is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down food products for a certain period of time.
1. Press Mode until the corresponding icon appears.
The DrinksChill indicator flashes. The Timer shows the set value (30 minutes) for a few seconds.
2. Press the Timer regulator to change the Timer set value from 1 to 90 minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown. The Timer starts to flash (min). At the end of the countdown the "0 min" indicator flashes and an audible alarm sounds. Press OK to switch off the sound and terminate the function.
To switch off the function repeat the procedure until the DrinksChill indicator turns off.
It is possible to change the time at any time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button.

4.9 Door open alarm

If the fridge door is left open for approximately 5 minutes, the sound is on and alarm indicator flashes.
The alarm stops after closing the door. During the alarm, the sound can be muted by pressing any button.
If you do not press any button, the sound switches off automatically after around one hour to avoid disturbing.

5. DAILY USE

CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.

5.1 Positioning the door shelves

To permit storage of food packages of various sizes, the door shelves can be placed at different heights.
1. Gradually pull the shelf up until it comes free.
2. Reposition as required.
Page 12
1
2
www.aeg.com12
This model is equipped with a variable storage box which can be moved sideways.

5.2 Movable shelves

The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
This appliance is also equipped with a shelf consisting of two parts. The front half of the shelf can be placed under the second half to make better use of space.
To fold the shelf:
1. Take out the front half gently.
2. Slide it into the lower rail and under the second half.
Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.

5.3 LongFresh compartment

The storage temperature and the relative humidity in this compartment provide optimal conditions for the storage of various kinds of food.
To learn about the temperature settings in the LongFresh compartment please refer to the “LongFresh compartment setting” section.
LongFresh compartment is suitable for the storage of a variety of fresh food (like fish, meat, seafood, etc.) as it preserves its high nutritional values as well as high humidity level much longer in comparison to the regular refrigerator.

5.4 Humidity control

The LongFresh compartment has stops that prevent the drawers from falling out when fully extended. To remove the drawer:
1. Pull the drawer to the maximum.
2. Lift and pull out the drawer.
The drawers marked with water drop
symbols: and can be used according to the desired storage conditions independently of each other with lower or higher humidity.
Regulation for each drawer is separate and is controlled using the slide valve at the front of the drawer.
• “Dry”: low relative humidity. This humidity level is reached when both sliders are set into this position
and the ventilation openings are
wide open.
• “Humid”: high relative humidity.
Page 13
This humidity level is reached when both sliders are set in this position
and the ventilation openings are closed. Humidity is kept and can not escape.

5.5 DYNAMICAIR

The refrigerator compartment is equipped with a device that allows rapid cooling of foods and keeps more uniform temperature in the compartment.
WARNING!
Do not remove the Styrofoam at the bottom of the device.

6. HINTS AND TIPS

ENGLISH 13
This device activates automatically when needed.
The fan operates only when the door is closed.

6.1 Hints for energy saving

• Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
• Do not open the door frequently or leave it open longer than necessary.
• Do not set too high temperature to save energy unless it is required by the characteristics of the food.
• Ensure a good ventilation. Do not cover the ventilation grilles or holes.
• Make sure that food products inside the appliance allow air circulation through dedicated holes in the rear interior of the appliance.
6.2 Hints for fresh food
refrigeration
• Good temperature setting that ensures preservation of fresh food is a temperature less than or equal to +4°C. Higher temperature setting inside the appliance may lead to shorter shelf life of food.
• Cover the food with packaging to preserve its freshness and aroma.
• Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
• To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
• It is recommended to defrost the food inside the fridge.
• Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it.
• To prevent food waste the new stock of food should always be placed behind the old one.
6.3 Hints for food
refrigeration
• Fresh food compartment is the one
marked (on the rating plate) with .
• Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
• Fruit and vegetables: clean thoroughly (eliminate the soil) and place in a special drawer (vegetable drawer).
• It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
• Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
• Butter and cheese: place in an airtight container or wrap in an aluminium foil
Page 14
www.aeg.com14
or a polythene bag to exclude as much air as possible.
• Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
• Always refer to the expiry date of the products to know how long to keep

