Aeg FSB52610Z, 911 536 388 User Manual [nl]

Page 1
USER MANUAL
FSB52610Z
NL Gebruiksaanwijzing 2
Afwasautomaat
EN User Manual 25
Dishwasher
Page 2
www.aeg.com
2

INHOUDSOPGAVE

VOOR PERFECTE RESULTATEN
Bedankt dat u voor dit AEG-product heeft gekozen. Dit apparaat is ontworpen om vele jaren uitstekend te presteren, met innovatieve technologieën die het leven gemakkelijker helpen maken met functies die gewone apparaten wellicht niet hebben. Neem een paar minuten de tijd om het door te lezen zodat u er optimaal van kunt profiteren.
Ga naar onze website voor:
Advies over gebruik, brochures, het oplossen van problemen en onderhoudsinformatie:
www.aeg.com/webselfservice
Registreer uw product voor een betere service:
www.registeraeg.com
Koop accessoires, verbruiksartikelen en originele reserveonderdelen voor uw apparaat:
www.aeg.com/shop
KLANTENSERVICE
Gebruik altijd originele onderdelen. Als u contact opneemt met de klantenservice zorg dat u de volgende gegevens bij de hand hebt: model, productnummer, serienummer. Deze informatie wordt vermeld op het typeplaatje.
Waarschuwing / Belangrijke veiligheidsinformatie Algemene informatie en tips Milieu-informatie
Wijzigingen voorbehouden.
Page 3

1. VEILIGHEIDSINFORMATIE

Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat. De fabrikant is niet verantwoordelijk voor verwondingen of schade die voortvloeit uit de onjuiste installatie of het onjuiste gebruik. Bewaar de instructies altijd op een veilige, toegankelijke plek voor toekomstig gebruik.

1.1 Veiligheid van kinderen en kwetsbare mensen

Dit apparaat kan worden gebruikt door kinderen van 8
jaar en ouder en door mensen met beperkte lichamelijke, zintuiglijke of verstandelijke vermogens of een gebrek aan ervaring en kennis, indien zij onder toezicht staan of instructies hebben gekregen over het veilig gebruiken van het apparaat en indien zij de eventuele gevaren begrijpen.
Kinderen tussen de 3 en 8 jaar oud en personen met
zware en complexe beperkingen dienen altijd uit de buurt van het apparaat te worden gehouden, tenzij ze voortdurend onder toezicht staan.
Kinderen jonger dan 3 jaar dienen, mits zij
voortdurend onder toezicht staan, bij het apparaat uit de buurt te worden gehouden.
Laat kinderen niet met het apparaat spelen.
Houd reinigingsmiddelen uit de buurt van kinderen.
Houd kinderen en huisdieren uit de buurt van het
apparaat als de deur open is.
Kinderen mogen zonder toezicht geen reinigings- en
onderhoudswerkzaamheden aan het apparaat uitvoeren.
NEDERLANDS
3

Algemene veiligheid

1.2
Dit apparaat is bedoeld voor gebruik in huishoudelijke
en soortgelijke toepassingen, zoals:
boerderijen; personeelskeukens in winkels,
kantoren of andere werkomgevingen;
Page 4
www.aeg.com4
door gasten in hotels, motels, bed&breakfasts- en
andere woonomgevingen.
De specificatie van dit apparaat niet wijzigen.
De waterdruk (minimaal en maximaal) moet liggen
tussen 0.5 (0.05) / 8 (0.8) bar (MPa)
Volg het maximale aantal 13 plaatsen.
Als de voedingskabel beschadigd is, moet de
fabrikant, een erkende serviceverlener of een
gekwalificeerd persoon deze vervangen teneinde
gevaarlijke situaties te voorkomen.
Leg het bestek in de besteklade met de scherpe
randen naar beneden of leg ze horizontaal in de
besteklade met de scherpe randen naar beneden.
Laat om ongelukken te voorkomen het apparaat niet
onbeheerd achter met open deur.
Schakel het apparaat uit en trek de stekker uit het
stopcontact voordat u onderhoudshandelingen
verricht.
Gebruik geen waterstralen onder druk en/of stoom
om het apparaat te reinigen.
Als het apparaat is voorzien van ventilatieopeningen
in de basis, mogen deze niet worden afgedekt met
bijv. een vloerkleed.
Het apparaat moet met de nieuwe slangset worden
aangesloten op een kraan. Oude slangsets mogen
niet opnieuw worden gebruikt.
2.

VEILIGHEIDSVOORSCHRIFTEN

2.1 Installatie

WAARSCHUWING!
Alleen een erkende installatietechnicus mag het apparaat installeren.
• Verwijder alle verpakkingsmaterialen.
• Installeer en gebruik geen beschadigd apparaat.
• Gebruik het apparaat niet voordat u het in de ingebouwde structuur installeert omwille van veiligheidsredenen.
• Volg de installatie-instructies op die zijn meegeleverd met het apparaat.
• Pas altijd op bij verplaatsing van het apparaat, want het is zwaar. Gebruik altijd veiligheidshandschoenen en gesloten schoeisel.
• Installeer of gebruik het apparaat niet op een plek waar de temperatuur onder de 0 °C komt.
• Installeer het apparaat op een veilige en geschikte plaats die aan alle installatie-eisen voldoet.
Page 5

2.2 Elektrische aansluiting

WAARSCHUWING!
Gevaar voor brand en elektrische schokken.
• Dit apparaat moet worden aangesloten op een geaard stopcontact.
• Zorg ervoor dat de parameters op het vermogensplaatje overeenkomen met elektrische vermogen van de netstroom.
• Gebruik altijd een juist geïnstalleerd schokbestendig stopcontact.
• Gebruik geen meerwegstekkers en verlengsnoeren.
• Zorg dat u de hoofdstekker en kabel niet beschadigt. Indien de voedingskabel moet worden vervangen, dan moet dit gebeuren door onze Klantenservice.
• Steek de stekker pas in het stopcontact als de installatie is voltooid. Zorg ervoor dat het netsnoer na installatie bereikbaar is.
• Trek niet aan het netsnoer om het apparaat los te koppelen. Trek altijd aan de stekker.
• Het apparaat is voorzien van een 13 ampère stekker. Als de zekering van de stekker vervangen moet worden, moet een ASTA (BS 1362)-zekering van 13-ampère worden gebruikt (uitsluitend VK en Ierland).
2.3 Aansluiting aan de
waterleiding
• Beschadig de waterslangen niet.
• Indien buizen lang niet zijn gebruikt, er reparaties hebben plaatsgevonden of er nieuwe apparaten zijn geplaatst (watermeters, enz.), moet u, voordat de nieuwe buizen worden aangesloten, het water laten stromen tot het schoon en helder is.
• Zorg ervoor dat er geen zichtbare waterlekken zijn tijdens en na het eerste gebruik van het apparaat.
• De watertoevoerslang heeft een veiligheidsventiel en een omhulsel met een hoofdkabel aan de binnenkant.
NEDERLANDS 5
WAARSCHUWING!
Gevaarlijke spanning.
• Als de watertoevoerslang beschadigd is, sluit dan onmiddellijk de waterkraan en haal de stekker uit het stopcontact. Neem contact op met de service-afdeling om de watertoevoerslang te vervangen.

2.4 Gebruik

• Plaats geen ontvlambare producten of items die vochtig zijn door ontvlambare producten in, bij of op het apparaat.
• Vaatwasmiddel is gevaarlijk. Volg de veiligheidsinstructies op de verpakking van het wasmiddel op.
• Speel niet met het water van het apparaat en drink het niet op.
• Verwijder de borden pas uit het apparaat als het programma is voltooid. Er kan wat wasmiddel op de vaat achterblijven.
• Ga niet op de open deur zitten of staan
• Het apparaat kan hete stoom laten ontsnappen als u de deur opent terwijl er een programma wordt uitgevoerd.

2.5 Service

• Neem contact op met de erkende servicedienst voor reparatie van het apparaat.
• Gebruik uitsluitend originele reserveonderdelen.

