Advance Tabco GSGC1260X Specifications
Sleek Shields
™
CAFETERIA FOOD SHIELDS
WITH STAINLESS STEEL SHELF OR GLASS TOP
Protected by: Patent No. US 9,010,883 B2
Cafeteria Food Shield
with Stainless Steel Shelf
Advance Tabco’s Revolutionary
“Chamber Lock™” System
makes rotating food shields
easier than ever
Maximum Glass Opening is 1-1/2” From Table to Bottom of Glass
(shown with 1” Anodized Aluminum Posts)
Meets Latest
NSF Standards
Cafeteria Food Shield
with Glass Top
Maximum Glass Opening is 1-1/2” From Table to Bottom of Glass
Max. load for Top Glass is 100 lbs. even distributed wt.
(shown with 1” Anodized Aluminum Posts)
Single Tier with Stainless Steel Shelf Single Tier with Glass Top
12”
Length
36” NSGC-12-36 NSGC-15-36 NSGC-18-36
48” NSGC-12-48 NSGC-15-48 NSGC-18-48
60”* NSGC-12-60 NSGC-15-60 NSGC-18-60
72”* NSGC-12-72 NSGC-15-72 NSGC-18-72
84” †NSGC-12-84 NSGC-15-84 NSGC-18-84
96” †NSGC-12-96 NSGC-15-96 NSGC-18-96
108”* †NSGC-12-108 NSGC-15-108 NSGC-18-108
120”* †NSGC-12-120 NSGC-15-120 NSGC-18-120
132” †NSGC-12-132 NSGC-15-132 NSGC-18-132
144”
*3/8” Thick Heat-Tempered Glass Required For Front
†
Requires a single center post
† †
Requires two center posts
WIDE
† †
NSGC-12-144 NSGC-15-144 NSGC-18-144
15”
WIDE
18”
WIDE
Approx.
Wt.
50 lbs.
58 lbs.
66 lbs.
78 lbs.
88 lbs.
99 lbs.
111 lbs.
127 lbs.
142 lbs.
164 lbs.
Approx.
Cu. Ft.
14
18
22
26
30
34
38
42
46
50
12”
Length
36” GSGC-12-36 GSGC-15-36 GSGC-18-36
48” GSGC-12-48 GSGC-15-48 GSGC-18-48
60”* GSGC-12-60 GSGC-15-60 GSGC-18-60
72” †GSGC-12-72 GSGC-15-72 GSGC-18-72
84” †GSGC-12-84 GSGC-15-84 GSGC-18-84
96” †GSGC-12-96 GSGC-15-96 GSGC-18-96
108”* †GSGC-12-108 GSGC-15-108 GSGC-18-108
120”* †GSGC-12-120 GSGC-15-120 GSGC-18-120
132” †GSGC-12-132 GSGC-15-132 GSGC-18-132
144”
Consult Factory for Heat Lamp Modification when mounting to Glass Top Food Shields
WIDE
† †
GSGC-12-144 GSGC-15-144 GSGC-18-144
15”
WIDE
18”
WIDE
Approx.
Wt.
52 lbs.
64 lbs.
72 lbs.
84 lbs.
96 lbs.
110 lbs.
122 lbs.
135 lbs.
150 lbs.
165 lbs.
Approx.
Cu. Ft.
6
8
9
11
13
14
10
11
12
10
FEATURES:
Front glass locks in place at 15º intervals.
Attractive, low profile design & Easy to clean.
Available with 1” tubular stainless steel posts or
1-5/8” stainless steel posts (please specify).
Chamber lock™ is mounted to post in a fixed position.
Includes Two 15-3/8” High Side Panels.
1/4” Heat-Tempered Glass Front & Sides.
Includes:
Stainless Steel Shelving Available In 12”, 15” or 18” Widths.
Shelves have two rolled edges on front & rear and square edges
on left & right sides.
Glass Unit features 3/8” Heat-Tempered Glass Top.
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
www.advancetabco.com
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
CONSTRUCTION:
All TIG welded.
Exposed stainless steel surfaces polished to a satin finish.
MATERIAL:
1/4” Thick Heat-Tempered Side Glass.
3/8” Thick Heat-Tempered Top Glass (GSG Model).
Shelf - 18 Ga., Type 430 Stainless Steel.
1” Post - Stainless Steel.
1-5/8” Post - Stainless Steel.
Chamber Lock™ - Anodized Aluminum.
Finish - Aluminum components manufactured with a standard Satin
Clear Finish. Other colors available for Aluminum Components Only.
Please consult factory for additional colors.
REF-K
DETAILS and SPECIFICATIONS
TOL ± .500” ALL DIMENSIONS ARE TYPICAL
NSGC SERIES SINGLE TIER with Stainless Steel Shelf
1
" (MAX)
1
2
W
L
18"
L -6"
W -5"
C
L
Maximum Front Glass Opening is 13” From Table to Bottom of Glass
NOTE: Glass panels that exceed 66” will require a center support/posts.
C
L
C
L
NSF Requires Side Glass to be 18” Wide Minimum
Clear
L -5"
GSGC SERIES SINGLE TIER with Glass Top
W
18"
L
C
L
1
1
" (MAX)
2
NSF Requires Side Glass to be 18” Wide Minimum. Max. load for Top Glass is 100 lbs. even distributed weight
W -3"
C
L
Maximum Front Glass Opening is 13” From Table to Bottom of Glass
NOTE: Glass panels that exceed 66” will require a center support/posts.
C
L
C
L
L -4"
Clear
L -3"
Standard Concealed Mounting Hardware
Requires access below counter for installation.
Optional Accessories
Surface Mounting Brackets
Use when access below countertop
is not available.
SG-1
Fits 1” Posts
2” O.A. Diameter
(Compatible With All Advance Tabco Food Shields)
1" Tubular Post
2” Maximum
Thickness
3/8" Hole
Required
In Table Top
Concealed Fastener
C
L
REF-K
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, OCTOBER 2015
Loading...