Advantech UNO-1252G-Q0AE, UNO-1252GQ0A1501E-T, UNO-1252GQ0A1505E-T, UNO-1252GQ0A1502E-T, UNO-1252GQ0A1508E-T User Manual

User Manual

UNO-1252G

Intel® Quark™ Palm-Size Din­Rail Automation Computer with
2 x LAN, 2 x mPCIe, 2 x COM,
8 x DI/O, 2 x USB, 1 x microSD,
1 x SIM

UNO-1252G User Manual ii

限用物質含有情況標示聲明書

設備名稱：

Equipment name

電腦

型號 （型式）：

Type designation (Type)

UNO-1252G 系列

( 系列型號參見說明書 )

單元 Unit

限用物質及其化學符號

Restricted substances and its chemical symbols

鉛 Lead

(Pb)

汞

Mercury
(Hg)

鎘

Cadmium
(Cd)

六價鉻

Hexavalent
chromium

(Cr

+6

)

多溴聯苯

Polybrominated
biphenyls
(PBB)

多溴二苯醚

Polybrominated
diphenyl ethers
(PBDE)

電路板 － ○ ○ ○ ○ ○
機殼

( 外殼、支
架…等)

○○ ○ ○ ○ ○

其它固定
組件
(螺絲)

－○ ○ ○ ○ ○

配件
(線材)

○○ ○ ○ ○ ○

記憶卡 ○ ○ － ○ ○ ○
備考 1.“ 超出 0.1 wt %” 及 “ 超出 0.01 wt %” 係指限用物質之百分比含量超出百分比含

量基準值。

Note 1. “Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content
of the restricted substance exceeds the reference percentage value of presence condition.

備考 2.“ ○ ” 係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2. “○”indicates that the percentage content of the restricted substance does not exceed
the percentage of reference value of presence.

備考 3.“ － ” 係指該項限用物質為排除項目。

Note 3. The “-” indicates that the restricted substance corresponds to the exemption.

iii UNO-1252G User Manual

Copyright

The documentation and the software included with this product are copyrighted 2017
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How­ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe­ments of the rights of third parties, which may result from its use.

Acknowledgements

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor­poration.

Intel®, Core™, Atom™ and Quark™ are the trademarks of Intel Corporation
Yocto Project™ is a registered trademark of The Linux Foundation.
All other product names or trademarks are properties of their respective owners.

Support

For more information on this and other Advantech products, please visit our websites
at: http://www.advantech.com

For technical support and service, please visit our support website at:
http://support.advantech.com/

Part No. 2003W25202 Edition 3
Printed in Taiwan March 2017

UNO-1252G User Manual iv

This manual applies to the below model which is abbreviated as UNO-1252G series
products in this article.

*Model number: UNO-1252G
*Part number:

v UNO-1252G User Manual

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur­chase.

This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec­tive, it will be repaired or replaced at no charge during the warranty period. For out­of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return
more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
kind of cable is available from Advantech. Please contact your local supplier for
ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera­tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.

UNO-1252G User Manual vi

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the
following information ready before you call:

– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,

etc.)

– A complete description of the problem
– The exact wording of any error messages

Safety Precaution - Static Electricity

Follow these simple precautions to protect yourself from harm and the products from
damage.

 To avoid electrical shock, always disconnect the power from your PC chassis

before you work on it. Don't touch any components on the CPU card or other
cards while the PC is on.

 Disconnect power before making any configuration changes. The sudden rush

of power as you connect a jumper or install a card may damage sensitive elec­tronic components.

vii UNO-1252G User Manual

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

– The power cord or plug is damaged.
– Liquid has penetrated into the equipment.
– The equipment has been exposed to moisture.
– The equipment does not work well, or you cannot get it to work according to

the user's manual.

– The equipment has been dropped and damaged.
– The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F) for UNO-1252G.THIS COULD DAMAGE THE EQUIPMENT. THE
EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY

REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

17. ATTENTION: Danger d'explosion si la batterie est mal REMPLACE. REM-

PLACER UNIQUEMENT PAR LE MEME TYPE OU EQUIVALENT RECOM­MANDÉ PAR LE FABRICANT, jeter les piles usagées SELON LES
INSTRUCTIONS DU FABRICANT.

18. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

警告使用者：這是甲類資訊產品，在居住的環境中使用時， 可能會造成射頻干擾，在
這種情況下，使用者會被要求採取某些適當對策。

UNO-1252G User Manual viii

安全指示

1. 請仔細閱讀此安全操作說明。

2. 請妥善保存此用戶手冊供日後參考。

3. 用濕抹布清洗設備前，請從插座拔下電源線。請不要使用液體或去汙噴霧劑清洗

設備。

4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。

5. 請不要在潮濕環境中使用設備。

6. 請在安裝前確保設備放置在可靠的平面上，意外跌落可能會導致設備損壞。

7. 設備外殼的開口是用於空氣對流，從而防止設備過熱。請勿覆蓋開孔。

8. 當您連接設備到電源插座上前，請確認電源插座的電壓是否符合要求。

9. 請將電源線佈置在人們不易絆到的位置，並不要在電源線上覆蓋任何雜物。

10. 請注意設備上的所有警告和注意標語。

11. 如果長時間不使用設備，請將其同電源插座斷開，避免設備被超標的電壓波動損

壞。

12. 請不要讓任何液體流入通風口，以免引起火災或者短路。

13. 請不要自行打開設備。為了確保您的安全，請由經過認證的工程師來打開設備。

14. 如遇下列情況，請由專業人員來維修：

 電源線或者插頭損壞；
 設備內部有液體流入；
 設備曾暴露在過於潮濕的環境中使用；
 設備無法正常工作，或您無法通過用戶手冊來使其正常工作；
 設備跌落或者損壞；
 設備有明顯的外觀破損。

15. 請不要把設備放置在超出我們建議的溫度範圍的環境，即不要低於 0°C

（32°F）或高於 40°C （104°F），否則可能會損壞設備。

16. 注意：若電池放置不正確，將有爆炸的危險。因此，只可以使用製造商推薦的同

一種或者同等型號的電池進行替換。請按照製造商的指示處理舊電池。

17. 根據 IEC 704-1:1982 的規定，操作員所在位置的聲壓級不可高於 70dB(A)。

18. 限制區域：請勿將設備安裝於限制區域使用。

19. 免責聲明：該安全指示符合 IEC 704-1 的要求。研華公司對其內容的準確性不承

擔任何法律責任。

ix UNO-1252G User Manual

Contents

Chapter 1 Overview...............................................1

1.1 Introduction ............................................................................................... 2

1.2 Safety Precautions .................................................................................... 2

1.3 Accessories............................................................................................... 3

Chapter 2 Hardware Functionality.......................5

2.1 Introduction ............................................................................................... 6

Figure 2.1 Front Panel of UNO-1252G ........................................ 6

Figure 2.2 Top Panel of UNO-1252G .......................................... 6

Figure 2.3 Bottom Panel of UNO-1252G ..................................... 6

2.2 Isolated Serial Interface (COM1~COM2) .................................................. 7

2.2.1 Isolated RS-232/485 Interface (COM1) ........................................ 7

2.2.2 Isolated RS-232 Interface (COM2) .............................................. 7

2.3 Ethernet LAN Connector........................................................................... 7

2.4 Power Connector ...................................................................................... 7

2.5 USB Connector ......................................................................................... 7

2.6 Digital Input/Output Interface .................................................................... 8

Figure 2.4 Wet Contact Connection............................................. 8

Figure 2.5 Wet Contact Connection............................................. 8

2.7 LED Indicators........................................................................................... 9

2.8 microSD card Slot ..................................................................................... 9

2.9 SIM card Slot............................................................................................. 9

2.10 PCI Express Mini Card Socket................................................................. 9

Figure 2.6 PCI Express Mini Card Socket on board .................... 9

2.11 iDoor Expansion I/O................................................................................ 10

2.12 Antenna Mounting................................................................................... 10

2.13 RTC Battery Specification...................................................................... 10

2.14 Power Management................................................................................ 10

2.15 Reset Button ........................................................................................... 10

Chapter 3 Initial Setup ........................................11

3.1 Chassis Grounding.................................................................................. 12

Figure 3.1 Chassis Grounding Connection................................ 12

3.2 Inserting a SD card/SIM card.................................................................. 12

3.3 Installing a Wireless module Card and Antenna (Optional) .................... 13

3.4 3.4 Installing iDoor expansion I/O ........................................................... 14