2.6 Verwijdering

WAARSCHUWING!
Gevaar voor letsel of verstikking.
Page 6
4
3
7
9
8
10
56
11
1
2
www.aeg.com6
• Haal de stekker uit het stopcontact.
• Snij het netsnoer van het apparaat af en gooi dit weg.
• Verwijder de deurgreep om te voorkomen dat kinderen en

3. PRODUCTBESCHRIJVING

huisdieren opgesloten raken in het apparaat.
Bovenste sproeiarm
1
Onderste sproeiarm
2
Filters
3
Typeplaatje
4
Zoutreservoir
5
Ventilatie
6

3.1 Beam-on-Floor

De Beam-on-Floor is een lichtstraal die op de vloer onder de deur van het apparaat verschijnt.
• Wanneer het programma start, gaat
• Wanneer het programma is voltooid,
• Als er een storing in het apparaat
de rode lichtstraal aan. De lichtstraal blijft gedurende het volledige programma zichtbaar.
gaat het groene lampje branden.
optreedt, gaat het rode licht knipperen.
Glansmiddeldoseerbakje
7
Vaatwasmiddeldoseerbakje
8
Bestekkorf
9
Onderkorf
10
Bovenkorf
11
De Beam-on-Floor gaat uit wanneer het apparaat wordt uitgeschakeld.
Als AirDry tijdens de droogfase wordt geactiveerd, is de projectie op de vloer mogelijk niet volledig zichtbaar. Controleer het bedieningspaneel om te zien of de cyclus beëindigd is.
Page 7

4. BEDIENINGSPANEEL

1 2 93 4 5 6 7 8
NEDERLANDS 7
Aan/uit-toets
1
Weergave
2
Delay-toets
3
Programmakeuzetoets (omhoog)
4
Programmakeuzetoets (omlaag)
5
6 7 8 9

4.1 Indicatielampjes

Aanduiding Beschrijving
Glansmiddelindicatielampje. Dit indicatielampje is altijd uit als het pro­gramma in werking is.
Zoutindicatielampje. Dit indicatielampje is altijd uit als het programma in werking is.

5. PROGRAMMA´S

Het aantal programma´s in de tabel (P1, P2, enz.) geven hun volgorde op het bedieningspaneel weer.
Programma Mate van vervui-
ling Type lading
P1
1)
P2
2)
P3 • Sterk bevuild
• Normaal bevuild
• Serviesgoed en bestek
• Alles
• Serviesgoed, be­stek en pannen
• Serviesgoed, be­stek en pannen
De volgorde van de programma´s in de tabel geven mogelijk hun volgorde op het bedieningspaneel niet weer.
Programmafasen Opties
• Voorspoelen
• Wassen 50 °C
• Spoelingen
• Drogen
• Voorspoelen
• Wassen van 45 °C tot 70 °C
• Spoelingen
• Drogen
• Voorspoelen
• Wassen 70 °C
• Spoelingen
• Drogen
TimeSaver-toets XtraDry-toets RESET-toets
Indicatielampjes
• TimeSaver
• XtraDry
• XtraDry
• TimeSaver
• XtraDry
Page 8
www.aeg.com8
Programma Mate van vervui-
Programmafasen Opties ling Type lading
P4
3)
P5 • Normaal of licht
• Pas bevuild
• Serviesgoed en
bestek
bevuild
• Teer servies-
• Wassen 60 °C of 65 °C
• Spoelingen
• Wassen 45 °C
• Spoelingen
• Drogen
• XtraDry
• XtraDry
goed en glas­werk
1)
Dit programma biedt het meest efficiënte water- en energieverbruik voor normaal vervuild servies-
goed en bestek. Dit is het standaard programma voor testinstituten.
2)
Het apparaat detecteert de mate van vervuiling en de hoeveelheid serviesgoed in de manden. De temperatuur en hoeveelheid water, het energieverbruik en de programmaduur worden automatisch aan­gepast.
3)
Met dit programma kunt u een pas bevuilde lading wassen. Het biedt goede afwasresultaten in een kort tijdsbestek.

5.1 Verbruiksgegevens

Programma
1)
Water
(l)
P1 9.9 0.920 237
P2 6 - 12 0.6 - 1.5 44 - 160
Energie
(kWh)
Programmaduur
(min.)
P3 14 - 15 1.5 - 1.7 155 - 171
P4 10 0.8 30
P5 13 - 14 1.0 - 1.1 75 - 85
1)
De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties en de hoeveelheid vaat kan de verbruikswaarden veranderen.

5.2 Aanwijzingen voor testinstituten

Om de nodige informatie te ontvangen over het uitvoeren van prestatietesten (bijv. volgens EN60436) stuurt u een e­mail naar:
Vermeld in uw verzoek de productnummercode (PNC) dat u op het typeplaatje aantreft.
Raadpleeg voor andere vragen betreffende uw vaatwasmachine het serviceboekje dat met uw apparaat is meegeleverd.
info.test@dishwasher-production.com
Page 9

6. INSTELLINGEN

NEDERLANDS 9
6.1 Programmakeuzemodus en
gebruikersmodus
Als het apparaat in de programmakeuzemodus staat, kan een programma worden ingesteld en de gebruikersmodus worden ingevoerd.
Instellingen die in de gebruikersmodus beschikbaar zijn:
• Het niveau van de waterverzachter afgestemd op de waterhardheid.
• De activering of de deactivering van het geluidsignaal voor het programma-einde.
• De activering of deactivering van de aanduiding leeg glansmiddelreservoir.
• De activering of deactivering van AirDry.
Omdat het apparaat de instellingen opslaat, hoeft u deze niet bij aanvang van iedere cyclus te configureren.

De programmakeuzemodus instellen

Het apparaat staat in de programmaselectiemodus als het display het programmanummer P1 weergeeft.
Na de activering bevindt het apparaat zich standaard in de programmakeuzemodus. Als dit niet zo is, stelt u de programmakeuzemodus als volgt in:
Houd tegelijkertijd RESET ingedrukt tot het apparaat in de programmakeuzemodus staat.

Gebruikersmodus ingaan

Zorg dat het apparaat in de keuzemodus Programma staat.
Houd om de gebruikersmodus in te voeren tegelijkertijd and ingedrukt tot de indicatielampjes ,
, en gaan knipperen en het
display blanco is.

6.2 De waterontharder

De waterontharder verwijdert mineralen van de watertoevoer die een nadelige invloed hebben op de wasresultaten en het apparaat.
Hoe hoger het gehalte van deze mineralen, des te harder is het water. De waterhardheid wordt gemeten in de volgende gelijkwaardige schalen.
De waterontharder moet worden afgesteld op de hardheid van het water in uw woonplaats. Uw waterleidingbedrijf kan u informeren over de hardheid van het water in uw woonplaats. Het is belangrijk om het correcte niveau voor de waterontharder in te stellen voor goede wasresultaten.
Het verzachten van hard water verhoogt het verbruik van water en energie, alsook de duur van het programma. Hoe hoger het niveau van waterverzachter, hoe hoger het verbruik en hoe langer de duur.
Waterhardheid
Duitse hard-
heid (°dH)
47 - 50 84 - 90 8,4 - 9,0 58 - 63 10
43 - 46 76 - 83 7,6 - 8,3 53 - 57 9
37 - 42 65 - 75 6,5 - 7,5 46 - 52 8
29 - 36 51 - 64 5,1 - 6,4 36 - 45 7
23 - 28 40 - 50 4,0 - 5,0 28 - 35 6
Franse hard-
heid (°fH)
mmol / l Clarke-hard-
heid
Wateronthardings-
niveau
Page 10
10
www.aeg.com
Duitse hard-
heid (°dH)
19 - 22 33 - 39 3,3 - 3,9 23 - 27
15 - 18 26 - 32 2,6 - 3,2 18 - 22 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 2
<4 <7 <0,7 <5
1)
Fabrieksinstelling.
2)
Gebruik geen zout op dit niveau.
Stel ongeacht het gebruikte soort wasmiddel het juiste waterhardheidniveau in om de bijvulindicator voor zout geactiveerd te houden.
Multivaatwastabletten die zout bevatten zijn niet effectief genoeg als waterontharder.

Het waterontharderniveau instellen

Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk op .
• De indicatielampjes , en
zijn uit.
• Het indicatielampje blijft
knipperen.
• Het display toont de huidige
instelling: bijv. = niveau 5.
2. Druk herhaaldelijk op om de
instelling te wijzigen.
3. Druk op de knop aan/uit om de
instelling te bevestigen.
Franse hard-
heid (°fH)
mmol / l Clarke-hard-
heid
Als het glansmiddelreservoir leeg is, gaat de glansmiddelindicator branden om aan te geven dat u glansmiddel moet bijvullen. Als u tevreden bent met de droogresultaten bij het gebruik van alleen multitabletten, kunt u de aanduiding voor het bijvullen van glansmiddel deactiveren. Voor de beste droogprestaties dient u echter altijd glansmiddel te gebruiken.
Schakel de aanduiding in om de glansmiddelindicator actief te houden als u standaard wasmiddel of multitabletten zonder glansmiddel gebruikt.

Het uitschakelen van de melding van een leeg glansmiddeldoseerbakje

Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk op .
• De indicatielampjes , en zijn uit.
• Het indicatielampje blijft
knipperen.
• Het display toont de huidige
instelling:

6.3 De aanduiding van leeg glansmiddelreservoir

Met glansmiddel wordt het serviesgoed zonder vlekken of strepen gedroogd.
Het glansmiddel wordt automatisch
2. Druk op
= de melding van leeg glansmiddeldoseerbakje is ingeschakeld (fabrieksinstelling).
om de instelling te
wijzigen.
vrijgegeven tijdens de warme spoelfase.
Wateronthardings-
niveau
1)
5
2)
1
Page 11
= de melding van leeg glansmiddeldoseerbakje is uitgeschakeld.
3. Druk op aan/uit om de instelling te
bevestigen.

