Advent UBTSW1 User Manual

UBTSW1

Owner's Manual

Bluetooth Hands Free Vehicle Kit

IMPORTANTNOTE: The operation of the Bluetooth Hands Free Kit as described in this manual is

applicable to most phones. However, due to the configurationof some phones, some functions may not

apply. Pleasesee your installing dealer for more information.

1

Using Your Bluetooth Hands Free Kit

Powering On/Off

The bluetooth kit will automatically turnonwhenthe vehicle’s key is turned to the accessorypositionand will remain on
until the vehicle’s accessory poweris turned off. Afterturning on, the bluetooth kit willautomatically search for phonesthat
havebeen pairedwith it. Since it is possible to have multiple phones pairedto the systemthe orderof priority of
connecting willbe the latest phonepaired, the phone mostused withthesystem, the phone secondmostused phonewith
thesystem.Ifthebluetooth kit hasnotbeen paired to aphonepairingwill automatically activate.

Making a Call

When connected to thebluetoothkit you mayuse your phone as normal to dial numbers orsearch your contacts list
or by using Voice Dialing.

Voice Dialing

To activate voice dialing press theANSWER/END key on the bluetooth keypad, the system will prompt you fora
command. Clearly speak your command (example, “Call Shaun”). The system willthen confirm the command and in
this example will then call “Shaun”.

Ending a Call

To end a call press theANSWER/END key.

Answer a Call

When there is an incoming call the vehicle’s radio will be muted/turned off and the call will ring through the
vehicle’s speaker, to answer press theANSWER/END key.

Ignore an Incoming Call

To Ignore an incoming call press and hold theANSWER/END key for 2 to 5 seconds.

Redial the Last Number

To redial the last number press and hold the ANSWER/END key for 2 seconds.

Adjusting the Call Volume

While in a call, to adjust the volume up/down with the ANSWER/END key, pressing and holding the
ANSWER/END key will automatically raise or lower the volume. When the max volume is reached it is set up
to automatically lower the volume down to the min level. The system will beep 2 times when the min/max
volume levels are reached.

Transfer a Call

To transfer a call between bluetooth hands free or normal phone operation press and hold theANSWER/END keyon
the bluetooth keypad for 2 seconds.

Pairing

To activate phone pairing press and holdthe ANSWER/END key for 10 seconds, the system will beep 3 times.At
this time you will need to activate pairing on the phone, see your phones owners manual. The PIN code for pairing is
1234and will needtobe entered intoyour phoneat the time of pairing.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second, ‘press and hold’ refers to pressing for 2
seconds.

2

Using Your Bluetooth Hands Free Kit, continued

SETONNOTTUBDAPYEKNOITCNUF

NOyrosseccaelcihevnruT-pUtinUrewoP

lamronsaenohpesU-llaCAekaM

Answer Call ANSWER/END Press and release

esaelerdnasserPDNE/REWSNAllaCdnE

Voice Dialing ANSWER/END Press and release

Redial Last Number ANSWER/END Press and hold for 2 seconds

Transfer Call ANSWER/END Press and hold for 2 seconds

sdnoces5-2dlohdnasserPDNE/REWSNAllaCerongI

dlohdnasserPDNE/REWSNAemuloV

A/NDNE/REWSNAetuM

sdnoces01dlohdnasserPDNE/REWSNAgniriaP

Manual Search ANSWER/END Press and release

sdnoces51rofrehtegotsserPDNE/REWSNAteseR

Disconnect Bluetooth ANSWER/END Press and hold for 5 seconds

Quick Reference Guide - 1 Button Switch

Manual Search for Paired Phone

If your phone isnot connectedto or hasbeen disconnected by you from the bluetooth kit but haspreviously been
paired to the systemyou can activate themanual search which will locateyour phone and connect to it. To activate a
manual search presstheANSWER/END key.

Manual Temporary Disconnect

To temporarily disconnect the currently connected phone fromthe bluetooth kit pressand hold the ANSWER/
END key for 5 seconds,the system willbeep 2 times.

Reset / Clear All P aired Phones

To permanently removeall paired phones from the bluetooth kit press and hold theANSWER / ENDkey
for 15 seconds, the system will beep 4times.

Quick Reference

ANSWER/END KEY

3