MULTIPLE SINK SIZES & Accessories
(welded into Table Top)
Item #: Qty #:
Model #:
Project #:
COUNTERTOP TABLES with
* TA-11C
* TA-11D
* TA-11E
†
* TA-11G
VKS Series
Splash are furnished
with K-1 Splash Mounted
Faucet with 12” Spout
as standard
Single sink bowl come with K-50 Swing Spout
Faucet & K-6 Basket Drain unless noted.
Double sink bowls come with K-53 Swing Spout
Faucet & K-6 Basket Drain unless noted.
ingle Bowl Double Bowl
S
TA-11A
TA-11B
TA-11A-2
TA-11B-2
* TA-11C-2
* TA-11D-2
* TA-11E-2
††
TA-11F
TA-11F-2
* TA-11G-2
TA-11J
TA-11L
TA-11N
* Only installed in tables 30” (762mm) or wider
†
K-52 Faucet Standard (Single Bowl)
††
K-53 Faucet Standard (Double Bowl)
TA-11J-2
TA-11L-2
TA-11N-2
K-50 Deck Mounted Faucet
is Standard on tables with
1 1/2”, 5” or no rear splash
TA-56 - 5” NSF Partition
A B
16” x 20” x 8”
16” x 20” x 12”
20” x 20” x 8”
20” x 20” x 12”
24” x 24” x 12”
10” x 14” x 10”
28” x 20” x 12”
14” x 16” x 12”
18” x 24” x 12”
18” x 18” x 14”
TA-11K
DROP-IN
FILLER STATION
(Factory Install Only)
(Not shown)
(406mm x 508mm x 203mm)
406mm x 508mm x 305mm)
(
(508mm x 508mm x 203mm)
(508mm x 508mm x 305mm)
(610mm x 610mm x 305mm)
(254mm x 356mm x 254mm)
(508mm x 711mm x 305mm)
(356mm x 406mm x 305mm)
(457mm x 610mm x 305mm)
(457mm x 457mm x 355mm)
FAUCETS & ACCESSORIES
K-2A Poly-Vance Sink Cover 10"x14"
K-2B Poly-Vance Sink Cover 14"x16"
K-2C Poly-Vance Sink Cover 16"x20"
K-2D Poly-Vance Sink Cover 18"x24"
K-2E Poly-Vance Sink Cover 20"x20"
K-2F Poly-Vance Sink Cover 24"x24"
K-2G Poly-Vance Sink Cover 20"x28"
K-4 Lever Drain Bracket
K-5 Lever Drain
K-12 Poly Sink Cover
K-15 Lever Drain with Overflow
K-50 Deck Mounted 4" O.C. 8” Swing Spout Faucet
K-50OMIT Omit Swing Spout Faucet
K-52 Deck Mounted 4" O.C. 3-1/2" Gooseneck Faucet
K-53 Deck Mounted 4" O.C. 12" Gooseneck Faucet
K-52OMIT Omit Swing Spout Faucet
K-55 8 1/2" Spout 4" O.C. Deck Mounted Gooseneck Faucet
K-60 4" O.C. Splash Mounted Gooseneck Faucet
K-62 X.H.D. 4" O.C. Deck Mounted Gooseneck Faucet
K-105 14" Splash Mounted 8" O.C. Faucet
K-112 Extra Heavy Duty 12” Splash Mounted Faucet
K-320-LU Wrist Handles for Splash Mounted Faucets
K-452 6"x9" Control Bracket
K-453 14"x16" Control Bracket
K-455A Stainless Steel Sink Cover 10"x14"
K-455B Stainless Steel Sink Cover 14"x16"
K-455C Stainless Steel Sink Cover 16"x20"
K-455D Stainless Steel Sink Cover 18"x24"
K-455E Stainless Steel Sink Cover 20"x20"
K-455F Stainless Steel Sink Cover 24"x24"
K-455G Stainless Steel Sink Cover 20"x28"
K-460 Installation of Disposal Cone with 6"x9" Control Bracket
K-461 Installation of Collar with 6"x9" Control Bracket
K-470 14" deep Bowls
TA-11Z (return only)
Optional: 5” Splash Tables require a 2
return for splash mounted faucet
"
TA-11KM
ICE & FILLER STATION
(Factory Install Only)
www.advancetabco.com
Includes Cover
For More Faucet Options & Faucet Specs,
See Faucet Specifications in Section G
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
K-2
TOL ± .500” ALL DIMENSIONS ARE TYPICAL
21"
13"
11"
5"
6"
9"
9"
3"
8"
15"
DETAILS and SPECIFICATIONS
MULTIPLE SINK SIZES
(WELDED INTO TABLE TOP)
FLAT TOP
24” Wide or Smaller
*For 24” Enclosed Base Tables with
Sliding Doors. Faucet on Side.
FLAT TOP or 1-1/2” REAR SPLASH
30” or Wider
A-11K - DROP-IN FILLER STATION
T
(FACTORY INSTALL ONLY)
TA-11KM - DROP-IN WATER/ICE STATION
(FACTORY INSTALL ONLY)
K-2a
5” REAR SPLASH with 1” RETURN
TA-11Z: Optional: 5” Splash Tables require a
2” return for splash mounted faucet
10” REAR SPLASH with 2” RETURN
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, SEPTEMBER 2010