6.4 Geluidssignalen

Er klinken geluidssignalen als het apparaat een storing heeft. Het is niet mogelijk deze geluidssignalen uit te schakelen.
Na het beëindigen van het programma klinkt er tevens een geluidssignaal. Dit geluidssignaal is standaard uitgeschakeld, maar kan worden geactiveerd.

Het geluidssignaal voor het einde van het programma inschakelen

Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk op
De indicatielampjes , en
• Het indicatielampje blijft knipperen.
• Het display toont de huidige instelling:
2. Druk op om de instelling te
wijzigen.
3. Druk op aan/uit om de instelling te
bevestigen.
.
zijn uit.
= Geluidssignaal uit.
= Geluidssignaal aan.

6.5 AirDry

AirDry biedt goede droogresultaten met minder energieverbruik.
NEDERLANDS
Tijdens de droogfase opent de deur automatisch en blijft op een kier staan.
LET OP!
Probeer de deur van het apparaat niet binnen 2 minuten na automatisch openen te sluiten. Dit kan het apparaat beschadigen.
AirDry wordt automatisch bij alle programma´s geactiveerd, behalve bij
(indien van toepassing).
Gebruik om de droogresultaten te verbeteren de optie XtraDry of activeer AirDry.
LET OP!
Als het apparaat toegankelijk is voor kinderen, adviseren wij u om AirDry te deactiveren, omdat het openen van de deur gevaarlijk kan zijn.

Het deactiveren van AirDry

Zorg dat het apparaat in de gebruikersmodus staat.
1. Druk op .
• De indicatielampjes zijn uit.
• Het indicatielampje
knipperen.
• Het display toont de huidige
instelling: ingeschakeld.
= AirDry
, en
blijft
11
Page 12
12
www.aeg.com
2. Druk op om de instelling te
wijzigen: = AirDry uitgeschakeld.

7. OPTIES

7.1 XtraDry

Activeer deze optie om de droogprestatie te versterken. Als XtraDry aanstaat, kunnen de duur van sommige programma's, het waterverbruik en de temperatuur van de laatste spoeling worden beïnvloed.
De optie XtraDry is een permanente optie voor alle programma's anders dan
worden gekozen.
De gewenste opties moeten elke keer dat u een programma start worden geactiveerd. De opties kunnen niet worden in- of uitgeschakeld als een programma in werking is.
Niet alle opties kunnen met elkaar worden gecombineerd. Als u opties hebt geselecteerd die niet met elkaar te combineren zijn, dan schakelt het apparaat automatisch één of meerdere opties uit. Alleen de indicatielampjes van de actieve opties zijn aan.
Als een optie niet van toepassing is op een programma, dan gaat het bijbehorende indicatielampje niet branden of het knippert even en gaat dan uit.
Het activeren van opties kan van invloed zijn zowel op het water- en energieverbruik, als op de programmaduur.
en hoeven niet iedere cyclus te
3. Druk op aan/uit om de instelling te
bevestigen.
In de andere programma´s is de instelling van XtraDry permanent en wordt in de volgende cycli automatische gebruikt. Deze configuratie kan met de tijd worden gewijzigd.
Elke keer dat wordt geactiveerd, gaat XtraDry uit en moet weer handmatig worden gekozen.
Het activeren van XtraDry schakelt TimeSaver uit en vice versa.

Het activeren van XtraDry

1. Druk tegelijkertijd op en .
-lampje brandt.
Het Het display geeft de bijgewerkte programmaduur weer.
2. Druk op . Het betreffende lampje brandt. Het display geeft de bijgewerkte programmaduur weer.

7.2 TimeSaver

Met deze optie verhoogt u de druk en de temperatuur van het water. De was­en droogfasen zijn korter.
De totale duur van het programma neemt met ongeveer 50% af.
De wasresultaten zijn hetzelfde als bij de normale programmaduur. De droogresultaten nemen mogelijk iets af.

Het activeren van TimeSaver

Druk op . Het betreffende lampje brandt. Het display geeft de bijgewerkte programmaduur weer.
Page 13

8. VOOR HET EERSTE GEBRUIK

A
B
D
C
NEDERLANDS 13
1. Controleer of het ingestelde stand van de waterontharder juist is voor de waterhardheid in uw omgeving. Indien niet, stel dan de stand van de waterontharder juist in.
2. Vul het zoutreservoir.
3. Vul het
glansspoelmiddeldoseerbakje.
4. Draai de waterkraan open.
5. Start een programma om resten te
verwijderen die misschien nog in het apparaat zijn achtergebleven. Gebruik geen afwasmiddel en plaats geen vaat in de korven.
Na het starten van het programma laadt het apparaat de hars in de waterverzachter maximaal 5 minuten op. De wasfase start pas nadat deze procedure voltooid is. De procedure wordt regelmatig herhaald.

8.1 Het zoutreservoir

LET OP!
Gebruik uitsluitend grof zout dat voor vaatwassers is gemaakt. Fijn zout verhoogt het risico op corrosie.
Het zout wordt gebruikt om de hars in de waterontharder te herladen en voor goede wasresultaten voor dagelijks gebruik.
4. Schud de trechter voorzichtig bij het
handvat om de laatste korrels erin te krijgen.
5. Verwijder het zout rond de opening
van het zoutreservoir.
6. Draai de dop van het zoutreservoir
rechtsom om het zoutreservoir te sluiten.
LET OP!
Water en zout kunnen uit het zoutreservoir stromen als u het bijvult. Start na het bijvullen van het zoutreservoir onmiddellijk een programma om corrosie te voorkomen.

8.2 Het vullen van het glansmiddeldoseerbakje

Het zoutreservoir vullen

1. Draai de dop linksom om het zoutreservoir te openen.
2. Doe 1 liter water in het zoutreservoir (alleen de eerste keer).
3. Vul het zoutreservoir met 1 kg zout (totdat het vol is).
Page 14
M
A
X
1
2
3
4
+
-
A
B
D
C
30
20
A BD
C
20
30
B
A D
C
www.aeg.com
14
LET OP!
Gebruik alleen glansmiddel voor vaatwassers.
1. Druk op de ontgrendelknop (D) om de deksel te openen (C).

9. DAGELIJKS GEBRUIK

1. Draai de waterkraan open.
2. Druk op de aan-/uittoets om het
apparaat te activeren.
Zorg dat het apparaat in de programmakeuzemodus staat.
• Vul het zoutreservoir als het
zoutindicatielampje brandt.
• Vul het glansmiddeldoseerbakje
als het indicatielampje van het glansmiddel brandt.
3. Ruim de korven in.
4. Voeg vaatwasmiddel toe.
5. U dient het juiste programma in te
stellen en te starten voor het type lading en de mate van vervuiling.

9.1 Vaatwasmiddel gebruiken

2. Giet het glansmiddel in het
doseervakje (A) tot de vloeistof het niveau 'max' heeft bereikt.
3. Verwijder gemorst glansmiddel met
een absorberend doekje om te voorkomen dat er te veel schuim ontstaat.
4. Sluit het deksel. Zorg ervoor dat het
ontgrendelknopje op zijn plaats dichtklikt.
U kunt het schuifje voor de vrij te geven hoeveelheid (B) instellen tussen stand 1 (laagste hoeveelheid) en stand 4 of 6 (hoogste hoeveelheid).
1. Druk op de ontgrendelknop (B) om de deksel te openen (C).
2. Doe de vaatwastablet of het poeder in het doseerbakje (A).
3. Als het programma over een voorspoelfase beschikt, plaats dan een kleine dosis vaatwasmiddel in doseerbakje (D).
4. Sluit het deksel. Zorg ervoor dat het ontgrendelknopje op zijn plaats dichtklikt.
Page 15
NEDERLANDS
15
9.2 Een programma instellen
en starten

De Auto Off-functie

Deze functie verlaagt het energieverbruik door het apparaat automatisch uit te schakelen als het niet werkt.
De functie gaat werken:
• 5 minuten na voltooiing van het programma.
• Als het programma na 5 minuten nog niet is gestart.

Een programma starten

Laat de deur op een kier staan.
1.
2. Druk op de aan/uit-knop om het
apparaat te activeren. Zorg dat het apparaat in de keuzemodus Programma staat.
3. Druk herhaaldelijk op of tot
het display het nummer van het gekozen programma weergeeft. Het nummer van het programma worden circa 3 seconden op het display weergegeven en toont daarna de programmaduur.
4. Stel de bruikbare opties in.
5. Sluit de deur van de afwasmachine
om het programma te starten.

