Advance Tabco K-447, FC-CB-1 User Manual

F-1

K-72

K-491

K-447

K-448

K-490

K-510

Includes Bracket.

Item #:

Project #:

K-498

K-440

Dishwasher By Others

K-475

K-499

K-480

K-500

SMART SINK MODIFICATIONS

NEW YORK GEORGIA TEXAS NEVADA

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]

Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933

K-460

K-494

K-456

K-37

K-452

K-520

www.advancetabco.com

SMART SINK MODIFICATIONS & ACCESSORIES

SMART MODIFICATIONS

QTY.

____ K-23 Welded Set-Up/Crated
____ K-24 Shell Crating
____ K-37 Anti-Siphon Vacuum Breaker Holes
____ K-57 Welded field Joint (Welded in field by others)
____ K-77 Splash Cutout (
____ K-106 Mirror Highlite Edge for Sink
____ K-440 Waste Trough furnished with a 2” deep removable basket
____ K-447 High Backsplash up to 18”
____ K-448 High Backsplash up to 13”
____ K-450 Extra Drainboard
____ K-451 Drainboard Corner Turn
____ K-452 Control Bracket 8 x 12
____ K-453 Control Bracket 14 x 16
____ K-454 Drainboard or Sink Sidesplash
____ K-456 Scrap Block Installed
____ K-460 Installation of Disposal Cone with 6” x 9” Control Bracket,

Faucet Holes (

____ K-460A Installation of Disposal Cone with 14” x 16” Control Bracket,

Faucet Holes (Cone supplied by others)

____ K-461 Install Collar with 6” x 9” control bracket (Collar supplied by others)

Pipe Chase)

Cone supplied by others)

QTY.

____ K-461A Install Collar with 14” x 16” control bracket (

Collar supplied by others)

____ K-470 Modify Bowl Depth
____ K-472 Faucet Hole Revision
____ K-473 Working Height Revision
____ K-476 Punch for Over Flow Holes (

Only)

____ K-479 Undershelf Under Drainboard
____ K-480 Stainless Steel 12” Wide Shelf (min. of 3 ft.)
____ K-489 Provision for Pot Washer (for a “Kewanee” only)
____ K-490 Provision for Pot Washer (For a “Wells-PW-106” only)
____ K-491 Provision for Hatco Heater
____ K-495 Turn Down Backsplash
____ K-498 Tubular Overshelf 12’ wide (min. 3 ft.)
____ K-499 Stainless Steel Pot Rack
____ K-500 Stainless Steel Apron to cover sink bowls
____ K-508 Special Sizing Charge
____ K-510 Prepare Sink for Undercounter Dishwasher

(24” drainboard or larger)

____ K-520 Poly Board Holder
____ K-550 Stainless Steel Tubular Rack Storage

ACCESSORIES

QTY.

___

K-2B

___

K-2C
____ K-2D
____ K-2E
____ K-2F
____ K-3 Poly-Vance Cutting Board (5/8” Thick)
____ K-30 Faucet Wall Mounting Bracket
____ K-72 Leg To Wall Brace
____ K-397 Wall Bracket for Regaline Sink

____ K-455A Stainless Steel Sink Cover 10"x14"
____ K-455B Stainless Steel Sink Cover 14"x16"
____ K-455C Stainless Steel Sink Cover 16"x20"
____ K-455D Stainless Steel Sink Cover 18"x24"
____ K-455E Stainless Steel Sink Cover 20"x20"

5/8" Poly-Vance Sink Cutting Board For 14"x16" Bowls
5/8" Poly-Vance Sink Cutting Board For 16"x20" Bowls
5/8" Poly-Vance Sink Cutting Board For 18"x24" Bowls
5/8" Poly-Vance Sink Cutting Board For 20"x20" Bowls
5/8" Poly-Vance Sink Cutting Board For 24"x24" Bowls

(Must use K-495)

QTY.

____ K-455F Stainless Steel Sink Cover 24"x24"
____ K-455G Stainless Steel Sink Cover 20"x28"
____ K-457

Replacement Rubber Scrap Block

(See K-456 for install cost)

____ K-474 16 ga., ‘304’ Series S/S Legs with S/S Feet.
____ K-475 S/S Legs with S/S Feet
____ K-478 Stainless Steel Bullet Foot
____ K-488 Flanged S/S Bullet Foot
____ K-493 16 ga., ‘304’ Series Stainless Steel Welded Leg

Assembly with Stainless Steel Feet

____ K-494 S/S Welded Leg Assembly with S/S Feet
____ K-496 Leg Assembly For Grease Trap with Adjustable Cross-

Bracing and S/S Feet

less. Consult factory for larger grease traps)

(For Grease Traps with 15" Height or

F-1a

200 Heartland Boulevard, Edgewood, NY 11717-8380

ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.

© ADVANCE TABCO, DECEMBER 2007