Networks, workstations, intranet and internet servers,
telecommunications applications and other company
applications must be permanently available. AEG
Protect 3.M 2.0 is the modular UPS solution for IT and
telecommunications. Modern data centers require the
highest levels of efficiency, reliability and flexibility.
Protect 3.M 2.0 provides a technically convincing
and reliable solution to this requirement that can be
modularly adapted to any increasing power demand.
An extension can be made at any time during
operation. The flexible redundancy concept ensures a
steady power supply to any connected devices.
Lower operating costs for energy and cooling with high
efficiency and fast module replacement in the event of power
failure, reduce operational costs and ensure an optimal price
vs. performance ratio for the Protect 3.M 2.0 UPS solution.
Key features
»Modular design allows for flexible adaption
to the current power demand
»Up to 95 % efficiency in “online double conversion”
mode, up to 98 % in ECO mode
»IGBT technology, input power factor >0.99
»Low phase effect <3 %
»Redundant control and n+x parallel
redundancy for high availability
»Parallel operation of up to 4 UPS units (max. 480 kVA)
»Module installation and removal during operation
(”hot swappable”)
»Graphical LCD screen
»Built-in manual bypass, separate input for bypass power
»Load dependent fan speed
»Small footprint
2
Protect 3.M 2.0
System status LEDs
• Normal
• Battery
• Bypass
• Error
Power outages can
lead to significant
financial loss
Almost all labor and
production processes today
are based on high capacity
data and IT infrastructure.
Power outages or voltage
fluctuations that lead to
systems failure end almost
always with disrupted
operations, loss of production
and, at worst, irretrievable data
loss.
Your important IT infrastructure
must be permanently available
and protected against power
disturbances of all kinds.
Through the use of VFI
(conversion) technology,
Protect 3.M 2.0 reliably protects
your systems against power
outages and network
disruptions and ensures the
value of your business.
Functional buttons ON/OFF
Front-EPO
Modularity provides
safety reserves and
flexibility
Protect 3.M 2.0 is an
uninterruptible power supply
of the highest reliability.
With increasing demands on
performance, the compact
modular design adapts
the permitted UPS power
according to your current
power needs. This can be done
without additional installation
costs since the power modules
can be easily inserted and are
automatically recognized by
the system (“hot swappable”).
No additional connections are
required for this operation.
Dynamic redundancy
An automatic load balancing
to all modules within an
appropriately designed system
delivers N+x redundancy
without the requirement for
any configuration changes or
increases to load capacity.
High efficiency lowers
operating costs and
CO2 emissions
Protect 3.M 2.0 is based
on high efficiency IGBT
technology. This provides
an efficiency of up to 95 %
in double conversion mode.
With a 35 % loading, the UPS
still maintains an efficiency
of 94 %. In addition to the
lowering of power loss
unwanted generation of
heat is also reduced, thereby
reducing air conditioning
requirements. All of this leads
to significant cost savings and
a reduction in CO
Input power factor 1.0
100 % active power from the
UPS reduces the generator
specification and consequent
installation cost increases.
emissions.
2
Classification VFI SS 111 acc. to IEC 62040-3Protec t 3.M 2.0
Power type rating20 k VA40 kVA60 k VA80 kVA100 kVA120 kVA
16 kW32 kW48 kW64 kW80 kW96 kW
SYSTEM
Nominal input current29 A59 A88 A117 A145 A172 A
Efficiency (typical)95 %
Efficiency in ECO mode98 %
Waste heat from power (typical)1.3 kW2.6 kW3.9 kW5.2 kW6.5 kW7.8 kW
Admissible overload125 % for 10 min., 150 % for 60 s
Crest factor2.7 : 1
Max. short circuit current>270 % of the rated current
Admissible power factor0.1 inductive to 0.1 capacitive
BATTERY
Rated voltage±240 V DC
Max. charging power5 A10 A15 A20 A25 A30 A
Charging principleLoad switching per power module
Autonomy timeSelectable over external battery cabinet
STATIC BYPASS
Nominal voltage3 x 400 V (380, 415 V adjustable), 3 phase + neutral
Frequency50 Hz / 60 Hz (adjustable)
Synchronization range±0.1 – ±5 % (adjustable)
Transfer time at mains outage0 ms (without interruption)
Admissible overload175 % for 10 ms
GENERAL DATA
Parallel modeUp to 4 UPS (central battery possible)
Audible noise62 – 69 dB(A) dependent on equipment installed and load state
Operating temperature range / humidity0 – 40 °C / <95 % (without condensation)
ProtectionIP20
ColorRAL 7035
Cable entryUnderside
Environmental conditionsFree from corrosive air and conductive dust
COMMUNICATION
Display320 x 240 graphical LCD display
Alarm signalsAcoustic and visual
InterfacesRemote signal contact, RS232, 2 x communication slots for SNMP / Modbus / additional relay cards
DIMENSIONS
Dimensions approx. D x W x H (mm)910 x 520 x 1165975 x 520 x 1655
Footprint (m²)0.470.51
Weight approx.139 kg204 kg
Weight approx. (incl. module)169 kg199 kg229 kg259 kg354 kg384 kg
1) by THDv ≤2 %
3
Protect
3.M 2.0
Intelligent
communication
Protect 3.M 2.0 contains a
powerful communications
module that readily supplies
all relevant information
(measurements, alarms
and error messages). All
information is supplied via
an easy to use LCD screen
additional remote signal
contacts, MODBUS
extension card and SNMP
adapter
Battery Management
Each UPS power module
contains its own battery
charger with intelligent
charging electronics. These
can be adapted to the battery
in use and facilitate the use
of vendor independent
standard batteries.
A temperature compensated
charging curve ensures
an optimum charging
regime. Automatic testing
informs you of the charging
state of charge and when
charging will be complete.
Protect 3.M 2.0
Customer Benefits
Modular concept
»The UPS output can be easily
adapted to any required
performance parameters.
»Rapid expansion by insertion
of new modules at any time
and without additional costs.
»N+1 redundancy module
increases reliability
Low maintenance costs
»Module replacement in
case of failure within the
shortest possible time.
»For multiple UPS devices,
module exchange between
units is possible.
High efficiency
»Efficiency of 94 % at 35 % load
»Better efficiency means less
heat and thus lower running
costs for air conditioning
»Significant reduction
of CO
emissions
2
AEG Power Solutions
Approach your local AEG Power Solutions
representative for further support.
Contact details can be found on:
www.aegps.com
AEGPS - Protect 3.M 2.0 - EN - 01/2012 V1 - Due to our policy of continuous development, the data in this document is subject to change without notice.
AEG is a registered trademark used under licence from AB Electrolux.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.