advidia A-45 Quick Setup Manual

www.Advidia.com

Quick Setup Guide

Advidia A-45 Bullet Camera

Table of Contents

A. Physical Camera Description ............................................................................................................ 3

B. Installation ......................................................................................................................................... 5

C. Search and Modify IP ....................................................................................................................... 8

D. Preview via Web Browser............................................................................................................... 11

Channel ParametersDisplaySetting ........................................................................................... 14

Channel ParametersVideo Settings ............................................................................................ 15

Channel ParametersMotion Detection Setting ........................................................................... 16

Channel ParametersText Overlay Setting .................................................................................. 16

Channel ParametersFront Para Config ...................................................................................... 17

Network ParametersNetwork Setting ........................................................................................ 17

Network ParametersNTP Setting ............................................................................................... 18

Network ParametersE-mail Setting ........................................................................................... 18

Alarm ParametersAlarm Input Setting ...................................................................................... 19

Alarm ParametersAlarm Output Setting .................................................................................... 19

Alarm Deployment Time ............................................................................................................... 19

User Management .......................................................................................................................... 20

Add User ............................................................................................................................................. 20

Modify User ........................................................................................................................................ 20

F. Adding Camera to Monitor Station ................................................................................................. 21

4/10/2012 Page 2

Advidia A-45 Bullet Camera

Serial NO.

Description

1

10M/100M self-adaptive Ethernet interface

2

Power supply

3

IN, G: Alarm input interface

1A, 1B: Alarm output interface

4

D+, D-: RS-485 interface

5

AUDIO IN, G: Audio input interface

AUDIO OUT, G: Audio output interface

A. Physical Camera Description

Note: There are two types of these cameras’ interface as shown in figure 1.1 and figure 1.2.

Please choose the right figure as your camera’s reference.

Figure 1.1

Figure 1.2

4/10/2012 Page 3

Advidia A-45 Bullet Camera

Figure 1.3

4/10/2012 Page 4

Advidia A-45 Bullet Camera

B. Installation

 Please check if all the items on the package list have been included with your camera.
 Read the following contents carefully before the installation.
 Make sure that all the related equipment is power-off during the installation.
 Check the power supply to prevent any damage caused by mismatching problems.
 Do not place the camera in extremely hot or damp environment. To avoid heat

accumulation, good ventilation is required for a proper operating environment.

 If the product does not operate properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the camera yourself. Users are
responsible for any problem caused by modification or repairing without authorization.

Bullet camera can be fixed in both wall and ceiling, customers can choose different ways to
install the camera according to their specific needs. The following section introduces the wall
mounting, and the ceiling mounting methods:

Step 1: Fix the camera wire hidden box to the wall.

Figure 2.1 Fix camera wire hidden box

If it is cement wall, you need to fix the expand bolt (note: the mounting hole of the expand bolt
should align with the wire hidden box) before fixing wire hidden box as shown in Figure 2.1. If
the wall surface is wooden, you can use the self-tapping screw to fix the wire hidden box
directly. Please note that the wall on which the camera is fixed should be able to bear at least
three times the weight of the bracket and the camera.

4/10/2012 Page 5

Advidia A-45 Bullet Camera

Step 2: Use screws to fix the mounting bracket with camera main body to wire hidden

box as shown in Figure 2.2.

Figure 2.2 Fix the camera

Step 3: Adjust the camera to the desired monitoring location and finally tighten the nuts

on bracket to fix the camera.

Step 4: Twist-off front cover from the camera, and then adjust the lens as shown in Figure 2.4
and Figure 2.5.

4/10/2012 Page 6

Figure 2.3 Adjust monitoring location

Advidia A-45 Bullet Camera

Figure 2.4

Figure 2.5 Adjust lens

Step 5: fix the lens and front cover as shown in Figure 2.6.

Figure 2.6

4/10/2012 Page 7

Advidia A-45 Bullet Camera

1. Install the SADP software, and then run the

“sadpdlg.exe”.

C. Search and Modify IP

SADP (Search Active Devices Protocol) software can automatically search the IP address of
network cameras in the same local area network (LAN) with connection diagram as following:

Figure 3.1

The operation of searching and modifying IP address is described as following:

Figure 3.2

4/10/2012 Page 8

Advidia A-45 Bullet Camera

2. Search IP address.

Figure 3.3

4/10/2012 Page 9

Advidia A-45 Bullet Camera

3. Modify IP address.

4/10/2012 Page 10

Advidia A-45 Bullet Camera

D. Preview via Web Browser

Note: The default IP of network cameras is ‘192.0.0.64’ with ‘admin’ as the

administrator, ‘12345’ as the password, and ‘8000’ as the default port.

For monitoring camera images, a computer running the Microsoft Windows Operating System
and Internet Explorer (Version 6.0 or later) are required. In this manual, we use Windows XP
and IE 6.0 for example.

Figure 4.1

1. Open the IE browser, set the security level to [Medium] in
[Tools/InternetOptions/Security/Custom Level…]

4/10/2012 Page 11

Advidia A-45 Bullet Camera

Figure 4.2

2. Input the IP address of the camera and press [Enter], and then click the dialog box that pops
up.

3. Click [Run] to install the ActiveX control.

4/10/2012 Page 12

Figure 4.3

Advidia A-45 Bullet Camera

Figure 4.4

4. Input “Username” (Default: admin), “Password” (Default: 12345) and “Port” (Default: 8000)
of the camera, then click [Login]

5. View the image

4/10/2012 Page 13

Figure 4.5

Advidia A-45 Bullet Camera

E. Web Interface Configuration

Channel ParametersDisplaySetting

According to different
requirements, enable the display
of Date&Time and Week by
clicking the checkbox.