Een programma starten met een uitgestelde start

1. Stel een programma in.
2. Blijf op drukken tot het display de
uitgestelde tijd toont die u wilt
instellen (van 1 tot 24 uur). Het controlelampje startuitstel gaat branden.
3. Sluit de deur van het apparaat om
het aftellen te starten. Als het aftellen loopt, kan de uitsteltijd worden vergroot maar het programma en de opties kunnen niet worden gewijzigd. Als het aftelproces voltooid is, wordt het programma gestart.

De deur openen als het apparaat in werking is

Als u de deur opent terwijl een programma loopt, stopt het apparaat. Dit kan het energieverbruik en de programmaduur beïnvloeden. Als u de deur weer sluit, gaat het apparaat verder vanaf het moment van onderbreking.
Als de deur tijdens de droogfase langer dan 30 seconden wordt geopend, stopt het lopende programma. Dit gebeurt niet als de deur wordt geopend door de functie AirDry.
Probeer de deur van het apparaat niet binnen 2 minuten nadat AirDry hem automatisch opent te openen, want dit kan schade aan het apparaat veroorzaken. Als hierna de deur gedurende nog 3 minuten wordt gesloten, beëindigt het draaiende programma.

De uitgestelde start annuleren tijdens het aftellen

Als u de uitgestelde start annuleert, moet u het programma en de opties opnieuw instellen.
Houd tegelijkertijd RESET ingedrukt tot het apparaat in de programmakeuzemodus staat.

Het programma annuleren

Houd tegelijkertijd RESET ingedrukt tot het apparaat in de programmakeuzemodus staat. Controleer of er vaatwasmiddel in het vaatwasmiddelbakje aanwezig is voordat u een nieuw programma start.

Einde van het programma

Als het programma is voltooid, wordt op het display 0:00 weergegeven.
Page 16
16
www.aeg.com
Alle knoppen zijn inactief behalve de aan/uit knop.
1. Druk op de aan/uit-toets of wacht
totdat de Auto Off-functie het apparaat automatisch heeft uitgeschakeld.

10. AANWIJZINGEN EN TIPS

10.1 Algemene

Volg de onderstaande tips om te zorgen voor optimale schoonmaak- en droogresultaten en ook het milieu te helpen beschermen.
• Verwijder grotere etensresten van de borden en gooi ze in de vuilnisbak.
• Spoel de vaat niet eerst af. Kies indien nodig een programma met voorwasfase.
• Gebruik altijd de hele ruimte van de mandjes.
• Zorg ervoor dat de vaat in de manden elkaar niet raakt of overlapt. Alleen dan kan het water de vaat volledig bereiken en wassen.
• U kunt apart vaatwasmiddel, glansmiddel en zout gebruiken of kiezen voor het gebruik van multitabletten (bijv. ''alles-in-1''). Volg de instructies op de verpakking.
• Kies een programma volgens het type vaat en de mate van vervuiling.
biedt het meest efficiënte
verbruik van water en energie.
10.2 Gebruik van zout,
glansmiddel en vaatwasmiddel
• Gebruik enkel zout, glansmiddel en vaatwasmiddel voor afwasautomaten. Overige producten kunnen het apparaat beschadigen.
• Maar in gebieden met hard en erg hard water raden we het gebruik aan van enkelvoudig vaatwasmiddel (poeder, gel, tabletten zonder extra middelen), met afzonderlijk glansmiddel en zout voor optimale reinigings- en droogresultaten.
• Draai het apparaat minstens eenmaal per maand met een apparaatreiniger die hier speciaal voor bestemd is.
• Vaatwasmiddeltabletten lossen bij korte programma's niet geheel op.
Als u de deur opent voor de activering van Auto Off, wordt het apparaat automatisch uitgeschakeld.
2. Draai de waterkraan dicht.
Om te voorkomen dat vaatwasmiddelresten op het servies achterblijven, raden we u aan om tabletten enkel bij lange programma's te gebruiken.
• Gebruik niet meer dan de juiste hoeveelheid vaatwasmiddel. Zie de instructies van de vaatwasmiddelfabrikant.
10.3 Wat moet u doen als u
wilt stoppen met het gebruik van multitabletten
Doe het volgende voordat u begint met het gebruiken van apart wasmiddel, zout en glansmiddel.
1. Stel het hoogste niveau van de
waterontharder in.
2. Zorg ervoor dat het zout- en het
glansmiddeldoseerbakje gevuld zijn.
3. Start het kortste programma met een
spoelfase. Voeg geen afwasmiddel toe en ruim de mandjes niet in.
4. Als het programma is voltooid,
wijzigt u de waterontharder in de waterhardheid van uw omgeving.
5. Stel de hoeveelheid glansmiddel in.
6. De aanduiding leeg
glansmiddelreservoir activeren.

10.4 De korven inruimen

• Gebruik het apparaat alleen om voorwerpen af te wassen die vaatwasbestendig zijn.
• Doe geen voorwerpen in het apparaat die gemaakt zijn van hout, hoorn, aluminium, tin en koper.
• Plaats geen voorwerpen in het apparaat die water kunnen absorberen (sponzen, keukenhanddoeken).
• Verwijder alle voedselresten van de voorwerpen.
Page 17
C
B
A
NEDERLANDS
17
• Maak aangebrande voedselresten op de voorwerpen zachter.
• Plaats holle voorwerpen (bijv. kopjes, glazen en pannen) met de opening naar beneden.
• Zorg dat serviesgoed en bestek niet in elkaar schuiven. Meng lepels met ander bestek.
• Zorg er voor dat glazen andere glazen niet aanraken.
• Leg kleine voorwerpen in de bestekmand.
• Leg lichte voorwerpen in het bovenrek. Zorg ervoor dat de voorwerpen niet verschuiven.
• Zorg er voor dat de sproeiarm vrij kan ronddraaien voordat u een programma start.
10.5 Voor het starten van een
• De dop van het zoutreservoir goed
• De sproeiarmen niet zijn verstopt.
• Er regenereerzout en glansmiddel is
• De positie van de items in de mandjes
• Het programma geschikt is voor het
• De juiste hoeveelheid afwasmiddel is

10.6 De rekken uitruimen

1. Laat de borden afkoelen voordat u
2. Ruim eerst het onderrek en dan het
programma
Zorg er, voordat u het gekozen programma start, voor dat:
• De filters schoon zijn en correct zijn geplaatst.

11. ONDERHOUD EN REINIGING

WAARSCHUWING!
Schakel het apparaat uit en trek de stekker uit het stopcontact voordat u onderhoudshandelingen verricht.
dicht zit.
toegevoegd (tenzij u gecombineerde afwastabletten gebruikt).
correct is.
type lading en de mate van bevuiling.
gebruikt.
deze uit het apparaat neemt. Hete borden zijn gevoelig voor beschadigingen.
bovenrek uit.
Na voltooiing van het programma kan er zich aan de binnenkant van het apparaat nog water bevinden.
Vuile filters en verstopte sproeiarmen verminderen de wasresultaten. Controleer regelmatig de filters en reinig deze zo nodig.

11.1 De filters reinigen

Het filtersystem bestaat uit 3 delen.
1. Draai de filter (B) linksom en
verwijder het.
Page 18
18
www.aeg.com
7. Plaats de filters (B) en (C) terug.
8. Plaats de filter (B) terug in de platte
filter (A). Rechtsom draaien tot het vastzit.
2. Verwijder de filter (C) uit de filter (B).
3. Verwijder de platte filter (A).
4. Was de filters.
5. Zorg ervoor dat er geen etensresten
of vuil in of rond de rand van de opvangbak zitten.
6. Plaats de platte filter terug (A). Zorg
ervoor dat het goed onder de 2 geleidingen zit.
LET OP!
Een onjuiste plaatsing van de filters kan leiden tot slechte wasresultaten en het apparaat beschadigen.

11.2 De sproeiarmen reinigen

Probeer niet de sproeiarmen te verwijderen. Als etensresten de openingen in de sproeiarmen hebben verstopt, verwijder deze dan met een smal en puntig voorwerp.

