Advance Tabco TFMS-122 User Manual
EQUIPMENT FILLER TABLE
EATURES:
F
TOP is furnished with 1 5/8” sanitary rolled rim edge in front.
Square edges on sides and 1/1/2” splash of single metal
thickness on rear.
Hat channels stud welded to top which reinforces and
maintains a level working surface.
Welded Front to Back Leg Assembly.
Rear (Left to Right) Stretcher bolts to side leg assemblies.
CONSTRUCTION:
All TIG welded. Exposed weld areas polished to match
adjacent surfaces.
Entire top mechanically polished to a satin finish.
Top is sound deadened.
Roll formed embossed galvanized hat channels are secured to
top by means of structural adhesive and weld studs.
Gussets welded to support hat sections.
MATERIAL:
TOP: 16 gauge stainless steel type “304” series.
STRETCHERS: 1 5/8” diameter tubular stainless steel.
LEGS: 1 5/8” diameter tubular stainless steel.
Stainless steel gussets.
1” stainless steel bullet feet.
STAINLESS STEEL
Item #: Qty #:
Model #:
Project #:
Model # Width Length Wt.
TFMS-182
TFMS-180
TFMS-183
TFMS-152
TFMS-150
TFMS-153
TFMS-122
TFMS-120
TFMS-123
18”
18”
18”
15"
15"
15"
12"
12"
12"
24”
30”
36"
24"
30"
36"
24"
30"
36"
27 lbs.
35 lbs.
43 lbs.
25 lbs.
33 lbs.
41 lbs.
22 lbs.
31 lbs.
39 lbs.
DETAILS and SPECIFICATIONS
TOL ± .500” ALL DIMENSIONS ARE TYPICAL
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
www.advancetabco.com
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, SEPT. 2005
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
O-15
Loading...