
Safety Data Sheet
Page 1 of 5
Name of the product:
ReadRight Notebook ScreenKleen
Product Identification Number(s): RR1217
Recommended use:
Surface wipe
Use not recommended: Body wipe
12276 San Jose Blvd., Ste. 618 Fax number: 904-482-0099
Jacksonville, FL 32223 Emergency: 1-800-327-1237
CHEMTREC (Transportation): 1-800-424-9300
CPR STATEMENT: This product has been classified in accordance with the hazard criteria of the Canadian
Controlled Products Regulations (CPR) and the SDS contains all the information required by the CPR.
This SDS is designed for workplace employees, emergency personnel and for other conditions and situations
where there is a greater potential for large-scale or prolonged exposure, in accordance with requirements of the
U.S. Government's Occupational Safety and Health Administration (OSHA). It is not applicable for consumer use
of our products. For consumer use, all precautionary and first aid language is provided on the product label in
accordance with the applicable government regulation.
2. Hazard(s) identification
Flammable liquid, Target Organ Effect, Irritant
Other hazards which do not result in classification are: May form explosive peroxides.
Flammable liquids (Cat. 2)
Highly flammable liquid and vapor.
Causes mild skin irritation.
Causes serious eye irritation.
Specific target organ toxicity - single exposure (Cat. 3)
GHS Label elements, including precautionary statements
Highly flammable liquid and vapor.
Causes mild skin irritation.
Causes serious eye irritation.
May cause drowsiness or dizziness.
Precautionary statements:
P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Avoid breathing dust/ fume/ gas/ mist/ s/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.

Safety Data Sheet
Page 2 of 5
3. Composition / Information on ingredients
Chemical identity: 2-Propanol (solution) 65%
Isopropyl alcohol, Rubbing alcohol
Numbers of identity: CAS. 67-63-0 EINECS. 200-661-7
Chemical identity: Alkyl Dimethyl Benzyl Ammonium Chloride 0.21%
Numbers of identity: CAS 68391-01-5
Chemical identity: Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride 0.21%
Numbers of identity: CAS 68956-79-6
Chemical identity: Ammonium hydroxide 0.05%
Numbers of identity: CAS 7664-41-7 EINECS 215-697-6
Impurities: None of toxicological significance.
P304+313 +341 IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a
position comfortable for breathing. Consult a physician.
P302+352 IF ON SKIN: Wash with soap and water
IF ON SKIN: Wash with soap and water. Rinse until ammonia odor is gone.
P305+351+338 IF IN EYES: Rinse continuously with water for several minutes.
Remove contact lenses if present and easy to do; continue rinsing.
P301+330+331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
Most important symptoms and effects, both acute and delayed: Severe eye irritation. Skin irritation.
Suitable extinguishing equipment:
Water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Eliminate ignition source. Evacuate unnecessary personnel. Call appropriate fire fighting crew.
Special protective equipment for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Hazardous decomposition products formed under fire conditions. - Carbon oxides, ammonia
Use water spray to cool unopened containers.
6. Accidental release measures
Use personal protective equipment. Avoid breathing, mist or vapors. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Be aware of possible accumulating
vapors which could form explosive concentrations. Vapors can accumulate in low areas.
Environmental precautions:
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then absorb with industrial absorbent, or collect with an electrically protected
vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations.
Precautions for safe handling:
Avoid contact with skin and eyes. Avoid inhalation of vapors or mist.
Use explosion-proof equipment. Keep away from sources of ignition - No smoking.
Prevent the build up of electrostatic charge.
Conditions for safe storage:
Keep container tightly closed in a dry and well-ventilated place.
Containers which have been opened must be resealed and kept upright to prevent leakage.

Safety Data Sheet
Page 3 of 5
8. Exposure controls / personal protection
Information on the system design:
Product is intended for external use only. Stay up wind, out of any spray developed.
Exposure Limits: Reference 29CFR 1910.1000 Table Z-1
Component Name, CAS# OSHA PEL OSHA STEL
67-63-0 400 ppm 980 mg/m3 500 ppm 1,225 mg/m3
Ammonium hydroxide 7664-41-7 25 ppm 35 ppm as ammonia
Alkyl Dimethyl Benzyl Ammonium Chloride CAS 68391-01-5 NE NE
Alkyl Dimethyl Ethyl Benzyl Ammonium Chloride
8. Exposure controls / personal protection (continued)
Personal protective equipment
Respiratory protection: Where appropriate use a full-face supplied air respirator.
Hand protection: Rubber gloves.
Eye protection: Safety glasses with side-shields.
Skin and body protection: Chemical resistant apron or protective suit if splashing or repeated contact
with solution is likely; flame retardant and antistatic properties are recommended.
Wash hands and face before breaks and immediately after handling the product.
Handle in accordance with good industrial hygiene and safety practice.
9. Physical and chemical properties
Appearance: Clear, colorless liquid
Odor threshold: The highest known value is 22 ppm (Isopropyl alcohol)
Melting point:
no data available
Freezing Point: no data available
Initial boiling point: no data available
Flash point:
18 °C (65 °F) - closed cup
Evaporation rate:
no data available
Flammability (solid, gas): Not applicable
Explosion limits: Lower: 2% Upper: 12.7% (Isopropyl alcohol)
Vapor pressure: (highest partial vapor pressure) at 20°C: Not available
Vapor density:
Not available
Relative density (water=1.00): no data available
Auto-ignition temperature: Not available
Solubility: Totally soluble in water at 20°C Decomposition temperature: Not available
Partition coefficient: Log Kow = Not applicable to mixture.
Viscosity: Like water
10. Stability and reactivity
Chemical stability: No decomposition, if used according to specifications.
Possibility of hazardous reactions: May form explosive mixture with air.
Conditions to avoid: Heat, flames and sparks. Extremes of temperature and direct sunlight.
Materials to avoid: Aluminum, Acids, Oxidizing agents, Halogenated compounds, Acid anhydrides
Hazardous decomposition products: Carbon oxides, product vapors.

