Advance Tabco RA-14 Installation Manual

Installation Instructions for

GLASS RACK DOLLY HANDLES

(RA-14)

Edgewood, New York 11717-8380

3/09

CHECK FOR CONCEALED DAMAGE

FILE CLAIM WITH DELIVERING FREIGHT CARRIER

Pan Rack Dollies manufactured by ADVANCE TABCO®are designed and constructed for the use of
product storage and transport. ADVANCE TABCO®does not recommend product use for activities
employing harsh and active chemicals. Please consult factory regarding unusual applications.

CONTENTS INCLUDE:

Quantity Parts Description

(1) Handle
(2) Side Support Straps
(4) 1/4” - 20 x 1-1/2” Bolt
(2) 1/4” - 20 x 1/2” Bolt

(6) 1/4” - 20 Washer Nuts

TOOLS REQUIRED: 7/16” Open end Wrench

STEP 1:

Install Handle to GRD-1 Rack Dolly. Align hole at bottom of handle with hole
in GRD-1 Dolly. Use 1/4”-20 x 1-1/2” Bolt & Washer Nut to secure. (Figure 1).

Figure 1

STEP 2:

Install Side Support Straps by aligning edge of strap with edge of handle and
bottom edge of GRD-1 (Figure 2). Use 1/4”-20 x 1-1/2” Bolt to secure Support
Strap to Handle and 1/4”-20 x 1/2” Bolt to secure Support Strap to side of
GRD-1 (Figure 3 & 4). Tighten all mounting hardware.

Figure 2

Figure 3

Figure 4