6.4 Hints for fresh food storage in LongFresh compartment

The LongFresh compartment is the one
marked with
and .
them.
Type of food Air humidity adjustment Storage time
Butter
Beef, venison, small meat cuts, poultry
Tomato sauce
Fish, shellfish, cooked meat products
Cooked seafood
Salad, vegetables
Carrots, herbs, brussels sprouts, celery
Artichokes, cauliflower, chicory, iceberg lettuce, en‐ dive, lamb’s lettuce, lettuce, leeks, radicchio
Broccoli, Chinese leaves, kale, cabbage, radishes, Savoy cabbage
Peas, kohlrabi
Spring onions, radishes, as‐ paragus, spinach
Fruit
Pears, dates (fresh), straw‐ berries, peaches
Plums rhubarb, gooseberries
Apples (not sensitive to cold), quinces
Apricots, cherries
Damsons, grapes
“dry”
“dry”
“dry”
“dry”
“dry”
“humid”
“humid”
“humid”
“humid”
“humid”
“humid”
“humid”
“humid”
“humid”
“humid”
up to 1 month
up to 7 days
up to 4 days
up to 3 days
up to 2 days
up to 1 month
up to 21 days
up to 14 days
up to 10 days
up to 7 days
up to 1 month
up to 21 days
up to 20 days
up to 14 days
up to 10 days
Page 15
Type of food Air humidity adjustment Storage time
Blackberries, currants
Figs (fresh)
Blueberries, raspberries
“humid”
“humid”
“humid”
up to 8 days
up to 7 days
up to 5 days
ENGLISH 15
Cakes containing cream and other kinds of pastry products can be stored in the LongFresh compartment for 2 or 3 days.
Not to be placed in the LongFresh compartment:
• Cold sensitive fruit which have to be stored at cellar or room temperature like pineapple, bananas, grapefruit, melons, mango, papaya, oranges, lemons, kiwi fruit.
• Vegetables which have to be stored at room temperature like tomatoes, potatoes, onions, and garlic.
• The types of food not mentioned above should be stored in the refrigerator compartment (e.g. all sorts of cheese, cold cuts, etc.).
The level of air humidity in the drawers depends on the content of humidity in the stored food, vegetable and fruit and on the frequency of door opening.
The LongFresh compartment is also suitable for slow thawing of food. In this case the thawed food can be stored in the LongFresh compartment for up to two days.
• Pay attention to the freshness of the food, especially on the expiry date. Quality and freshness influence the storage time.
• The whole storage cycle time will depend on the preservation conditions made prior to the final storage in the fridge.
• Any type of food, fruit, vegetable or animal food shall always be packed or wrapped up before storage.
• Food rich in proteins will go bad quicker. This means seafood will spoil before fish which in turn will spoil before meat. While storing food in a LongFresh compartment storage time for that kind of food can be increased by up to three times as well without loss on quality.
• All food stored in a LongFresh compartment should be taken out of the drawers roughly 15 - 30 min before consumption, particularly fruit and vegetables to be consumed without any additional cooking process. Allowing fruit and vegetables to return to room temperature will improve the texture and flavour.

7. CARE AND CLEANING

WARNING!
Refer to Safety chapters.

7.1 Cleaning the interior

Before using the appliance for the first time, the interior and all internal accessories should be washed with lukewarm water and some neutral soap to remove the typical smell of a brand­new product, then dried thoroughly.
CAUTION!
Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
CAUTION!
The accessories and parts of the appliance are not suitable for washing in a dishwasher.
Page 16
www.aeg.com16

7.2 Periodic cleaning

The equipment has to be cleaned regularly:
1. Clean the inside and accessories with lukewarm water and some neutral soap.
2. Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
3. Rinse and dry thoroughly.
7.3 Defrosting of the
refrigerator
Defrosting of the fridge compartment is automatic. The water that condenses

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Solution
The appliance does not op‐ erate.
The mains plug is not con‐
There is no voltage in the
The appliance is noisy. The appliance is not suppor‐
Acoustic or visual alarm is on.
The compressor operates continually.
Many food products were
The room temperature is too
The appliance is switched off.
nected to the mains socket correctly.
mains socket.
ted properly.
The door is left open. Close the door.
Temperature is set incorrect‐ ly.
put in at the same time.
high.
flows into a recipient on the compressor and evaporates. The recipient cannot be removed.