11.3 Buitenkant reinigen

• Maak het apparaat schoon met een vochtige, zachte doek.
• Gebruik alleen neutrale schoonmaakmiddelen.
• Gebruik geen schuurmiddelen, schuursponsjes of oplosmiddelen.
Page 19
NEDERLANDS 19
11.4 De binnenkant van de
machine reinigen
• Reinig het apparaat zorgvuldig, inclusief de rubberen afdichting van de deur, met een zachte, vochtige doek.
• Als u regelmatig korte programma's gebruikt dan kunnen er vetresten en kalkaanslag achterblijven in het apparaat. Om dit te voorkomen raden

12. PROBLEEMOPLOSSING

Als het apparaat niet start of stopt tijdens de bediening, kijk dan of u het probleem zelf kunt oplossen met behulp van de informatie in de tabel of door contact op te nemen met een erkend servicecentrum.
WAARSCHUWING!
Niet juist uitgevoerde reparaties kunnen de veiligheid van de gebruiker ernstig in gevaar brengen. Alle reparaties moeten worden uitgevoerd door bevoegd personeel.
we aan minstens 2 keer per maand progamma's met een lange duur te gebruiken.
• Om de prestaties van uw apparaat op en top te houden raden we u aan iedere maand een specifiek schoonmaakproduct voor vaatwasmachines te gebruiken. Volg de instructies op de verpakking van de producten zorgvuldig op.
Bij sommige problemen wordt er op de display een alarmcode weergegeven.
Het merendeel van de problemen die ontstaan kunnen worden opgelost zonder contact op te nemen met een erkend servicecentrum.
Probleem en alarmcode Mogelijke oorzaak en oplossing
U kunt het apparaat niet ac­tiveren.
Het programma begint niet. • Verzeker u ervan dat de klep van het apparaat gesloten
• Verzeker u ervan dat de netstekker is aangesloten op het stopcontact.
• Zorg dat er geen zekering in de zekeringenkast is door­gebrand.
is.
• Als startuitstel is ingesteld, annuleert u deze functie of wacht u tot het einde van het aftellen.
• Het apparaat is begonnen met de oplaadprocedure van de hars in de waterontharder. De duur van de procedu­re is ongeveer 5 minuten.
Page 20
www.aeg.com20
Probleem en alarmcode Mogelijke oorzaak en oplossing
Het apparaat wordt niet ge­vuld met water.
Het display toont of
.
• Verzeker u ervan dat de waterkraan geopend is.
• Ga na of de druk van de watervoorziening niet te laag is. Neem voor deze informatie contactpersoon op met uw plaatselijke waterleidingsbedrijf.
• Verzeker u ervan dat de waterkraan niet verstopt is.
• Controleer of het filter in de toevoerslang niet verstopt is.
• Controleer of er geen knikken of bochten in de water­toevoerslang aanwezig zijn.
Het water niet wordt afge­pompt uit de machine. Op het display verschijnt
.
• Verzeker u ervan dat de gootsteenafvoer niet verstopt is.
• Controleer of het filter in de afvoerslang niet verstopt is.
• Controleer of het binnenfiltersysteem niet verstopt is.
• Verzeker u ervan dat de aftapslang geen knikken of bochten heeft.
De anti-overstromingsbevei­liging is ingeschakeld.
• Draai de waterkraan dicht en neem contact op met de service-afdeling.
Op het display verschijnt
.
Het apparaat stopt en start meerdere keren tijdens de
• Dat is normaal. Het voorziet in optimale reinigingsresul­taten en energiebesparing.
werking.
Het programma duurt te lang.
• Kies de optie TimeSaver om de programmaduur te ver­korten.
• Als de optie uitgestelde start is ingesteld, annuleert u deze functie of wacht u tot het aftellen is voltooid.
De resterende duur in het
• Dit is geen storing. Het apparaat werkt goed.
display wordt verlengd en schakelt bijna naar het eind van de programmaduur.
Kleine lekkage uit de deur van het apparaat.
• Het apparaat staat niet waterpas. Draai aan de verstel­bare pootjes (indien van toepassing).
• De deur van het apparaat is niet gecentreerd op de kuip. Verstel de achterpoot (indien van toepassing).
De deur van het apparaat sluit moeilijk.
• Het apparaat staat niet waterpas. Draai aan de verstel­bare pootjes (indien van toepassing).
• Delen van het serviesgoed steken uit de korven.
Ratelende / kloppende ge­luiden vanuit het apparaat.
• Het serviesgoed is niet juist in de korven gerangschikt. Raadpleeg de folder voor het laden van de korven.
• Zorg ervoor dat de sproeiarmen vrij kunnen ronddraai­en.
Page 21
Probleem en alarmcode Mogelijke oorzaak en oplossing
Het apparaat maakt kortslui­ting.
• De stroomsterkte is onvoldoende om alle tegelijk wer­kende apparaten van stroom te voorzien. Controleer de stroomsterkte van het stopcontact en het vermogen op de meter, of zet één van de in gebruik zijnde apparaten uit.
• Interne elektrische storing van het apparaat. Neem con­tact op met de klantenservice.
NEDERLANDS 21
Raadpleeg "Voor het eerste gebruik", "Dagelijks gebruik", of "Aanwijzingen en tips" voor andere
mogelijke oorzaken.
neemt u contact op met onze klantenservice.
Voor alarmcodes die niet in de tabel vermeld zijn, neemt u contact op met de service-afdeling.
Schakel het apparaat na controle aan en uit. Als het probleem opnieuw optreedt,

12.1 De was- en droogresultaten zijn niet naar tevredenheid

Probleem Mogelijke oorzaak en oplossing
Slechte wasresultaten. • Raadpleeg "Dagelijks gebruik", "Aanwijzingen en
tips" en de folder voor het laden van de korf.
• Gebruik intensievere wasprogramma´s.
• Maak de inspuiters van de sproeiarm en het filter
schoon. Zie "Onderhoud en reiniging".
Slechte droogresultaten. • Serviesgoed heeft te lang in het gesloten apparaat
gestaan.
• Het glansmiddel is op of de dosering van glansmiddel is niet voldoende. Stel de dosering van het glansmid­del in op een hogere stand.
• Plastic voorwerpen moeten mogelijk met een doek worden afgedroogd.
• Activeer voor de beste droogprestatie de optie Xtra­Dry en stel AirDry in.
• We raden aan altijd glansmiddel te gebruiken, zelfs in combinatie met wastabletten.
Witte strepen of een blauwe waas op glazen en servies­goed.
Vlekken en opgedroogde wa­tervlekken op glazen en ser­vies.
• De vrijgegeven hoeveelheid glansmiddel is te hoog. Zet de dosering van het glansmiddel op een lagere stand.
• Er is te veel vaatwasmiddel gebruikt.
• De vrijgegeven hoeveelheid glansmiddel is te laag. Zet de dosering van het glansmiddel op een hogere stand.
• De kwaliteit van het glansmiddel kan de oorzaak zijn.
Page 22
www.aeg.com22
Probleem Mogelijke oorzaak en oplossing
Het serviesgoed is nat. • Activeer voor de beste droogprestatie de optie Xtra-
Dry en stel AirDry in.
• Het programma heeft geen droogfase of heeft een droogfase met lage temperatuur.
• Het glansmiddeldoseerbakje is leeg.
• De kwaliteit van het glansmiddel kan de oorzaak zijn.
• De kwaliteit van de multitabletten kan de oorzaak zijn. Probeer een ander merk of activeer het glansmiddel­doseerbakje en gebruik het glansmiddel samen met de multitabletten.
De binnenkant van het appa­raat is nat.
• Dit is geen fout van het apparaat. Het wordt veroor­zaakt door de vochtigheid in de lucht die tegen de wanden condenseert.
Opvallend veel schuim tijdens het wassen.
• Gebruik alleen wasmiddel voor afwasautomaten.
• Het glansmiddeldoseerbakje is lek. Neem contact op met de klantenservice.
Roestresten op bestek. • Er wordt voor het wassen teveel zout in het water ge-
bruikt. Zie 'De waterontharder instellen'.
• Zilver en roestvrijstalen bestek zijn samen geplaatst. Zet zilveren en roestvrijstalen voorwerpen niet dicht bij elkaar.
Er bevinden zich aan het einde van het programma resten van vaatwasmiddel in het vaatwas­middeldoseerbakje.
• De vaatwastablet raakte klem in het vaatwasmiddeldo­seerbakje en is daardoor niet volledig weggespoeld door het water.
• Het water kan het vaatwasmiddel niet uit het vaatwas­middeldoseerbakje spoelen. Zorg ervoor dat de bo­venste sproeiarm niet geblokkeerd of verstopt is.
• Zorg dat voorwerpen in de rekken het openen van het klepje van het afwasmiddeldoseerbakje niet kunnen belemmeren.
Geuren in het apparaat. • Raadpleeg "Reiniging binnenkant".
Kalkresten op het servies­goed, op de kuip en aan de binnenkant van de deur.
• Het zoutniveau is laag, controleer de bijvulaanduiding.
• De dop van het zoutreservoir zit los.
• U heeft hard kraanwater. Zie 'De waterontharder in- stellen'.
• Gebruik zelfs met multitabletten zout en stel de water­ontharder in. Zie 'De waterontharder instellen'.
• Indien de kalkaanslag blijft bestaan, reinigt u het ap­paraat met reinigingsmiddelen die hier speciaal voor zijn bestemd.
• Probeer een ander wasmiddel.
• Neem contact op met de wasmiddelfabrikant.
Page 23
Probleem Mogelijke oorzaak en oplossing
Dof, ontkleurd of afgeschil­verd serviesgoed.
• Zorg dat alleen vaatwasmachinebestendige voorwer­pen in het apparaat worden gewassen.
• Laad de korf voorzichtig in en uit. Raadpleeg de folder voor het laden van de korven.
• Leg tere voorwerpen in de bovenkorf.
Raadpleeg "Voor het
eerste gebruik", "Dagelijks gebruik" of "Aanwijzingen en tips" voor mogelijke
andere oorzaken.