Different date formats can be
selected.

There are two Time format: 24
hour and 12 hour.

The OSD Status can be set to
transparent & flickering,
transparent & un-flickering, nontransparent & flickering, or nontransparent & un-flickering.

4/10/2012 Page 14

Advidia A-45 Bullet Camera

Parameter

Description

Channel Name

Input the channel name for your need

Encode Parameters

Main stream or Sub stream optional

Stream Type

Video&Audio or Video optional

Resolution

Select the resolution for your need

Image Quality

Highest, Higher, Medium, Low, Lower or Lowest optional

Bitrate Type

Constant bitrate or Variable bitrate optional

Max. Bitrate

Select or customize a bitrate according to the resolution

Frame Rate

Select the frame rate for your need

Multicast Address

Set the multicast address, with the default multicast of

0.0.0.0

RTSP Port

Set the RTSP port, with the default RTSP port of 554

Channel ParametersVideo Settings

4/10/2012 Page 15

Advidia A-45 Bullet Camera

Video Encode Type

Select the video encode type for your need

Channel ParametersMotion
Detection Setting

Select the checkbox of Enable motion
detection to enable this function.

Zone Settings:Click Start draw
button to draw motion detection zone
by clicking and dragging the mouse
in the live video image.

User is allowed to draw multiple
motion detection zones in the same
picture. When all zones have been
set, click Stop draw to finish drawing.

Sensitivity:The sensitivity level can be set to 0, 1, 2, 3, 4 and 5. When it is set to 0, the sensitivity is
disabled.

Linkage:The Linkage method can be selected to either Email link, Trigger recording or Trigger alarm
output.

Click "Save" button to save the
modified parameters.

Channel ParametersText
Overlay Setting

Input the characters in the Text
Information box and define the OSD
location in the image by setting the
XPosition and YPosition, and then
select the checkbox of OSD Text.
After clicking Save to finish the
settings, the defined title will be
displayed on the image.

Note: The values of XPosition and

YPositon are relative to the upper left corner origin of the image.

4/10/2012 Page 16

Advidia A-45 Bullet Camera

Channel ParametersFront Para Config

In this page, user can adjust the
parameters like brightness, contrast,
saturation, sharpness, etc.

Shutter: User can set the shutter time
according to the different camera
models.

IrisMode:There are two modes:
IrisFirst and manual optional.

Power Mode:There are two modes:
50Hz and 60Hz optional.

Network ParametersNetwork Setting

Set the NIC Type, IP Address, Subnet
Mask, Gateway and DNS Server of the
network camera.

Click "Save" button to save the
modified parameters.

Note: Please reboot the network camera

to validate the modified parameters.

4/10/2012 Page 17

Advidia A-45 Bullet Camera

Network ParametersNTP Setting

Click the checkbox of Enable NTP
to enable this function. Input the
Server Address and Port of NTP.

If the public network is applied,
please input the NTP Server
Address with provision of time
sync service, e.g., 210.72.145.44.

In the private network is applied,
the NTP software can be used to
establish NTP server to achieve
time synchronization.

Click "Save" button to save the
modified parameters.

Note: Please reboot the network camera to validate the modified parameters.

Network ParametersE-mail Setting

Through E-mail settings, the alarm
message can be sent to the
designated E-mail address when
alarm event occurs.

Input the SMTP server, SMTP port,
user name, password, E-mail sender
and receiver.

Click "Save" button to save the
modified parameters.

Note: Please reboot the network

camera to validate the modified
parameters.

4/10/2012 Page 18

Advidia A-45 Bullet Camera

Alarm ParametersAlarm Input Setting

Set the type of Relay Status to NC or
NO.

Note: Please reboot the network

camera to validate the modified
parameters.

The Linkage can be selected to E-mail

link, Trigger alarm output or Trigger
recording.

Click "Save" button to save the
modified parameters.

Alarm ParametersAlarm Output Setting

The Output Delay refers to the length of
time that the relay remains in effect
after alarm occurs. The output delay
time can be set to 5sec, 10sec, 30sec,
1min, 2min, 5min, 10min or Manual
(manually disable).

Click "Save" button to save the
modified parameters.

Alarm Deployment Time

The Deployment time can be set to
several days a week or to all week,
with only four period configurable for
each day.

Note: The alarm deployment time

setting is valid only when the camera
has already been configured with the
motion detection, alarm input and
alarm output functions.

Click "Save" button to save the
modified parameters.

4/10/2012 Page 19

Advidia A-45 Bullet Camera

User Management

When the current login user is admin, it is allowed to create other users. Up to 15 users can be
created.

Add User

Click Add to enter the
settings interface as shown
here.

Input the user name,
password, IP address, MAC
address, and then select user
type. Finally, click OK to
finish the user addition.

Modify User

Click Modify to enter the
settings interface as shown
here.

It is allowed to modify the user
name, password, IP address,
MAC address, and then select
user type. Finally, click OK to
finish the user modification.

Note: Only the password of the user admin can be modified.

4/10/2012 Page 20

Advidia A-45 Bullet Camera

F. Adding Camera to Monitor Station

Using Auto discovery, enter the default credentials described above and click Start.

Using Manual add on, choose to add a camera and select the following from the dropdown:

4/10/2012 Page 21

Advidia A-45 Bullet Camera

4/10/2012 Page 22