Advance Tabco T912418RX, T947218RLX, T935418RLX, T9836018RLX, T923618RLX Specifications
STAINLESS STEEL
REGALINE SINKS
T9 SERIES
Item #: Qty #:
Model #:
Project #:
Recessed Bowl Surface
Accommodates
Poly-Vance Cutting Boards
& Sink Covers
FEATURES:
Tile edge for ease of installation.
One piece Deep Drawn sink bowls with integral
drainboards with splash.
Featuring the single bowl unit design.
All sink bowls have a large liberal 3” radius.
Placement of the welded leg assembly ensures stability and
furnishes direct support of the column load requirement for
the entire sink unit.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a
satin finish.
Gussets welded to a die-embossed reinforcing channel.
YES! It's SeaM ess!
Deep Drawn Bowls Are Seamless
And Drawn Out Of A Single Sheet Of
Steel
MECHANICAL:
Supply is 1/2” IPS hot & cold.
Faucet holes on 8” centers.
Faucets are not included
(see accessories).
Waste drains are 1 1/2” IPS S/S basket type, located in
center of sink bowl, and are included.
MATERIAL:
1 5/8” diameter galvanized legs and gussets.
1” adjustable plastic bullet feet.
Bowls are heavy gauge stainless steel type 304 series.
Drainboards, splash and rolled rims are fabricated using heavy
gauge stainless steel type 304 series.
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: customer@advancetabco.com or Fax: 631-242-6900
Email: smartfab@advancetabco.com or Fax: 631-586-2933
For Smart Fabrication™ Quotes:
C-11
DIMENSIONS and SPECIFICATIONS
O
l
h
d
Size
O
l
h
Drainboard
Size
Overall
L
h
board
Size
O
l
h
12” Water Level Accommodates Pot & Dish Applications
TOL Overall: ± .500” ALL DIMENSIONS ARE TYPICAL
Interior: ± .250”
veral
Lengt
engt
Drain
Lengt
veral
Overall
Length
B
A
Drainboard
Size
BOWL Overall # of # of Drbd. Wt. Recommended
(SIZE) Length Comp. Drbds Size (lbs.) Use MODEL # A B C D V W X Y Z
D
Drainboar
veral
Lengt
16”x20” 25” One None - 49 DISH SINKS T9-1-24 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 43” One One 18” 65 DISH SINKS T9-1-24-18RorL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 54” One Two 18” 82 DISH SINKS T9-1-24-18RL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 44” Two None - 66 DISH SINKS T9-2-36 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 58” Two One 18” 72 DISH SINKS T9-2-36-18RorL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 72” Two Two 18” 120 DISH SINKS T9-2-36-18RL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 62” Three None - 89 DISH SINKS T9-3-54 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” **77” Three One 18” 134 DISH SINKS T9-3-54-18RorL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 91” Three Two 18” 168 DISH SINKS T9-3-54-18RL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” 103” Three Two 190 DISH SINKS T9-3-54-24RL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
16”x20” *110” Four Two 18” 195 DISH SINKS T9-4-72-18RL 20” 16” 13-5/8” 27” 38” 8” 12” 22” 42”
20”x20” 29” One None - 61 DISH SINKS T9-21-20 20” 20” 13-5/8” 27” 38” 8” 12” 22” 42”
20”x20” 44” One One 18” 71 DISH SINKS T9-21-20-18RorL 20” 20” 13-5/8” 27” 38” 8” 12” 22” 42”
20”x20” 81” Two Two 18” 132
20”X20” 89” Three One 18” 150
20”x20” 103” Three Two 18” 175
20”x20” †115” Three Two 24” 232
DISH & POT SINKS
DISH & POT SINKS
DISH & POT SINKS
DISH & POT SINKS
T9-22-40-18RL 20” 20” 13-5/8” 27” 38” 8” 12” 22” 42”
T9-23-60-18RorL 20” 20” 15-5/8” 27” 38” 8” 12” 22” 42”
T9-23-60-18RL 20” 20” 13-5/8” 27” 38” 8” 12” 22” 42”
T9-23-60-24RLH 20” 20” 13-5/8” 27” 38” 8” 12” 22” 42”
18”x24” 109” Three Two 24” 262 POT SINK T9-63-54-24RL 24” 18” 15-5/8” 31” 38” 8” 12” 22” 42”
20”x28” 103” Three Two 18” 270 PAN SINK T9-83-60-18RL 28” 20” 17-5/8” 35” 38” 8” 12” 22” 42”
* Requires 2 Faucets
PLUMBING ROUGH-IN
** Specify Drainboard Location
† 14” Deep Bowls
SECTION
C-11a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, SEPTEMBER 2014
Loading...