13. PRODUCTINFORMATIEBLAD

Handelsmerk AEG
Model FSB52610Z 911536290,
Nominale capaciteit (standaardcouverts) 13
Energie-efficiëntieklasse A++
Energieverbruik in kWh per jaar, gebaseerd op 280 standaardcycli met toevoer van koud water en het ver­bruik in de energiebesparende standen. Het werkelijke energieverbruik wordt bepaald door de wijze waarop het apparaat wordt gebruikt.
Energieverbruik van standaard reinigingscyclus (kWh) 0.920
Het elektriciteitsverbruik in de uit-stand (W) 0.50
Het elektriciteitsverbruik in de sluimerstand (W) 5.0
Waterverbruik in liter per jaar, op basis van 280 stan­daard reinigingscycli. Het werkelijke waterverbruik hangt af van hoe het apparaat wordt gebruikt
Droogefficiencyklasse op een schaal van G (minst effici­ent) tot A (meest efficiënt)
Het "standaardprogramma" de standaardcyclus is waarop de informatie op het etiket en de productkaart betrekking heeft, dat dit programma geschikt is voor het wassen van normaal bevuild tafelgerei, en dat het het meest efficiënte programma is wat het gecombi­neerd energie- en waterverbruik betreft Het wordt aan­geduid als "Eco" -programma.
Programmatijd van standaard reinigingscyclus (min) 237
NEDERLANDS 23
911536388
262
2775
A
Page 24
www.aeg.com24
De duur van de sluimerstand (min) 5
Geluidsvermogensniveau (db(A) re 1pW) 44
Ingebouwde apparatuur J/N Ja

14. EXTRA TECHNISCHE INFORMATIE

Afmetingen Breedte / hoogte / diepte (mm) 596 / 818 - 898 / 550
Elektrische aansluiting
Watertoevoerdruk Min. / max.
Watertoevoer
1)
Zie het typeplaatje voor andere waarden.
2)
Als het hete water door een alternatieve, milieuvriendelijkere energiebron geproduceerd wordt (bijv.
zonnepanelen), gebruik dan een heetwatervoorziening om het energieverbruik te verminderen.
1)
Voltage (V) 220 - 240
Frequentie (Hz) 50
bar (MPa)
Koud water of warm water
2)
15. MILIEUBESCHERMING
0.5 (0.05) / 8 (0.8)
max. 60
Recycleer de materialen met het symbool . Gooi de verpakking in een
geschikte afvalcontainer om het te recycleren. Bescherm het milieu en de volksgezondheid en recycleer op een correcte manier het afval van elektrische en elektronische apparaten. Gooi
apparaten gemarkeerd met het symbool
niet weg met het huishoudelijk afval. Breng het product naar het milieustation bij u in de buurt of neem contact op met de gemeente.
Page 25

CONTENTS

5. PROGRAMMES..........................................................................................................30
6. SETTINGS...................................................................................................................32
7. OPTIONS....................................................................................................................34
8. BEFORE FIRST USE................................................................................................... 35
9. DAILY USE..................................................................................................................37
10. HINTS AND TIPS..................................................................................................... 38
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler - features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
ENGLISH
25
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.
Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.

SAFETY INFORMATION

1.
Before the installation and use of the appliance, carefully read the supplied instructions. The
Page 26
26
www.aeg.com
manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safety

This appliance can be used by children aged from 8
years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously supervised.
Do not let children play with the appliance.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.

General Safety

1.2
This appliance is intended to be used in household
and similar applications such as:
farm houses; staff kitchen areas in shops, offices
and other working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments.
Do not change the specification of this appliance.
The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
Follow the maximum number of 13 place settings.
Page 27
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down.
Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must not be reused.

2. SAFETY INSTRUCTIONS

ENGLISH
27

2.1 Installation

WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not use the appliance before installing it in the built-in structure due to safety manner.
• Follow the installation instructions supplied with the appliance.
• Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
• Do not install or use the appliance where the temperature is less than 0 °C.
• Install the appliance in a safe and suitable place that meets installation requirements.

2.2 Electrical connection

WARNING!
Risk of fire and electric shock.
• The appliance must be earthed.
• Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug and to the mains cable. Should the mains cable need to be replaced, this must be carried out by our Authorised Service Centre.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
Page 28
28
www.aeg.com
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance is fitted with a 13 A mains plug. If it is necessary to change the mains plug fuse, use only a 13 A ASTA (BS 1362) fuse (UK and Ireland only).

2.3 Water connection

• Do not cause damage to the water hoses.
• Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.
• Ensure that there are no visible water leaks during and after the first use of the appliance.
• The water inlet hose has a safety valve and a sheath with an inner mains cable.
mains socket. Contact the Authorised Service Centre to replace the water inlet hose.

2.4 Use

• Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
• Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging.
• Do not drink and play with the water in the appliance.
• Do not remove the dishes from the appliance until the programme is complete. Some detergent may remain on the dishes.
• Do not sit or stand on the open door of the appliance.
• The appliance can release hot steam if you open the door while a programme operates.

2.5 Service

• To repair the appliance contact the Authorised Service Centre.
• Use original spare parts only.

2.6 Disposal

WARNING!
Dangerous voltage.
• If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
Page 29

3. PRODUCT DESCRIPTION

4
3
7
9
8
10
56
11
1
2
ENGLISH 29
Upper spray arm
1
Lower spray arm
2
Filters
3
Rating plate
4
Salt container
5
Air vent
6

3.1 Beam-on-Floor

The Beam-on-Floor is a light that is displayed on the floor below the appliance door.
• When the programme starts, a red light comes on and stays on for the duration of the programme.
• When the programme is completed, a green light comes on.
• When the appliance has a malfunction, the red light flashes.
Rinse aid dispenser
7
Detergent dispenser
8
Cutlery basket
9
Lower basket
10
Upper basket
11
The Beam-on-Floor is off when the appliance is deactivated.
When AirDry is activated during the drying phase, the projection on the floor may not be completely visible. To see if the cycle has ended, check the control panel.
Page 30
1 2 93 4 5 6 7 8
www.aeg.com30

4. CONTROL PANEL

On/off button
1
Display
2
Delay button
3
Programme button (up)
4
Programme button (down)
5

4.1 Indicators

Indicator Description
Rinse aid indicator. It is always off while the programme operates.
Salt indicator. It is always off while the programme operates.

5. PROGRAMMES

The numbering of the programmes in the table (P1, P2, etc.) reflects their sequence on the control panel.
Programme Degree of soil
Type of load
P1
1)
P2
2)
P3 • Heavy soil
• Normal soil
• Crockery and
• All
• Crockery, cut-
• Crockery, cut-
cutlery
lery, pots and pans
lery, pots and pans
TimeSaver button
6
XtraDry button
7
RESET button
8
Indicators
9
The order of the programmes in the table may not reflect their sequence on the control panel.
Programme phases Options
• Prewash
• Wash 50 °C
• Rinses
• Dry
• Prewash
• Wash from 45 °C to 70 °C
• Rinses
• Dry
• Prewash
• Wash 70 °C
• Rinses
• Dry
• TimeSaver
• XtraDry
• XtraDry
• TimeSaver
• XtraDry
Page 31
ENGLISH 31
Programme Degree of soil
Type of load
P4
3)
P5 • Normal or light
1)
This programme offers the most efficient use of water and energy consumption for crockery and cut-
lery with normal soil. This is the standard programme for test institutes.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad-
justs the temperature and the quantity of water, the energy consumption and the programme duration.
3)
With this programme, you can wash a load with fresh soil. It gives good washing results in a short time.
• Fresh soil
• Crockery and cutlery
soil
• Delicate crock­ery and glass­ware
Programme phases Options
• Wash 60 °C or 65 °C
• Rinses
• Wash 45 °C
• Rinses
• Dry
• XtraDry
• XtraDry

5.1 Consumption values

Programme
P1 9.9 0.920 237
P2 6 - 12 0.6 - 1.5 44 - 160
P3 14 - 15 1.5 - 1.7 155 - 171
1)
Water
(l)
Energy
(kWh)
Duration
(min)
P4 10 0.8 30
P5 13 - 14 1.0 - 1.1 75 - 85
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.

5.2 Information for test institutes

To receive the necessary information for conducting performance tests (e.g. according to EN60436), send an email to:
In your request please include the product number code (PNC) found on the rating plate.
For any other questions regarding your dishwasher please refer to the service book provided with your appliance.
info.test@dishwasher-production.com
Page 32
www.aeg.com32

6. SETTINGS

6.1 Programme selection
mode and user mode
When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to the water hardness.
• Activation or deactivation of the acoustic signal for the end of a programme.
• Activation or deactivation of the rinse aid empty notification.
• Activation or deactivation of AirDry.
As the appliance stores the saved settings, there is no need to configure it before every cycle.

