Advance Tabco GSGC-12-120 User Manual
Sleek Shields
™
CAFETERIA FOOD SHIELDS
WITH STAINLESS STEEL SHELF OR GLASS TOP
PATENT
PENDING
Cafeteria Food Shield
with Stainless Steel Shelf
Maximum Glass Opening is 1-1/2” From Table to Bottom of Glass
(shown with 1” Anodized Aluminum Posts)
Single Tier with Stainless Steel Shelf
Length (L)
36”
48”
60”*
72”
84”
96”
108”*
120”*
132”
144”
12” Wide
(305mm)
NSGC-12-36
NSGC-12-48
NSGC-12-60
NSGC-12-72
NSGC-12-84
NSGC-12-96
NSGC-12-108
NSGC-12-120
NSGC-12-132
NSGC-12-144
15” Wide
(381mm)
NSGC-15-36
NSGC-15-48
NSGC-15-60
NSGC-15-72
NSGC-15-84
NSGC-15-96
NSGC-15-108
NSGC-15-120
NSGC-15-132
NSGC-15-144
18” Wide
(457mm)
NSGC-18-36
NSGC-18-48
NSGC-18-60
NSGC-18-72
NSGC-18-84
NSGC-18-96
NSGC-18-108
NSGC-18-120
NSGC-18-132
NSGC-18-144
Advance Tabco’s Revolutionary
“Chamber Lock™” System
makes rotating food shields
easier than ever
Meets Latest
NSF Standards
50 lbs.
58 lbs.
66 lbs.
78 lbs.
88 lbs.
99 lbs.
111 lbs.
127 lbs.
142 lbs.
164 lbs.
Approx.
Cubes
14
18
22
26
30
34
38
42
46
50
Length (L)
Consult Factory for Heat Lamp Modification when mounting to Glass Top Food Shields
Approx.
Wt.
36”
48”
60”*
72”
84”
96”
108”*
120”*
132”
144”
Cafeteria Food Shield
with Glass Top
Maximum Glass Opening is 1-1/2” From Table to Bottom of Glass
Max. load for Top Glass is 100 lbs. even distributed wt.
(shown with 1” Anodized Aluminum Posts)
Single Tier with Glass Top
12” Wide
(305mm)
GSGC-12-36
GSGC-12-48
GSGC-12-60
GSGC-12-72
GSGC-12-84
GSGC-12-96
GSGC-12-108
GSGC-12-120
GSGC-12-132
GSGC-12-144
15” Wide
(381mm)
GSGC-15-36
GSGC-15-48
GSGC-15-60
GSGC-15-72
GSGC-15-84
GSGC-15-96
GSGC-15-108
GSGC-15-120
GSGC-15-132
GSGC-15-144
18” Wide
(457mm)
GSGC-18-36
GSGC-18-48
GSGC-18-60
GSGC-18-72
GSGC-18-84
GSGC-18-96
GSGC-18-108
GSGC-18-120
GSGC-18-132
GSGC-18-144
Approx.
Wt.
52 lbs.
64 lbs.
72 lbs.
84 lbs.
96 lbs.
110 lbs.
122 lbs.
135 lbs.
150 lbs.
165 lbs.
Approx.
Cubes
6
8
9
11
13
14
10
11
12
10
*3/8” Thick Heat-Tempered Glass Required For Front
FEATURES:
Front glass locks in place at 15º intervals.
Attractive, low profile design & Easy to clean.
Available with 1” solid anodized aluminum posts or
1-5/8” stainless steel posts (please specify).
Chamber lock™ is mounted to post in a fixed position.
Includes Two 15-3/8” High Side Panels.
1/4” Heat-Tempered Glass Front & Sides.
Includes:
Stainless Steel Shelving Available In 12”, 15” or 18” Widths.
Shelves have two rolled edges on front & rear and square edges
on left & right sides.
Glass Unit features 3/8” Heat-Tempered Glass Top.
CONSTRUCTION:
All TIG welded.
Exposed stainless steel surfaces polished to a satin finish.
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
www.advancetabco.com
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
MATERIAL:
1/4” Thick Heat-Tempered Side Glass.
3/8” Thick Heat-Tempered Top Glass (GSG Model).
Shelf - 18 Ga., Type 430 Stainless Steel.
1” Posts - Solid Anodized Aluminum.
1-5/8” Post - Stainless Steel.
Chamber Lock™ - Anodized Aluminum.
Finish - Aluminum components manufactured with a standard Satin
Clear Finish. Other colors available for Aluminum Components Only.
Please consult factory for additional colors.
REF-K
DETAILS and SPECIFICATIONS
TOL ± .500” ALL DIMENSIONS ARE TYPICAL
NSGC SERIES SINGLE TIER with Stainless Steel Shelf
1
" (MAX)
1
2
W
L
18"
L -6"
W -5"
C
L
Maximum Front Glass Opening is 13” From Table to Bottom of Glass
NOTE: Glass panels that exceed 66” will require a center support/posts.
C
L
C
L
NSF Requires Side Glass to be 18” Wide Minimum
Clear
L -5"
GSGC SERIES SINGLE TIER with Glass Top
W
18"
L
C
L
1
1
" (MAX)
2
NSF Requires Side Glass to be 18” Wide Minimum. Max. load for Top Glass is 100 lbs. even distributed weight
W -3"
C
L
Maximum Front Glass Opening is 13” From Table to Bottom of Glass
NOTE: Glass panels that exceed 66” will require a center support/posts.
C
L
C
L
L -4"
Clear
L -3"
Standard Concealed Mounting Hardware
Requires access below counter for installation.
Optional Accessories
1" Tubular Post
Surface Mounting Brackets
Use when access below countertop
is not available.
SG-1
Fits 1” Posts
(Compatible With All Advance Tabco Food Shields)
2” Maximum
Thickness
3/8" Hole
Required
In Table Top
Concealed Fastener
C
L
REF-K
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JULY 2014
Loading...