A&D Weighing GXA-10 Instruction Manual
8
8
GXA-10
Glass Breeze Break for Instruction Manual
Feature
The glass breeze break (GXA-10) can install on the all of the GX-A balances.
If the GXA-10 is used, it can protect the balance from the effects of a breeze and will provide more accurate
weighing results. An anti-static treatment has been applied to the breeze break components. Therefore, the
weighing error caused by static electricity can be reduced.
Installing the Glass Breeze Break
Step
1. Remove the weighing pan and pan support so that the balance
has not damage. Remove the AC adaptor, too. The explanation
uses the drawing of the GX-6002A.
Step
2. Remove the dust plate because the dust plate is not used, if the
following balances are used.
GX-2002A, GX-3002A, GX-4002A, GX-6002A, GX-10002A,
GX-6001A, GX-10001A,
GF-2002A, GF-3002A, GF-4002A, GF-6002A, GF-10002A,
GF-6001A, GF-10001A
Step
3. Pull both handles on the glass breeze break.
Place the glass breeze break on the balance.
Step
4. Confirm that both hooks of the handle are inserted under
the floor plate. Push in both handles. Install the weighing
pan and pan support on the balance.
Step
2. Remove the "dust plate".
Weighing pan
Pan support
Floor plate
The part of sectional view
Glass breeze break
GXA-10
Step
3.
Hook
Handle
Step
4.
Caution
Do not hold the breeze break when transporting
the balance. Hold the balance.
Remove the glass breeze break
in reverse procedures when you
clean around the weighing pan of
the balance.
Floor plate
Hook
Balance
Sectional view
Step
3.
Specifications
Handle
Step
4.
Mass 2.3 kg
Dimensions 259 W × 274 D × 268 H
259 274
26
Materials (Materials of the glass breeze break)
Glass parts
Resin parts Electro-conductive ABS, Polyacetal
Metal parts SUS, iron series
Tempered glass
( be treated an anti-static treatment inside single face )
259 35
332
Loading...