How to set the programme selection mode

The appliance is in programme selection mode when the display shows the programme number P1.
After activation, the appliance is in programme selection mode by default. If not, set the programme selection mode the following way:
Press and hold RESET until the appliance is in programme selection mode.
To enter user mode, press and hold simultaneously and until the indicators , , and flash and
the display is blank.

6.2 The water softener

The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance.
The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.
The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results.
Softening hard water increases the consumption of water and energy as well as the programme duration. The higher the level of water softener, the higher the consumption and the longer the duration.

How to enter user mode

Make sure the appliance is in programme selection mode.
Water hardness
German de-
grees (°dH)
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
French degrees
(°fH)
mmol / l Clarke de-
grees
Water softener lev-
el
Page 33
ENGLISH
33
German de­grees (°dH)
19 - 22 33 - 39 3.3 - 3.9 23 - 27
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1)
Factory setting.
2)
Do not use salt at this level.
Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active.
Multi-tabs containing salt are not effective enough to soften hard water.

How to set the water softener level

Make sure the appliance is in user mode.
1. Press
• The indicators , and are off.
• The indicator
• The display shows the current setting: e.g. = level 5.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm
the setting.
French degrees
.
(°fH)
still flashes.
mmol / l Clarke de-
grees
notification for refilling rinse aid. However, for best drying performance, always use rinse aid.
If standard detergent or multi-tablets without rinse aid are used, activate the notification to keep the rinse aid refill indicator active.

How to deactivate the rinse aid empty notification

Make sure the appliance is in user mode.
1. Press
• The indicators , and are
• The indicator
• The display shows the current
2. Press
.
off.
setting:
= the rinse aid empty notification is activated (factory setting).
to change the setting.
= the rinse aid empty notification is

6.3 The rinse aid empty notification

The rinse aid helps to dry the dishes without streaks and stains.
The rinse aid is automatically released during the hot rinse phase.
When rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse aid. If the drying results are satisfactory while using multi-tablets only, it is possible to deactivate the
deactivated.
3. Press on/off to confirm the setting.

6.4 Acoustic signals

Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to deactivate these acoustic signals.
There is also an acoustic signal that sounds when the programme is completed. By default this acoustic
Water softener lev-
el
1)
5
2)
1
still flashes.
Page 34
www.aeg.com34
signal is deactivated but it is possible to activate it.

How to activate the acoustic signal for the end of programme

Make sure the appliance is in user mode.
1. Press .
• The indicators off.
• The indicator still flashes.
• The display shows the current setting:
= Acoustic signal off. –
= Acoustic signal on.
2. Press
3. Press on/off to confirm the setting.
to change the setting.
, and are

6.5 AirDry

AirDry improves the drying results with less energy consumption.
During the drying phase, the door opens automatically and remains ajar.
CAUTION!
Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance.
AirDry is automatically activated with all programmes excluding (if
applicable). To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the appliance, it is advised to deactivate AirDry as opening the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.
1. Press .
• The indicators , and are off.
• The indicator
• The display shows the current setting: = AirDry activated.
2. Press to change the setting:
= AirDry deactivated.
3. Press on/off to confirm the setting.
still flashes.

OPTIONS

7.
Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running.
Not all options are compatible with each other. If you select non compatible options, the appliance automatically deactivates one or more of them. Only the indicators of the still active options are on.
Page 35
ENGLISH
35
If an option is not applicable to a programme, the related indicator is off or it flashes quickly for a few seconds and then goes out.
Activating options can affect the water and energy consumption as well as the programme duration.

7.1 XtraDry

Activate this option to boost the drying performance. With XtraDry on, the duration of some programmes, water consumption and the last rinse temperature can be affected.
XtraDry is a permanent option for all programmes other than and
need not to be selected at every cycle. In the other programmes the setting of
XtraDry is permanent and it is automatically used in next cycles. This configuration can be changed at any time.
Every time is activated, XtraDry is off and needs to be chosen manually.
Activating XtraDry deactivates TimeSaver and vice versa.

How to activate XtraDry

1. Press simultaneously and . The indicator
The display shows the updated programme duration.
2. Press . The related indicator is on. The display shows the updated programme duration.
is on.

7.2 TimeSaver

This option increases the pressure and the temperature of the water. The washing and the drying phases are shorter.
The total programme duration decreases by approximately 50%.
The washing results are the same as with the normal programme duration. The drying results can decrease.

How to activate TimeSaver

Press . The related indicator is on. The display shows the updated programme duration.
8.

BEFORE FIRST USE

1. Make sure that the current level of the water softener agrees with the hardness of the water supply. If not, adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be inside the appliance. Do not use detergent and do not put dishes in the baskets.
After starting the programme, the appliance recharges the resin in the water softener for up to 5 minutes. The washing phase starts only after this procedure is complete. The procedure is repeated periodically.

8.1 The salt container

CAUTION!
Use rough salt designed for dishwashers only. Fine salt increases the risk of corrosion.
The salt is used to recharge the resin in the water softener and to assure good washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
Page 36
A
B
D
C
M
A
X
1
2
3
4
+
-
A
B
D
C
www.aeg.com36
3. Fill the salt container with 1 kg of salt
(until it is full).
4. Carefully shake the funnel by its
handle to get the last granules inside.
5. Remove the salt around the opening
of the salt container.
6. Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion.

8.2 How to fill the rinse aid dispenser

CAUTION!
Only use rinse aid specifically designed for dishwashers.
1. Press the release button (D) to open the lid (C).
2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam.
4. Close the lid. Make sure that the release button locks into position.
You can turn the selector of the released quantity (B) between position 1 (lowest quantity) and position 4 or 6 (highest quantity).
Page 37

9. DAILY USE

30
20
A BD
C
20
30
B
A D
C
ENGLISH
37
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the appliance is in programme selection mode.
• If the salt indicator is on, fill the salt container.
• If the rinse aid indicator is on, fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of soil.

9.1 Using the detergent

9.2 Setting and starting a
programme

The Auto Off function

This function decreases energy consumption by deactivating automatically the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.

Starting a programme

Keep the appliance door ajar.
1.
2. Press the on/off button to activate
the appliance. Make sure that the appliance is in programme selection mode.
3. Press repeatedly or until the
display shows the number of the chosen programme. The display shows the programme number for approximately 3 seconds and then shows the programme duration.
4. Set the applicable options.
5. Close the appliance door to start the
programme.
1. Press the release button (B) to open the lid (C).
2. Put the detergent, in powder or tablets, in the compartment (A).
3. If the programme has a prewash phase, put a small quantity of detergent in the compartment (D).
4. Close the lid. Make sure that the release button locks into position.

Starting a programme with delay start

1. Set a programme.
2. Press again and again until the
display shows the delay time you want to set (from 1 to 24 hours).
The delay indicator comes on.
3. Close the appliance door to start the
countdown. While a countdown is running it is possible to increase the delay time but not to change the selection of the programme and options. When the countdown is completed, the programme starts.
Page 38
38
www.aeg.com

Opening the door while the appliance operates

Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption.
If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function.
Do not try to close the appliance door within 2 minutes after AirDry automatically opens it, as this may cause damage to the appliance. If, afterwards, the door is closed for another 3 minutes, the running programme ends.

Cancelling the delay start while the countdown operates

When you cancel the delay start you have to set the programme and options again.
Press and hold RESET until the appliance is in programme selection mode.

Cancelling the programme

Press and hold RESET until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new programme.

End of the programme

When the programme is completed the display shows 0:00.
All buttons are inactive except for the on/off button.
1. Press the on/off button or wait for
the Auto Off function to automatically deactivate the appliance. If you open the door before the activation of Auto Off, the appliance is automatically deactivated.
2. Close the water tap.

10. HINTS AND TIPS

10.1 General

Follow the hints below to ensure optimal cleaning and drying results in daily use and to help you protect the environment.
• Remove larger residues of food from the dishes into the waste bin.
• Do not pre-rinse dishes by hand. When needed, select a programme with a prewash phase.
• Always use the whole space of the baskets.
• Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes.
• You can use dishwasher detergent, rinse aid and salt separately or you can use the multi-tablets (e.g. ''All in 1''). Follow the instructions on the packaging.
• Select a programme according to the type of load and the degree of soil.
offers the most efficient use of
water and energy consumption.
10.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent for dishwasher. Other products can cause damage to the appliance.
Page 39
ENGLISH 39
• In areas with hard and very hard water we recommend to use plain dishwasher detergent (powder, gel, tablets containing no additional agents), rinse aid and salt separately for optimal cleaning and drying results.
• At least once a month run the appliance with the use of appliance cleaner which is particularly suitable for this purpose.
• Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use the tablets with long programmes.
• Do not use more than the correct quantity of detergent. Refer to the instructions on the detergent packaging.
10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately detergent, salt and rinse aid do the following procedure.
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent and do not load the baskets.
4. When the programme is completed,
adjust the water softener according to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
6. Activate the rinse aid empty
notification.