7.4 Period of non-operation

When the appliance is not in use for long period, take the following precautions:
1. Disconnect the appliance from electricity supply.
2. Remove all food.
3. Clean the appliance and all accessories.
4. Leave the door open to prevent unpleasant smells.
Switch on the appliance.
Connect the mains plug to the mains socket correctly.
Connect a different electrical appliance to the mains sock‐ et. Contact a qualified elec‐ trician.
Check if the appliance stands stable.
Refer to "Control panel" chapter.
Wait a few hours and then check the temperature again.
Refer to "Installation" chap‐ ter.
Page 17
Problem Possible cause Solution
Food products placed in the
appliance were too warm.
Allow food products to cool to room temperature before storing.
The door is not closed cor‐
rectly.
The Coolmatic function is switched on.
The compressor does not start immediately after
The compressor starts after a period of time.
Refer to "Closing the door" section.
Refer to "Coolmatic function" section.
This is normal, no error has
occurred. pressing the "Coolmatic", or after changing the tempera‐ ture.
Door is misaligned or inter‐ feres with ventilation grill.
Door does not open easily. You attempted to re-open
The lamp does not work. The lamp is in stand-by
The appliance is not level‐ led.
the door immediately after closing.
Refer to installation instruc‐
tions.
Wait a few seconds between
closing and re-opening of
the door.
Close and open the door.
mode.
The lamp is defective. Contact the nearest Author‐
ized Service Centre.
There is too much frost and ice.
The gasket is deformed or
Food products are not wrap‐
Temperature is set incorrect‐
Appliance is fully loaded and
Temperature set in the appli‐
The door is not closed cor‐ rectly.
dirty.
ped properly.
ly.
is set to the lowest tempera‐ ture.
ance is too low and the am‐ bient temperature is too
Refer to "Closing the door"
section.
Refer to "Closing the door"
section.
Wrap the food products bet‐
ter.
Refer to "Control panel"
chapter.
Set a higher temperature.
Refer to "Control panel"
chapter.
Set a higher temperature.
Refer to "Control panel"
chapter.
high.
Water flows on the rear plate of the refrigerator.
During the automatic de‐ frosting process, frost melts
This is correct.
on the rear plate.
ENGLISH 17
Page 18
www.aeg.com18
Problem Possible cause Solution
There is too much con‐ densed water on the rear
Door was opened too fre‐ quently.
wall of the refrigerator.
Door was not closed com‐
pletely.
Stored food was not wrap‐
ped.
Water flows on the floor. The melting water outlet is
not connected to the evapo‐ rative tray above the com‐ pressor.
Temperature cannot be set. The Coolmatic function is
switched on.
The temperature in the appli‐ ance is too low/too high.
The temperature is not set correctly.
The door is not closed cor‐
rectly.
The food products' tempera‐
ture is too high.
Many food products are stor‐
ed at the same time.
The door has been opened
often.
The Coolmatic function is switched on.
There is no cold air circula‐
tion in the appliance.
Some specific surfaces in‐
This is a normal state. side the fridge compartment are warmer at some times.
Open the door only when necessary.
Make sure the door is closed completely.
Wrap food in suitable pack‐ aging before storing it in the appliance.
Attach the melting water out‐ let to the evaporative tray.
Switch off Coolmatic function manually, or wait until the function deactivates auto‐ matically to set the tempera‐ ture. Refer to "Coolmatic function" section.
Set a higher/lower tempera‐ ture.
Refer to "Closing the door" section.
Let the food products tem‐ perature decrease to room temperature before storage.
Store less food products at the same time.
Open the door only if neces‐ sary.
Refer to "Coolmatic function" section.
Make sure that there is cold air circulation in the appli‐ ance. Refer to "Hints and tips" chapter.
Page 19
Problem Possible cause Solution
DEMO appears on the dis‐ play.
A or or symbol is shown instead of numbers on the temperature display.
The appliance is in the dem‐ onstration mode.
Temperature sensor prob‐ lem.
To exit the demonstration mode, press and hold the OK button for approximately 10 seconds until you hear a long sound and the display turns off for a short time.
Contact the nearest Author‐ ized Service Centre. The cooling system will continue to keep food products cold, but temperature adjustment will not be possible.
ENGLISH 19
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.

8.2 Replacing the lamp

The appliance is equipped with a longlife LED interior light.
Only service is allowed to replace the lighting device. Contact your Authorised Service Centre.

8.3 Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to installation instructions.
3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.
Page 20
SSSRRR!
CLICK!
HISSS!
BRRR!
BLUBB!
www.aeg.com20

9. NOISES

10. TECHNICAL DATA

The technical information is situated in the rating plate on the internal side of the appliance and on the energy label.
The QR code on the EU and UK energy labels supplied with the appliance provide a web link to the information related to the performance of the appliance. For the energy label with the EU flag, it is also possible to find the
information in the EU EPREL database using the link and the model name and product number that you find on the rating plate of the appliance. Keep the energy labels for reference together with the user manual and all other documents provided with this appliance.
https://eprel.ec.europa.eu

11. INFORMATION FOR TEST INSTITUTES

Installation and preparation of the appliance for any EcoDesign verification shall be compliant with BS EN 62552 (UK) or EN 62552 (EU). Ventilation requirements, recess dimensions and minimum rear clearances shall be as
stated in this User Manual in "Installation". Please contact the manufacturer for any other further information, including loading plans.
Page 21
12. ENVIRONMENTAL CONCERNS
ENGLISH 21
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
*
Page 22
Page 23
Page 24
www.aeg.com/shop
222381397-A-152023
Loading...