Advantage S-250 Owners manual

ADVANTAGE

ADVANTAGE

STANDBY

POWER-AMPLIFIER S-250

Table of contents

Introduction 2

“Burn-In” 2

Design 2
Balanced signal transmission 2
Unpacking 3
Placement 3
Cleaning 3

Rear panel 4

Balanced Inputs 4
Unbalanced Inputs 4
Output Connectors 4
Balanced / Unbalanced switch 4
Data Com 4
AC Line Cord Recepatcle 4

Front panel 5

Standby 5
LED / Indicator 5

Trouble Shooting 6

Warranty 7

Obtaining Service 7

ADVANTAGE

This symbol is intended to alert you to the presence of
unisulated, dangerous voltage within the unit’s case that may
be sufficient magnitude to constitute a risk of electric shock.

This symbol is intended to alert you to the presence of
important operating and maintenance instructions in the
litterature accompanying this unit.

To prevent fire or shock hazard, do not expose this unit to rain
or moisture.

To avoid electrical shock, do not open the unit’s case, there are
no serviceable parts inside.

Refer all servicing to qualified personell only.

Marking by the “CE ” symbol (shown left)indicates compliance
of this device with the EMC (Electromagnetic Compatibility)and
LVD (Low Voltage Directive)standards of the European
Community.

The information contained in the manual is subject to change
without notice.The most current version of this manual will be
posted on our web site at http://www.bladelius.com.

1

ADVANTAGE