3.5 Din-rail Kit Assembly ............................................................................... 14

Figure 3.2 UNO-1252G with Din-rail mounting .......................... 14

3.6 Connecting Power................................................................................... 15

Chapter 4 Software Functionality......................17

4.1 Console Port Setting ............................................................................... 18

Figure 4.1 PuTTY Configuration ................................................ 18

Figure 4.2 Log in to UNO-1252G............................................... 18

4.2 LAN A Connection................................................................................... 19

Figure 4.3 Enable LAN A functionality ....................................... 19

Figure 4.4 LAN A connection status .......................................... 19

Figure 4.5 LAN A IP Address..................................................... 20

4.3 LAN B Connection................................................................................... 20

Figure 4.6 Enable LAN B functionality ....................................... 20

Figure 4.7 LAN B connection status .......................................... 21

UNO-1252G User Manual x

Figure 4.8 LAN B IP Address .................................................... 21

4.4 Assign IP Address for LAN Port.............................................................. 22

Figure 4.9 Assigning an IP Address example........................... 22

4.5 Digital Input & Output.............................................................................. 22

4.5.1 Setting of Digital Output.............................................................. 22

4.5.2 Checking of Digital Input............................................................. 23

Appendix A System Settings and Pin Assignments

25

A.1 Board Connectors and Switches............................................................. 26

Figure A.1 Connector & Switch Locations (front))...................... 26

Table A.1: Connectors and Jumpers ......................................... 26

A.2 Isolated RS-232/485 Serial Port (COM1)................................................ 26

Table A.2: RS-232/485 Serial Port Pin Assignments................. 26

Table A.3: Jumper for COM1 RS-232/485 switch...................... 27

A.3 Isolated RS-232 Standard Serial Port (COM2)....................................... 27

Table A.4: RS-232 Serial Port PIN Assignment......................... 27

A.4 USB Connector....................................................................................... 28

Table A.5: USB 2.0 Connector Pin Assignments....................... 28

A.5 LAN Connector ....................................................................................... 28

Table A.6: LAN Connector Pin Assignments ............................. 28

A.6 Isolated Digital I/O Connector ................................................................. 29

Table A.7: Isolated Digital I/O Connector .................................. 29

A.7 Power Connector (PWR) ........................................................................ 29

Table A.8: Power connector pin assignments ........................... 29

Chapter 1

1 Overview

This chapter provides an overview
of UNO-1252G specifications.
Sections include:

 Introduction
 Hardware specification
 Safety precautions

UNO-1252G User Manual 2

1.1 Introduction

The UNO-1252G is an embedded Application Ready Platform (ARP) that can
shorten your development time and offers a wide array of networking interfaces to
fulfill the extensive needs in different projects. UNO-1252G employs Intel’s latest
Quark technology and provides rich interfaces including up to 2 x isolated serial port,
2 x LAN, 2 x USB ports, 8 x isolated DI/O and 1 x iDoor I/O expansion. UNO-1252G
supports wireless PCI Express Mini Card (mPCIe card) and Advantech latest iDoor
technology for various Internet of Things (IoT) applications.

The UNO-1252G can operate in wide temperatures (from -20 to 60°C). The UNO­1252G also adopts Intel Quark CPUs with great power efficiency for gateway plat-

forms.
The UNO-1252G provides multiple expansion including two mPCIe cards, one

microSD and SIM card support. With these expansions the UNO-1252G has great
expandability from Wi-Fi, 3G, I/O expansion and industrial fieldbus protocols by iDoor
technology.

The UNO-1252G with Intel Quark CPUs supports Yocto Linux which is an open
embedded OS system allowing users to integrate applications easily by taking the
form of Board Support Package (BSP) layers for which a standard format has been
developed. That can provide versatile functions to fulfill diverse requirements.

1.2 Safety Precautions

The following sections tell how to make each connection. In most cases, you will sim­ply need to connect a standard cable.

Warning! Always disconnect the power cord from your chassis whenever you are

working on it. Do not connect while the power is on. A sudden rush of
power can damage sensitive electronic components. Only experienced
electronics personnel should open the chassis.

Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant

toucher UNO-1252G. Appareils électroniques modernes sont très sensi­bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.

Caution! Always ground yourself to remove any static electric charge before

touching the product. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in an anti-static
bag.

Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque

vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro­niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.