10.4 Loading the baskets

• Only use the appliance to wash items that are dishwasher-safe.
• Do not put in the appliance items made of wood, horn, aluminium, pewter and copper.
• Do not put in the appliance items that can absorb water (sponges, household cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food on the items.
• Put hollow items (cups, glasses and pans) with the opening down.
• Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery.
• Make sure that glasses do not touch other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket. Make sure that the items do not move.
• Make sure that the spray arm can move freely before you start a programme.
10.5 Before starting a
programme
Before you start the selected programme, make sure that:
• The filters are clean and correctly installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid (unless you use multi-tablets).
• The arrangement of the items in the baskets is correct.
• The programme is suitable to the type of load and the degree of soil.
• The correct quantity of detergent is used.

10.6 Unloading the baskets

1. Let the tableware cool down before
you remove it from the appliance. Hot items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
After the programme is completed, water can still remain on the inside surfaces of the appliance.
Page 40
C
B
A
www.aeg.com
40

11. CARE AND CLEANING

WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket.
Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them.

11.1 Cleaning the filters

The filter system is made of 3 parts.
4. Wash the filters.
5. Make sure that there are no residues
of food or soil in or around the edge of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly positioned under the 2 guides.
1. Turn the filter (B) counterclockwise
and remove it.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
Page 41
CAUTION!
An incorrect position of the filters can cause bad washing results and damage to the appliance.

11.2 Cleaning the spray arms

Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.

12. TROUBLESHOOTING

ENGLISH 41

11.3 External cleaning

• Clean the appliance with a moist soft cloth.
• Only use neutral detergents.
• Do not use abrasive products, abrasive cleaning pads or solvents.

11.4 Internal cleaning

• Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
• If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month.
• To maintain the performance of your appliance at its best, we recommend to use monthly a specific cleaning product for dishwashers. Follow carefully the instructions on the packaging of the product.
If the appliance does not start or it stops during operation, first check if you can solve the problem by yourself with the help of the information in the table or contact an Authorised Service Centre.
WARNING!
Repairs not properly done may result in serious risk to the safety of the user. Any repairs must be performed by qualified personnel.
Problem and alarm code Possible cause and solution
You cannot activate the ap­pliance.
• Make sure that the mains plug is connected to the mains socket.
• Make sure that there is no damaged fuse in the fuse box.
With some problems, the display shows an alarm code.
The majority of problems that can occur can be solved without the need to contact an Authorised Service Centre.
Page 42
www.aeg.com42
Problem and alarm code Possible cause and solution
The program does not start. • Make sure that the appliance door is closed.
• If the delay start is set, cancel the setting or wait for the end of the countdown.
• The appliance has started the procedure to recharge the resin inside the water softener. The duration of the procedure is approximately 5 minutes.
The appliance does not fill with water.
The display shows or
.
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter in the inlet hose is not clogged.
• Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the water.
The display shows .
• Make sure that the sink spigot is not clogged.
• Make sure that the filter in the outlet hose is not clog­ged.
• Make sure that the interior filter system is not clogged.
• Make sure that the drain hose has no kinks or bends.
The anti-flood device is on. The display shows .
The appliance stops and starts more times during op-
• Close the water tap and contact an Authorised Service Centre.
• It is normal. It provides optimal cleaning results and en­ergy savings.
eration.
The program lasts too long. • Select the TimeSaver option to shorten the program
time.
• If the delayed start option is set, cancel the delay setting or wait for the end of the countdown.
The remaining time in the
• This is not a defect. The appliance is working correctly.
display increases and skips nearly to the end of program time.
Small leak from the appli­ance door.
• The appliance is not levelled. Loosen or tighten the ad­justable feet (if applicable).
• The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
The appliance door is diffi­cult to close.
• The appliance is not levelled. Loosen or tighten the ad­justable feet (if applicable).
• Parts of the tableware are protruding from the baskets.
Rattling/knocking sounds from inside the appliance.
• The tableware is not properly arranged in the baskets. Refer to basket loading leaflet.
• Make sure that the spray arms can rotate freely.
Page 43
Problem and alarm code Possible cause and solution
The appliance trips the cir­cuit-beaker.
• The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the applian­ces in use.
• Internal electrical fault of the appliance. Contact an Au­thorised Service Centre.
ENGLISH 43
Refer to "Before first use", "Daily use", or "Hints and tips" for other possible
causes.
the problem occurs again, contact an Authorised Service Centre.
For alarm codes not described in the table, contact an Authorised Service Centre.
Once you have checked the appliance, deactivate and activate the appliance. If

12.1 The washing and drying results are not satisfactory

Problem Possible cause and solution
Poor washing results. • Refer to "Daily use", "Hints and tips" and basket
loading leaflet.
• Use more intensive washing programmes.
• Clean spray arm jets and filter. Refer to "Care and Cleaning".
Poor drying results. • Tableware has been left for too long inside a closed
appliance.
• There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
• Plastic items may need to be towel dried.
• For the best drying performance activate the option XtraDry and set AirDry.
• We recommend to always use rinse aid, even in com­bination with multi-tablets.
There are whitish streaks or bluish layers on glasses and dishes.
There are stains and dry water drops on glasses and dishes.
• The release quantity of rinse aid is too much. Adjust the rinse aid level to a lower level.
• The quantity of detergent is too much.
• The released quantity of rinse aid is not sufficient. Ad­just the rinse aid level to a higher level.
• The quality of the rinse aid can be the cause.
Page 44
www.aeg.com44
Problem Possible cause and solution
The dishes are wet. • For the best drying performance activate the option
XtraDry and set AirDry .
• The programme does not have a drying phase or has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid and multi-tablets together.
The interior of the appliance is wet.
• This is not a defect of the appliance. it is caused by the humidity in the air that condenses on the walls.
Unusual foam during washing. • Use the detergent for dishwashers only.
• There is a leak in the rinse aid dispenser. Contact an Authorised Service Centre.
Traces of rust on cutlery. • There is too much salt in the water used for washing.
Refer to "The water softener".
• Silver and stainless steel cutlery were placed together. Avoid to put silver and stainless steel items close to­gether.
There are residues of deter­gent in the dispenser at the end of the programme.
• The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water.
• Water cannot wash away the detergent from the dis­penser. Make sure that the spray arm is not blocked or clogged.
• Make sure that items in the baskets do not impede the lid of the detergent dispenser from opening.
Odours inside the appliance. • Refer to "Internal cleaning".
Limescale deposits on the ta­bleware, on the tub and on the inside of the door.
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to "The water softener".
• Even using multi-functional tabs use salt and set re­generation of the water softener. Refer to "The water softener".
• If lime scale deposits still remain, clean the appliance with appliance cleaners which are particularly suitable for this purpose.
• Try different detergent.
• Contact the detergent manufacturer.
Dull, discoloured or chipped tableware.
• Make sure that only dishwasher-safe items are washed in the appliance.
• Load and unload the basket carefully. Refer to basket loading leaflet.
• Place delicate items in the upper basket.
Page 45
Refer to "Before first use",
"Daily use" or "Hints and tips" for other possible
causes.

13. PRODUCT INFORMATION SHEET

Trade Mark AEG
Model FSB52610Z 911536290,
Rated capacity (standard place settings) 13
Energy efficiency class A++
Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes. The actual ener­gy consumption will depend on how the appliance is used.
Energy consumption of standard cleaning cycle (kWh) 0.920
Power consumption in off mode (W) 0.50
Power consumption in left-on mode (W) 5.0
Water consumption in litres per year, based on 280 standard cleaning cycles. The actual water consumption will depend on how the appliance is used
Drying efficiency class on a scale from G (least efficient) to A (most efficient)
The ‘standard programme’ is the standard cleaning cy­cle to which the information in the label and the fiche relates. This programme is suitable to clean normally soiled tableware and is the most efficient programme in terms of combined energy and water consumption. It is indicated as "Eco" programme.
Programme time of standard cleaning cycle (min) 237
Duration of the left-on mode (min) 5
Sound power level (db(A) re 1pW) 44
Built in appliance Y/N Yes
ENGLISH 45
911536388
262
2775
A

14. ADDITIONAL TECHNICAL INFORMATION

Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550
Page 46
46
www.aeg.com
Electrical connection
1)
Voltage (V) 220 - 240
Frequency (Hz) 50
Water supply pressure Min. / max.
bar (MPa)
Water supply
1)
Refer to the rating plate for other values.
2)
If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to
decrease energy consumption.
Cold water or hot water
15. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
0.5 (0.05) / 8 (0.8)
2)
max 60 °C
*
Page 47
ENGLISH 47
Page 48
www.aeg.com/shop
156910625-A-412019
Loading...