A&D Weighing SJ-1000H, SJ-2000H, SJ-5000H, SJ-12KH Instruction Manual

SJ-1000H
SJ-2000H
SJ-5000H
SJ-12KH

WM+PD4001280A

SAFETY PRECAUTIONS

All safety messages are identified by the following, “WARNING” or
“CAUTION”, of ANSI Z535.4 (American National Standard Institute:

Product Safety Signs and Labels). The meanings are as follows:

WARNING

CAUTION

This manual is subject to change without notice at any time to improve the

product.

Product specifications are subject to change without any obligation on the

part of the manufacture.

When using the SJ-H, the following safety precautions should always be

followed.

WARNING Use only specified AC adapter for the scale. Other

CAUTION Avoid installing the scale in direct sunlight, which may cause

A potentially hazardous situation which, if not avoided,
could result in death or serious injury.
A potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.

adapter may cause damage (AC adapter is optional).
Internal service or adjustment to this product should be
performed by a qualified person.

discoloration or malfunctions.

Avoid over and/or shock load that could cause damage to the

scale.

Avoid using the weighing pan to move the scale, as that

could cause damage to the scale.

Do not mix the type of batteries. Replace all other batteries at

the same time.

If the scale is not to be used for a long period of time, remove

all batteries from the battery room to avoid leakage.

The scale is not watertight and avoid exposure to water .

1

PARTS DESCRIPTION

r

p

Weighing Platform

Spirit level

Display

Four leveling feet

ON/OFF key

Turns the scale power
on/off.

UNITS key

Changes weighing units,
(k)g, lb, oz or lb-oz.

RE-ZERO key

Sets display to zero or
subtracts weight of
container.

Battery cover

AC adapter jack

Battery indicator

Indicates battery remaining amount. It turns on

STABLE indicato

Indicates when the
reading is stable.

Polarity

about for 10 seconds when

owered on.

Weighing unit,
(k)g, lb or oz

(depends on model)

ZERO indicator

Indicates when the
scale is at zero point.

NET indicator

Indicates when NET weight is
displayed (Tare function is used).

`

Weighing unit,
lb-oz

(depends on model )

2