Advance Tabco WS1272CMX Installation Manual

INSTALLATION INSTRUCTIONS

Step 5:

Position Wall Shelf directly above (2”) Wall Brackets, in line with
marking on wall (
against the wall, SLOWLY lower Shelf down onto Wall Brackets. Press
down firmly to secure Shelf to Brackets.

Photo 5). While keeping rear flange of Wall Shelf tight

(Continued)

Installation Instructions for

Wall Mounted Shelf

Photo 5

Edgewood, New York 11717-8380

DECEMBER 2006

CHECK FOR CONCEALED DAMAGE

FILE CL

Wall Mounted Shelves manufactured by ADVANCE TABCO®are designed and constructed for food service
applications. ADVANCE TABCO®does not recommend product use for activities employing harsh and active
chemicals. Please consult factory regarding unusual applications.

AIM WITH DELIVERING FREIGHT CARRIER

CONTENTS INCLUDE:

INSTALLATION INSTRUCTIONS

(Continued)

• (1) Wall Shelf with required Brackets

NOTE: Mounting hardware not included

TOOLS REQUIRED:

• Drill Motor and Assorted Bits

• Tools as per selected mounting hardware

• Level

INSTALLATION INSTRUCTIONS

Step 1:

Identify desired shelf
height and mark level line
onto wall (Photo 1).

Step 2:

Position Wall Brackets at
desired location (Ideally
on wall stud). Align top
(Horizontal) Flange of
Bracket with level line and
secure Brackets to wall
(Photo 2).

Photo 1

Step 3:

Locate Shelf onto Brackets and mark end of Wall Shelf at desired location

Photo 3). Remove Wall Shelf from Brackets.

(

Photo 3

Step 4:

Peel off Protective Film Strip from top of Brackets (Photo 4).

CAUTION!

NOT REMOVE

DO
PROTECTIVE FILM AT
THIS TIME FROM TAPE
ON BRACKETS!

Removing protective film
at this time may result in
improper positioning of shelf.
Once film is removed and
shelf is set onto Bracket, shelf
CANNOT be repositioned

(Photo 2a).

Photo 2

DO NOT

REMOVE PROTECTIVE

FILM AT THIS TIME!

Photo 4

Continued >>