Safety Data Sheet
Page 4 of 5
11. Toxicological information
There is no data available for the product.
Routes of Entry: Absorbed through skin. Eye contact. Inhalation.
Oral Toxicity LD 50: 5143 mg/kg (Mouse) (Calculated value for 70% in water mixture)
18286 mg/kg (Rabbit) (Calculated value for 70% in water mixture)
Inhalation Toxicity, Vapor, LC50 No data.
Eye Irritation (Rabbit) No data.
Dermal Irritation (Rabbit) No data.
Chronic Effects on Humans:
No component listed by NTP, IARC, OSHA or ACGIH as a suspect or potential carcinogen.
California Prop. 65 chemicals: This product does not contain any chemicals known to State of
California to cause cancer, birth defects, or any other reproductive harm.
Contains material which may cause damage to the following organs: kidneys, liver, CNS,
Signs and Symptoms of Exposure: Central nervous system depression, prolonged or repeated exposure
can cause: nausea, dizziness, narcosis and drowsiness.
12. Ecological information
Ecotoxicity: Not available for the product.
BOD and COD: Not available.
Products of Biodegradation:
Hazardous short term degradation products are not likely.
Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.
Special Remarks on the Products of Biodegradation: Not available.
PBT and vPvB assessment: No data available.
Persistence and degradability: No data available.
Bioaccumulative potential: No data available.
Mobility in soil: No data available.
Other adverse effects: No data available.
13. Disposal considerations
Burn in a chemical incinerator equipped with an afterburner and scrubber.
Dispose in accordance with local, state and federal regulations.
14. Transport information
UN number: 3175 Class 4.1 Label: 4.1
Proper shipping name: Solids containing flammable liquid, n.o.s. (Isopropanol)
Reportable Quantity (RQ): Not applicable
Marine pollutant: No May also be shipped Consumer Commodity ORM-D
15. Regulatory information
OSHA Hazards: Hazard Communication Standard (29 CFR 1910.1200).
Flammable liquid, Target Organ Effect, Irritant
SARA 302 Components: None
SARA 313 Components: Isopropanol CAS 67-63-0, Ammonium hydroxide CAS 7664-41-7
All components are on TSCA, EINECS/ELINCS, AICS, and DSL.
Federal and State Regulations:
State Right to Know lists (RTK):
2-Propanol: FL, IL, MA, MN, NJ, PA, RI,
Ammonia, Water: Ma, PA, NJ
OSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
Flammable liquid, Target Organ Effect, Irritant
WHMIS (Canada): CLASS B-2: Flammable liquid with a flash point lower than 37.8°C (100°F). CLASS D-2B:
CLASS B-2: Flammable liquid with a flash point lower than 37.8°C (100°F). CLASS D-2B:
Material causing other toxic effects: None
California Prop. 65 Components: This product does not contain any chemicals known to State of California
to cause cancer, birth defects, or any other reproductive harm.

Safety Data Sheet
Page 5 of 5
SDS Preparation date: November 24, 2014.
Hazard Categories: Health Fire Pressure Reactivity Reference 49 CFR 171.8,
OSHA 29 CFR 1910.1200 and
Delayed Yes No XXX XXX SARA 302/311/312/313.
HMIS Hazard ratings: Health 2 Fire 3 Instability 0 Other B (Goggles, gloves)
Hazard Ratings: Least: 0 Slight: 1 Moderate: 2 High: 3 Extreme: 4
HMIS® is a registered trade and service mark of the NPCA.
Note: The information in this SDS was obtained from current reputable and competent sources.
However, the data is provided without warranty, expressed or implied, regarding its correctness or
accuracy. It is the user's responsibility to determine safe conditions for the use of this product and to
assume liability for loss, injury, damage or expense resulting from improper use of this product.
This MSDS is designed for workplace employees, emergency personnel and for other conditions and situations
where there is a greater potential for large-scale or prolonged exposure, in accordance with requirements of the
U.S. Government's Occupational Safety and Health Administration (OSHA).