Advance Tabco TTS308X, TTS248X, TTF308X, TTF247X, TT307X Installation Manual
...
Installation Instructions for
TT Series Tables
Edgewood, New York 11717-8380
9/2012
CHECK FOR CONCEALED DAMAGE
FILE CLAIM WITH DELIVERING FREIGHT CARRIER
Tables manufactured by
applications including Food Preparation, Cooking, Manufacturing, Material
Handling, Laboratory Service and the like.
recommend product use for activities employing harsh and active chemicals.
Consult factory regarding unusual applications.
ADV ANC E TA BCO
are designed and constructed for
AD V ANC E TAB C O
does not
TABLES with Undershelf
Set Screw
Adjustable Bullet Feet
This package contains Table Top, Undershelf, Legs & Set Screws
Step 1:
Lay the table top flat on
the box to protect the
finish during assembly.
(Figure 1)
Figure 1
NSF Installations require all set screws filled
with an approved silicone sealer.
Step 2:
Insert set screws into undershelf leg collar. Position leg into leg collar to desired height and tighten set screw to secure legs
Figure 2
FINAL STEP
Turn table upright and level by adjusting bullet feet.
Leg Collar
Leg Collar
Step 3:
Insert legs and undershelf
assembly into gussets of
the table top as indicated in
Figure 3. Tighten set screws.
Figure 3
NSF Installations require all set screws filled
with an approved silicone sealer.
INSTALLATION OF ADVANCE TABCO DRAWERS:
if you are installing Advance Tabco Drawers, you will need to order
a TA-90 Drawer Adapter. This will allow the drawers to attach to a
TT Series Table.
Please see the Drawer Instruction Guide for
Installation on the Advance Tabco
website: http://www.advancetabco.com.
Loading...